Time for Discoloration?
My MacBook is squarely within the time frame that was set out for the discoloration issues and I didn't really notice much of a problem until a week or so ago. I bought the laptop back in June, but it wasn't getting regular use until the beginning of September, maybe why I'm noticing the problem now and not three or four weeks ago. Anyway, my issue is that I'm not sure whether Apple will do anything about it because I'm out of that magic 90 day period, and I don't want to be charged the money for asking. Has anyone had the pieces replaced out of that 90 day period?
Second, I was back at home when I bought the computer, but I'm now away at school. Do any repairs have to be done in the same province as the purchase?
Third, it's getting near the end of a semester, and I really can't afford to be without my computer until the semester is over. If it can be fixed and has to be sent away for fixing, is that on Apple's schedule or can it wait until a time when I can afford not to have my computer (like Christmas break or the first few weeks of the new semester)?
Thanks in advance!
I had my case replaced after the initial 90-day period. But the 90 days only refers to the time you have to call Apple for free if you don't have AppleCare. Your warranty still goes for a whole year.
The first place I asked about getting the case replaced told me they would have to send it away for 2 weeks. I asked them the same question you did - can I wait and do it over the Christmas break - and they told me that was no problem. In the end, though, I found a place that was willing to order the case in advance and then install it in one afternoon while I waited, and that was what I did.
And, finally, I bought the macbook in Austin, TX, and had it repaired in Vienna, Austria, so you see that geography has no bearing on repairs!
Similar Messages
-
Do I need to keep my external hard drive connected at all times for time capsule?
Do I need to keep my external hard drive connected at all times for time capsule?
Hi,
I have a similar question. I have backed up my external hard drive through my computer, onto my TC. When I go into TM, it doesn't show the external hard drive unless it is connected to the computer. Can I access the info from the external hard drive that is on the TC if I don't have the hard drive plugged in? If so, how can I do that?
Thanks,
Bernadette -
How to get users' login logout time for user IDs for a specific date?
Dear All,
There is a case I being requested to retrieve the Userid, User Name,
User Group, User Dept, Date, Login Time, Logout Time in a specific date, for example, 21.05.2009.
How should I retrieve the information? The user want to input specific date and user group then return the details that mentioned above.
I try with SUIM->Users->By Logon Date and Password Change... but I can't specific the date that I want ...
I try with SM19 (Security Audit Log), but unfortunately in my system this is not activated.
I've seek for SAP's advise, and they say need to ask abaper to developr a report in order to get such details....
Do you guys have any other methods?
Do you guys know which tables will contain the details as mentioned above?
Best Regards,
KenUnfortunately without the audit log, you're going have a hard time finding this information. As mentioned, ST03N will give you some information. If your systems daily workload aggregation goes back to the date you require then you'll be able to get a list of all users who logged on that day. ST03N doesn't keep time stamps just response times.
My only idea is VERY labor intensive. If your DB admin can retrieve a save of the database from that day then table USR02 will hold a little more information for you. It will contain last login times for that day. If your system backup policy happened to have saved the contents of folder "/usr/sap/<SID>/<instance>/data" then you potentially have access to all the data you require. The stat file will have recorded every transaction that took place during that day. If that file is restored you could use program RSSTAT20 to query against it.
Good luck and turn on the audit log as it makes your life much easier! -
I updated my iphone and when it came time for activation it won't work and keeps telling me to try again. At the top it says "No Service" and I have my SIM card in and a good WiFi connection and have connected it through iTunes but it says I have no SIM card and need to disconnect and insert my SIM. I don't understand why this keeps happening and it's been going on for a wile now. I have tried over and over again to get this iPhone to work but nothig is happening. I've even gone on the website for support (apple.com/support) but cannot find anything that will help me with this situation. Can someone please help me find a solution to this problem? I have been without a phone and do not have money to buy another one and it is crucial for me to get it fixed. Thanks.
wesb
What computer operating system is involved in the Premiere Elements 11 and 13 issues? Same computer or different ones? Are you installing from purchased download installation files or from purchased installation disc? Does Premiere Elements 11 work completely on this computer whereas 13 will not?
