Time error message
I have two airport extreme n basestations in a roaming configuration. One of the base stations has no problem connecting to the NTP server time.apple.com. The other keeps playing the same error message over and over: "No Address for NTP server time.apple.com". The basestations have unique names and internal manual IP addresses on my LAN. They share the same network name and password, as is supposed to be the case for a roaming network. They both connect through a cable DSL router. Is there an issue with this error prone base station?
I actually solved the problem by reloading the 7.1 firmware from the menu in the airport utility. I guess it didn't update properly the first time. I had given unique names to each base station but for simplicity, I had tried to use the same password for both. This is apparently a BAD thing as the aiport utility would intermittently connect to the wrong base station and actually rename it for me (e.g. Basement(2)). After giving each base station a unique name and password and reloading the 7.1 firmware, everything works as expected. No more time error messages.
Similar Messages
-
Run time error message when I try to open itunes?
I cannot open itunes afte using it for 3 years. I receive a run time error message.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT) as you start iTunes, then going to Edit > Preferences > Store and turing off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2 -
Iam getting run time error message when i try to open dream weaver cs4
iam getting run time error message when i try to open dream weaver cs4
exact message am getting when i try to open dreamweaver cs4- this application has requested the run time to terminate in it in an unusual way . please contact the applications support team for more information.
-
I have a problem with my iCal, when I use my caldav account, I can only see my own calendar on my MBA, on my co-workers MBP it works fine with both my account and his. My co-worker can't see other calendars than his own when he uses iCal on my laptop.
We can reproduce this problem on his computer by setting Location to Automatic rather than Amsterdam, then after deleting iCal's cache files, the caldav account and setting the Location back to Amsterdam solves the problem for him.
It does not solve the problem for me (or several other co-workers). We've been looking at this for a few weeks, and we can not find any clear pattern why certain machines have this problem and others don't.
All machines (both affected and unaffected) are running Mac OS 10.7.2 with iCal 5.0.1
I've spoken to Apple support over the phone (in the Netherlands), unfortunately, they couldn't help with this.
So far we've tried numerous location and language settings, but on affected machines nothing appears to solve the delegation problem (which we assume to be connected to the error messages iCal generates)
Starting iCal yeilds the following error messages in /var/log/system.log:
Jan 5 11:31:05 dhcp-91 [0x0-0x58f58f].com.apple.iCal[23884]: line 1,1: expecting FREQUENCE, found 'BYDAY' as token type 5
Jan 5 11:31:05 dhcp-91 iCal[23884]: iCalendar recurrence failure BYDAY=-1SU;FREQ=YEARLY;BYMONTH=3
line 1,6: unexpected char: '='
Jan 5 11:31:05 dhcp-91 [0x0-0x58f58f].com.apple.iCal[23884]: line 1,1: expecting FREQUENCE, found 'BYDAY' as token type 5
Jan 5 11:31:05 dhcp-91 iCal[23884]: iCalendar recurrence failure BYDAY=-1SU;FREQ=YEARLY;BYMONTH=10
line 1,6: unexpected char: '='
Jan 5 11:31:05 dhcp-91 iCal[23884]: Unexpected EOF, returning last token as fallback
Jan 5 11:31:05 dhcp-91 iCal[23884]: VTIMEZONE does not match System Time Zone (Europe/Amsterdam) for 20100105T000000 to 20120105T000000: (
"interval: 2001-01-01 01:00:00 +0100, offset: 3600"
) != (
"interval: 2010-03-28 03:00:00 +0200, offset: 7200",
"interval: 2010-10-31 02:00:00 +0100, offset: 3600",
"interval: 2011-03-27 03:00:00 +0200, offset: 7200",
"interval: 2011-10-30 02:00:00 +0100, offset: 3600"
BEGIN:VTIMEZONE
X-LIC-LOCATION:Europe/Amsterdam
TZID:Europe/Amsterdam
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZNAME:CEST
TZOFFSETTO:+0200
DTSTART:19700329T020000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZNAME:CET
TZOFFSETTO:+0100
DTSTART:19701025T030000
END:STANDARD
END:VTIMEZONE
Jan 5 11:31:05 dhcp-91 [0x0-0x58f58f].com.apple.iCal[23884]: line 1,1: expecting FREQUENCE, found 'BYDAY' as token type 5
Jan 5 11:31:05 dhcp-91 iCal[23884]: iCalendar recurrence failure BYDAY=-1SU;FREQ=YEARLY;BYMONTH=3
line 1,6: unexpected char: '='
Jan 5 11:31:05 dhcp-91 [0x0-0x58f58f].com.apple.iCal[23884]: line 1,1: expecting FREQUENCE, found 'BYDAY' as token type 5
Jan 5 11:31:05 dhcp-91 iCal[23884]: iCalendar recurrence failure BYDAY=-1SU;FREQ=YEARLY;BYMONTH=10
line 1,6: unexpected char: '='
Jan 5 11:31:05 dhcp-91 iCal[23884]: Unexpected EOF, returning last token as fallback
Jan 5 11:31:05 dhcp-91 iCal[23884]: VTIMEZONE does not match System Time Zone (Europe/Amsterdam) for 20100105T000000 to 20120105T000000: (
"interval: 2001-01-01 01:00:00 +0100, offset: 3600"
) != (
"interval: 2010-03-28 03:00:00 +0200, offset: 7200",
"interval: 2010-10-31 02:00:00 +0100, offset: 3600",
"interval: 2011-03-27 03:00:00 +0200, offset: 7200",
"interval: 2011-10-30 02:00:00 +0100, offset: 3600"
BEGIN:VTIMEZONE
X-LIC-LOCATION:Europe/Amsterdam
TZID:Europe/Amsterdam
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZNAME:CEST
TZOFFSETTO:+0200
DTSTART:19700329T020000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZNAME:CET
TZOFFSETTO:+0100
DTSTART:19701025T030000
END:STANDARD
END:VTIMEZONE
And when I close iCal I get:
Jan 5 11:33:25 dhcp-91 [0x0-0x592592].com.apple.iCal[23894]: token mismatch: 4 != 5I'm seeing the same thing, and I can't even find where OS X stores calendars on disk anymore...
