Time doesn't change!
the time on my iphone 3g is somehow an hour late, i tried ti change it manually through the following steps:
Setttings>general>date & time
but somehow it always returns me back to the home screen, i don't know why?!
Is there another way to manually change the time? Why is it returning me to the home screen?
btw i've got version 2.1
Hi there
Assuming the audio clip is the longest object on the slide, you can fairly easily adjust the slide to match the audio clip exactly. But it will require a small and simple adjustment for each slide. Perhaps this will help?
To make the adjustment, just click the slide in the film strip so it has focus, then click on the time indicator field over in the General section of the properties panel. Type a 1 in the field and press Enter. The slide should auto-adjust to the audio clip timing.
What would be even better would be if we could just select all the slides in the film strip and do that once. But in my testing it fails.
Cheers... Rick
Similar Messages
-
My weather doesn't changes according to time
My weather doesn't changes according to time as after 12:00 am it will remain the same day
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
Also, the US daylight saving time starts tonight. Sometimes the iOS has problems around DST -
Some of the album artwork on my iPod is wrong. I've tried to change it many times but it doesn't change. I've decided that the easiest thing to do now would be to NOT display album artwork on my iPod. How do I set my iPod to NOT display album art? I've checked the User manual and that doesn't help.
Why don't you, instead of taking time to do that, just backup, and then restore your iPod?
Just a suggestion.. -
my ipod touch (generation 4) is not recognized by itunes. I've each time to reinstall itunes, it works few days and suddenly not without reason-only was is reinstallation-reset of ipod doesn't change something.does someone can help me please?
Wow the customer service is even worse. Does Apple want me to go around jailbreaking my iPod now so I can use something that actually recognizes my product?
-
Why the time of the online redo logs doesn't change?
Oracle 11.1.0.7 on windows 2008.I find the time of the online redo logs doesn't change since Jan 18 when I had restarted database,and the time of some datafiles doesn't change either.the database is always online and changes are wrriting to the files, I don't know how this happened?
would anyone help me? thank you.ROCK wrote:
I found some datafiles have the latest date,but the other not. They all have write/read operations on them.
and the switching of the redo logs doesn't change the timestamps of the logfiles since Jan.18 when I had restarted the database. this situation does not appear on the early 8.1.7 database on windows 2000
Does this situation normal?Hi,
Why dont you post the output of the query you are using such as
select group#, first_time, status from v$log;
select name, last_time, status from v$datafile;
select name, CHECKPOINT_TIME, status from v$datafile_header;Time stamp wont change for offline and may be for temp tablespace.
Regards
Anurag -
System time in taskbar doesn't change after corrections
Following by these articles: Time, Linux tips i tried to set time in my Arch GNU/Linux. Each time after all actions i get proper time from timedatectl, but time in taskbar doesn't change. After reboot i get wrong time from timedatectl again.
What should i do?
p.s. I use Arch with Virtualbox if it is important.ayekat wrote:Could you please specify what actions exactly you are taking? The commands you run, for example.
Sure.
1)After turning on my VM, i type timedatectl and
get:
$ timedatectl
Local time: Wed 2015-05-06 13:35:27 MSK
Universal time: Wed 2015-05-06 10:35:27 UTC
RTC time: Wed 2015-05-06 10:35:26
Time zone: Europe/Moscow (MSK, +0300)
NTP enabled: no
NTP synchronized: no
RTC in local TZ: no
DST active: n/a
Current local time is 09:22. Current UTC from here is 06:26.
2)$ sudo timedatectl set-time "2015-05-06 09:28:15"
timedatectl
Local time: Wed 2015-05-06 13:46:46 MSK
Universal time: Wed 2015-05-06 10:46:46 UTC
RTC time: Wed 2015-05-06 06:28:18
Time zone: Europe/Moscow (MSK, +0300)
NTP enabled: no
NTP synchronized: no
RTC in local TZ: no
DST active: n/a
3)$ sudo timedatectl set-local-rtc 1
4)$ timedatectl
Local time: Wed 2015-05-06 13:52:54 MSK
Universal time: Wed 2015-05-06 10:52:54 UTC
RTC time: Wed 2015-05-06 13:52:54
Time zone: Europe/Moscow (MSK, +0300)
NTP enabled: no
NTP synchronized: no
RTC in local TZ: yes
DST active: n/a
Warning: The system is configured to read the RTC time in the local time zone. This
mode can not be fully supported. It will create various problems with time
zone changes and daylight saving time adjustments. The RTC time is never updated,
it relies on external facilities to maintain it. If at all possible, use
RTC in UTC by calling 'timedatectl set-local-rtc 0'.
