Time display in iCal

I recently discovered that I can have the time of each event in iCal appear in the month view on my Mac. I would like to have the same setup on my iPad but don't see a way to do it. Can anybody help?

Not seeing the problem on my system, been running Lion for 2 months.

Similar Messages

Time display in iCal - 12 & 24 hour

Has everyone / anyone else noticed the odd display of times in the new iCal?
My system setting is for a 12 hour clock and times that are displayed with minutes (e.g. 7.30) are shown correctly (i.e. 7.30 AM or PM), however 8 PM is displayed as 20 - and not even 20.00. Times on the hour are flipped into the 24 hour clock, times not on the hour display properly. Odd. Roll on OS 10.71

Not seeing the problem on my system, been running Lion for 2 months.

Change display time zone in iCal?

Hello-
I just moved from the east coast to the west coast. I have Time Zone Support turned on in iCal, and I've set my time zone to Pacific Time in the OS X Date & Time Control Panel. Nevertheless, when I create a new event, it defaults to eastern time and I have to change it, and all my appointment times are displaying with their EDT time in iCal. The time is "correct" -- that is, if I create an event at 12:30 pm it displays in iCal as happening at 3:30 pm EDT -- but it's very annoying. See the screenshot for what I'm talking about. Any help would be very helpful!

See this:
http://macmost.com/mac-calendar-time-zones.html

HT2513 I am using iCal 5.0.1. I want the time displayed in 24hr format. I would also like to schedule events in 24hr format. Any suggestions on how to do this?

I am using iCal 5.0.1. I would like to have my time displayed in a 24hr format instead of 12hr format. I have already set my computer to display time in a 24hr format. How do I do that?

Hello all,
I'm still having this issue and would really like any suggestions if anyone knows of any. Basically, I need to view my calendar that doesn't have any events so I can change the password and get any new events for it.
Because the calendar app does not show the calendar in the calendar listing if it doesn't have any events (not smart btw), I don't have a way to change its information. And attempting to re-subscribe gives me the error that the calendar already exists.
Is there a way that I can view "all" calendars even if they are hidden or don't have any events scheduled for them so that I can change the login credentials? This issue is on the calendar app version 6.0 build 1645 on my mac os x laptop.
I know there has to be a way to do this but I just can't seem to find it and googling is not turning up any results. Even searching my my keychain for the login information and the systems preferences has not shown me anything.
Any help is appreciated. Thanks

So I have been using my iPad for a few months now and I recently noticed that the time display next to the playlist name in the music app that is supposed to display the total song count and time of a playlist is way off. I have a 25 song playlist that 2

So I have been using my iPad for a few months now and I recently noticed that the time display next to the playlist name in the music app that is supposed to display the total song count and time of a playlist is way off. I have a 25 song playlist that is around 2 hours on my computer appears as 2003 minutes on my iPad. It's a smart playlist limited to 25 songs if that makes any difference. Is this happening to anyone else? Any help would be appreciated!

Greetings,
First make an iCal backup, File > Export > Archive.
Remove the following to the trash and restart your computer:
Home > Library > Caches
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache)
Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
__NOTE: Removing these files will remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
Once the computer is back up and running open iCal and test.
Hope that helps.

How change 'home' time-zone in ical?

Hi
Question ... how to change 'home' time-zone in ical?
I have just relocated countries ... to a different time zone.
I use time-zone support in iCal and add time-zone to various tasks.
But when i add a task and note it as my now current time-zone then ical immediately alters the diary placement to assume that i am in my old country/time-zone.
I have altered the region in Preferences/International but this seems to have no effect, in ical at least.
guidance welcomed
ross

In the very upper, right-hand corner of the iCal window is a time zone display, here you can choose to change your iCal time zone.
If you choose "other" from the time zone display's pop-up menu, you get a dialog just like the Date and Time System Preferences.
Why this option is not in the iCal preferences, I have no idea. To me, that would make a lot more sense!
-Doug

Temperature displayed in ical

Hi,
Need some help please! I currently have my high/low temp with sunset time displayed as an automatic event in ical...how do i remove this?
1) I do not have accuweather app -- i checked and no other apps have access to ical
2) it shows under my default calendar; so i can't delete that
3) i remember subscribing to some automator some time ago, but I can't figure out how to unsubscribe to it...it does not show up as a separate account listed under my "calendars"
Please help! Thanks in advance!

It's possible you imported the events into your default calendar. Try deleting one of the events you don't want, if that goes away you know that it is not a subscribed calendar event.
You can search the events if they all have a word that can isolate them. Then you can delete them via the results list.
If the temperature events come back you know that something is running on you Mac to create the events (or adding the data via another service).

How to reset numbers in real time display in Cisco Supervisor Desktop?

