Time for an update... never fails

For as long as I can remember, Flash stops working properly when an update is available. I always know when to check it. Sure enough this time is no different other than there is no Mac PPC version. I can't access flash sites very well without it. I have things to do. Buying an Intel Mac in this economy is completely out of the question. Please fix this problem. Thanks.
PS - please also fix the warp speed it puts my fan into when it's not doing anything. It gets stuck there as well when I close out the browser. Harware acceleration is off.

Quinni24 wrote:
Please fix this problem. Thanks.
This is a user-to-user forum; we cannot "fix" things.
Regarding support for old systems: I am on Windows 2000 and found today that the latest Flash Player version does no longer support W2K. So I will need to remain on the old Flash Player version.
But this is merely a slight security risk, which I am willing to take. Software developers have better things to do than endlessly support old operating systems and browsers, so if we users decide to remain on old systems, we may as well use old software that is supported by these systems.
Besides, the main point of FP 10.2 is support for 64-bit systems, which both you and I don't have anyway...

Similar Messages

Time for another update please

I've tried sending this twice before. It doesn't appear in the forum and I get no NDR. I wonder what's up.
From: Firedog Date: 17 June 2009 09:49
To: [email protected] Subject: Re: Re: Time for another update please
> Jochem:
2. Progress on the proper headers in the email for threading.
Yes, please, as a high priority. Two more things to make life easier for email users:
Thank you
Noel

adobe-admin wrote on 2009-06-17 00:55:
I wish I had more to say! Lots of little things going on. Changing caches on images. Getting uploads out of the queue faster. Lots of discussions with Jive on making new enhancements. Gathering quotes and statements of work. Lining up resources. But all of these things have so many processes and go slowly.
I understand the process for new features takes a lot of time, both on
the Jive side and the Adobe side. But how about the bug fixes? There are
no statements of work there, no budget approvals, no slow moving
bureaucratic processes, that is just a matter of Jive writing code.
Specifically what I am interested in is:
1. Progress on the bouncing email. And if Jive is unable to solve that
anytime soon, whether they please can reduce the timeout on their mail
queue. After 2 days I can resend email, after 5 days the thread is dead
and buried. (That would be the "maximal_queue_lifetime" parameter in
main.cf on their email gateway.)
2. Progress on the proper headers in the email for threading.
I understand a lot of people are also anxious to see the updates Jive
released last week in Clearspace 2.5.13 put online, but since I try not
to use the web interface there is hardly anything interesting for me there.
Jochem
Jochem van Dieten
http://jochem.vandieten.net/

When I use update software from my mobile it take long time for checking update software and no thing happened to update my IOS software

When I use update software from my mobile it take long time for checking update software and no thing happened to update my IOS software

Servers have been swamped. Keep trying and be patient. Wait a few days.

Time for an update i th

WELL VISTA HAS BEEN CONSUMER RELEASE GETTING ON FOR A FORTNIGHT NOW SO TO CAT AND DALE
please can we have an updated eta considering we the users blessed the march eta as a worst case scenario , in that we wouldnt think that CL would let its customers(financers) down that much... could they?

CL's new name is Cash-N-Run. No support whatsoever. Expensi've sound card is worthless without driver support. Cash-N-Run doesn't seem to care! My customers are bitching about these worthless but expensi've sound cards. Cash-N-Run is costing me & I'm pissed about it. Cash-N-Run says no Vista support. This company li'ves in the past. Not good in the computer world. Days are like years in the world of tech. I can remember XP driver updates being slow from this company also. I think it's time to dump Cash-n-Run!

Table location of schedule times for SW updates deployment

Does anyone know what SQL table or view contains the schedule times one sets when creating a software update deployment? SCCM 2007.
Thanks!

This information can be found within the CM07 SQL Schema docs.
http://technet.microsoft.com/en-ca/library/dd334611.aspx
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Dashboard Web Clip Widgets - "Time for an Update"

I have an issue with a dashboard widget that I created from the Safari button "Open in Dashboard" to create.
I used the widget on the following page:
http://www.calottery.com/win/winning-numbers
The problem is, the widget displays a giant overlay:
Needless to say, it makes this particular web clipping completely unusable...

I would like to do this as well.
I monitor an internal web site that displays network traffic and it would be very convenient to do this as a web clip on the desktop.
Can someone tell us where the details for the Dashboard web clip are kept? Perhaps there are some additional properties that can be added to it from the back end that would get it to work. (A port number, 'https', credentials, etc.) It would almost be silly if it couldn't be done!
-Travis
Message was edited by: Travis B

Default maximum run time for updates

Is there a way to change the default "Max run time" for each update? In SCCM 2007 the default run time was 20 minutes per update, now it is 5 minutes. I have machines that repeatedly fail to install updates because the max time of 300 seconds was
reached.

