Time Evaluation to be changed from Annually to Daily

Hi Friends,
Good Morning !!
I am facing an issue from my client...It is, we have generated the absence quotas for the employees in Production System upto 31/12/2007 and each employee's entitlement of leave upto 31.12.2007 is stored in their Absence quotas infotype 2006.
Now, my client doesn't want his employees' to view their absence quotas upto the end of the year. (Employees can see their absence quotas through ESS and can apply for leave thru ESS). They want to display only the "Earned/Accrued Leaves" quota only upto the date i.e., they wish the system to generate the absence quotas "Daily" instead of "Annually".
Now, I have generated the absence quotas through t-code PT60 for all the employees from their hiredate to the end of year.
Now, I couldn't understand what to do to make the system to generate automatically absence quotas "daily" .....that too I have generated until the end of this year.....They want it now to change the config settings and make absence quotas generate automatically on daily basis......
SAP System came to LIVE from April 2007.
Can any expert help me what I need to do.......
This is an urgent requirement please......
Thanks in advance,
Sai

hai
yes deleting the data is not easy because u may have employees who might have already utilized some of the leaves.
like in say earned leave if a person has used 5 leaves and now according to his accural for a these three months is only 3 then waht happens.
you have to take a back up of all the records 2001. 2006 then generate and
upload 2001 again.
you have to validate these records. then only you can take a decision.
u can delimit 2006 and then from now on tranfer on daily accural can be done.
just try and see delimiting the records for this date and check any errors are coming.
because when u delimit 2006 the 2001 record should not have morethan the quota
number.
regards
nalla

Similar Messages

Absence Quota creation during Time evaluation - Orgnaisational Assg change

Hello Experts,
I have one emplyee for whom the Transfer action has been run - his personal subarea has been changed from 1633 to 1654
obviously the ps grouping for time quota type changed form 35 to 40.
so function QUOTA is creating different quota for this employee than what there exist right now for infotype 2006.
so during time evaluation below error is comming.
    Error entry no. 83 Error when creating absence quota
    A complex application error has occurred
Kindly let me know how to overcome this error.
Thanks Jay

The reason 'error no. 83' occurs in RPTIME00 is because function QUOTA
is trying to generate a quota type which does not exist for the employee
on a specific day. It must have existed some time before. Normally,
the function QUOTA displays an error message concerning the
non-existing quota types. In this case, the 'error no. 83' can only
occur in the following scenarios:
1. If you deleted a quota type that was to be generated
2. If an employee has an organizational reassignment to a personnel
   subarea or employee subgroup which have different groupings for quota
   types and for these groupings the 'old' quota type does not exist.
Function QUOTA checks to determine if the quota types to be generated
are valid. If the quota type is not valid anymore (see reason 2) then
you will get a warning message.
"the problem in these situations was the following:
RPTIME00 is trying to generate a quota for a validity interval
(defined in table T559D) during which the employee belongs to two
different groupings, due to the transfer.
In your case the quota type should be generated with a validity interval
that begins before the employee's organizational change.
Unfortunately, for the time between the validity begin up to the
transfer of the employee there is no entry in table T556A for this quota
type.
or check the config of this quota running Rptquota_check in se38
Therefore, it is possible to solve the problem by defining a dummy
quota type for the 'old' groupings of the employee (table T556A).

How do I change from annual to monthly?

Hey, I am currently enrolled with the Photography CC and wanted to upgrade to the "whole thing" after doing the trials of a few of the other applications. I went through the upgrade prompts, expecting that any time they would offer me a choice between annual and monthly but I updated my credit card info and was sent an email telling me I had enrolled in the annual plan. I can budget 39.95 month to month but six hundred dollars right now is quite a bit. How can I change?
- Sam

In case you are unable to get the option to get the monthly CC, you can contact Adobe Support via http://adobe.ly/yxj0t6.
They shall check whether the present CC can be cancelled & new order can be placed,(in such instances the cancellation fee is waived off)
Regards
Rajshree

PSE changes time of pictures when changed from RAW to JPEG?

