Time Evaluation quota not transferred

Hi,
For a couple of employees when i run time evaluation, quota type 91 gets generated and transferred but quota type 93 does not. It remains 0.
On analyzing the logs, i found that for these employees, there is an entry in table QTTRANS with the quota amount that was supposed to be transferred.
According to doc on help.sap.com, {Table QTTRANS indicates the status of the transfer pool for each day. The cumulated entitlements are indicated until they have been transferred to the *Absence Quotas *infotype (2006) or until the entitlement has expired.}
This means the quota amount for quota type 93 is being generated, but is not being transferred to infotype 2006. Also, the transfer time in the rule is not being shown on ad-hoc basis for these two employees for this particular Quota type. The other quota type 91 which is evaluated on exactly the same basis is working fine.
I have checked the transfer period in config and it is monthly. Also, for other employees in the same grouping PSG, ESG, quota is being generated and transferred correctly.
Quota of 2.5 should be transferred on the last day of every month.
Further, analysis of QTTRANS over a period of time reveals the following results:
Jan05 Quota transferred : 0 ;Table QTTRANS: 2.5
Feb05 Quota transferred : 2.5 ;Table QTTRANS: 2.5
Mar05 Quota transferred : 2.5 ;Table QTTRANS: 5.0
Apr05 Quota transferred : 7.5 ;Table QTTRANS: 2.5
May05 Quota transferred : 10 ;Table QTTRANS: 2.5
Jun05 Quota transferred : 10 ;Table QTTRANS: 5.0
Jul05 Quota transferred : 10 ;Table QTTRANS: 7.5
Aug05 Quota transferred : 17.5 ;Table QTTRANS: 2.5
Sep05 Quota transferred : 20 ;Table QTTRANS: 2.5
Oct05 Quota transferred : 20 ;Table QTTRANS: 5.0
Nov05 Quota transferred : 25 ;Table QTTRANS: 2.5
Dec05 Quota transferred : 25 ;Table QTTRANS: 5.0
For the entire year, it should have generated and transferred 30 but actually it is 25.
I would be very grateful if anyone can point out the cause of this issue.
Thank you,
Regards,
Zubair

HI,
You can view in IT2006 accumulated Quota means current year Quota + carry over Quota. In Time cluster tables "QTTRANS" you can view Quota transfer value.
Refer T.code: Pt66 for Time cluster tables.

Similar Messages

  • Time Evaluation quota in previous tax year

    Hi all
    Can anyone please advise:
    Problem:  Because of various issues, quotas need to be adjusted via 2013 for quotas in a previous tax year to ensure quotas are correct up to date i.e. add to one and deduct from another.  System won't allow retro because of the tax year.  Table T569R date is fine. IT0003 date also won't allow change before tax year.
    Is there a way to get around this without opening a tax year?
    Your assistance is appreciated.

    HI,
    You can view in IT2006 accumulated Quota means current year Quota + carry over Quota. In Time cluster tables "QTTRANS" you can view Quota transfer value.
    Refer T.code: Pt66 for Time cluster tables.

  • Managed Clients and Time Machine Quota Not Working

    We operate a Mac OS X 10.6.4 Server with 10.6.4 Clients; the clients are all bound to the OpenDirectory and all the laptops should be backed up using TimeMachine Server. Therefore we created a computer group which contains all the client machine records of the laptops and defined managed TimeMachine preferences for this computer group:
    - the TimeMachine server URL: afp://server.domain.tld/TimeMachine/
    - „startup volume only“, „skip system files“ and „back up automatically“ are enabled.
    - and a backup limit of 50 GB is set.
    If I run „mcxquery“ on the laptops, the settings are displayed. And the TimeMachine backup works.
    But … but the size limit of 50 GB isn’t respected, all client images grow „infinitely“.
    $ mcxquery
    com.apple.MCX.TimeMachine
    AutoBackup laptops (Computer Group) always 1
    BackupAllVolumes laptops (Computer Group) always 0
    BackupDestURL laptops (Computer Group) always afp://server.domain.tld/TimeMachine/
    BackupSizeMB laptops (Computer Group) always 51200
    BackupSkipSys laptops (Computer Group) always 1
    What am I missing!?
    Thanks
    Alex

    I presume the bought a time machine means a time capsule.
    How did you migrate the Time Machine files?
    From where? A Time Capsule or external drive?
    It is difficult to get TM working with Yosemite.. since it doesn't work after the upgrade on the old TM backup.. it will not work on the migrated files either.
    You simply start a new backup and store the old backups for a few months until you are ready to dump them.
    The instructions for inheriting old backups is B5 and B6 here.
    http://pondini.org/TM/Troubleshooting.html
    However it is just unlikely to work.. TM in Yosemite is very different. Broken even.
    I also strongly recommend people to use Carbon Copy Cloner or some other 3rd party backup until Apple get the bugs fixed. And after several months.. they are still rampant.

