Time Format of device

hi
is there any way by which i can obtain the Time format followed by device during runtime in my java application i.e. whether it is am-pm format or hr format

You can extract the time and format it in any way you want using the Calendar class.

Similar Messages

  • Time format change after update to 4.0.7577.250 on aastra 6725ip

    Hi,
    i make an device update on my aastra 6725ip to version 4.0.7577.250.
    After that update the time format is changed. I found in the changelog that this should be fixed?!
    What todo?
    regards,
    Frank

    Whats the format changed to?
    Can you use settings to change the format? Or do factory reset on phone (hold 4 and 6 while booting).
    Andrew Morpeth
    Lync Server Specialist - Auckland, NZ
    Check out my blog

  • 24 or 12 hour time format

    Hi
    Is it possible to check whether the iPhone is set to display 12 or 24 hour time format?
    I tried checking this by using the NSDateFormatter AMSymbol, but it always seems to return "AM", no matter what time format or locale I have selected on the device.

    I don't know of any way to read any of the system settings directly, but this code is sensitive to the system 24-Hour Time switch:
    NSDateFormatter *dateFormatter = [[NSDateFormatter alloc] init];
    [dateFormatter setDateStyle:NSDateFormatterNoStyle];
    [dateFormatter setTimeStyle:NSDateFormatterShortStyle];
    NSString* currentTime = [dateFormatter stringFromDate:[NSDate date]];
    label.text = currentTime;
    [dateFormatter release];
    For some reason I also can't find any NSDateFormatter property that knows about 24-hour time(?!). I probably just need to look harder, but if nothing else, I think you could reliably detect that format by checking for AM/PMSymbol with rangeOfString.

  • Getting error while synchronising for the first time to get Device ID

    Hi All,
    When I am trying to synchronise for the first time to get device ID I am getting following error.
    Could any body through some light on this please.
    • Synchronization started 
    • Connection set up (without proxy) to: http://XYZ:portno/meSync/servlet/meSync?~sysid=MOB& 
    • Connection to server failed. 
    • Synchronisation problems: Transport-layer (http) sync exception raised (root cause: Exception while synchronizing (java.io.IOException: Not in GZIP format)) 
    Regards,
    Ameer Baba.

    Hi,
    please let us know what patch level your middleware is running on.
    The mobileengine.config file is placed in the MI client installation directory in subfolder settings. On PC it is in
    c:\Program files\Sap Mobile Infrastructure\settings.
    From the URL you mentioned above you are using the "old" technology. Please go the service.sap.com/instguides and follow the setup guid for the old technology.
    When you enter the URL directly into the browser you should get a LOGON popup. This shows the service is running. I would expect that you do not get this popup due to missing setup.
    If you want to use the new sync service in SICF and you have configured this. have a look into the manual. In that case you are missing some settings on the MI client. The problem is, that the old MI client uses old sync service by default.
    Regards,
    Oliver

  • Few bugs: Video podcasts name and 12 / 24 time format

    As a gift for NY I got iPod nano 5th.
    Of course device look great, but...
    1) I am used to watch video podcasts (CNET) on iPod. My previous iPod nano (3rd) displays podcast's episode name if I click center button during playback. It shows time than episode name at the top of screen, very handy to watch a set of episodes. My new iPod nano (5th) displays only time. So, I need stop playback and go to episodes list to check "now playing" episode name, very frustrating. Is it a bag or stupid restriction?
    2) Occasionally my new iPod nano (5th) lost 24 h time format and start display AM/PM. I can't recognize why it happen, but I should go to settings to correct this. And Pedometer daily activity bars graph always displays time in AM/PM despite of time format settings. Is it a bug?

    If the solutions cannot be found in the iPod Nano 5th Gen. User Manual or Apple's Knowledge Base - http://support.apple.com/kb/index?page=search then it is time to call U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273).

  • Day timer format calendar

    Does anyone know of software that can create what you can do with Calendar but in a week at a glance day timer format? IE - a 5 x 7 size with photos on the left and a week calendar on the right?
    Thanks!