Hi,
What is the powershell command to change the maximum run time?
Thanks.
probably this:
http://technet.microsoft.com/en-us/library/jj850138(v=sc.20).aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

SCCM 2012 R2 changing date and time for patching software update groups

I recieve this error when changing date and time for software update group. worked fine yesterday before patches to the server were applied last night. we removed patches but still get error below. Any help would be great.
ConfigMgr Error Object:
instance of SMS_ExtendedStatus
Description = "Property array AssignedCIs exceeded the max allowed";
ErrorCode = 1078462259;
File = "e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\\sspupdatesassignment.cpp";
Line = 94;
Operation = "PutInstance";
ParameterInfo = "";
ProviderName = "ExtnProv";
StatusCode = 2147749889;
Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryException
The SMS Provider reported an error.
Stack Trace:
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObject.Put(ReportProgress progressReport)
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObject.Put()
at Microsoft.ConfigurationManagement.AdminConsole.SmsDialogData.Put(IResultObject resultObject, List`1 resultObjectsPut, Boolean retainLock)
at Microsoft.ConfigurationManagement.AdminConsole.SmsDialogData.Put(Boolean retainLock)
at Microsoft.ConfigurationManagement.AdminConsole.DialogFramework.Forms.SmsPropertySheet.Put(ActionTrigger trigger)
System.Management.ManagementException
Generic failure
Stack Trace:
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObject.Put(ReportProgress progressReport)
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObject.Put()
at Microsoft.ConfigurationManagement.AdminConsole.SmsDialogData.Put(IResultObject resultObject, List`1 resultObjectsPut, Boolean retainLock)
at Microsoft.ConfigurationManagement.AdminConsole.SmsDialogData.Put(Boolean retainLock)
at Microsoft.ConfigurationManagement.AdminConsole.DialogFramework.Forms.SmsPropertySheet.Put(ActionTrigger trigger

no it is the final version... is working today after cleaning up database... is working now...thanks
Hello Robert,
would you please give some more informations, as I have the same issue and don't get what you mean bye "cleaning up databases".
Regards ooGDoo
ooGDoo

I have been charged several times for items I have not ordered or received...Paradise Cove App

I have been charged several times for items I have not ordered or received...Paradise Cove App.
On a few dates I have attempted to purchase items on Paradise cove...then been billed several times for items I never received.
please remove these charges.
Tony Starace

Select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History on your computer.

Update trigger fails with value too large for column error on timestamp

Hello there,
I've got a problem with several update triggers. I've several triggers monitoring a set of tables.
Upon each update the updated data is compared with the current values in the table columns.
If different values are detected the update timestamp is set with the current_timestamp. That
way we have a timestamp that reflects real changes in relevant data. I attached an example for
that kind of trigger below. The triggers on each monitored table only differ in the columns that
are compared.
CREATE OR REPLACE TRIGGER T_ava01_obj_cont
BEFORE UPDATE on ava01_obj_cont
FOR EACH ROW
DECLARE
v_changed boolean := false;
BEGIN
IF NOT v_changed THEN
    v_changed := (:old.cr_adv_id IS NULL AND :new.cr_adv_id IS NOT NULL) OR
                 (:old.cr_adv_id IS NOT NULL AND :new.cr_adv_id IS NULL)OR
                 (:old.cr_adv_id IS NOT NULL AND :new.cr_adv_id IS NOT NULL AND :old.cr_adv_id != :new.cr_adv_id);
END IF;
IF NOT v_changed THEN
    v_changed := (:old.is_euzins_relevant IS NULL AND :new.is_euzins_relevant IS NOT NULL) OR
                 (:old.is_euzins_relevant IS NOT NULL AND :new.is_euzins_relevant IS NULL)OR
                 (:old.is_euzins_relevant IS NOT NULL AND :new.is_euzins_relevant IS NOT NULL AND :old.is_euzins_relevant != :new.is_euzins_relevant);
END IF;
[.. more values being compared ..]
    IF v_changed THEN
    :new.update_ts := current_timestamp;
END IF;
END T_ava01_obj_cont;Really relevant is the statement
:new.update_ts := current_timestamp;So far so good. The problem is, it works the most of time. Only sometimes it fails with the following error:
SQL state [72000]; error code [12899]; ORA-12899: value too large for column "LGT_CLASS_AVALOQ"."AVA01_OBJ_CONT"."UPDATE_TS"
(actual: 28, maximum: 11)
I can't see how the value systimestamp or current_timestamp (I tried both) should be too large for
a column defined as TIMESTAMP(6). We've got tables where more updates occur then elsewhere.
Thats where the most of the errors pop up. Other tables with fewer updates show errors only
sporadicly or even never. I can't see a kind of error pattern. It's like that every 10.000th update
or less failes.
I was desperate enough to try some language dependend transformation like
IF v_changed THEN
    l_update_date := systimestamp || '';
    select value into l_timestamp_format from nls_database_parameters where parameter = 'NLS_TIMESTAMP_TZ_FORMAT';
    :new.update_ts := to_timestamp_tz(l_update_date, l_timestamp_format);
END IF;to be sure the format is right. It didn't change a thing.
We are using Oracle Version 10.2.0.4.0 Production.
Did anyone encounter that kind of behaviour and solve it? I'm now pretty certain that it has to
be an oracle bug. What is the forum's opinion on that? Would you suggest to file a bug report?
Thanks in advance for your help.
Kind regards
Jan