  • Not able to generate the absence quota WITHOUT Time Evaluation

    Hi ALL,
    When i try to generate the absences quota for employees without time evaluation using program RPTQTA00, I am not able to generate it.
    And i am getting "E You have not selected any generation rules".
    Kindly if any one come across this issue please throw some light and do a favour.
    thanks all

    Hi,
    Pls check the follwing tables if u have made correct assignments
    v_t559l
    v_554s
    v_556c
    Check Quoma Feature
    Check what status u selected in IT7
    Check if ur using correct Schema
    If ur Using RPTQTA00 then use No Generation,and if ur using PT60/RPTIME00 change it to Increase.
    Check if u have maintained correct quota groupings.
    Revert back if its not solved
    Regards

  • Absence quota should not get generate in Time Evaluation

    Hi All,
    For some employees we lock the payroll. But whenever we run the time evaluation every month employees  who are under lock payroll their absence quota is getting generated every month. It should not happen..
    Please provide solution for this....
    Regards,
    Sita

    Hi,
    Due to some reasons  some employees payroll data was stopped for payment. for this they delimited in  infotype 0001 start date and payroll area to 90 ie. stop payment.
    So whenever they run time evaluation every month through payroll area wise the employees who are under stop ment their quota is also getting generated. How to stop generating quota?
    Regards,
    Sita

  • Absence quota generation with PCR in Time Evaluation

    Dear All,
    I am generation absence quota Annual leave = 50 through PT60- ZM04. Its daily calculation and transfered at the month end.
    The quota entitlement is 30 days per year.
    I have written this pcr. Have configured a time type too. but not sure why its not generating any quota.
    The time type I have configured is:
    Time Type: 0097
    Save as day balance - No Formation
    Save as period balance - 1
    Store for time accounts - 1
    Have assigned the time type 0097 in Base entitlement for Absence quota generation as Day Balance and even in generation rules.
    Have placed the PCR with ACTIO Z003 before CUMBT fucntion.
    The PCR Z003 is:
    000010 D HRS?0
    000020 *
    000030 = D OUTAQTYP
    000040 = **
    000050 = 50 Z GCY ZQTY
    PCR ZQTY is:
    000010 D OUTWPMOLGA
    000020 **
    000030 99 HRS=FR50C ADDDB0097Z ADDDB0097 HRS=D0097
    I didnt mention anywhere in configuration or PCR that its 30 days per year.
    Do I need to do this?
    Have I missed out anything, please help me.
    Thanks & regards,
    Majid

    Hi,
    This you can do through config also without using PCR.
    Base entitlement is 30 for calender year. Selection rule- Accrual period is daily and transfer time is time evaluation period.
    Use appropriate rounding rule in selection rule.
    Rgds,
    Lata

  • Time Evaluation - To generate quota on first of every month  Quota Func

    Hi Friends,
    thers is an issue regarding quota generation on first of every month as standard functionality it will generate on end of every month but i want it to generate on first of every month without using RPTQTA00
    Waiting for a positive response
    Thanks In Advance

    Hi,
    Even i am facing issue in the same scenario..Inspite of making accural period as " Time Evaluation Period" it still gets transferred at month end & not at the start of any month.
    Is there any other workaround other than Job scheduling .
    Regards,
    Megha

  • Use of Time Evaluation to generate Absence Quota

    Hi,
    We are planning to use time evaluation to generate absence quota. At the moment we are using RPTQTA00 report to generate Absence Quota. We have negative time management and since, the project has already gone live i have very limited scope to change the basic settings for example we do not have any employee subgroup to identify part time employees, PT & FT are in one employee sub-groups. We have only one ESG & PSG for time recording, time quota etc. The base entitlement is defined for the FT employees and it is reduced propertionately based on the employement percentage in IT0007. Now we are going to adopt a change in design, and planning to have specific work-schedule for PT employees. In that case, we will not have the scope to maintain %age in IT0007 for part time employees but exact no of working hours will be used. It means that system will treat the PT emploees as FT while generating absence quota and output the FT absence entitlement. As i said earlier we can not differentiate PT employees from FT employees based on ESG or PSG, i can not create a separate quota selection rule for part time employees. Hence, we are moving from running RPTQTA00 report to time evaluation for absence quota generation purpose.
    Now can anybody please help finding a alternate solution for the above, if it is possible to do it through report RPTQTA00 or we have to adopt the time evaluation. In case we are going to generate absence quota through time evaluation, can we only generate absence quota and skip anything that is related to payroll.
    Any comments/suggestion/advise will be very helpful to us.
    Thanks.
    Sujit