Let us go through the typical drill so as to take nothing for granted.
1. Does the problem exist with or without the antivirus and firewall(s) disabled? Are you working with an individual home computer or in a
school or company network?
2. Are you running the program as Administrator and is there any "domain" account involved?
3. Is your video card/graphics card up to date according to the web site of the manufacturer of the card?
4. Do you have the latest version of QuickTime installed on the computer with Premiere Elements?
Let us start by ruling in or out any of the above, and then we can decide what next.
Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR -
Generic extractor FM : taking 5-6 hours time for 3 months to BW urgent:
Dear experts,
I have designed a FM for generic extraction , which is taking 5-6 hoours time for 3 months data i.e 24 lakhs records to BW up to PSA .
i have given the coding below plz provide any modifications to improve the performance.....
FUNCTION zhr_att_analysis.
""Local Interface:
*" IMPORTING
*" VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*" VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*" VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*" VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*" VALUE(I_REMOTE_CALL) TYPE SBIWA_FLAG DEFAULT SBIWA_C_FLAG_OFF
*" TABLES
*" I_T_SELECT TYPE SBIWA_T_SELECT OPTIONAL
*" I_T_FIELDS TYPE SBIWA_T_FIELDS OPTIONAL
*" E_T_DATA STRUCTURE ZHR_ATT_MAIN OPTIONAL
*" EXCEPTIONS
*" NO_MORE_DATA
*" ERROR_PASSED_TO_MESS_HANDLER
Auxiliary Selection criteria structure
DATA: l_s_select TYPE sbiwa_s_select.
Maximum number of lines for DB table
STATICS: l_maxsize TYPE sbiwa_s_interface-maxsize.
Select ranges
RANGES: l_r_pernr FOR pa9004-pernr,
l_r_bukrs FOR pa0001-bukrs,
l_r_persg FOR pa0001-persg,
l_r_begda FOR pa9004-begda,
l_r_persk FOR pa0001-persk.
Maximum number of lines for DB table
STATICS: s_s_if TYPE srsc_s_if_simple,
counter
s_counter_datapakid LIKE sy-tabix,
cursor
s_cursor TYPE cursor.
*"Declaration of store data
TYPES : BEGIN OF ty_9004,
pernr TYPE persno,
endda TYPE endda,
begda TYPE begda,
zrs TYPE zrs,
zstorecode TYPE zstorecode,
END OF ty_9004.
*"Declaration of employee data
TYPES : BEGIN OF ty_0001,
pernr TYPE pernr_d,
endda TYPE endda,
begda TYPE begda,
AEDTM TYPE AEDAT,
bukrs TYPE bukrs,
persg TYPE persg,
persk TYPE persk,
END OF ty_0001.
*"Declaration of expected mandays
TYPES : BEGIN OF ty_0000,
pernr TYPE persno,
endda TYPE endda,
begda TYPE begda,
aedtm TYPE aedat,
stat2 TYPE stat2,
massn TYPE massn,
END OF ty_0000.
*"Declaration of man days swiped
TYPES : BEGIN OF ty_teven,
pernr TYPE pernr_d,
ldate TYPE ldate,
satza TYPE retyp,
aedtm TYPE aedat,
counter_swiped TYPE i,
END OF ty_teven.
*"Declaration of Man days regularized
TYPES : BEGIN OF ty_2002,
pernr TYPE pernr_d,
subty TYPE subty,
endda TYPE endda,
begda TYPE begda,
aedtm TYPE aedat,
END OF ty_2002.
*"Declaration of Man days lostdue to leave
TYPES : BEGIN OF ty_2001,
pernr TYPE pernr_d,
subty TYPE subty,
endda TYPE endda,
begda TYPE begda,
aedtm TYPE aedat,
END OF ty_2001.
*****Declaration of weekly off
TYPES : BEGIN OF ty_2003,
pernr TYPE pernr_d,
subty TYPE subty,
endda TYPE endda,
begda TYPE begda,
aedtm TYPE aedat,
tprog TYPE tprog,
END OF ty_2003.
