Time difference
Gurus,
I need to write ABAP code in my transformation which will calculate the time difference in seconds.
I have a start date,start time and end date,end time.I need to calculate the difference in seconds.
Can any one give me the ABAP code.I am using BI 7.
Regards,
Sunita
Hi,
Can you please elaborate??
what time units does your start time has??
Is it in hours?minutes? or seconds?
first calcuate days difference:
In the routine include all the four fileds: Start date, start time, end date, end time.
I pressume them as P,Q,R and S respectively.
use FM : HR_99S_INTERVAL_BETWEEN_DATES to calculate the difference of days between the two dates
after u get the days difference multiply with 2460*60.
and if u can tell me the format of the start times and end times then i can write the code for the difference as well
Similar Messages
-
How to calculate the % of time difference between different state
Hi there,
The below query returns the follwoign outptut. I need to calculate the % of time period that a specific state ( state ex: open or closed or all report )exists.
I have to find the time difference between the 2 states . How could I do that ?
The first row shows null for the previous state . How could get actual previous state for the first row?
SELECT si.station_name,
vppstation.avi_control_state_code.STATE_SHORT_NAME,
ash.state_id ,
lag(ash.state_id) over (order by ash.STATE_EFF_DATE desc) previous_state,
TO_NUMBER(TO_CHAR(ash.state_eff_date, 'SSSSS')) "periods in sec",
TO_CHAR(ash.state_eff_date, 'dd-mon-yyyy hh24:mi:ss am') "Date"
from vppstation.avi_state_history ash
left outer join vppstation.avi_control_state_code
on ash.state_id = vppstation.avi_control_state_code.state_id
LEFT OUTER JOIN vpproadside.stations_installed si
ON ash.station_id = si.station_id
where ash.state_eff_date >= to_date('28/02/2010', 'dd/mm/yyyy')
and ash.state_eff_date <= to_date('03/03/2010', 'dd/mm/yyyy') ;
group by si.station_name
ash.state_id
order by ash.state_eff_date asc ;
STATION_NAME STATE_SHORT_NAME STATE_ID PREVIOUS_STATE periods in sec Date
IRDNCST02 Open 1 NULL 85166 01-mar-2010 23:39:26 pm
IRDNCST02 All Report 3 1 85159 01-mar-2010 23:39:19 pm
IRDNCMT01 Closed 2 3 81376 01-mar-2010 22:36:16 pm
IRDNCST02 Open 1 2 78723 01-mar-2010 21:52:03 pm
IRDNCST02 All Report 3 1 76023 01-mar-2010 21:07:03 pm
IRDNCMT01 Open 1 3 55922 01-mar-2010 15:32:02 pm
IRDNCMT01 Closed 2 1 54931 01-mar-2010 15:15:31 pm
IRDNCHA01 Closed 2 2 41291 01-mar-2010 11:28:11 am
IRDNCAS01 Open 1 2 38847 01-mar-2010 10:47:27 am
IRDNCAS01 All Report 3 1 37947 01-mar-2010 10:32:27 am
IRDNCST02 Open 1 3 35332 01-mar-2010 09:48:52 am
IRDNCST02 All Report 3 1 32632 01-mar-2010 09:03:52 am
IRDNCST02 Open 1 3 31502 01-mar-2010 08:45:02 am
IRDNCST02 All Report 3 1 28802 01-mar-2010 08:00:02 am
IRDNCHI01 Open 1 3 25368 01-mar-2010 07:02:48 am
IRDNCHI02 Open 1 1 23939 01-mar-2010 06:38:59 am
IRDNCMT01 Open 1 1 20696 01-mar-2010 05:44:56 am
IRDNCCH02 Open 1 1 13452 01-mar-2010 03:44:12 am
Edited by: Indhu Ram on Mar 11, 2010 1:34 PM
Edited by: Indhu Ram on Mar 11, 2010 2:20 PMIf you look at the table which is output of the given query , there is column called "STATE_ID" It shows the current state ie open or closed or all report.