    We are not able to generate absence quota for part-time employees as when we do that, system is treating PT employees as FT employees and the FT base entitlement is referred while calculating absence quota. i can not define separate absence entitlement for PT employees as we have only one ESG and PSG, and based on this quota selection group is defined. The QUOMO feature is defined based on work contract - employee sub-group (there is no separate emp sub-group for PT employees) - Pay Scale Group. We are having this problem as we have specific work schedule for PT employees now (Ex. we create 3 days work schedule with 15 hours: 4.5,4.5, 6 hours) and we are not maintaining employement percentage for them. So system is treating PT employee as FT employee with 100% employement percentage. Please let me know if you need any specific info to understand my issue.
    Thank you so much for the response.

  • Absence Quota creation during Time evaluation - Orgnaisational Assg change

    Hello Experts,
    I have one emplyee for whom the Transfer action has been run - his personal subarea has been changed from 1633 to 1654
    obviously the ps grouping for time quota type changed form 35 to 40.
    so function QUOTA is creating different quota for this employee than what there exist right now for infotype 2006.
    so during time evaluation below error is comming.
        Error entry no. 83 Error when creating absence quota
        A complex application error has occurred
    Kindly let me know how to overcome this error.
    Thanks Jay

    The reason 'error no. 83' occurs in RPTIME00 is because function QUOTA
    is trying to generate a quota type which does not exist for the employee
    on a specific day. It must have existed some time before.  Normally,
    the function QUOTA displays an error message concerning the
    non-existing quota types. In this case, the 'error no. 83' can only
    occur in the following scenarios:
    1. If you deleted a quota type that was to be generated
    2. If an employee has an organizational reassignment to a personnel
       subarea or employee subgroup which have different groupings for quota
       types and for these groupings the 'old' quota type does not exist.
    Function QUOTA checks to determine if the quota types to be generated
    are valid.  If the quota type is not valid anymore (see reason 2) then
    you will get a warning message.
    "the problem in these situations was the following:
    RPTIME00 is trying to generate a quota for a validity interval
    (defined in table T559D) during which the employee belongs to two
    different groupings, due to the transfer.
    In your case the quota type should be generated with a validity interval
    that begins before the employee's organizational change.
    Unfortunately, for the time between the validity begin up to the
    transfer of the employee there is no entry in table T556A for this quota
    type.
    or check the config of this quota running Rptquota_check in se38
    Therefore, it is possible to solve the problem by defining a dummy
    quota type for the 'old' groupings of the employee (table T556A).

  • Absence quota addition after Time Evaluation

    Hi Experts,
    This is regarding Time Evaluation.
    Time Evaluation Configuration is fine. Absence quota is getting generated in days.
    But while adding to the previous balance it's treated as hours and the net balance is coming as hours.
    Example, Absence quota from previous year = 15 hrs
                    Quota generated = 0.77 days
                   After generation the total is 15 + 0.77 = 15.77 hours.
    Please advise what could be the problem . Thanks

    Hi ,
    Thanks for your reply.
    Cause :
    Actually the employee had moved from one Personnel area to another but due to the settings same Absence quota was applicable to the employees in both cases.
    Now i am not able to delimit the record in 2006 from transfer date.
    Edited by: Tomesh Sahu on Jul 21, 2009 10:17 AM

  • Absence Quota Change ( Without Time Evaluation )-Change in Holiday Calendar

    Hi Experts, We have scenario where we need to change the holiday calendar. Add additional holiday. This can be done through SCAL and after that we can generate work schedule through PT01 for the month where the holiday is added. We are not using time evaluation. Our time manangement status is 0 in IT0007. The input I require is how to correct the absence quotas of employees for which they have applied leave for the period where the new given holiday is created. Please advise. Thanks in advance. Regards, IFF

