Time events storage place

What is the table for info type 2011?
Where Time Events stored
Thanks in advance

Pleas check table TEVEN.
you can also use FM "HR_EVENT_READ"
Best Regards

Similar Messages

HT2128 I am on Mac Lion. I about 36 photos frodownloadedm a friends storage place online.? I usually select about 10 at a time and view in preview (default) to make my selections. But Lion is saying blahblah.jpg is an application downloaded from the inter

I am on Mac Lion. I downloaded about 36 photos from a friends storage place online.?
I usually select about 10 at a time and view in preview (default) to make my selections. But Lion is saying "blahblah.jpg is an application downloaded from the internet. Are you sure you want to open it?" These are files not applications (jpg's)
Is there no way to change this and not get the question every time? I will have to do it for every picture one at a time- what a pain. The older operating system did not do this.

It's possible, but not recommended unless you're an advanced user who understands the risk. Install the free application "TinkerTool" (not "TinkerTool System"), select the Applications tab, and check the box labeled "Don't show quarantine warnings for downloaded files." Log out and log back in. This action will disable the built-in protection against malware. You've been warned.

Multiple entries in TEVEN for one time event created by HR-PDC

Hi experts,
we have a SAP certified time attendance system connected to our ERP 6.0 system by HR-PDC interface.
Now it happens from time to time that exactly one time event causes multiple entries in SAP table TEVEN and therefore is shown in the check report PT40.
The number of duplicate records is always different - up to about 140 entries for one and the same time event in the worst case.
Except the field PDSNR all the other fields contain exactly the same values.
I have checkt many of the problematic bookings and I have always just one correct time event in the source application and there is only one data record in the corresponding IDOC too.
Also the number of transferred records shown in the protocol spool of the report SAPCDT45 is correct and identical to the number of records in the IDOC.
The first place where I can identify the problem with the duplicate records is the table TEVEN.
No records are left in the interface table CC1TEV.
I have seen that within one block of identical time bookings in TEVEN the field PDSNR ist not numbered in one sequence but there are gaps in between that are used for any other entries.
As I can see in historical entries of TEVEN the problem exists already for years so it does not seem to be in direct connection with the latest support pack or something like that.
The relevant jobs run every 15 minutes whereby SAPCDT45 is started 5 minutes after RPTCC106.
Has anyone else experienced this strange behaviour or knows what I could further investigate?
Many thanks for your replies in advance and best regards
Günter

Hi Carlos,
thanks for your fast reply.
It seems that an entry for Status A00 or A05 would solve my problems and of course I will try to handle it by this view.
But do you know whether there is any possibility to find out how it comes to these repeated postings?
I do not know whether the repeated postings happen in the same package (IDOC) or in an earlier package and to be honest I do not think that the record comes from the source application a second time because there I could find only one record that seems to be correct.
I also cannot understand how it comes that I have even 140 "identical" entries for one time event.
Could you please let me know your thoughts about that?
Anyway I thank you for offering a solution - even if I do not understand the reason for the pborlem.
Thanks and best regards
Günter

Can I use a time capsule in place of mac mini?

Can I use a time capsule in place of mac mini as a backup storage?

If you mean as a TM backup target.. that is what the TC is designed for..
If you mean as a media player centre with all your itunes etc.. no it is a failure.. the TC has no media players.. no smarts at all. It is a hard disk in a wireless router.. nothing more.

USB External drive has become a storage place in windows 8.1

I let windows make my Toshiba USB drive become a storage place. Now it's as two different drives, one is called TOSHIBA USB (F:) and one is a storage place, I made it a storage place and now it's full and I tried to remove it from storage, and that's when
it became a TOSHIBA USB drive again, but, it's located in storage as two different drives and it's also in removable drives list as a Toshiba drive. How do I get it out of being a storage place, it's still got files on it that I don't want to loose I was using
it as a backup drive and I made it a storage drive. How do I get them both out of storage drive and back where it goes without loosing my files that are on it. I've got a 1TB Seagate external USB drive that is formatted and I may make it a storage drive and
use it for file history and some back up. Should I do that or should I just let it be a USB drive and use it for file history? Either way how do I remove or detach my Toshiba drive from storage? Please help I've tried everything I know. Thanks, Brad.