The column 'PREVIOUS_STATE' shows the state before the current state. .In the table in 2nd row in previous_state column there is state_id = 1 (open)which is the state before 'all report state' -
I have a 50Hz sine wave and a pulse signal on a same graph. The phase difference between two is between 0-90 degrees.
Now I need to calculate the time difference between (when the sine wave crosses zero volts) and (when the pulse rises). The frequency will stay approximately same for both signals.
The application is for a three phase generator. In simple words, when the time difference between the zero-crossing of sine wave and the pulse rises increases, that means that the load on the generator has increases.
I am a beginner user of LabView (version 9, 2009), maybe it is a very simple problem but I've been pulling my hair out for the last few days and coudln't figure anything out. Any help would be greatly appreciated. I am using DAQ USB-6008 to measure these voltages and pulse from the generator and a sensor
I have attached a jpg (a graph that i just made with excel to explain). The time 't' is what I am trying to measure
Cheers
Awais
Message Edited by awais.h on 03-30-2010 11:20 PM
Message Edited by awais.h on 03-30-2010 11:21 PM
Solved!
Go to Solution.Hi
Thanks for the code but I'm afraid it won't work. Like you said the probability of choosing a value that is on both graphs may not happen. This is something that I would like the code to do automatically.
But I did use the previous code posted and made some modifications to it and it seems to work perfectly. Now the next thing is to be able to get just that one value that tells you the first time difference.
Here is what I get using that code.
As you can see from the t Values. I only need the one that is highlighted. If there is a way to filter out the rest it would be great.
I was thinking of a while loop and as soon as the value is higher than 3E-5 it would store the number and stop the loop, but I'm not too familiar with arrays in labview.
Here is the the code modified.
As you can see, it wasn't that big of a modification and it still is your code.
I will keep trying.
Thanks for the help
Attachments:
FinalShockSpeed.vi 55 KB -
Lost connection detection time difference
Having a problem understanding why a broken JDBC connection is detected under Windows much quicker than it is under Linux.
I have an process that opens a connection to MSSQL using JDBC, a Stored Procedure is then executed and the result set
processed, this execute step is repeated every 60 seconds or so. If any exception is thrown then resources are closed, sleep
for 60 seconds, the connection is reopened (if fails then sleeps and repeats), once reopened the process continues. There is logging throughout
the above steps.
On Windows Vista 64bit Sun Java platform the process runs fine, if I deliberately break the connection (stop MSSQL service), the process
logs a problems within 60 seconds and starts handling the error, when the MSSQL comes back then within 60 seonds the connection is remade
and the process continues as expected.
Under Ubuntu 10 64bit both Sun and OpenJDK the process runs fine, until the connectionis broken, as it takes about 17 minutes for the exception to be thrown
for the broken connection (stopped MSSQL) to be detected, as opposed to under Windows taking seconds. Once detected then the process works as expected, retrying
and reconnecting as it should.
The libs and code used are the same the only difference between the windows and linux versions are the logging path parameter, have tried with different versions of Java
and with different MSSQL JDBC drivers.
What could be the reason for the time difference in the lost connection detection between Windows and Linux? Any help tips would be most welcome.
Thanks.The connection is only made once and used throughout, it is only closed if there is a problem. This runs absolutely fine with logging for weeks, the execute and processing take millisecondsIt is pointless to keep the connection in that situation. Create it every time.
Doing that might even fix your problem. But regardless you should still not keep it.
Have jujst checked the timings and if the db connection is broken the on Linux (Ubuntu) the exception generated by step 4. takes up to 15 minutes 35 seconds to move on to step 7. on Windows though it is instant, there is a log message output prior to the execute statement this outputs then the exeception logged.You have an existing connection.
Then you attempt a request which I am guess takes 17 minutes to timeout. (That happens because you are testing by stopping the server.)
That is the problem.
First verify the connection url. It might have timeout values in it.
