Time display doesn't update

The time displayed at the top of the screen isn't always accurate. If I haven't used the iPad for several hours and then turn iPad back on, the time doesn't update

There are a few previous threads on this same problem. I would search for:
time AND loosing

Similar Messages

Terminal display doesn't update

I upgraded from 10.6.6 to 10.6.7 last weekend. Since then, Terminal.app doesn't work correctly: I can enter commands, but the window display doesn't update until I click it, so I can't see what I'm typing.
For example, I launch Terminal and a window opens. It is blank. I click it, and my command prompt appears. I enter ls -l, but I don't see what I've typed until I click the window again. I press Enter, but nothing happens until I click the window again ... then the directory list appears.
While writing this note, I also noticed that if I move to another application, the Terminal window also updates at that point. It just doesn't update in real time as I'm running commands.
Has anyone else seen this? And more importantly can anyone suggest a solution?
UPDATE: I just moved my com.apple.Terminal.plist preferences file to the desktop and launched Terminal again ... no problems. Then I replaced the preferences file and launched again ... still no problems. ??? Anyway, it's working for me now, but I'll go ahead and leave this note in case it helps someone else.

There are a few previous threads on this same problem. I would search for:
time AND loosing

Zen V Plus Display Doesn't Update Total Number of Fi

Hi everyone.
I have the Zen V Plus 4 GB unit, and I'm using Vista Home Premium.
I've encountered a problem I haven't been able to solve.
I loaded ,036 audio files onto the unit, using the Media Explorer.
That worked fine.
I then disconnected the Zen V Plus from my computer, and listened to it for a few minutes.
Then, I hooked it back up and added 55 more tracks to it.
Here's the problem: The display should say of ,09 but it still says of ,036.
The 55 new tracks are definitely loaded on the unit.
Shouldn't the number on the display have increased when I added more files?
Here's what I did after noticing the display didn't change:
I went to the Creative web site and downloaded the MP3 Player Recovery Tool, which basically just updates the firmware.
The firmware on the unit is now .5.03_0.05.09.
Next, I formatted the Zen, hoping the firmware would resolve the issue.
This time, I added only 00 tracks, then tried adding another 00.
Media Explorer said there were 200 tracks on the unit, but the display showed only 00.
So, my next step was to format and start all over again, using the Sync Manager.
The same problem, again.
Bottom line: Although I can incrementally add music files to the Zen, the display doesn't update.
Is this a known problem? Does anyone have any suggestions on how to overcome it's
(I mean, excluding formatting my computer and reinstalling Vista and the Creative software, which might be my next step.)
Thank you! J. Danniel

Thanks for the reply.
I have a tagging program, but I neglected to mention is exclusi'vely use WMA format. That doesn't matter.
There are no duplicate files, because I check that before uploading to the unit.
I've figured out a few ways to solve this problem, though. One way is to create a playlist. The Zen displays the correct file count this way.
Another way is to select files via album, artist, or genre, and THEN go back to All Tracks.
Jd

Subvi display doesn't update while it's open

I have a USB data acquisition application, I would like to put all the graphs on a subvi front panel. When a user clicks on "Graph" button on Main Vi, the subvi should open and keep updating while it's open. But I cannot get the subvi to update when it's open. Attached is a program I wrote to simulate the problem I have. The second loop in the main VI won't execute as along as the subVi is open, therefore the new data is not dequeued. Can someone please take a look at my code and see how I can fix this problem? Thanks.
Solved!
Go to Solution.
Attachments:
MainViTest.vi ‏30 KB
displaysubtest.vi ‏9 KB

Here's a very primitive example that shows the main idea. Remember, you don't need to poll the queue. Just wait for the next element (forever!). The loop will stop once the queue is destroyed.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
displaysubtestMOD.zip ‏28 KB