    No I do not - but it sounds like a good suggestion for Apple - iPhoto menu ==> provide iPhoto feedback
    LN

  • Unable to open 2 9509 switches at the same time in Cisco Device Manager

    Dear Friends,
    There are a pair of MDS 9509 switches whose management addresses are 172.16.2.197 and 172.16.2.198.
    When we try to manage these Devices through Cisco device manager, the first device opens up without any problem, but when the second 9509 is opened in Cisco Device Manager, it fails giving the following error message:
    "Open udp transport failed: Address already in use: Cannot bind"
    To get around this issue, if we close the first interface to the 9509 switch, then we are able to open up the second 9509 in Device Manager.
    We have this problem only in Cisco device manager. If we open one switch in Cisco device manager and the other switch in Cisco Fabric Manager, it works.
    Also, we can telnet to both the devices successfully at a time.
    The device manager in use is 4.1.
    Please find enclosed the sh version outputs for your kind reference.
    Can you please help me understand the cause of this issue?
    Thanks a lot
    Gautam

    Is it always the same MDS that fails to open, or can you open either one first, and then the second one poses the problem (no matter which one is second)?
    Can you try from a second work station and see if you can open DM to both switched at the same time? I suspect the address it is complaining about is the local workstation IP, not the MDS IP.
    If you open the FM map, then you click on the MDS ICONs, can you open DM to both MDS?
    - Mike

  • During export from Discover to Excel, Time Format changes to Number Format

    Hi
    I have a seconds column which is of number datatype. But in my report, I am converting the number in *0HH:MI:SS* format. For example, I have *4952534 seconds*. So my report is showing *1375:42:14* which is a Time Format. It looks good when I view the data in Discoverer Viewer or Plus. But when I try to export the data to Excel, the time format gets converted to *4952534 seconds*, which is creating problems. So can you suggest on how can I preserve the formatting during export to excel from discoverer.
    Thanks
    Sachin

    Hi,
    Excel will not implement the 0HH:MI:SS data format, it just gets the field as a number. You will have to format the field into text using the calculation from my previous post.
    Rod West

  • Display value in hh:mm time format in SSRS Report

    Hi Everybody,
    I have an SSRS report where one of the column is sum of time values. When I do the summation, the values are coming in this format. In the last column the minute value is getting displayed more than 60. How can I format it to proper time format as hh:mm
    so that it displays as "08:15" . The expression which I am using is "  Sum(CDec(FormatNumber(Fields!Overtime_Hours.Value,2)),"Month"). Your help would be highly appreciated.
    January
    31/1/2014
    21/04/2014
    00:00
    07:75
    00:00
    07:75
    Thanks & Regards,
     RPC
    Regards RCP

    Hi RPC24,
    According to your description, you can calculate the correct value of time summation. Now you want to make the result into proper time format (hh:mm). Right?
    In this scenario, we can convert the time into string type, split the string based on delimiter ":" and convert each part into integer. Then do the calculation for each part and set the hour increase 1 every 60 minutes (we can adjust in expression).
    We have tested this case in our local environment. Here are screenshots for you reference:
    1. The report design looks like below:
    A: =Format(TimeValue(Fields!StartTime.Value.ToString),"hh:mm")
    B:=CStr(SUM(CInt(split(CStr(Format(TimeValue(Fields!StartTime.Value.ToString),"hh:mm")),":")(0)))+SUM(CInt(split(CStr(Format(TimeValue(Fields!StartTime.Value.ToString),"hh:mm")),":")(1)))\60)+":"+CStr(SUM(CInt(split(CStr(Format(TimeValue(Fields!StartTime.Value.ToString),"hh:mm")),":")(1)))
    Mod 60)
    Ps: In this sample, we used Time data type. You may need to do some modification in your expression based on the data type of the time data field.
    2. The result looks like below:
    Reference:
    Summing the Value of HH: MM: SS In SSRS
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • How to get system time format in time stamp

    Hello All,
    I have one problem regarding Time stamp. I want system time stamp format in Time control. If my system date/time format change then automatically my time stamp format should also change.If my system Time stamp format is hh:mm:ss AM/PM dd/mm/yy so in my LabVIEW time stamp format should also same. If System time stamp format hh:mm:ss AM/PM mm/dd/yyyy so in my LabVIEW time stamp format should also same.
    So Please help me its a very important for my automation application.
    Thank You.
    Vinal Gandhi
    Kudos are always Welcome.... :-)
    Vinal Gandhi, CLD
    Software Engineer

    Hi Vinal,
    have you tried the FormatDateTimeString function with a standard string indicator and the "%c" formatcode as described in the help instead of the generic timestamp indicator?
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • SPA9000 and Day time format

    Hello,
      in linksys administration guide for SPA9000 the Day time format is defined as Start time:   and End time.
    Is it possible to have more than one periods of Day time?
    For example lets say i want to define Day time beetween   08:00 and 13:00  and also day time 14:00 until 18:00. Is that possible?
    Thanks
    KM

    Hi Jeff,
      thanks for the reply. Tried your suggestion but it doesnt work. As soon as first end time kicks in thats it. Night time folks until the next day.
    KM

  • HT204074 Is there anyway to override the 90 day timer on a device?