If not then the next most likely cause is that someone changed the OS (not java) TCP timeout values. Bad idea if they did. And the only way to fix is to change them back to something reasonable. You can code around this by using two threads. One that sets a timer and the other that runs the request. If the timer fires then attempt to cancel the request (see the jdbc api.) -
How to find out time difference between 2 consecutive characters coming in
Hi
Data is coming on serial port and m taking this data in a input stream.I need to know the time difdference between consecutive characters.Any ideas?What do you mean? If you meassure the time between two characters, you want to calculate how accurate it is? First you would need to find out how accurate the System.currentTimeMillis is on the platform you run on. That may be easy
long start = System.currentTimeMillis();
long end;
while ((end = System.currentTimeMills()) == start);
long delta = end - start;But sometimes (on win98) it reports 50, other times 60. So its not quite accurate. But you could redo that test a couple of times and take the avg or the max.
Then if you get a time difference of 0ms between two characters, you know it will be somewhere 0 and 60ms. If you get 60ms between two characters, you know it will be somewhere between 0 and 120 ms. It's +/- delta seconds accurate.
Would this be a way to calculate the percentage accuracy: 100.0-100.0*delta/(time+delta)
Still better to meassure the time over more than just 2 characters unless it is a very slow stream. -
Execution time difference between SELECT & UPDATE statement in JDBC Sender.
Hi Experts,
In my scenario, I have used the JDBC Sender Adapter with the SELECT and UPDATE statement.
Now the problem is in between the execution of Select and update statement, few more entries are coming in the same DB Table.
So result of this is updation take place for those entries which are not even picked up by the select statement.
Can we avoid this execution time difference between the SELECT & UPDATE statemet on JDBC Sender side???
Thanks & Regards
JageshHi
Use serializable option in additional parameters, now all new entries would also be updated. -
How to find the date and time difference in InfoPath 2013?
Hi All,
My date and time format is like: 2013-12-24T10:47:38 and have three fields Start date, End date and Actual time taken.
If start date and end date filled then actual time taken field should automatically should fill, for example 2 days 12 hours 48 min 3 sec.
How to achieve this?Hi Sam,
I believe we had discussed the same issue in the below thread. Can you please refer the below one?
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/d93e16ff-c123-4b36-b60b-60ccd34f6ca7/calculate-time-differences-in-infopath?forum=sharepointcustomizationprevious
If it's not helping you please let us know
Sekar - Our life is short, so help others to grow
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
you see a reply being an answer to the question of the thread, click "Mark As Answer -
How to get exact date and time difference?
Hi,
When i am using the below sql statement:
SELECT (TO_DATE('7/27/2006 05:00:15 PM','MM/DD/YYYY HH:MI:SS PM') - to_Date('7/27/2006 8:30:13 AM','MM/DD/YYYY HH:MI:SS AM')) * 24 hours FROM DUAL;
the output is:
Hours
8.50055555555556
But Actually it is 8.30
So how can i get exact days and time difference between two dates in Oracle?
Thanks....
Regards,
Suman Sakinala
Edited by: SSN on Sep 19, 2008 1:27 AMOr more clearly (this time I have my date_from and date_to the right way around hehe!)
SQL> ed
Wrote file afiedt.buf
1 WITH t as (select TO_DATE('7/27/2006 05:00:15 PM','MM/DD/YYYY HH:MI:SS PM') as dt_to,
2 TO_DATE('7/27/2006 08:30:13 AM','MM/DD/YYYY HH:MI:SS AM') as dt_from FROM DUAL)
3 ,d as (select (dt_to-dt_from)*24 as diff_hrs from t)
4 -- end of dates
5 SELECT TRUNC(diff_hrs) as hours
6 ,TRUNC(((diff_hrs) - TRUNC(diff_hrs))*60) as mins
7 ,TRUNC(((((diff_hrs) - TRUNC(diff_hrs))*60) - TRUNC(((diff_hrs) - TRUNC(diff_hrs))*60))*60) as secs
8* FROM d
SQL> /
HOURS MINS SECS
8 30 2
SQL> -
Send the same message to two receivers with some time difference..
Hi
I want to send the same message to Two receivers with the slight time difference.. becuase but not at the same time.. if the same time means.. just we can specify the two receivers in the one receiver determination..
but if i want to send the same message to Two reveivers with the time difference means..(after sending the message to first receiver.. after some time gap.. i need to send the message to second receiver..
this type of scenarios how can we do.. is it possible to do with out BPM... please suggest me the solution..