Hi all,
I wonder about numbers in real time display in Cisco Supervisor Desktop. There are many statistic number for example : Call Handled, Max Talking, Avg Talking, Max Ready, Total Ready, Call abandoned, etc. Is there any way to reset those numbers back to zero? Please let me know.
Thank you.

Joe,
I haven't tried that, but I'm very skeptical. The CAD Agent gets stats from two places - CTIOS and RASS. RASS keeps the call log information in a SQL Desktop Engine database.
Stats derived from CTIOS reset at midnight. Obviously, restarting the RASS service has no effect on those. Call log information is being kept in a database so it seems to me that a restart of RASS should also have no effect.
I guess I will have to try for myself.
Regards,
Geoff

Image time display discrepancies between product

The following is an example of a problem I've observed in many places in my photo collection.
I have two files taken 8 seconds apart in April 2009 with a Nikon D70 shooting .jpg format. The files were subsequently imported from the camera memory card using a card reader and Photoshop Elements. PSE was also used to add tags to these files.
Since then I've acquired Photoshop CS 5 Extended. The other day I was looking at these files in both PSE and Bridge. PSE shows the time of these two files to be the same (as it should), however, it adds an hour to the actual time the image was taken to adjust for the difference between the time set in the camera (it was Pacific Time) and the time zone where my computer is now located (Mountain Time). When I look at the time on the images in Bridge, one of them shows the correct time in Pacific Daylight Time, but the other is showing the corresponding UTC time value, 7 hours later than the local time. Looking at the file list in Window Explorer shows the "Date" and "Date taken" values to be the same as that shown by Bridge.
There were two other images taken shortly before the first one mentioned above and they show the correct local time. The two files that followed the UTC timed file also show a UTC time value. Then following that the next file shows local time and then there are a number of files showing UTC for time.
If I look at the two files with Windows Notepad so that I can see some of the text strings in the exif data portion of the file, the first file has a couple different places where time is shown in the format "...hh:mm:ss-07:00" and the other in the format "...hh:mm:ssZ". The time value is preceded by the date in yyyy:mm:dd format. It would appear that Bridge is reading these values and displaying them, while PSE is getting some other time value from the file. Here is the actual string from the file that displays in UTC:
exif:DateTimeOriginal="2009-04-05T17:08:10Z" exif:DateTimeDigitized="2009-04-05T17:08:10Z"
and for the file that displays time in local time the string is:
exif:DateTimeOriginal="2009-04-05T10:08:02-07:00" exif:DateTimeDigitized="2009-04-05T10:08:02-07:00"
I've observed this same discrepany with files taken more recently with a Nikon D700 and images in NEF format. I think I can reasonably eliminate the possibility that this is a camera caused discrepancy. I suspect that some program is actually reading the local time and offset, then writing that back to the file as a UTC time value. The behaviors of PSE and Bridge seem to point to the fact that the two programs are extracting time from different fields / strings in the file. At this point the occurrance of the problem seems random, at least I've not been able to discern a pattern and reproduce it at will.
Although this is not a catastrophic problem, it does cause confusion. I've also looked at these files in Lightroom, which on initial inspection appears to get the same time values as Bridge. The down side of this is that files in Lightroom are sorted into time order, which may not be the order they were taken. Although I recognize that these products may not have been design for complete compatibility, it sure would be nice if they all treated time in the same way.

I believe I now have more information about how PSE works and therefore need to slightly correct my original post. It looks like PSE takes what ever time it finds for the photo's "time taken," converts it to UTC, then converts it to the local time on which PSE is running. That will explain why two images taken seconds apart, with on having time coded as local time plus UTC offset and the other having an absolute UTC time, display the time taken in local time. On the other hand, Bridge (and Lightroom) just displays what ever time it finds in the file.

IPhone5s stuck in recovery mode after lots of times displaying blue screen of death, cannot restore it as iTunes displays error 14 on verification, same time phone crashes again with blue screen.

hi, my iPhone5s is only 3 months old, it has been like a whole month now since it started crashing, displaying the blue screen of death, since yesterday it was in the loop of restart-crash, and now it is stuck in recovery mode after lots of times displaying blue screen.
I cannot restore it as phone continues crashing again with blue screen, when iTunes displays error 14 on verification.
help please, this phone is all the means of communication I have.

It's a hardware problem. That's it. You shouldn't bother yourself with this situation. Just see an AASP.