-
I asked this question several months ago and got no answer so will try again.
It is weird, but when I try to watch a streaming video on the Apple web site or the Adobe site, I get a message saying that my Quicktime plugin in out of date. I am able to say play this time, but don't know why I am getting this message. I have both 7.6 and 10. What is going on?
Thanks
Judywhen I went to open would not saying there was a quick time error....not sure what to do.
What's the precise text of the error, please? (There's a few different ones I can think of that you might be getting.) -
Hi,
I have problem opening template in WAD on my computer. I will get the below error message every time i am trying to open a template.
My WAD version is Release 2004s, Patch 700, Revision 172.
Does anyone encounter the same problem before?
[http://img2.freeimagehosting.net/uploads/5758023e39.jpg]>
Claire Tan wrote:
> Hi,
>
> Thanks for your help.
>
> I managed to get my WAD working after i installed 7 patches from SAP market place but i still have problem in WAD.
>
> When i click on a dropdown box in my WAD template, the properties panel on the left didn't refresh by itself.
>
> Has anyone encounter this problem before?
>
> I am currently on support package 17, patch 1, revision 452 for my WAD.
>
>
> Thanks.
Hi,
Thanks for your prompt reply.
I closed WAD and get it restarted twice and the problem above is solved.
Here it comes another problem, when you click on execute button, it will pop up a page in Internet Explorer.
I managed to log into the portal but later got this javascript error:
Line: 98
Char: 7
Error: Access is denied.
Code:0
URL: https://blahblahblah....my template name
Do you have any idea what went wrong this time?
I am running WAD version - BI AddOn 7.x(based on 6.40), support package 17, patch 1, revision 452
My internet explorer version - 6.0.2900.2180.xpsp_sp2_qfe.070227-2300
Thanks -
Migration from Access97 - Run time error message
When I am trying to migrate from Access 97 to Oracle 8i Using Migration Work Bench I am getting the following error message.
Microsoft Visual C++ Run Time Library (Message Title)
Runtime Error
Program: C:\ProgramFiles\Oracle\jre\1.1.7\JREW.EXE
Abnormal Program Termination
OK (button to click.)
Please help me with your valuable input.
nullAnd is a boolean operator. Try it like this instead:
Select Case ComboBox1.Text
Case "Banks"
Sector = "Bank"
Index = -0.086
Case "Mobile Telecommunications"
Sector = "Mobile Telecommunications"
Index = -0.024
Case "Real Estate Investment Trusts"
Sector = "Real Estate Investment Trusts"
Index = 0.132
End Select
Still lost in code, just at a little higher level. -
I cannot access my openoffice documents. I keep getting a run time error message
When I try to open any OpenOffice.org 3.0 file I get a message that says Run time error! This application has asked the Run Time to terminate it in an unusual way.
Please try updating to version 19.0
Please check if all your plugins are up-to-date. To do this, go to the [http://mozilla.com/plugincheck Mozilla Plugin Check site].
Once you're there, the site will check if all your plugins have the latest versions.
If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure. -
Run TIme Error Message- Array Out of Bounds Exception
Good evening all,
I seem to have a run time error with the below segment of code. I've changed the (args[0]) a variety of ways but still get the same message.
I have a few questions regarding my methodology. First, am I headed down the right path (no spoonfeeding allowed please! I need to grasp and learn this myself). Second, would it be something causing error that is on another line and I'm not seeing it. Third, should I have added the entire class file?
public static void main(String [] args) throws IOException
Inventory store = new Inventory ( 15); // Sets store inventory
Scanner inFile = new Scanner(new File(args [0])); // _Line 27 in the program_
PrintWriter outfile = new PrintWriter(args [1]);
String temp; .
double price;
int quantity; .
inFile.next();
int x = 0; Run time error received:
java.lang.ArrayIndexOutOfBoundsException: 0
at StoreBusiness.main(StoreBusiness.java:27)
Thank you in advance everyone.WarriorGeek wrote:
Thanks Flounder,
I feel pretty dumb after posting my answer.