Auxiliary Selection criteria structure
DATA :
it_0001 TYPE TABLE OF ty_0001,
wa_0001 TYPE ty_0001,
it_0000 TYPE TABLE OF ty_0000,
wa_0000 TYPE ty_0000,
it_teven TYPE TABLE OF ty_teven,
wa_teven TYPE ty_teven,
it_2002 TYPE TABLE OF ty_2002 ,
wa_2002 TYPE ty_2002,
it_2001 TYPE TABLE OF ty_2001,
wa_2001 TYPE ty_2001,
it_2003 TYPE TABLE OF ty_2003,
wa_2003 TYPE ty_2003,
wa_target TYPE zhr_att_main.
DATA : date TYPE dats,
doj TYPE dats,
dol TYPE dats,
date1 TYPE dats,
date2 TYPE dats,
counter(9) TYPE n.
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
IF i_initflag = sbiwa_c_flag_on.
Initialization: check input parameters
buffer input parameters
prepare data selection
Check DataSource validity
CASE i_dsource.
WHEN 'ZHR_ATT_ANALYSIS'.
WHEN OTHERS.
IF 1 = 2. MESSAGE e009(r3). ENDIF.
log_write 'E' "message type
'R3' "message class
'009' "message number
i_dsource "message variable 1
' '. "message variable 2
RAISE error_passed_to_mess_handler.
ENDCASE.
APPEND LINES OF i_t_select TO s_s_if-t_select.
Fill parameter buffer for data extraction calls
s_s_if-requnr = i_requnr.
s_s_if-dsource = i_dsource.
s_s_if-maxsize = i_maxsize.
Fill field list table for an optimized select statement
(in case that there is no 1:1 relation between InfoSource fields
and database table fields this may be far from beeing trivial)
APPEND LINES OF i_t_fields TO s_s_if-t_fields.
ELSE. "Initialization mode or data extraction ?
Data transfer: First Call OPEN CURSOR + FETCH
Following Calls FETCH only
First data package -> OPEN CURSOR
IF s_counter_datapakid = 0.
LOOP AT s_s_if-t_select INTO l_s_select WHERE fieldnm = 'PERNR'.
MOVE-CORRESPONDING l_s_select TO l_r_pernr.
APPEND l_r_pernr.
ENDLOOP.
LOOP AT s_s_if-t_select INTO l_s_select WHERE fieldnm = 'BUKRS'.
MOVE-CORRESPONDING l_s_select TO l_r_bukrs.
APPEND l_r_bukrs.
ENDLOOP.
LOOP AT s_s_if-t_select INTO l_s_select WHERE fieldnm = 'PERSG'.
MOVE-CORRESPONDING l_s_select TO l_r_persg.
APPEND l_r_persg.
ENDLOOP.
LOOP AT s_s_if-t_select INTO l_s_select WHERE fieldnm = 'BEGDA'.
MOVE-CORRESPONDING l_s_select TO l_r_begda.
APPEND l_r_begda.
ENDLOOP.
LOOP AT s_s_if-t_select INTO l_s_select WHERE fieldnm = 'PERSK'.
MOVE-CORRESPONDING l_s_select TO l_r_persk.
APPEND l_r_persk.
ENDLOOP.
OPEN CURSOR WITH HOLD s_cursor FOR
populate only store code employess does not have empty store codes
SELECT apernr bpernr bendda bbegda bbukrs bpersg b~persk FROM pa9004 AS a INNER JOIN pa0001 AS b
ON apernr = bpernr
WHERE a~pernr IN l_r_pernr AND
a~zstorecode <> '' AND
bukrs IN l_r_bukrs AND
persg IN l_r_persg AND
persk IN l_r_persk.
ENDIF.
Fetch records into interface table.
named E_T_'Name of extract structure'.
FETCH NEXT CURSOR s_cursor
APPENDING CORRESPONDING FIELDS
OF TABLE it_0001
PACKAGE SIZE s_s_if-maxsize.
IF sy-subrc <> 0.
CLOSE CURSOR s_cursor.
RAISE no_more_data.
ELSE.
break-point.
IF l_r_begda-high = '00000000' AND l_r_begda-low = '00000000'.
date1 = sy-datum - 1.
date2 = sy-datum - 1.