    Does anyone know if you can override the 90 day timer on a device? If an another ID is already associated with that device will it still work?

    You can't override the 90 days, you will need to wait until it's completed. I think that you can still sync content to the iPad from other accounts via your computer's iTunes (though iTunes match, automatic downloads and re-downloading can also tie a computer to an account)

  • Time Format using text variable with replacement path

    Hi Friends,
                                 I've used "Text variable with replacement path" to make the column heading dynamic by replacing the values referring from "0calday"...
    everything is working fine, but here it is displaying the time format like
    YYYYMMDD (20030101), i want it to be displayed DDMMYYYY (01012003) in the column heading... how to make it possible?
    pls waiting for ur inputs, it's an urgent...
    Regards,
    Pattnaik

    Hi Satyakam,
    In the text variable properties make sure that in the replacment path you have chosen "Text" to appear date as per user setting . Other wise as in your case it must be set to "Key" which always shows in the format YYYYMMDD.
    Hope that helps.
    Regards
    Mr Kapadia

  • Data services with SQL Server 2008 and Invalid time format variable

    Hi all
    Recently we have switched from DI on SQL Server 2005, to DS(Date Services) on SQL Server 2008. However I have faced an odd error on the query that I was running successfully in DI.
    I validate my query output using a validation object to fill either Target table (if it passes), or the Target_Fail table (if it fails). Before sending data to the Target_Fail table, I map the columns using a query to the Target_Fail table. As I have a column called 'ETL_Load_Date' in that table, which I should fill it with a global variable called 'Load_Date'. I have set this global variable in the script at the very first beginning of the job. It is a data variable type:
    $Load_Date = to_char(sysdate(),'YYYY.MM.DD');
    When I assign this global variable to a datetime data type cloumn in my table and run the job using Data Services, I get this error:
    error message for operation <SQLExecute>: <[Microsoft][ODBC SQL Server Driver]Invalid time format>.
    However I didn't have this problem when I was running my job on the SQL Server 2005 using Data Integrator. The strange thing is that, when I debug this job, it runs completely successfully!!
    Could you please help me to fix this problem?
    Thanks for your help in advance.

    Thanks for your reply.
    The ETL_Date is a datetime column and the global variable is date data type. I have to use the to_char() function to be able to get just the date part of the current system datetime. Earlier I had tried date_part function but it returns int, which didn't work for me.
    I found what the issue was. I don't know why there were some little squares next to the name of the global variable which I had mapped to the ETL_Date in the query object!!! The format and everything was OK, as I had the same mapping in other tables that had worked successfully.
    When I deleted the column in the query object and added it again, my problem solved.

  • Help needed in Time format

    Hi
    I am using oracle 9i . Is there any option to change the time format ie. for eg: when iam inserting values (in the fields declared as timestamp) as '22-06-2005' it is showing errors but when changed to '22-jun-2005'it is working. In my case i want the values to be inserted in '22-06-2005' format.
    Also is it posssible to change dd-mm-yyyy format to yyyy-mm-dd.
    Thanking you in advance
    Dinny

    Hi
    When i create a having 'ALTER SESSION SET NLS_TIMESTAMP_FORMAT = ''YYYY.MM.DD HH24:MI:SS''' the time format is not getting intialized but when i run the stmt ALTER SESSION SET NLS_TIMESTAMP_FORMAT = 'yyyy-mm-dd'; the time format is getting initialized.
    SQL> CREATE OR REPLACE PROCEDURE set_date_format
    2 AS
    3 BEGIN
    4 Execute Immediate 'ALTER SESSION SET NLS_TIMESTAMP_FORMAT = ''YYYY.MM.DD HH24:MI:SS''';
    5 END set_date_format;
    6 /
    Procedure created.
    SQL> insert into sili values('2003-05-23');
    insert into sili values('2003-05-23')
    ERROR at line 1:
    ORA-01843: not a valid month
    SQL> insert into sili values('2003-jan-23');
    insert into sili values('2003-jan-23')
    ERROR at line 1:
    ORA-01843: not a valid month
    SQL> insert into sili values('23-jan-2005');
    1 row created.
    SQL> ALTER SESSION SET NLS_TIMESTAMP_FORMAT = 'yyyy-mm-dd';
    Session altered.
    SQL> insert into sili values('2003-05-23');
    1 row created.
    SQL> insert into sili values('2003-jan-23');
    1 row created.
    Thanks & regards
    Dinny

Maybe you are looking for