Help tim, XDOLoader doesn't update xdo_lobs if the template exists

Is there something I'm doing wrong parm wise?
java oracle.apps.xdo.oa.util.XDOLoader \
UPLOAD \
-DB_USERNAME apps \
-DB_PASSWORD apps \
-JDBC_CONNECTION sand:1535:NADV \
-LOB_TYPE TEMPLATE_SOURCE \
-APPS_SHORT_NAME VCA \
-LOB_CODE VGMDQCARD \
-LANGUAGE en \
-TERRITORY US \
-XDO_FILE_TYPE RTF \
-FILE_CONTENT_TYPE 'application/rtf' \
-FILE_NAME $VCA_TOP/xml_pub/template/VGMDQCARD.rtf \
-NLS_LANG American_America.US7ASCII \
Here's the message I get:
Parameters passed to XDOLoader...
[TERRITORY] [US]
[FILE_NAME] [com/valspar/NADV/vca/xml_pub/template/VGMDQCARD.rtf]
[DB_USERNAME] [apps]
[XDO_FILE_TYPE] [RTF]
[LOB_CODE] [VGMDQCARD]
[NLS_LANG] [American_America.US7ASCII]
[FILE_CONTENT_TYPE] [application/rtf]
[JDBC_CONNECTION] [sand:1535:NADV]
[LANGUAGE] [en]
[DB_PASSWORD] [apps]
[LOB_TYPE] [TEMPLATE_SOURCE]
[UPLOAD] [UPLOAD]
[APPS_SHORT_NAME] [VCA]
Start uploading...
Target file: VGMDQCARD.rtf
Existing record found in XDO_LOBS, do nothing.: VGMDQCARD.rtf
XDOLoader done successfully: Tue Dec 11 12:13:24 CST 2007
In order to fix, I had to update the LOB_CODE field to have a different name and it worked...However i think the desired functionality should be to update it TEMPLATE_SOURE and TEMPLATE rows FILE_DATA fields.
Thoughts?
Parameters passed to XDOLoader...
[TERRITORY] [US]
[FILE_NAME] [com/valspar/NADV/vca/xml_pub/template/VGMDQCARD.rtf]
[DB_USERNAME] [apps]
[XDO_FILE_TYPE] [RTF]
[LOB_CODE] [VGMDQCARD]
[NLS_LANG] [American_America.US7ASCII]
[FILE_CONTENT_TYPE] [application/rtf]
[JDBC_CONNECTION] [sand:1535:NADV]
[LANGUAGE] [en]
[DB_PASSWORD] [apps]
[LOB_TYPE] [TEMPLATE_SOURCE]
[UPLOAD] [UPLOAD]
[APPS_SHORT_NAME] [VCA]
Start uploading...
Target file: VGMDQCARD.rtf
Creating a new record in XDO_LOBS: VGMDQCARD.rtf
Done creating a new record in XDO_LOBS: VGMDQCARD.rtf

scratch that, I figured it out. I need to add the CUSTOM_MODE FORCE command.

HT1338 I have os 10.5.8 software on my mac and I need to update the software on my mac so I can update my iphone 4s, every time I try to update my mac with the 6.0 it says it doesn't need any updates, but my mac still has 10.5.8.... any help?? Please...

I have os 10.5.8 software on my mac and I need to update the software on my mac so I can update my iphone 4s, every time I try to update my mac with the 6.0 it says it doesn't need any updates, but my mac still has 10.5.8.... any help?? Please...

You must first buy Snow Leopard from Apple: 800-MY-APPLE (in the US)
Make sure your system meets Snow Leopard's requirements:
Mac OS X 10.6 "Snow Leopard" System Requirements
To install Snow Leopard for the first time, you must have a Mac with:
An Intel processor
An internal or external DVD drive, or DVD or CD Sharing
At least 1 GB of RAM (additional RAM is recommended)
A built-in display or a display connected to an Apple-supplied video card supported by your computer
At least 5 GB of disk space available, or 7 GB of disk space if you install the developer tools

Time display not updating on Menu Bar

I have a MacBook Pro 15" Retina laptop running OSX 10.8.3
The time display on the menu bar doesn't update unless I click on it.
Does anyone else have this problem? Are there any solutions? I have not been able to find any discussions about this.

Thanks LexSchellings for your reply and help. I have nominated a time zone and unchecked "set time zone automatically .." as you have suggested. I still need to restart the machine then time will tell if this solves my problem! (Pun intended ... sorry!)
Thank you again for your response!

Icon info doesn't update, and display issues

On my desktop I have my icons set to show information such as drivespace under them. When I empty the trashcan the information doesn't update on the icon, but it does in the finder (finder shows 12gigs, but icon still says 3.4gigs). Is this a common bug or is does it not do this on anyone elses computer?
Also I'm running an external display and sometimes I notice that my primary display looks really bright, when I try to change the color profile it says something about not being able to find the primary display or something like that. This only happens once in a while when I have my external display plugged in. I was running the ATI drivers, but I think the last apple update replaced them with the Apple drivers.
Any help or comments are appreciated

you specified the delay for timer"1000" but not the repeat amount.
your if statement will only run once unless you put it inside the onTimer function.
the new Date() statement sould be outside the onTimer function

Time doesn't update

My new iMac G5 with OS 10.4.3 and 20" monitor is having problems with the Date and Time setting. Whenever I wake up the computer from sleep, the time displayed is between 10 and 20 minutes slow. I have to open the Date & Time system preferences screen, and just by opening the screen, the time then automatically updates. I have tried zapping my PRAM, and have unplugged the power from the iMac after shutting it down to reset the internal clock setting as well. Neither worked. Any ideas on what to do next to fix this little but irritating problem. Sure would be nice to have the correct time displayed automatically. Thanks.