Airport Blank, Time displayed is wrong, spinning wheel of death›

Hi Guys
This is the second time this has happened in the last 3 days.
My airport icon along the top toolbar is blank, even though clearly i am on the internet right now and it's working, and also the time is 50mins out. I went into System Preferences to check if i had the wrong time zone, but it's on the correct one (Wellington, New Zealand) and in System Preferences it has the correct time, yet the time displayed on the tool bar is wrong.
The other day when this happened, i shut my macbook pro (Leopard 10.5.8), and opened again, and it restarted itself, took 10 minutes on the white page with apple logo and spinning cog, and then went to a plain blue screen. I forced it to shut down and started it up and again and this happened again. I couldn't find anything on these forums to help me (on my boyfriends laptop) and went and had a look at my manual, and started up my laptop in safemode, went into my system preferences, went to startup disk and selected my local disk and then restarted my laptop and it has been working fine for the 2 days since then.
About ten minutes ago, i opened up my laptop from sleep and the airport icon is blank and the time is out again, also when i hover over that part of the toolbar i get the pinwheel, but when i hover over the toolbar towards the menus it's fine.
I just opened system preferences to have a look at the start up disk thing again and it's frozen with pinwheel there too.
Help Help Help!
I don't want to shut my laptop off right now because i know i will get blue screen when i try to turn it on again and i won't get any of your replies :P

also just noticed the "wrong time" is actually frozen, it's just frozen on 7:55pm
ta

Does Time Machine backup iCal?

I had a problem with some lost todo items the other day and checked to see if I could see a backup calendar as a quick way to solve the problem. If I am on address book and enter time machine, I see backups of my old address books and if I am on mail, I get all my old mail messages on the screen (though the todo item is grayed out), but if I am on iCal, I simply get the Finder window.
Does Time Machine backup iCal or do I need to do a manual backup and then let Time Machine backup that file from finder?

Since reading some of the first messages, I have been backing up my calendar each week and putting the backup file in my documents folder. I know that file is backed up, so I assume in case of a major problem, I could pull it from Time Machine and restore the data.
Out of curiosity, though, I explored the folders in my library/calendar path and found a number of folders, each containing a file that was dated either today or within the last few days. I assume each folder is for a different calendar and that in case of total disaster, I could restore these from Time Machine.
My question at this point: When I export the calendar from iCal, if the All Calendars option is checked, am I safe in concluding each of the separate calendars would be there? If I accidentally had one calendar highlighted, would only that calendar be backed up?

Nokia 6280 Time Display problem

The problem I am facing is that whenever I set time..it gets back to 00:00 again. I don't know what's wrong with this set.The time display always remains at 00:00. After setting time when I press return to main menu it gain turns to 00:00 . and that is a mess really.I am facing problems tracing back call and text timing etc. Please can anybody help me.
PS:MY problem may sound silly but as I am not much into tech side so it's a huge problem for me at least.

Hi gul011
Sorry i'm out of ideas apart from these instructions!
The clock in idle is enabled by Menu> Settings > Time & Date > Clock > Clock Type > Digital or Analogue
The clock in standby mode is enabled by Menu > Settings > Display > Power Saver > Off
Happy to have helped forum in a small way with a Support Ratio = 37.0

How do I change the new iTunes play list total time display from 1.5 hours format to exact display of 1hr 31min 12sec.

In the new iTunes the play list total time displays in 1.5 hours format, how do I get it to clearly show 1hr 31min 12sec like before, I want the exact time so I can properly fit all the songs when I want to burn this playlist to a disc. You can no longer just click on it to change the display format. Nor can you right click, control click, or change it in options. If anyone knows I would very much appreciate your imput. Thank You.

Actually, that's the problem ... in iTunes *11* it has stopped working. I have the status bar displayed, and it is stuck on the 1.x hours format.
That is very, very strange !!
I can't get that to happen on mine. It worked in 11.0 and I updated today to 11.0.1 and it's OK.
I've tried making a new playlist, I've tried changing an old playlist, smart playlist ...... all OK ????

UCCX 8 - CSD Real Time Display "N/A"

Hello,
We are facing an issue with Cisco Supervisor Desktop real time display "Agent Logs - call" and "Agent Logs - state". These two real time displays show "n/a" while select specific agents (some agents it show data as normal). For the agents who display "n/a" in CSD, in CAD the real time data display as normal.
For example: When supervisor monitor Agent_A in CSD "Agent Logs - call" show "N/A" (the same to Agent Logs -state). But in CAD, Agent_A can see real time display "Agent Call Log Display" as normal (the same to "Agent ACD State Log Display").
Does anyone experience this issue?
It seem that the real time display data in CAD and CSD are getting from the same source. How come the CSD show "n/a" when the data is available in CAD? Any idea, please help.
Many thanks,

Hi Anuj,
Thanks for your response. We are currently running on UCCX SU2. We used to reinstalled CSD/CAD already after we upgrade the UCCX to SU2. Our issue is now fixed by delete the user id of inactive agent from resource page and resync the directory services.
Just a note for anyone who might face similar issue, the recommendation is to first check the version of CAD/CSD running on the client PC (as Anuj suggest) and also comparing the user ID with the UCCX resource page. Be aware that user ID is case sensitive. Check the inactive agent list in the resource page. Delete the user id if you see it there. Then go to Desktop Administrator to resync the directory servcies.
Thanks!

Time display in iCal

Similar Messages

Maybe you are looking for