    Hi,
    Standard SAP provides TCode PT_UPD00 for this purpose. It calls program RPTUPD00 which creates a batch input session for revaluating absence and attendance records. You can use this program to resave all the leaves which overlap the given date which is now a public holiday.
    I hope this information is helpful for you and resolves your query.
    Thanks and regards,
    Vivek Barnwal

  • Absence quota zero after Time Evaluation

    Dear friends,
    We are generating Absence quota automatically after Time evaluation. But CL/PL/SL leave quota generated is zero after TE.
    Even I am not able to edit Absence quota(IT2006) manually or through IT2013.
    Please guide me, what needs to be done.
    Regards,
    Nayak

    Hi Dracula,
    Thanks for your response. No am not able to simulate the situation, it happen just once in PRD server.
    I do agree that some one might have chaned the value. But if the quota is generated by time evaluation then you cannot changed the record directly in infotype (2006). Time evaluation generated quota can be changed on through infotype 2013.
    I do request all the expert please share your thoughts.  Please do let me know what could be the problem here.
    Regards
    Sandeep

  • How to Update Absence Quota with Time Evaluation

    Dear Friends,
    I would like to know how do we update absence quota within time evaluation. Currently i'm using UPDTQAXX, it works but when i search this forum everybody was using this simple code:
    HRS=something
    ADDDBxxxx
    and the quota is updated. I just dont get it, with adddb its only update the daily balance table, how does that enable us to updated the 2006 infotype? Many Thanks

    ADDDBxxxx adds the value of the number of hours field to the specified time type in the table of day balances (TES), it does not update the quota.
    You can use function QUOTA  to accrue absence entitlements periodically based on this customizing: Personnel Time Management>Time Data Recording and Administration>Managing Time
    Accounts Using Attendance/Absence Quotas>Calculating Absence Entitlements>Rules for
    Generating Absence Quotas>Define Generation Rules for Quota Selection.  
    You can use a time type to prorate that accrual

  • Quota updation upon accural in no time evalution(TMSTA=0)

    Dear Team,
    We went go live on one and half year back and  using no time evaluation for all employee in info type 7.
    At the time of financial year starting we will generate Absence quotas say CL, PL through RPTQTA00,
    Entitlement is 12 days,Hence April month it self, record will be created in info type 2006.
    In mid of month/year Joining employee, based on prorate base entitlement will be updated in info type 2006.
    Now Client/My requirement is:
    He does" t want to give total entitlement in april it self. every month 1 leave needs to updated. (12 days entitlement for CL, hence prorate base 1 day in April once we run in Payroll, 2 days (11) in May, 3 days (11+1) in june.. so on and so fourth...
    How we can configure this. Please help me on this.
    Regards,
    MVR

    Hi,
    Try the following setting.
    SPRO -> IMG -> Time Management -> Time Data Recording and Administration -> Managing Time Accounts Using Attendance/Absence Quotas -> Calculating Absence Entitlements -> Rules for Generating Absence Quotas -> Set Base Entitlements
    In this select your Quota type and give ENTITLEMENT CONSTANT as 1.
    RELATED TO PERIOD as Accrual Period
    SPRO -> IMG -> Time Management -> Time Data Recording and Administration -> Managing Time Accounts Using Attendance/Absence Quotas -> Calculating Absence Entitlements -> Rules for Generating Absence Quotas -> Define Generation Rules for Quota Type Selection
    In this, double click your Quota Type then Goto Accrual Period Tab and select Month
    Now, the  Program RPTQTA00 has to be run run every month with suitable Data Selection Period
    Thanks and Regards
    Kiran

  • Absence quota 31 cant be accrued by time evaluation

    Hi
    while i run tim evaluation i get error like absence quota 31 cant be accrued by time evaluation,i configured generation rules & also written rule to update quota 31.Any suggestions where i went wrong??how to correct this error??
    Thanks&best regds
    Shaila

    Hi
    Actually i had written sub schema for this..bcoz this URL is eligible for those employees who are Cash processing officer & also based on personnel area we have to check wheter particular employee is Cash processing officer or nt if yes then only update 1day URL  to 2006 IT, if the employee is working on Public holiday..for updating i had written this PCR..ZMN1 Public holiday indicator(timetype), 31 is my quota group.
    HRS=1
    varstprsnt
    N
    Y
    HRS=DZMN1
    ADDDBZMN1
    UPDTQ31

Maybe you are looking for