Thanks
Jain .PHi Jain,
With BPM you can easily do it.
i am giving you the steps:
1)first add a receive strep to get your message
2)then, put a receiver determination step with a multiline receiver container element assigned to its Receivers property.
3)then, put a block in dynamic mode(ie. ForEach/ParForEach mode) and assign the multiline receiver container element to its multiline element and assign a simple(single line) receiver container element to its current line property.
4) add a send step within the block, choose Receivers List in its Receiver From property and choose the current line receiver element in its Receivers property.
5) then add a wait step in the BPM, in its type select Wait Specified Time Period and then mention the duration in your desired time unit.
**Reward points if helpful...
--Sankar Choudhury -
Stopping a while loop using the time difference of two tick counts
Hi Guys,
I'm currently writing a code which test how long does it take for a formula node to perform its operation. The program uses a while loop to perform the calculation, and the program stops after calculating when tick count has reached 10 seconds. The program then displays the number of iterations it does in 10 seconds.
So initially I created 2 frames of sequence structure. In my first frame I have my initial tick count, and in my second frame I have my final tick count and the while loop. I used the subtract function and divide the output by 1000 to get the time difference. Then using the comparison function, I set if output > 10 then the program should stop, to do this I linked the output of the comparison function to the stop button inside the while loop.
However, when I tried to run the code, the program just didn't run. Hence I created a similar program which puts the last tick count in new frame sequence. When I ran this code, the program never stopped.
Do you guys have any idea what went wrong with my codes.
Thank you!
Erry
Solved!
Go to Solution.
Attachments:
1. Tick Count.vi 27 KB
tickcoun2.vi 27 KBDataflow!
In both VI's the stop terminal of the while loop is controlled by a boolean whose source is ouside of the while loop. So that loop will either run once, or run forever, depending on the value of the boolean that is calculated before the loop starts and shows up at the tunnel going into the loop.
I would recommend looking at the online LabVIEW tutorials
LabVIEW Introduction Course - Three Hours
LabVIEW Introduction Course - Six Hours -
Hi, I have a problem, when I sync my Nokia 6300 with my Outlook calendar the appointment time gets changed on my phone to an hour earlier somehow. It has only recently started doing this, it was fine before. I would appreciate any suggestions. Many thanks
check to see that both your computer and your phone are set in your correct time zone. If they are not the same the phone could be trying to make up for the time difference by altering the alarm times by an hour.
You do not say where you are so I cannot give you your exact time zone.
Have you removed your battery from your phone recently and had to reset the time perhaps? This might have caused the problem
iPhone 5 32GB
MacBook Pro Retina 15" Mac OS X Mountain Lion 10.8.4 -
Calculate time difference in Labview from excel file
I am reading in values from a excel files, the file contains date and time data in one cell, then either an On or Off value in the cell next to it. I would like to find the time difference between the on and the off cycles. The VI I have so far brings in the Excel file but I don't know how to subtract the dates. Any help would be appreciated. I have attached the vi and hopefully I can attach and example excel file.
Attachments:
Hobo Import.vi 156 KBHi Bryan!
I made a small VI (in LabVIEW 7.1) that converts to strings (of your format) to timestamp datatype and then subtracts them resulting in a difference measured in seconds. There might be a more optimal way to do this in your application, but I thought I'd at least try to contribute. Also, notice that there is a Y3K bug in there :-)
Hope this helps!
Travis H.
National Instruments
Travis H.
LabVIEW R&D
National Instruments
Attachments:
FormattoTimeStamp.vi 38 KB -
Time differences between camera and iMovie
Hi,
When I import footage from my Mini-DV camera into iMovie I am seeing a difference between the time displayed on the tape and time displayed in iMovie. The camera says 48 seconds while iMovie says 44 seconds. I thought that it might be related to the framerate of the video in iMovie, but I have changed this to 25 fps which matches the video camera and am still seeing a different time. The framerate needs to be perfect as the footage is going to be shown side-by-side with a animated graph which builds with time.