The RAW files of my pictures show the true time the picture was taken. But when I save the file as a JPEG format, it adds more hours to the actual time. What is causing PSE to do this and how do I correct it??

Or have you stripped the Metadata during the Export.....if you have "Copyright Only" selected in the Metadata section of the Export dialog, all original dates are stripped, and you'll get only the file created/modified dates (which will be the date/time of export).

Change from hourly to daily backup

Can I change my time machine to less frequent backups?

Heiring wrote:
However does anyone know if I can recover files from the Windows backup file directly to a new Mac
I don't do Windoze; you'll probably get better results in the +Windows compatibility forums,+ at: http://discussions.apple.com/forum.jspa?forumID=687
Partly, it will depend on the format of the external HD; OSX can read and write MS-DOS(FAT) and ExFAT volumes, and read (but not write) NTFS-formatted volumes. But there are 3rd-party apps that will.
See: [Switch 101: Migrate your Windows files or system to your Mac|http://support.apple.com/kb/HT2518].
Furthermore an additional question - is the transfer of emails and stuff from Outlook to the Mac-mail program straightforward or...
Some of that is covered in the link above, and a link within it.
You might also want to review [Switch 101|http://www.apple.com/support/switch101>.
There are some video tutorials, and a bunch of text tutorials here: http://www.apple.com/findouthow/mac/
Hope anyone will be kind enough to spend a minute or two convincing me not to replace my dead HD with a new Win 7 HD but a Mac instead.
Most folks who switch wish they'd done it looooong ago. There is, of course, a bit of a "learning curve," as some things are done differently. The longer you've used Windoze, the harder it will be to learn new habits.
But a new Mac will cost a lot more $$$ than a new HD.

Cross Day work issue in Time Evaluation for positive recording.

Dear Experts,
We would like to know whether anyone else has faced the below described issue before or has any suggestions for the same.
Issue Background: We are uploading time events from the clocking recording system into SAP using an interface program. The clocking events are loaded without indicator 'M' and based on whether they belong to current day then assignment is '=' and '<' for previous day assignment.
Issue Description: Some operational staff have planned daily shifts from 00:00 - 08:30. Hence they can clock-in before 00:00 on the previous day and since there is no 'Next Day Indicator' in SAP, we split the time events so that if the clock-in is at 23:00 previous day then the time pairs are formed as
23:00 - 24:00 Current Day with Day assignment '='
00:00 - 08:30 Next Day with Day assignment '='
When we run the time evaluation, the day assignment for Next day pair 00:00 - 08:30 is automatically changed to '<'. This makes the Next day without any events and the time evaluation throws error in the next day.
Now instead of automatic upload, if we manually upload the same time events, the records are as follows:
23:00 - 24:00 Current Day with Day Assignment '+' and Origin Indicator 'M'
00:00 - 08:30 Next Day with Day Assignment '+' and Origin Indicator 'M'
Now if we execute time evaluation, the behaviour is as per expected and the time evaluation doesn't change the day assignment for any records.
Work Around Proposed: Keep atleast 1 sec difference between the time events say the above records can be uploaded as follows:
23:00 - 23:59 Current Day with Day assignment '='
00:00 - 08:30 Next Day with Day assignment '='
But we would like to avoid this if possible.
Summary: In brief we would like to know whether why time evaluation has different processing for Origin indicator 'M' and SPACE.
Many thanks for your inputs in advance, thanks.
Regards,
Roshan.

Hi,
see thread
Time evaluation -early clockin for shifts starting at midnight ?
maybe of interest
bg
Edited by: bg on Sep 16, 2010 9:26 AM

Time Evaluation Re Run in Mid Month & Mid Mont Initialization !