Could you please edit your post and use formatting and tags. This is pretty much unreadable and the forum boogered up some of your code.
Instructions are here: http://forums.oracle.com/forums/help.jspa

I've tried to update my i-Tunes version after the site suggested I should following my i-Pad being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several

I’ve tried to update my i-Tunes version after the site suggested I should following my i-Pad Air being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several times. I then tried wiping the original software from the computer and re-downloading from scratch. Each time I tried the download failed with a message saying “Service “Apple Mobile Device” failed to start. Verify that you have sufficient privileges to start system services” At this stage, the only way forward was to “abort” the download. This I have done now four times and the same thing happens. When I did finally manage to get an i-Tunes shortcut on my desktop, the program wouldn’t open saying: “i-Tunes was not installed correctly. Please re-install i-Tunes. Error 7 (Windows error 193)” Any ideas to resolve this?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

I am using Windows 7 Home Premium 64-bit OS. I've never had this problem before... today I opened iTunes and it prompted me to download the newest version. I use iTunes all the time and have updated it multiple times with no issues. During the installa

I am using Windows 7 Home Premium 64-bit OS.I've never had this problem before... today I opened iTunes and it prompted me to download the newest version. I use iTunes all the time and have updated it multiple times with no issues. During the installation process it gave me an error message that said:
Runtime error!
Program C:\Program Files\iTunes.exe
R0634
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.
I quit the installation, uninstalled iTunes and rebooted my computer. I now receive a similar message with a slight difference:
Runtime error!
Program C:\Program Files (x86)...
R0634
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.
I did not leave anything out from the error message. It doesn't point to a specific file, it just ends with "(x86)..." Every time I boot up my computer, this error message pops up on my desktop.
How do I repair this issue? I have found multiple suggested solutions but am unsure which one is the best, and I don't want to try a bunch of different things for fear I may make the problem worse. I would like to try and fix this myself if possible but I need to know if that is really possible or if I need to take my computer to someone for repairs. Any suggestions will be greatly appreciated!!

Hi lustyln,
I'm having a little trouble understanding all of what you are trying to explain. From what I can tell, it sounds like your PC has a lot of software problems and you want to know what is supposed to be there and what isn't.
For reference, here are your product specifications:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01893242&lc=en&product=4043282
To get your PC software back to how it was when it was first purchased, run a system recovery:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01867418&lc=en&product=4043282
I hope this helps.
...an HP employee just trying to help where I can, but not speaking on behalf of HP.

Trying to copy ANY file from my MacBook Pro to an external hard drive spins for 45 minutes then fails. I hate this computer and WISH I never would have wasted my money. Any ideas? WD My Passport 2TB Drive, had to buy a program to make the POS write

Trying to copy ANY file from my MacBook Pro to an external hard drive spins for 45 minutes then fails. I hate this computer and WISH I never would have wasted my money. Any ideas? WD My Passport 2TB Drive, had to buy a program to make the POS read files. Copies that would take seconds from a Windows based machine never complete. I have to close the transfer or shut off the machine half the time. Worst computer I have EVER owned, crashes non-stop, constantly freezes, and seems like EVERY operation is more complicated with this thing. Literally, my 1997 Compaq was FAR MORE reliable and user friendly.

This is one of the messages I keep getting; The Finder can’t complete the operation because some data in -- File Whatever -- can’t be read or written.(Error code -36)
I have copied things to the hard drive in the past, but it has always been incredibly slow, and now just seems to freeze and fail

Bought a new iMac 27" yesterday. Attempting to download Adobe Creative Suite 5 Design Premium. Loaded software from discs. When I check for updates they fail to install. A window comes up saying "Some updates failed to install." Then under each applicati

I bought a new iMac 27" yesterday, running with Mavericks OS. Attempting to download Adobe Creative Suite 5 Design Premium. Loaded software from discs. When I check for updates they fail to install. A window comes up saying "Some updates failed to install." Then under each applications it says "There was an error downloading this update. Please quit and try again later." Have done this several times. Suggestions?

update manually,: http://www.adobe.com/downloads/updates/

TS5376 Trying to update iTunes to 11.1.4 for Windows has still failed after following detailed directions

I followed the directions provided by Apple personnel to help resolve this issue: http://support.apple.com/kb/TS5376.
The resulting errors include;
Runtime Error! Program C:\Program Files (x86)\iTunes\iTunes.exe
R6034
An application has made an attempt to load the C runtime library incorrectly. Please contact the applciations's support team for more informaiton.
That was followed by: the iTunes warning:
Service 'Apple Mobile Device' (Apple Mobile Device) Failed to start. Verify that you have sufficient privileges to start system services.
That was followed by the Runtime Error message two more times.
Followed by iTunes was not installed correcdtly. Please reinstall iTunes. Error 7 (Windows error 1114).
NOTE: before this load attempt I
Made sure I had Administrator rights
Fully removed iTunes
Manually removed any lingering iTunes files as per the instructions
Right mouse clicked on the downloaded exe to make sure I was Administrator.
Nothing seems to work. It was FINE until this new "upgrade". Any suggestions

See Troubleshooting issues with iTunes for Windows updates.
tt2

Time for an update... never fails

Similar Messages

Maybe you are looking for