Time function in FR Studio

Hi Experts
Can you please share me time function to insert in FR reports ASAP please...
Thanks in advance
KK

<<Date("h:mm az")>> for pacific standard time
<<Date("h:mm:ss a zzzz")>> Eastern Standard
If you do a search on Date in the help module it will detail all of this information.

Similar Messages

Does Logic Express has the flex time function?

Does the latest Logic Express has the flex time function which can either stretch or shrink the sound wave? I know Logic Pro 9 has that. I am struggling with buying either studio or express
thank you

It does. Express and Studio have the same engine... except that Studio seems to be maintained better these days...
My (worthless) opinion right now, given the two recent releases of Studio with nothing released for Express is if you have the extra money, go with Studio.

HT204406 Hello, I have songs that show they are "Waiting" for download from the cloud but they are greyed out. Some songs in one album are done others in the same album will not download. It is not a time function because i have been working on this for

Hello, I have songs that show they are "Waiting" for download from the cloud but they are greyed out. Some songs in one album are done others in the same album will not download. It is not a time function because i have been working on this for weeks. I have allowed my compter to run for days and the songs are still not accessible. I have a Match subscription and Match is working. If I click on the "Genre" link the greyed out songs show that they are ready for download from the cloud but I cannot download them. I have downloaded over 1500 other songs, so I am trying to understand what is going on here. I would appreciate any help anyone can give me.
Thanks

I did think about that and if I have to I will do that, however there are about 50 songs. I have closed and reopened iTunes several times and I am sure that I have the latest version. It fails right away but I can click on the cloud download icon and download the song that it failed on ... therefore it is not that song "or any one song" causing the issue. Any ideas?

How to use elapsed time function with state machine in Lab VIEW

Hello
I've been trying to use state machine with elapsed time function in order to sequentially start and stop my code. The arrangement is to start the code for 1 minute then stop for 5 minutes. I've attached the code, the problem is when I place the elapsed time function out of the while loop it doesn't work, on the other hand when I place it inside the loop it does work but it doesn't give the true signal to move to the next state.
Could you please have a look to my code and help me to solve this issue.
Regards
Rajab
Solved!
Go to Solution.
Attachments:
daq assistance thermocouple(sate machine raj).vi ‏436 KB

Rajab84 wrote:
Thanks apok for your help
even with pressing start it keeps running on wait case
could you please explain the code for me, the use of Boolean crossing, increment , and equal functions
Best Regards
Rajab
OK..I modded the example to stop after 2 cycles. Also recommend taking the free online LabVIEW tutorials.
run vi. case statement goes to "initialize", shift registers are initialized to their constants. goto "wait"
"start"= false, stay in current state. If true, transition to "1 min" case
reset elapsed timer with True from shift register(counter starts at zero)."time has elapsed"=false, stay in current state(1 min). If true, goto "5min" case
reset elapsed timer with True from shift register of previous case(counter starts at zero)."time has elapsed"=false, stay in current state(5 min). If true, goto "1min" case. Also, bool crossing is looking for "true-false" from "5 min" compare function to add cycle count.
Once cycle count reaches 2, stop while loop....
Attachments:
Untitled%202[1].vi ‏42 KB

I am looking for an app that can unmute my iphone after a preset time, eg 1 or 2 hours. Does anybody know an app with this feature?? The apps I have found are linked to a calendar or a place, I just need the timer function..

I am looking for an app that can unmute my iphone after a preset time, eg 1 or 2 hours. Does anybody know an app with this feature?? The apps I have found are linked to a calendar or a place, I just need the timer function..

thanks. yes i am aware of the VoiceOver feature but it is NOT the solution to my problem. as you said, it is a solution to a different set of issues. i want the text to speech ability because i there are books i need to read but do not have the time to sit down and read them and have become used to listening to them read to me either by a professional human reader or with the text to speech software on the Kindle.
I think Apple makes the best audio devices but i am really disappointed in this inexplainable shortcoming. if apple can give us siri they ought to be able to design a nice little button that i can push to turn on text to speech while i am in a document, book, magazine or webpage. clearly it is possible as apple has added the "reader" button in safari to have web pages dropped into the reader format.
thanks for your suggestion though, it is what everyone suggests but it does not address the issue.