Hi There,
i was trying to run Time evaluation for the period 01.04.2011 to 31/12/2011.
from April, that is 01.04.4011 to 30.06.2011 Time evaluation was good, now time evaluation has to run from 01.07.2011 but time evaluation has repeated from 12.06.2011 to 11.07.2011 as Initialization period 07/2011, and the same scenario is repeated for the rest of the year..all periods are initiated on 12th of each month from 6th month that is 12.06.2011.
i was been trying to rectify this issue but was not bale to solve it, could any one please look in to it and let me know how to solve it?
your help is appreciated.
Thanks
Kumar

Can you please regenerate Period Parameters for 2011 year in T-Code for OG00 for period parameter 01 and then give the hire date in the field Forced Recalculation as of run in PT60 and run the time evaluation.
Best Regards,

Time Evaluation Re Run

Hi There,
i was trying to run Time evaluation for the period 01.04.2011 to 31/12/2011.
from April, that is 01.04.4011 to 30.06.2011 Time evaluation was good, now time evaluation has to run from 01.07.2011 but time evaluation has repeated from 12.06.2011 to 11.07.2011 as Initialization period 07/2011, and the same scenario is repeated for the rest of the year..all periods are initiated on 12th of each month from 6th month that is 12.06.2011.
i was been trying to rectify this issue but was not bale to solve it, could any one please look in to it and let me know how to solve it?
your help is appreciated.
Thanks
Kumar

Hi,
thanks for reply but till now i have not yet customized the schema or any pcr, so it is pretty much standard TM04 schema, could you plz elaborate your answer?
Thanks.
Kumar

Switch has changed from "no rotate" to mute - HELP

I reluctantly updated my ipad to the newest OS and now my "no rotate/rotate lock" switch mutes my audio instead of is previous function. Please tell me how to stop my ipad screen from rotating automatically. When i purchased the ipad this feature was there so i am sure it would not have been taken completely away, please help - this is frustrating.

Did you bother to search this forum? This has been answerered dozens of times. The switch changed from orientation lock to notification mute. To lock orientation, you go to the multitask tray (hit home twice), slide the tray to the right, and click the lock icon.
Matt

BI 7 real-time cube load behavior changed after transport

Dears,
After I transported real-time cube from DEV to QA system, I found that all the real-time cube load behavior changed from 'can be loaded, planning not allowed' to 'can be planned, load not allowed'. What happened? Or I'm enpackaging this type cube with wrong step? Any suggestions are appreciated.
Best regards,
Gerald

Hi,
I think note 984803 can be usefull for you.
The link is https://websmp207.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=984803&_NLANG=E
Rgs
Antonino

How/ where to change a weekly off to working day, working day to weekly off by maintaining IT0007 is 7-time evaluation without payroll integration

Dear Experts
We are doing Negative Time Management where we record only deviations
But customer has third party time machine which required to be integrated with SAP system
As I know, from the time recording terminal, i should map SAP number to all employees and then get a text mail the details with employee attendance for the respective dates and times. Then, have to create a ABAP report which will read the text file and update clock in/out with date into SAP system. After this we can check employee attendance infotype 2011.
But, Before going for above, time administrator wants to set IT0007 as 7- time evaluation without payroll integration, then maintain data in IT0050 & IT2011
Then run Time Evaluation then the out put will be according to the data maintained in IT 2011. Now the requirement is, time administrator wants to change eg. the day is suppose to be working day for any employee but based on adjustments that day became weekly off, another employee suppose to work but again due to some adjustments that day became weekly off, so how this time administrator can change this and where. This is like, time administrator need to see the total work schedule for an employee and needs to change whichever data and whenever or after time evaluation, he could see the total work schedule as desired.
And also, time administrator wants to change schedule manually for any of the employee during that particular period and view the same.
Please note that, ESS/MSS haven't implemented yet.
Appreciated all your prompt responses to this.
Thanks
SS

No
I have created a workschedule on wednesday In a year there can be weekly off 5 or 6 times on Saturday or Sunday So in that case there is no need to create three workschedules we can create one workschedule and change the days Again we need to regenerate the workschedules inorder to take 'off's" in to account. that is what iam thinkinng at the moment. Yes there is no need to do anything in IT 007 If there is any change in Shift in that Case User has to change workschedule in IT 007.
If there is weekly off he can select the dates on which day it is falling and generate the workschedule.
for changing shifts he should change work schedule in IT 007
Is this is right approach please throw some light on this
My client requirement was Sometimes there can be weekly off in the company It can be either wednesday off or saturday off or
unday off or it can be any day.
Edited by: My SAP Cronies on Feb 2, 2012 5:17 AM
Edited by: My SAP Cronies on Feb 2, 2012 5:22 AM