Hello and Thanks MeipoXu, Well it's to late! I got frustrated after searching windows and microsoft websites and forums, so, I chatted with a damg geek squad "agent" and he talked me into doing what I knew I could do four hours before I got them
and had him do a remote assistance. Well to make a long story short we faut for a while and he led me to believe there was no other way except to reformat the drive and loose all of my files! I got ahold of them thinking they would have a solutiion to the
problem not reformat and loose everything! I'm very upset with the geek idiots and I've left terrible feedback as I do every time I talk with those idiots. All may not be lost though, I also have a WD MyCloud 3TB network drive and I'm hoping and praying that
most if not all of my files are on it. I sure wish I'd have waited till I got an answer here before I contacted the geeks. I don't know anything about powershell at all, but, lately I've been trying to learn some of the commands and what you can do with it,
and it seems like it would be very useful and I hope I can learn it. It seems very complicated right now and I don't understand it all, I even tried some commands I found on the forum to try to dislodge my drive from the storage space and pool and they did
not work. I typed the command word for word I don't know what I did wrong. I sure want to learn it though it would save me a lot of headaches. Thank you very much for the reply though I just wish I'f have waited to hear from someone on the forum before I contacted
the geeks. Thanks again! Turbo930.

What is the best HDD to expand Time Capsule Storage?

Hello,
I have a 2TB time capsule almost full. Last time I went to Apple store they told me that any HDD would work to increase my time capsule storage room. So, I bought a seagate backup plus drive and it didn't work. I tested with an old Western Digital that I have here. It worked ok but it's storage is small.
So, I'm thinking about a 4tb External HDD to plug into the time capsule and open space? Any suggestions?
Thank you very much

The folks at the Apple Store likely forgot to tell you that you must first format the hard drive in Mac OS Extended (Journaled). This would be true for any hard drive that you want to use with Time Machine.
Plug the hard drive into the USB port on your Mac, then follow the steps in this support document.
http://www.ehow.com/how_2063795_format-hard-drive-mac-os.html
Once the drive is formatted correctly, you can connect it to the USB port on the Time Capsule.
Please note though, that adding a hard drive to the Time Capsule will not increase the storage size of the Time Capsule. You will have two hard drives, so you must choose the one where you want to place data. It is not possible to merge the two drives and have them act as one.

Logical time in deleted time events - RPUAUD00

Dear All,
We are using standard report RPUAUD00 to read deleted time events (Infotype 2011) from system. In certain cases, deletion entries are displayed without any entry for field LTIME (Logical Time). Can any one throw some light, as of why and how this LTIME entry is not logged in change log?
Thank you.
Regards,
Kartik

Dear All,
We tried replicating this behaviour, but unable to. Any thoughts on this behaviour please..
Regards,
Kartik

To transfer time events from external time recording system to sap r/3

hi all,
I have a task to make an interface program between external time recording and sap r/3, and then to transfer the time events from that external system to sap system with the help of an rfc, i have got some information like the data first has to be transferred to the table CC1TEV and then from this table the data will be uploaded to 2011 infotype with the help of a standard program, but i am unable to find a solution for making the interface program and the RFC or BAPI which will transfer the records from external system.
if anybody has any information on this plz help me out to solve this problem.

Which recorgding terminals using to capture time events? They should have give some guidelines about this?
Regards
niranjan

HT1198 If I share an iPhoto library between multiple users, will the Faces, Events, and Places be automatically usable by all users, or will each user have to tag all the photos (e.g. if a user tags a face, will a different user have to do it in their own

If I share an iPhoto library between multiple users, will the Faces, Events, and Places be automatically usable by all users, or will each user have to tag all the photos (e.g. if a user tags a face, will a different user have to do it in their own iPhoto application??

Have you read this Apple document regarding sharing a library with multiple users: iPhoto: Sharing libraries among multiple users?
OT

Looping through inbox items on timer event is really slow...?