5)$ sudo timedatectl set-time "2015-05-06 09:36:15"
6)$ timedatectl
Local time: Wed 2015-05-06 09:36:17 MSK
Universal time: Wed 2015-05-06 06:36:17 UTC
RTC time: Wed 2015-05-06 09:36:17
Time zone: Europe/Moscow (MSK, +0300)
NTP enabled: no
NTP synchronized: no
RTC in local TZ: yes
DST active: n/a
Warning: The system is configured to read the RTC time in the local time zone. This
mode can not be fully supported. It will create various problems with time
zone changes and daylight saving time adjustments. The RTC time is never updated,
it relies on external facilities to maintain it. If at all possible, use
RTC in UTC by calling 'timedatectl set-local-rtc 0'.A
Time at taskbar:
ayekat wrote:And after rebooting, how exactly is the time wrong? Is it just the wrong timezone, or is the clock completely off?
So, what i get after reboot:
$ timedatectl
Local time: Wed 2015-05-06 14:08:41 MSK
Universal time: Wed 2015-05-06 11:08:41 UTC
RTC time: Wed 2015-05-06 11:08:39
Time zone: Europe/Moscow (MSK, +0300)
NTP enabled: no
NTP synchronized: no
RTC in local TZ: yes
DST active: n/a
Warning: The system is configured to read the RTC time in the local time zone. This
mode can not be fully supported. It will create various problems with time
zone changes and daylight saving time adjustments. The RTC time is never updated,
it relies on external facilities to maintain it. If at all possible, use
RTC in UTC by calling 'timedatectl set-local-rtc 0'.
Timezone is always right. -
My email says it's checking mail but doesnt find any and doesn't change update time
My email says it's checking mail but doesnt find any and doesn't change update time. Only started today. Have checked settings and tried turning off to no help. Can anyone help?
which email account is it? is it happening with all accounts or just one? Have you tried closing the mail app out of multitasking?
-
The time under the received column doesn't always appear. If I click on the message, it shows but then goes away. It's very inconsistent. Repairing permissions and restarting doesn't change the behavior.
I'm guessing you did not carefully read your owners manual, did you? Unless you are not going to be using your computer for several days at a time there is no reason to shut it down. Your manual states:
_Putting Your MacBook Pro to Sleep_
*If you’ll be away from your MacBook Pro for only a short time, put it to sleep. When the computer is in sleep, you can quickly wake it and bypass the startup process.*
AND
_Shutting Down Your MacBook Pro_
*If you aren’t going to use your MacBook Pro for a couple of days or longer, it’s best to shut it down.* -
I have a problem after I lock my iphone or it is automatically locked , the time doesn't update. It just freezes at the last time of locking. Please help , it is iphone 5 running iOS7.1
I check with my service provider as well as I synchronized with iTunes , changed time manually with the right time zone. Unfortunately the problem keeps showingHi Courcoul
Thanks for stepping by
To tell the truth I forgot to mention that I already did what you said, even more I tried all "reset" options including:
Reset all settings
Erase All content and settings
Reset Network settings
Etc
Even
Reset location and Privacy
It keeps showing the problem -
Edit capture time doesn't work for multiple images
Hi all, hope you can help me.
I'm trying to edit capture time for multiple images. I select the images using the grid view, and go to Metadata>Edit Capture Time>Adjust to Specified Date and Time, enter the time, and select "change all." However, it seems that some, or perhaps most of the images don't actually have a new Date Created when this process is done.
I thought perhaps I needed to select 'write metadata to files', but the Date Created seems to revert back prior to writing to the file, or indeed, it doesn't actually change in the first place.
Any ideas?
Thanks,
JThink I've fixed this using the following site: -
http://www.thexlab.com/faqs/helpviewer.html
Will update if that changes.... -
[SOLVED] systemd/cron as user: timer doesn't start after boot
Hello,
I've tried to follow the wiki's systemd/cron functionality article to have a systemd service to run hourly.
Everything seems to be working ok, except that the hourly timer doesn't start automatically : I have to issue a
systemctl --user timer-hourly.timer start
command every time I start the machine to get the timer running.
Can you help me understand what I'm missing to get the (user) timer to start automatically after boot?
Thanks!