I read the arrays tutorial and understand all that's described there but with what I've learned you have to start your array out at zero like I did. Should I use the variable name that I gave it in lieu of zero?No. The point is that since you didn't provide any arguments when you started your program, there is no arr[0] or arr[anything else]. It doesn't matter if you put an int literal between the brackets or a variable or a method that returns int. You can't access elements that don't exist.
So instead of java MyClass you need to do java MyClass something The "something" becomes args[0]. If you're using an IDE instead of the command line, there will be a place to configure what arguments you want to pass when you run your program. -
While trying to update from reader 8.1 to readerXI, install has failed 5 times after getting an error message that 8.1 is using files that need to be updated (it is not running): operating system is windows xp, version 2002. Do I need to uninstall 8.1 before trying to update, and how can I be sure that XI will install correctly and not leave me holding an empty bag if I do this and the download still does not install
I always recommend to uninstall old versions when upgrading and skipping versions.
If you have difficulties uninstalling, use http://labs.adobe.com/downloads/acrobatcleaner.html -
What causes "Cannot save alias This alias cannot be saved atthis time" error message
"This alias cannot be saved at this time" message results from attempt to create an alias in Mail. I have 3 of 3 aliases emaining. The alias chosen does not duplicate an existnng one.
same problem here... 3 of 3 remaining + error message when trying to create a new alias.
My girlfriend's account was a newly created icloud account and aliases can be created successfully.
However, my account was migrated from the old mobile.me. Wondering if this is the possible cause?
Maybe try creating a brand new icloud account and see if the problem persists. The issue then becomes an apple fault. -
I'm not sure how or why this is happening and it has just started...I tried to update and then it would not allow me to open the file at all giving me a runtime error message and multiple windows (because of the help feature). It has been successfully reinstalled but I'm still getting the error message...what do I do?
Hello, MommaLloyd24.
Thank you for visiting Apple Support Communities.
Here are the steps I would recommend going through as they should resolve the issue.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
Jason H. -
Custom run time error message into C# UI
Hi,
I'm trying to get the error message for the last step into my C# UI (using TestStand3.5).
I've tryed the GetRunTimeErrorMessage in the UIMsg_Trace message event, but it doesn't work.
Probably I should use the PostStepRunTimeError callback instead? Is there a sample code available in C# using it?I'm getting the error code and the message, se below, but I also want to get the location info as in the standard TS error popup.
The boolean Occurred parameter seems to be false even if I get an error. Is it reset to false or something?
int frameID = 0;
errorCode = axExecutionViewMgrs[index].Thread.GetSequenceContext(0, out frameID).AsPropertyObject().GetValNumber("Parameters.ErrorLoad.Code", 0);
details = axExecutionViewMgrs[index].Thread.GetSequenceContext(0, out frameID).AsPropertyObject().GetValString("Parameters.ErrorLoad.Msg", 0);
location = axExecutionViewMgrs[index].Thread.GetSequenceContext(0, out frameID).AsPropertyObject().GetValBoolean("Parameters.ErrorLoad.Occurred", 0); -
Why would I repeatedly receive a download error message when memory is sufficient?
Uh, maybe it's a server problem, and unrelated to you or your device?
-
I get a error message when I select an element in the combo box, please review my variables:
Public Sector As String
Public Index As Decimal
...and code
Select Case ComboBox1.Text
Case "Banks"
Sector = "Bank" And Index = -0.086
Case "Mobile Telecommunications"
Sector = "Mobile Telecommunications" And Index = -0.024
Case "Real Estate Investment Trusts"
Sector = "Real Estate Investment Trusts" And Index = 0.132
End SelectAnd is a boolean operator. Try it like this instead:
Select Case ComboBox1.Text
Case "Banks"
Sector = "Bank"
Index = -0.086
Case "Mobile Telecommunications"
Sector = "Mobile Telecommunications"
Index = -0.024
Case "Real Estate Investment Trusts"
Sector = "Real Estate Investment Trusts"
Index = 0.132
End Select
Still lost in code, just at a little higher level.
Maybe you are looking for
-
Error Message "This iPhone cannot be used because..."
I am trying to use my iPhone with a new laptop. I installed iTunes most recent version and it works fine. When I plug my iPhone in, I get an error message: "This iPhone cannot be used because the Apple Mobile Device service has not been started." I h
-
Open CSV output in default CSV viewer without CSV file?
I can run a SELECT statement, export the data to a CSV file, and start my CSV viewer (Excel in my case) to see the data. Is there a way to not have to save the CSV file and just have my default CSV viewer start up with the exported data in it? Mike
-
Adding a subject in the subject line of mailto
Hi I have created some code in the CO with setDestination(mailto). When the customer clicks the link it will open up an email page. Is it possible to populate the subject line in the email with code in CO? Thanks Andrew
-
User specific transaction varient
Dear all, I am having a requirement, for the tcode J1IH the posting date should be made as display field for all users except for one specific user. 1) For the above requirement i have kept 2 transaction varient. 2) One varient is used to make posing
-
Apple wireless keyboard not working
There is a button which when pressed several times stops the keyboard working. What is it?