Hi,
I have an issue with a email sync event that I am running. Essentially, I am given a date (the received date of the last email synced) via another process and then need to return all the emails in the user's inbox the where receivedDate > this given
date.
I have a timer object than triggers my sync event every 15 mins. I also have a button that allows the user to manually activate the sync - this basically changes the timer to 3 secs and so it fires the sync event.
If the sync event is fired manually as per above, it loops through everything quite quickly (~12,000 emails in 30 secs) and I can stored the sender/recipient and received time data I require from these in a list of objects, which I sync later on in a background
process. During this loop the main UI freezes up, which is fine since I show a progress bar so the user knows how long they need to wait, and a large sync like this should only occur on their first sync theoretically. If the first sync event is
fired without the manual input - so still called from the same timer event, but just on the normal 15 min event, not the shortened 3 sec one - then it runs differently. The sync takes a lot lot longer, and the UI doesn't freeze up.
I presume this might be because it is fired slightly differently and does not hog up the main thread, but rather shares it with normal Outlook operations. Maybe the operations are being run on a background thread and then keep having to jump into the
main thread to access the email items...? Either way, I'm not quite sure how this is happening since the only difference is the user pressing a button that changes the timer.interval. The code that is run is the same, and the button press doesn't
trigger the actual sync itself.
Is there a way I can force this first sync to always run solely in the main thread, it can freeze up Outlook and show the progress bar until it is done? Ideally any subsequent syncs would then be run with no progress bar and no freezing up of the UI.
Many thanks,
Tom

Hello Tom,
> Maybe the operations are being run on a background thread and then keep having to jump into the main thread to access the email items...?
You shouldn't use another threads when dealing with the Outlook object model. Office applications use the single threaded apartment (STA) model and don't support multithreading. All calls made from another threads are marshalled by Outlook to the main
thread. However, you can use a low-level code (Extended MAPI) to access the data from secondary threads. For example, you can use Redemption which is based on Extended MAPI.
> it loops through everything quite quickly (~12,000 emails in 30 secs)
Instead of looping over all items in the folder I'd recommend using the
Find/FindNext
or
Restrict methods of the Items class. You can read more about them in the following articles:
How To: Use Find and FindNext methods to retrieve Outlook mail items from a folder (C#, VB.NET)
How To: Use Restrict method to retrieve Outlook mail items from a folder
You can use the System.Windows.Forms.Timer class which uses the main thread for invoking the Tick event. The .NET
Framework Class Library provides three different timer classes: System.Windows.Forms.Timer, System.Timers.Timer, and System.Threading.Timer. Each of these classes has been designed and optimized for use in different situations. The Comparing
the Timer Classes in the .NET Framework Class Library article examines the three timer classes and helps you gain an understanding of how and when each class should be used.
Also you may find the
AdvancedSearch method of the Application class helpful. Pay special attention to the fact that the search is performed in another thread. You don’t need to run another thread manually since the
AdvancedSearch method runs it automatically in the background. See
Advanced search in Outlook programmatically: C#, VB.NET for more information.

Timer Event Generator.

Hi there
I'm running WL Platform 8.1 SP4. I am using the timer event generator to fire requests to a channel/process. The timer is simply used to start a given process, there is no notion of message sent to it.
Issues
1) When defining a channel,
e.g
<channel name ="XToY" messageType="xml"
qualifiedMetadataType="eg:TimerEventGenerator" />
It seems I must define messageType="xml", if i define it as 'none' then it does not appear in the channel list when defining the timer event generator, therefore i cannot bind to it. So if I leave the messageType as xml, it appears. For the configuration of the timer, the message element is optional. Problem is when the timer now fires it throws the following error:
<08-May-2006 10:25:25 o'clock BST> <Error> <WLI-Core> <BEA-489030> <Error publishing Timer Event message for XToYTimerEG : com.bea.wli.mbconnector.MBConnMDBBase$MBConnectorException: Can't create proc
ess variable: com.bea.wli.mbconnector.MBConnMDBBase$MBConnectorException: Can't read XML (no root element)>
Any ideas?
2) Can someone direct me to any wlst scripts that allow the creation of a timer event generator in a cluster? ?I cannot find anything on dev2dev ?
TIA
Arvinder

Ok, you can basically leave the messageType as XML
and for the Timer EG configuration, for the optional message you can add <dummy/> this will fire the request and start a workflow or whatever is bound to the channel.