One of the items in the System Preferences Date & Time settings is to set it automatically make sure that the box is checked. You also have the option to choose the reference clock, USA, Europe, or Asia. When you turn on the Mac, or wake it up, the OS will compare the internal clock against the standard and reset it if necessary, you need to be connected to the internet for this happen.
Losing time could be an indication of the battery going down. If you are under warranty contact Apple tech support

HT1338 my MAc Book PRO 13" Retina display will not update. It crashes every time I try to do an update. I have sent in the information on each update but so far nothing back from Apple.

my MAc Book PRO 13" Retina display will not update. It crashes every time I try to do an update. I have sent in the information on each update but so far nothing back from Apple. Also it does not matter what I am trying to update, the operating system, and application, each caused the same crash. This mac book is less than a month old.

That is the highest you will be able to go with 3g. You need 3gs or 4 to go any higher (multi processors and more memory needed). Version 4.2.1 marks the end of your updates for that device.

TS3274 My App Store shows 3 updates but when I go to it the screen is blank. It will not give me the option to update all or one at a time, it doesn't show the apps at all.

My App Store shows 3 updates but when I go to it the screen is blank. It will not give me the option to update all or one at a time, it doesn't show the apps at all.

Many people are having this problem for the last couple of days. This is a problem that Apple has to fix. If you look around the forum, you will see many, many discusssions about this and they have been going on for a few days.
According to Fly150 in another discussion, this is a workaround - for the time being.
If you want to update the Apps while waiting for Apple to fix Updates:
1. Go to App Store
2. Select Purchased
3. Select All
4. Scroll down to find the Apps showing update
5. Select update on the Apps
This should update the Apps and get rid of the update count in App Store.

TS3920 I have a problem after I lock my iphone or it is automatically locked , the time doesn't update. It just freezes at the last time of locking. Please help , it is iphone 5 running iOS7.1

I have a problem after I lock my iphone or it is automatically locked , the time doesn't update. It just freezes at the last time of locking. Please help , it is iphone 5 running iOS7.1
I check with my service provider as well as I synchronized with iTunes , changed time manually with the right time zone. Unfortunately the problem keeps showing

Hi Courcoul
Thanks for stepping by
To tell the truth I forgot to mention that I already did what you said, even more I tried all "reset" options including:
Reset all settings
Erase All content and settings
Reset Network settings
Etc
Even
Reset location and Privacy
It keeps showing the problem

My iPad 2 will not allow me to update my apps. When I hit the update button I get a spinning circle but then it times out and doesn't update. Please help.

My iPad 2 will not allow me to update my apps. When I hit the update button I get a spinning circle but then it times out and doesn't update. In the past when I have updated successfully, the spinning circle would show me an indicator of time left on the update. I no longer have this Indicator. The circle just spins and times out and nothing happens. I've reset the iPad in the settings menu, reset the router, logged in and out of Apple id, powered ithe iPad off and on, and tried a couple other "fixes" that I've read online. So far no luck. AAny help would be greatly appreciated. Much thanks!

How much free space do you have? If it is low, installers may not be able to run properly.

HT5622 When updating my apps am being asked several times for my appleId password and even when providing it, it keeps asking and still doesn't update anything, any suggestions?

When updating my apps am being asked several times for my appleId password and even when providing it, it keeps asking and still doesn't update anything, any suggestions?

Does the username and password you try to use have administrator privileges? You must input an admin username and password to install.

Presenter Display does not update current slide or run timer ...

Hey - I'm a newbee, so forgive me is this is something obvious. When I run my presentation, the Presenter's Display does not update the current slide as the show progresses. Nor does the timer run. Nor are the notes displayed, even though I have checked all the appropriate prefs for all three. Help!

Yes, AIFF or WAV should work. I've never tried importing a SDII file.
A few more caveats, however:
1) A Recorded Soundtrack (i.e. with the Builds and Transitions timed to the audio) may not play back properly in sync if the slideshow is created on one computer and played-back on another; the durations of Builds and Transitions are dependent on the processor speed of the playback computer. SO be sure to check your synchronization on the playback computer! You may need to make some adjustments.
2) It has been reported in numerous threads in this Forum that Synchronizations also frequently fail when exported to other applications - especially when running OS 10.5.
3) Synchronization also fails if the slideshow is played back as a hyperlink. I've found that slideshows will playback just fine if a "stand-alone" Keynote presentation. If linked to others via hyperlinks, however, you will have to trigger all Builds and Transitions yourself.
All of these are known problems with Keynote and it's lamented implementation of audio.

Time display doesn't update

Similar Messages

Maybe you are looking for