My setup consists of the following files:
/home/myuser/.config/systemd/user:
drwxr-xr-x 2 myuser users 4096 Jun 25 17:30 basic.target.wants/
-rw-r--r-- 1 myuser users 217 Jun 25 10:08 db_backup.service
-rw-r--r-- 1 myuser users 232 Jun 25 10:08 test.service
-rw-r--r-- 1 myuser users 61 Jun 19 12:14 timer-hourly.target
drwxr-xr-x 2 myuser users 4096 Jun 25 10:10 timer-hourly.target.wants/
-rw-r--r-- 1 myuser users 134 Jun 19 12:14 timer-hourly.timer
/home/myuser/.config/systemd/user/basic.target.wants/:
lrwxrwxrwx 1 myuser users 50 Jun 25 10:08 timer-hourly.timer -> /home/myuser/.config/systemd/user/timer-hourly.timer
/home/myuser/.config/systemd/user/timer-hourly.target.wants/:
lrwxrwxrwx 1 myuser users 49 Jun 13 15:51 db_backup.service -> /home/myuser/.config/systemd/user/db_backup.service
lrwxrwxrwx 1 myuser users 44 Jun 25 10:10 test.service -> /home/myuser/.config/systemd/user/test.service
timer-hourly.timer:
[Unit]
Description=Hourly Timer
[Timer]
OnBootSec=5min
OnCalendar=hourly
Unit=timer-hourly.target
[Install]
WantedBy=basic.target
timer-hourly.target:
[Unit]
Description=Hourly Timer Target
StopWhenUnneeded=yes
test.service:
[Unit]
Description=Run a test (echo) job every hour
Wants=timer-hourly.timer
[Service]
Nice=19
IOSchedulingClass=2
IOSchedulingPriority=7
ExecStart=/usr/bin/python /home/myuser/test_service.py
[Install]
WantedBy=timer-hourly.target
db_backup.service:
[Unit]
Description=Backups databases
Wants=timer-hourly.timer
[Service]
Nice=19
IOSchedulingClass=2
IOSchedulingPriority=7
ExecStart=/home/myuser/source/db_backups/db_backup.sh
[Install]
WantedBy=timer-hourly.target
test_service.py is a simple python script that appends the current time to a file, to check if the service is being run by the timer. (it is after I start the timer after boot, and runs correctly every hour)
db_backup.sh is a script that dumps a database into a text file in a mercurial repository, commits the change and pushes it to backup locations.
Last edited by fede (2014-06-25 21:06:09)Have you tried this:
systemctl --user enable timer-hourly.timer -
Time measure has changed from frames to centesimal.
After upgrading from QT 7.2 (or 7.1) to 7.5 today the time measument in the film info window has changed from showing the time in frames to showing it in seconds with decimals.
Now shows time as 00:00:03:96 instead of 00:00:03:24.
I have looked around in the settings but can't find anything related to this.
I use QT-player for animation production, I need to have time displayed as frames.
Is there some way to change this or do I have to revert to my old version (not working with Firefox3)?Yes, thanks, I've noticed that change which is nifty.
But it doesn't change the time display in the info window where before, I could have the time displayed as minutes:seconds:frames. With the new display I can have frames only, not seconds:frames. -
IOS 7 doesn't change the lighting bolt icon when iPhone 4s is fully charged
When I connect my iPhone 4s to a plug and it starts charging, I can see a lightning bolt on iOS7 next to the battery, but when it is fully charged it doesn't change to a plug icon as it used to change on iOS 6. Any suggestions? Does it damage my battery?
Well, for the time being (I mean, if Apple does not go back to the bolt/plug icons) if the device shows 100% then it's fully charged.
But feel free to let Apple know that you want it in http://www.apple.com/feedback -
Toshiba 40TL838 - sleep timer doesn't work or working sometimes
Hi
I bought 40TL838 TV
and i have problem with sleep timer
doesn't work or working sometimes
but usually you can see on the screen one minute left and TV never switch off
i try change language and options also reset system doesn't help
and updates of firmware looks up to date
any suggestions or help pleaseIm not sure if you are on the right forum because this forum is for Toshiba computer systems but lets see if someone with the same device can help.
I dont know what is wrong there but how it works you can read on page 48 in Users manuals document.
By the way: have you tried to contact Toshiba hotline and ask for help? -
Hi, I have recently implemented this code, which doesn't seem to work. When I run, the stopwatch display doesn't change.
Any help is much appreciated. I have pasted the whole code, it;'s ready to be compiled.