ELSE.
date1 = l_r_begda-low .
date2 = l_r_begda-high.
ENDIF.
SORT it_0001 BY pernr persg begda endda bukrs.
DELETE it_0001 WHERE persg NE 'T' AND
persg NE 'K' AND
persg NE 'P' AND
persg NE 'W'.
DELETE ADJACENT DUPLICATES FROM it_0001 COMPARING pernr begda endda bukrs.
populate all the employees that are active in pa9004.
IF NOT it_0001[] IS INITIAL.
SELECT pernr endda begda aedtm massn FROM pa0000
INTO CORRESPONDING FIELDS OF TABLE it_0000
FOR ALL ENTRIES IN it_0001
WHERE pernr = it_0001-pernr
AND ( massn = 'A1' OR massn = '00' OR massn = 'A6' OR massn = 'A3' ).
SORT it_0000 BY pernr begda DESCENDING.
ENDIF.
populate SWIPED MAN DAYS data
IF NOT it_0001[] IS INITIAL.
SELECT pernr ldate satza aedtm FROM teven
INTO CORRESPONDING FIELDS OF TABLE it_teven
FOR ALL ENTRIES IN it_0001
WHERE pernr = it_0001-pernr AND
satza = 'P01'
AND ldate IN l_r_begda.
SORT it_teven BY pernr ldate.
ENDIF.
**populate REGULARIZATION DAYS data
IF NOT it_0001[] IS INITIAL.
SELECT pernr subty endda begda aedtm FROM pa2002
INTO CORRESPONDING FIELDS OF TABLE it_2002
FOR ALL ENTRIES IN it_0001
WHERE pernr = it_0001-pernr
AND begda >= date1
AND endda <= date2 .
SORT it_2002 BY pernr begda endda.
ENDIF.
**populate LEAVE DAYS data
IF NOT it_0001[] IS INITIAL.
SELECT pernr subty endda begda aedtm FROM pa2001
INTO CORRESPONDING FIELDS OF TABLE it_2001
FOR ALL ENTRIES IN it_0001
WHERE pernr = it_0001-pernr
AND begda >= date1
AND endda <= date2 .
SORT it_2001 BY pernr begda endda .
ENDIF.
**populate WEEKLY OFF data
IF NOT it_0001[] IS INITIAL.
SELECT pernr subty endda begda aedtm tprog FROM pa2003
INTO CORRESPONDING FIELDS OF TABLE it_2003
FOR ALL ENTRIES IN it_0001
WHERE pernr = it_0001-pernr AND
tprog = 'OFF'
AND begda >= date1
AND endda <= date2 .
SORT it_2003 BY pernr begda endda.
ENDIF.
date = sy-datum.
********added changes on 06.04.2008**************action type & date dependent extaction****
loop over it_0001 table
BREAK-POINT.
LOOP AT it_0001 INTO wa_0001.
if sy-tabix = 1.
counter = 0.
for expected mandays
LOOP AT it_0000 INTO wa_0000 WHERE pernr = wa_0001-pernr .
IF wa_0000-massn = 'A1' OR wa_0000-massn = '00' OR wa_0000-massn = 'A3'.
doj = wa_0000-begda.
if wa_0000-endda = '99991231'.
date2 = sy-datum.
else.
dol = date2.
endif.
ELSEIF wa_0000-massn = 'A6'.
dol = wa_0000-begda.
ENDIF.
ENDLOOP.
IF date1 <= wa_0001-begda AND date2 <= wa_0001-endda AND date2 >= wa_0001-begda AND date1 <= wa_0001-endda.
counter = date2 - wa_0001-begda .
counter = counter + 1.
date = wa_0001-begda - 1.
ELSEIF date1 >= wa_0001-begda AND date2 >= wa_0001-endda AND date2 >= wa_0001-begda AND date1 <= wa_0001-endda.
counter = wa_0001-endda - date1.
counter = counter + 1.
date = date1 - 1.
ELSEIF date1 >= wa_0001-begda AND date2 <= wa_0001-endda AND date2 >= wa_0001-begda AND date1 <= wa_0001-endda.
counter = date2 - date1.
counter = counter + 1.
date = date1 - 1.