Does anyone have any idea what could cause this time difference?
Thanks< scratching head > we had something about a NTSC/PAL issue.. hmm.. ?
if possible, open an existing PAL project (window titles says DV-PAL), save it under a diff. name, import into that project, delete the not wanted parts..
another option is, quit iMovie, delete ~/Library/Preferences any com.apple.iMovie.plist file.. relaunch iM.. that 'resets' iM... sometimes, it starts to stumble.. -
Time difference between physical and logical standby
Hi,
I have just been tasked on getting some info and setting up dataguard for some users for read-only/reporting purpose.
The 3 questions I am being asked are:
1. What is the time difference in applying changes from primary to physical standby compare to logical standby
2. What is the overhead maintenance of having a standby database?
3.What latency is involved?
I will be glad to have your input on this.
ThanksHi,
Physical Standy where its a read only DB.
Logs are applied.
Logical Standy where it can be Read / Write DB and the logs are applied in terms of SQL Statements.
Thanks & Regards,
Pavan Kumar N -
Standard function for returninf time difference in days and hours.
Hello all,
Can somebody tell me whether there exists some standard function module which can calculate the time difference and returns the calculated time in the form of days and hours ?
e.g. the time difference between the date 1.12.2007 from 7.00 pm to the date 1.1.2008 till 9.00 pm is
30 days and 2 hours or 30 : 2.
answer as soon as possible.
Thanks and regards,
meThanks a lot ya..
thats an absolutely correct solution to my problem. ) -
How to write a query to get the time difference of two varchar type time columns
Hi,
I want to get the time difference between the two varchar type columns.please see the attached image for more details:
My requirement is like:
timestarted
timeended
timediff
9:00:00
10:00:00
1:00
9:15
9:30:00
0:15Storing time alone as VARCHAR2 value is a incorrect design. Always store it as DATE or TIMESTAMP.
If you already have a messed up design and cant change it, then you need to convert your VARCHAR2 time into a DATE or TIMESTAMP and find the difference. I have converted it to TIMESTAMP and obtained the difference as INTERVAL.
SQL> with t
2 as
3 (
4 select '09:00:00' timestarted, '10:00:00' timeended from dual
5 union all
6 select '09:15:00' timestarted, '09:30:00' timeended from dual
7 )
8 select timestarted
9 , timeended
10 , (timeended - timestarted) day to second diff
11 from (
12 select to_timestamp('01011900' || timeended, 'ddmmyyyyhh24:mi:ss') timeended
13 , to_timestamp('01011900' || timestarted, 'ddmmyyyyhh24:mi:ss') timestarted
14 from t
15 );
TIMESTARTED TIMEENDED DIFF
01-JAN-00 09.00.00.000000000 AM 01-JAN-00 10.00.00.000000000 AM +00 01:00:00.000000
01-JAN-00 09.15.00.000000000 AM 01-JAN-00 09.30.00.000000000 AM +00 00:15:00.000000
SQL>
Maybe you are looking for
-
Data quality check or automation
Apart from passing the report to the user for testing are there ways the process can be automated for a data quality check and how? Thanks.
-
PSE 13 Renderfilter/Beleuchtungseffekte
In PSE 13 finde ich unter Filter/Renderfilter den Ordner Beleuchtungseffekte nicht mehr. Wurde dieser entfernt oder befindet er sich jetzt in einem anderen Bereich. Vielen Dank für die Hilfe hansrobert
-
Droid Maxx apps constantly crashing lately - what's going on?
For the past week or so, my Droid Maxx apps are crashing all the time. The one that really kills me is the Contacts app because so many other apps rely on it. As far as I know there have been no ANdroid updates to this phone in a month or more. An
-
I cannot download any apps used both my debit and credit card and both apple usernames i just dont understand plz help
-
Tree List Value - Passing String
apex4 database 10g EE I have this code which will pass a value to a textfiled but only numbers. How about passing string values in a textfield? Any idea? select case when connect_by_isleaf = 1 then 0 when level = 1 then 1