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.Date;
import java.text.SimpleDateFormat;
import javax.swing.Timer;
class ButtonListener implements ActionListener
ButtonListener()
public void actionPerformed(ActionEvent e)
if (e.getActionCommand().equals("Start"))
MyTimer.timer.start();
else if (e.getActionCommand().equals("Pause"))
MyTimer.timer.stop();
else if (e.getActionCommand().equals("Reset"))
MyTimer.timer = new Timer(50, MyTimer.timerListener);
public class MyTimer
static JFrame window;
static JLabel label;
static ActionListener timerListener;
static int counter=0, hours=0, minutes=0;
static Timer timer = new Timer(50, timerListener);
static SimpleDateFormat sdf = new SimpleDateFormat("hh:mm:ss");
static Date date = new Date();
public static void main(String[] args)
window = new JFrame("MyTimer");
Dimension screensize = Toolkit.getDefaultToolkit().getScreenSize();
window.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
window.setSize(300,120);
window.setLocation((screensize.width-300)/2, (screensize.height-120)/2);
window.setLayout(null);
label = new JLabel("0:00:00"); label.setBounds(105,20,90,25); label.setFont(new Font("SansSerif", Font.BOLD, 24));
window.add(label);
JButton srt = new JButton("Start"); srt.setBounds(10,60,80,25); srt.addActionListener(new ButtonListener());
window.add(srt);
JButton pus = new JButton("Pause"); pus.setBounds(105,60,80,25); pus.addActionListener(new ButtonListener());
window.add(pus);
JButton stp = new JButton("Stop"); stp.setBounds(200,60,80,25); stp.addActionListener(new ButtonListener());
window.add(stp);
timerListener = new ActionListener()
public void actionPerformed(ActionEvent evt)
counter++;
if (counter<60)
date.setSeconds(counter);
else
if(minutes<59)
date.setMinutes(++minutes);
else
{ date.setHours(++hours); minutes=0; }
counter=0;
label.setText(sdf.format(date));
window.repaint();
window.setResizable(false);
window.setVisible(true);
}Thanks!Alright, now I get this error Cannot format given Object as a Date at this line label.setText(sdf.format(date));
date: Calendar date = Calendar.getInstance();
label: JLabel label = new JLabel("0:00:00");
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.Date;
import java.util.Calendar;
import java.text.SimpleDateFormat;
import javax.swing.Timer;
public class MyTimer
static double counter=0;
static int hours=0, minutes=0, seconds=0;
static Calendar date = Calendar.getInstance();
static SimpleDateFormat sdf = new SimpleDateFormat("hh:mm:ss");
public static void main(String[] args)
final JFrame window = new JFrame("MyTimer");
Dimension screensize = Toolkit.getDefaultToolkit().getScreenSize();
window.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
window.setSize(300,120);
window.setLocation((screensize.width-300)/2, (screensize.height-120)/2);
window.setLayout(null);
final JLabel label = new JLabel("0:00:00"); label.setBounds(105,20,100,25); label.setFont(new Font("SansSerif", Font.BOLD, 24));
window.add(label);
final ActionListener timerListener = new ActionListener() {
public void actionPerformed(ActionEvent evt) {
counter+=100;
if(counter>1000)
seconds++;
if(seconds>59)
minutes++;
if(minutes>59)
hours++;
counter=0;
date.set(Calendar.SECOND, seconds);
date.set(Calendar.MINUTE, minutes);
date.set(Calendar.HOUR, hours);
label.setText(sdf.format(date));
window.repaint();
final Timer timer = new Timer(20, timerListener);
JButton srt = new JButton("Start"); srt.setBounds(10,60,80,25); window.add(srt);
srt.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
timer.start();
date.set(Calendar.SECOND, seconds);
date.set(Calendar.MINUTE, minutes);
date.set(Calendar.HOUR, hours);
JButton pus = new JButton("Pause"); pus.setBounds(105,60,80,25); window.add(pus);
pus.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
timer.stop();
JButton stp = new JButton("Stop"); stp.setBounds(200,60,80,25); window.add(stp);
stp.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
timer.stop();
hours=0; minutes=0; seconds=0;
label.setText("0:00:00");
window.setResizable(false);
window.setVisible(true);
}I think I do need class variable for seconds, minutes and hours, to be able to pause the stopwatch. If I just have one variable that is the starting time, it would make things more complicated.
Maybe you are looking for
-
DeskJet 970CXi - Windows 7 - Network Printer - Drivers solution
Hi all, i was looking for a solution to install my Deskjet 970CXi as a network printer, using Windows 7. I didn't find anything directly concerned the network installation but only for local printer through USB port. Many people are bored and tired a
-
New links will not open in a tab, only in the main window
with firefox 21, links will not open a new tab, only in the main window. I have set the option for tab opening, but it still will not work
-
Date field should be different
Hi Iam creating an application in web dynpro.In that labels "From Date" and "To Date" labels are present. In that i created Context of type "Date". I written code like this. Date date=new Date(); java.sql.Date today=new java.sql.Date(date.get
-
1. Transparancy 2. Font settings in Edge Animate do not match Muse font settings ( letter spacing ) 3. On a text asset applying a Blur filter and have it fade to zero doesn't work. Zero seems to be at 1 even though it says zero Thanks, Peter McCabe
-
Essbase services abnoraml shutdown with Get token for user
Hi, We are facing essbase services abnormal shutdown, with a .xcp file in XCP file showing below given error, for this issue we have added __GETUSERTOKEN TRUE value in our .cfg files but it's not working. Exception Log File: /ap01/gema/hyperion/essba