ELSEIF date1 <= wa_0001-begda AND date2 >= wa_0001-endda AND date2 >= wa_0001-begda AND date1 <= wa_0001-endda.
counter = wa_0001-endda - wa_0001-begda.
counter = counter + 1.
date = wa_0001-begda - 1.
ELSE.
CONTINUE.
ENDIF.
********completed changes on 06.04.2008**************action type & date dependent extaction**
split records from date of joining to till date
DO counter TIMES.
CLEAR : wa_teven , wa_target.
date = date + 1.
wa_target-date1 = date.
wa_target-pernr = wa_0001-pernr.
wa_target-bukrs = wa_0001-bukrs.
wa_target-persg = wa_0001-persg.
wa_target-persk = wa_0001-persk.
for expected mandays count
IF wa_target-date1 >= doj AND wa_target-date1 <= dol.
wa_target-expectedmandays = 1.
wa_target-aedtm = wa_0000-aedtm.
for swiped mandays
READ TABLE it_teven INTO wa_teven WITH KEY pernr = wa_target-pernr
ldate = wa_target-date1 BINARY SEARCH.
IF sy-subrc = 0.
wa_target-swiped_days = 1.
wa_target-aedtm = wa_teven-aedtm.
ENDIF.
for regularized days
LOOP AT it_2002 INTO wa_2002 WHERE pernr = wa_target-pernr
AND ( endda GE wa_target-date1 AND begda LE wa_target-date1 ).
wa_target-reg_days = 1.
wa_target-subty2 = wa_2002-subty.
wa_target-aedtm = wa_2002-aedtm.
ENDLOOP.
for leave days
LOOP AT it_2001 INTO wa_2001 WHERE pernr = wa_target-pernr
AND ( endda GE wa_target-date1 AND begda LE wa_target-date1 ).
wa_target-leave_days = 1.
wa_target-subty1 = wa_2001-subty.
wa_target-aedtm = wa_2001-aedtm.
ENDLOOP.
for weekly off days
LOOP AT it_2003 INTO wa_2003 WHERE pernr = wa_target-pernr
AND ( endda GE wa_target-date1 AND begda LE wa_target-date1 ).
wa_target-off_days = 1.
wa_target-aedtm = wa_2003-aedtm.
ENDLOOP.
append work area to e_t_data
APPEND wa_target TO e_t_data.
ENDIF.
ENDDO.
ENDLOOP.
clear internal tables
CLEAR : it_0000 , it_0001 , it_2001 , it_2002 , it_2003 , it_teven.
ENDIF.
s_counter_datapakid = s_counter_datapakid + 1.
ENDIF. "Initialization mode or data extraction ?
ENDFUNCTION.Hi Guys
I can have both your cases looked into for you.
Please send me an email using the contact us form in my profile. The address for this form in the section 'about me'.
Thanks
Stuart
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-) -
Longer time for Material Availability check while creation of prd order.
Hi guys,
I am facing a weird problem while creating production orders thru CO01.
I enter the component and plant and I am also using the forward scheduling option.
for some reason, SAP is taking a long time for material availability check when I hit the release button.
Sometimes its taking more than an hour. Its happening with few specific BOM's, and I have checked the master data but I could hardly find a problem in master data.
Can someone suggest me some tips ??
Thanks & Regards,
SashivardhanHi,
Please check the Availability check control maintained for Components it should be 01 or 02. Also check the issue storage location maintained or not. You can maintain issue storage location in BOM in Status/lng text tab in Production Storage Location.
Hope this will help.