Why is does my apple run SLOW.you go to open a program and the circle thing just spins for a delayed period of time. You change from typing in a word doc and go to say email or internet and it takes several minutes to allow you open anything up. Like it

Why is does my apple run SLOW.you go to open a program and the circle thing just spins for a delayed period of time. You change from typing in a word doc and go to say email or internet and it takes several minutes to allow you open anything up. Like it is frozen. I have tried rebooting the computer and it works for a few minutes then gets stuck.

Which model iMac do you have?
How large is your HD and how much space do you have left?
Check out the following & do the necessary:
User Tip: Why is my computer slow?
What to do when your computer is too slow
Speeding up your Mac
OS X (10.6.6)
Use Software Update or the OS 10.6.8 combo update to update your OS. Also, update everything SU has to offer for your computer. When done, repair permissions and restart your computer.

Absence Quota Change ( Without Time Evaluation )-Change in Holiday Calendar

Hi Experts, We have scenario where we need to change the holiday calendar. Add additional holiday. This can be done through SCAL and after that we can generate work schedule through PT01 for the month where the holiday is added. We are not using time evaluation. Our time manangement status is 0 in IT0007. The input I require is how to correct the absence quotas of employees for which they have applied leave for the period where the new given holiday is created. Please advise. Thanks in advance. Regards, IFF

Hi,
Standard SAP provides TCode PT_UPD00 for this purpose. It calls program RPTUPD00 which creates a batch input session for revaluating absence and attendance records. You can use this program to resave all the leaves which overlap the given date which is now a public holiday.
I hope this information is helpful for you and resolves your query.
Thanks and regards,
Vivek Barnwal

How to change the date generate absence quota(Time Evaluation)

Hi all experts,
Currently system use Time Evaluation, and generate absece quota in last day of month.
So any way to change that system will use differ day to generate absence quota?
Example use day 28 of each month will generate absence quota? Have any enhacement or configuration?
Thank you,

Tatsuya,
there 2 better solutions for this, one is Generate Period Parameters and according accordingly the month end date you follow and use the same period parameter in V_T559L table to your Quota.
and other Solutions is Write a PCR like Below.
ABCD     (PCR Name)
   varstcrumo
        Varstreday
             28
               hrs=1
               adddbTIME (TIME - Daily Time type - Create it in V_t555a table)
Save it and go to TM04 Schema, and put this PCR with Function ACTIO and make sure to insert this before QUOTA Function and Before CUMBT. and save it, and dont forget to put TIME Time to your Base entitlement.
you can run Time Evaluation to test it...let me know how it worked.

I need to change from Japan App Store to Australia App Store. I get this every time I try using My MacID: "This Apple ID is only valid for purchases in the Japanese iTunes Store. You will be switched to that Store." What next TY. JohnCahill

I moved from Japan to Australia. I need to change from Japan App Store to the Australian App Store. I get the following message every time I try using My MacID which was set up in Japan: "This Apple ID is only valid for purchases in the Japanese iTunes Store. You will be switched to that Store." At one point... by which path I do not remember... I was instructed to created a new ID. I fill out the new ID forms, but the address is rejected each time... quite confusing. Does it want a new name? But it says I cannot use an apple domain (tag?) even though I guess it has to be an apple address... ? So I have iTunes crdit cards purchansed in Australia, can't spend in AUstralian iTunes Store, get directed back to Japan each time, and can't open a new ID... What am I doing wrong? Thank you in advance. John. Australia.

You must have a separate Apple ID registered in the other store along with a valid bank-issued charge card in the other country, and a legal billing address in the other country.
Sorry... But... You cannot use other countries itunes stores.
You must be within the Country with a Valid Billing Address and Credit Card for that Country to use the iTunes Store of that Country..
iTunes Store Terms of Service
http://www.apple.com/legal/itunes/us/terms.html#SERVICE

Time Evaluation to be changed from Annually to Daily

Similar Messages

Maybe you are looking for