Cannot Deploy JPD with Timer Event Subscription in WLI 9.2 MP1 cluster

Has anyone had any luck deploying a JPD with a timer event subscription to a 9.2 MP1 WLI cluster? I am able to deploy Synchronous Client Request JPDs without any trouble but the ones that rely on internal WLI queues for invocation will not deploy in production. I am able to deploy the problematic JPDs to a non-clustered development environment without any issues but when I try to deploy the same artifact to a 9.2 MP1 cluster I see the following error:
Throwable: java.security.PrivilegedActionException: java.security.PrivilegedActionException: java.security.PrivilegedActionException: javax.management.InstanceNotFoundException: tosipDomain_phase2:Name=cgJMSServer,Type=JMSServer
Stack Trace:
java.security.PrivilegedActionException: java.security.PrivilegedActionException: java.security.PrivilegedActionException: javax.management.InstanceNotFoundException: tosipDomain_phase2:Name=cgJMSServer,Type=JMSServer
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:373)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
     at com.bea.wli.knex.runtime.core.bean.EJBGenerator.deployWorkshopQueues(EJBGenerator.java:178)
     at com.bea.wli.knex.runtime.core.dispatcher.DispResources.deployQueues(DispResources.java:727)
     at com.bea.wli.knex.runtime.core.dispatcher.DispCache.ensureDispUnit(DispCache.java:667)
     at com.bea.wli.knex.runtime.core.dispatcher.DispCache.ensureDispUnitForURI(DispCache.java:1025)
     at com.bea.wli.knex.runtime.core.dispatcher.DispCache.ensureDispUnitForURI(DispCache.java:946)
     at com.bea.wli.management.adminhelper.AdminHelperBean.getDispFile(AdminHelperBean.java:348)
     at com.bea.wli.management.adminhelper.AdminHelperBean.getProcessMetadata(AdminHelperBean.java:94)
     at com.bea.wli.management.adminhelper.AdminHelperSSB_wivmoo_EOImpl.getProcessMetadata(AdminHelperSSB_wivmoo_EOImpl.java:70)
     at com.bea.wli.management.adminhelper.AdminHelperSSB_wivmoo_EOImpl_WLSkel.invoke(Unknown Source)
     at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:548)
     at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:224)
     at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:438)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
     at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:434)
     at weblogic.rmi.internal.BasicServerRef.access$300(BasicServerRef.java:57)
     at weblogic.rmi.internal.BasicServerRef$BasicExecuteRequest.run(BasicServerRef.java:965)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
I am suprised about this error, b/c we are running out of a vanilla WLI domain created with the Configuration Wizard and the error message has to do with an internal JMS server that we have left with the default configuration. Has anyone else had success with this?
On a side note, I have to complain about the lack of 9.2 WLI documentation about deploying applications to production. The links on e-docs.bea.com actually redirect you to 8.5 documentation?!? I can't believe that this is the documentation we are left to use for 9.2 because there are so many changes between WLS 8 and 9.