Regards,
Navin -
Set frame delay time for animated gif using ImageIO
I'm trying to change the delay time of each frame for an animated gif by changing the metadata for each frame as following but it doesn't change anything.
static private IIOMetadata setMetadata(IIOMetadata metadata, int delayMS) throws IOException
Node root = metadata.getAsTree("javax_imageio_gif_image_1.0");
for (Node c = root.getFirstChild(); c != null; c = c.getNextSibling())
String name = c.getNodeName();
if (c instanceof IIOMetadataNode)
IIOMetadataNode metaNode = (IIOMetadataNode) c;
if ("GraphicControlExtension".equals(name))
metaNode.setAttribute("delayTime", Integer.toString(delayMS));
}Does anyone know how to set delay time for animated gif using ImageIO ?I'm trying to change the delay time of each frame for an animated gif by changing the metadata for each frame as following but it doesn't change anything.
static private IIOMetadata setMetadata(IIOMetadata metadata, int delayMS) throws IOException
Node root = metadata.getAsTree("javax_imageio_gif_image_1.0");
for (Node c = root.getFirstChild(); c != null; c = c.getNextSibling())
String name = c.getNodeName();
if (c instanceof IIOMetadataNode)
IIOMetadataNode metaNode = (IIOMetadataNode) c;
if ("GraphicControlExtension".equals(name))
metaNode.setAttribute("delayTime", Integer.toString(delayMS));
}Does anyone know how to set delay time for animated gif using ImageIO ? -
Taking too long time for booting
Hi there,
I just bought myself an iphone 5s. . Try to get up started for the 1st time but the thing keep booting or loading too long time for endless hours. What may go wrong? Appreciate if you could help me on this.But payment run before due date. you are not run before due date once check it
-
How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro. What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
NOTE: If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did. He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse.
THIS IS WHAT YOU WILL NEED TO DO:
First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up. If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it. Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
I have a Linksys WRT320N I used for the initial Charter setup.
I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
Hasn't caused any issues so far but one thing I did notice.
On the Linksys there were 3 DNS servers listed.
The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
I tried everything above, but light on modem still flashes yellow.
I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO. -
Background job is taking lot of time for processing the job.
One background job - which is processing Idocs is processing a job for more than 2000+ seconds.. and completed tho.
But this is happening for the past few days.. is there any way to trouble shoot, or find from any logs of this completed job, to find out why it was taking lot of time for processing.
Can you please tell me the steps of analyzing / trouble shooting why it was taking lot of time daily.
Regards,
Satish.Hi Satish,
Run DB stat from db13 it will improve the performance.
Check number of idocs. You can send part by part, instead of sending huge data.
Check SM58 logs
Suman -
How to schedule a job occurring time for 1 1/2 hour in sql server
how to schedule a job occurring time for 1 1/2 hour in sql server
Hi,
This is a known issue in the previous SQL Server version and has been fixed in SQL Server 2012. You should be able to set 90 minutes and the change would be saved in SQL Server 2012.
http://connect.microsoft.com/SQLServer/feedback/details/346786/ssms-does-not-support-job-schedule-frequencies-greater-than-60-minutes
Currently, you may schedule the job to occur every 1 hour or you may refer to the suggestion by Latheesh to get around this.
Thank you for your understanding.
Tracy Cai
TechNet Community Support -
Design Time for Processes and Forms
Hi experts,
When trying to open "Design Time for Processes and Forms" in order to create a process, I get a dump.
Could you let me know what could be wrong ? config? etc..
Hereunder is a sample of what I found in T.code ST22
The following checkpoint group was used: "No checkpoint group specified"
If in the ASSERT statement the addition FIELDS was used, you can find
the content of the first 8 specified fields in the following overview:
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
referenced node must exist
READ TABLE object_hierarchy_nodes TRANSPORTING NO FIELDS
WITH KEY node_id = object_hierarchy_node_wa-ref_node_id
>>> ASSERT sy-subrc = 0.
ENDIF.
provider has to be specified (except in case of recursion)
IF object_hierarchy_node_wa-ref_node_id IS INITIAL.
ASSERT object_hierarchy_node_wa-provider_id IS NOT INITIAL.
ENDIF.
Thanks in advance,
Louisnote: Note 1075650
Re: Assertion_Failed dump when accessing Design Time for Processes & Forms EP3
regards,
Prakesh. -
How can I get the elapse time for execution of a Query for a session
Hi ,
How can I get the elapse time for execution of a Query for a session?
Example - I have a report based on the procedure ,when the user execute that it takes say 3 min. to return rows.
Is there any possible way to capture this session info. for this particular execution of query along with it's execution elapse time?
Thanks in advance.Hi
You can use the dbms_utility.get_time tool (gives binary_integer type value).
1/ Initialize you time and date of beginning :
v_beginTime := dbms_utility.get_time ;
2/ Run you procedure...
3/ Get end-time with :
v_endTime := dbms_utility.get_time ;
4/ Thus, calculate elapsed time by difference :
v_elapsTime := v_endTime - v_beginTime ;
This will give you time elapsed in of 100th of seconds...
Then you can format you result to give correct print time.
Hope it will help you.
AL -
Saving to SharePoint works only half the time for Windows 7 Users--all the time for Windows XP users
We have a SharePoint 2010 Environment with hardware load balancing, 2 WFEs, 2 Apps Servers and 1 SQL Server. This was built in October 2013. Office Integration and Saving back to SharePoint works all of the time for users on XP. It works sporadically for
users on Windows 7. When Windows 7 users do the following:
Opening an Office Document from computer and saving it to SharePoint
Within a Document Library, using Save As from an opened document
When selecting in a Document Library from the Document Tab> “New” and then the desired content type
Send> Save to SharePoint from within Office Document
They may either be brought to the SharePoint library (correct) or to My Documents (incorrect).
In the case of number 1 (Opening an Office Document from computer and saving it to SharePoint)--using Save and Send will sometimes open the SharePoint library and sometimes open My Documents.
Our URL is https://CompanyName.domainname.com/Sites/SiteCollectionName
The intermediary "Sites" is actually a blank path.
When My Documents is opened I've noted with Fiddler (a web debugger) that we get a 404 on sites:
Could this be the issue?Some things to double check:
Ensure that you have sticky sessions enabled on your load balancer
Check that your WebDav calls are making it to the server
Ensure that you have a root site collection in all your web apps
Just out of curiosity, what is the http request look like for the 404 error?
Chris Givens CEO, Architecting Connected Systems
Blog Twitter -
Can I use my creative cloud account at the same time for my iMac and my MacBook?
Can I use my creative cloud account at the same time for my iMac and my MacBook?
Thank you Sheena!!
Guy
Op 2-jan.-2015, om 12:16 heeft Sheena Kaul <[email protected]> het volgende geschreven:
Can I use my creative cloud account at the same time for my iMac and my MacBook?
created by Sheena Kaul <https://forums.adobe.com/people/Sheena+Kaul> in Adobe Creative Cloud - View the full discussion <https://forums.adobe.com/message/7059158#7059158>
Hi Guy Heyligen,
Absolutely. You can use the creative cloud account on two machines.
You may also refer to the link below:
Creative Cloud Help | Creative Cloud / Common Questions <http://helpx.adobe.com/creative-cloud/faq.html>
Regards,
Sheena
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7059158#7059158 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7059158#7059158
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Adobe Creative Cloud by email <mailto:[email protected].com> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=46 70>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.
Maybe you are looking for
-
K9N Platinum, 4GB of RAM, XP shows 3.25GB
I have a K9N Platinum with 4 sticks of 1024MB Corsair. On POST it detects full 4096MB of memory. CPU-Z also shows 4GB. However, in XP, right-click My Computer, properties, it shows 3.25GB of RAM. Now, I did some googling and the solution to this se
-
Error while posting data from SCM to XI
Dear Expertise, I got a requirement where I need to post data from SCM to XI server. From SCM side it is an ABAP proxy. When I tested the scenario and checked in the MONI of SCM I got an error. But SCM is correctly configured pointing to XI under Tco
-
In Dreamweaver 6, I created a new fluid layout. I set up (4) DIVs. In the 3rd div, I changed the font color. The new color shows up on the website when viewed in my computer desktop, but, when viewed in a tablet and a cell phone, the color of the fon
-
How do i get hold of tech support online
i attached my I phone to my computer on I tunes again to download and update the operating system again, and it AGAIN FROZE now my phone is a #$%^!!%%#! Paperweight! im so very sick of this happening, it has happened BOTH times I attempted to update
-
Displaying a page directly through ahyperlink
HI , I have an application that should notify a user that some event has happened and provide the user with a hyperlink that the user will use to display the details of the corresponding page. Let's say I have a list of applications for something tha