Hey buddies,
I have a very similar error on WLI 9.2 MP2 on development mode with a cluster of managed servers on the same machine. I'm afraid that the automatic resource creation feature of dev mode is creating the error.
The ...processes.UnlockService is jpd called by a JMS Broker thru a channel, and I considering it as the first suspect point.
Any help is welcome.
LOG CONTENT:
<May 15, 2008 8:04:57 PM GMT-03:00> <Notice> <Stdout> <000000> <2008-05-15 20:04:57,575 [PERFO] localServer 10.10.10.10 xMDA [iid=15899 prd=TC DATA act=INSTALL otp=I onb=00011552111 cid=12345189 mrt=] END Designar_TCDATA OK>
<May 15, 2008 8:04:57 PM GMT-03:00> <Error> <WLI> <000000> <Exception processing com.oi.integra.provisioning.lockManager.processes.UnlockService
java.security.PrivilegedActionException: java.security.PrivilegedActionException: java.security.PrivilegedActionException: javax.management.InstanceNotFoundException: granite_wli_dev:Name=cgJMSServer,Type=JMSServer
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:373)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
     at com.bea.wli.knex.runtime.core.bean.EJBGenerator.deployWorkshopQueues(EJBGenerator.java:178)
     at com.bea.wli.knex.runtime.core.dispatcher.DispResources.deployQueues(DispResources.java:727)
     at com.bea.wli.knex.runtime.core.dispatcher.DispCache.ensureDispUnit(DispCache.java:671)
     Truncated. see log file for complete stacktrace
java.security.PrivilegedActionException: java.security.PrivilegedActionException: javax.management.InstanceNotFoundException: granite_wli_dev:Name=cgJMSServer,Type=JMSServer
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:373)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
     at com.bea.wli.knex.runtime.core.bean.EJBGenerator.ensureQueue(EJBGenerator.java:442)
     at com.bea.wli.knex.runtime.core.bean.EJBGenerator.ensureWorkshopQueues(EJBGenerator.java:412)
     at com.bea.wli.knex.runtime.core.bean.EJBGenerator$3.run(EJBGenerator.java:194)
     Truncated. see log file for complete stacktrace
java.security.PrivilegedActionException: javax.management.InstanceNotFoundException: granite_wli_dev:Name=cgJMSServer,Type=JMSServer
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:373)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
     at com.bea.wli.knex.runtime.core.bean.EJBGenerator.doesQueueExist(EJBGenerator.java:359)
     at com.bea.wli.knex.runtime.core.bean.EJBGenerator$6.run(EJBGenerator.java:449)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     Truncated. see log file for complete stacktrace
javax.management.InstanceNotFoundException: granite_wli_dev:Name=cgJMSServer,Type=JMSServer
     at weblogic.management.mbeanservers.compatibility.internal.MBeanHomeImpl.getProxy(MBeanHomeImpl.java:68)
     at weblogic.management.mbeanservers.compatibility.internal.MBeanHomeImpl.getMBean(MBeanHomeImpl.java:88)
     at weblogic.management.mbeanservers.compatibility.internal.MBeanHomeImpl.getAdminMBean(MBeanHomeImpl.java:265)
     at com.bea.wli.knex.runtime.core.bean.WLSUtil.getWorkshopJMSServer(WLSUtil.java:713)
     at com.bea.wli.knex.runtime.core.bean.EJBGenerator$5.run(EJBGenerator.java:372)
     Truncated. see log file for complete stacktrace
>
java.security.PrivilegedActionException: java.security.PrivilegedActionException: java.security.PrivilegedActionException: javax.management.InstanceNotFoundException: granite_wli_dev:Name=cgJMSServer,Type=JMSServer
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:373)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)

I just upgraded from Adobe Album 3.2 to Elements 11. My events and places are listed as keywords, b

I just upgraded from Adobe Album 3.2 to Elements 11. My events and places are listed as keywords, but not properly listed under the events an places category. Only people are correct . How do I fix?

For details, please refer to 'convert catalog of previous version' section of blog: http://help.adobe.com/en_US/elementsorganizer/using/WSae2ea3b149d0c3591ae939f103860b3d59-7 f59_WIN.html
~Andromeda

Report for time events

Hi Experts
i facing a problem which is i want a report for the time events which out time evaluation
how i can get this report please advice

Hi
this transaction is working in case a will run Time evaluation if am right or not please advice
really i facing a big problem
thank you for your cooperation
Edited by: Haseeb Nagieb on Aug 28, 2008 11:02 PM

Upload time events using PA61?

Hello friends,
I have written code to upload time events using BDC for transaction PA61.
But when i try to upload data,in the LIST ENTRY part there's a field ORIGF that is automatically getting filled with 'M" (indicating a manual entry).
The requirement is that i need to change the content of ORIGF to SPACE.
I tried updating table TEVEN but there's no change.
Can anybody please suggest me as to whet i must do.
Thanks in advance.
Sanghamitra.

Hello friends,
Yeah thats right.
Its always a good gesture to write down the way we solved.
I faced problem in two areas :
1) uploading more than three rows in the time events part of transaction PA61.
2) updating ORIGF field of TEVEN.
Solution:
1) have set the a counter while looping through the time events and also set field DEFSIZE of CTUEVENTS.
2) i observed the records getting uploaded in foreground mode so i could not notice the difference in the contenets of the field ORIGF but when i had done the same in background i could.
I hope the reason is understood.
Regards,
Sanghamitra.
2)

Time events storage place

Similar Messages

Maybe you are looking for