Calling CVI DLL Function from Visual Studio

HI all ,
Iv'e created a DLL using CVI and i'm tring to call one of it's function from visual studio 6.0
I'm getting a general error , is there a specific prototype that i need to set my functions in ordrer to call them ?!
Kobi Kalif
Software Engineer

You will need to distribute the CVI RTE along with your DLL, since anything you write in CVI is going to use the RTE.
As far as calling the DLL functions, you can use the CVI defined macros
<return type> DLLEXPORT DLLSTDCALL <function name> (<param1 type> <param1> ...) {
to declare your functions in the DLL for access by a VS application.
for example
int DLLEXPORT DLLSTDCALL myfunction (int funparam1, double func param2) {
There are options for identifying which functions to export from your DLL, I use "functions marked for export" but there are other choices available. I also include a type library so when you type the name of a DLL funciton in VS6 you see a balloon popup with the function signature. This is a check box in the target settings. You have to create a ".fp" file (function panel file) to collect the function info for the library.
From VB6 you can access the DLL a couple of ways, but I usually add the DLL as a reference.

Using time() function in multithreaded application

I am using time() function in a multithreaded application with NULL argument for getting current time.
Some time it's observed that we get a time one minute earlier than current time (3600 seconds).
Is there a problem in the usage of the function?
I am using expression : currenttime = time(NULL);
I had seen some people using following way - time(&currenttime );
Will above two behaves differently in multithreaded environment?
[I am using Sun C++ 5.5 compiler on Solaris 8]

How do you compare actual time against the time seen by your threads? If your threads are printing the value from time(2) to stdout, it's possible that you're seeing an artifact of thread scheduling and/or output buffering.
I really doubt that you have a concurrency problem, but anyway make sure that you include the -mt option on your compile line:
CC -mt blahblahblah...

I need a timer function to ping the server every 5 secs??using threads.

I need a timer function to ping the server every 5 secs??
using threads...i have to use a thread coz i cant use Timer and Timer Task coz clients r on the JDK1.2 version.I have created a thread which keeps checking th ping msg & any server msg is pings 4 the1st time properly but then it just waits to read the response from server but it doesnt but the server shows that it has send the msgs to client???PLEASE HELP URGENT

Few things are not clear from your post, like, are you using sockets and if you are, how are u reading writing to them (ur sample code would help)...
Anyways if you are, are you doing accept on your socket in a while(true) loop or just once... If you do it only once you will get the first ping message but none afterwards if the other side closes and opens new sockets for every send... What I am suggesting is something like the following:
ss = new ServerSocket(port);
while(true)
     s = ss.accept();
     is = s.getInputStream();
     os = s.getOutputStream();
     reader = new BufferedReader(new InputStreamReader(is));
     writer = new BufferedWriter(new OutputStreamWriter(os));
     String in = reader.readLine();
        // do something with this string
        s.close();
        // put some check here to break out of this infinite loop
}// end of While

MULTIPLE LEAD TIME FUNCTIONALITY

Hi Guys,
can anyone explain about "Multiple lead time functionality in SAP".
whether its related to any particular modules.pls provide any inputs or send some link were i can get this requirements,

hi
please refer to this document
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0901cba-f49e-2910-748c-d7ce4c0c4c1c
you may find it helpful
regards
Aakash Banga

In the numbers app, using the "date and time" function, is it possible to remove the time? I need to put together a list of dates, but I don't need or want times.

In the numbers app, using the "date and time" function, is it possible to remove the time? I need to put together a list of dates, but I don't need or want times.

When formatting your column to date/time, pick Date & time, and then pick the letter i in the circle to the right. Then scroll down and pick "No time"
Jason

Does the Timer() function support multithread?

Hello,
In my application, there would be more than 1000 conversations to be monitored. I am going to design a woker thread for each conversation to determine the timeout of the communication, so I must using the timer mechanism. Due to just can create (max )16 async timers, so I want to use Timer() in the worker thread. I'd like to know if the function support multithread and if it will not be disturbed in a thread?
David

Hi David,
The 'timer' used by the Timer() function is global and not thread specific. Note that Timer() returns the number of seconds elapsed since the FIRST call to the Timer() function. This is independent of the thread where the FIRST and current calls take place. So, the values returned are kind of a global 'time' since the first Timer() call in your program. I would recommend that you FIRST call Timer() in your main thread before running your other threads and then the other values returned in any thread are the 'seconds' since this call.

Time Function in Oracle

Note that there is no specific time function in Oracle.
What is the most efficient way to change the time segment of a Date or Timestamp field (column)?
I need to pick up the date from the system but the time requires manual entry.
Thanks

And if you want to do some calculations with them, this will give you some ideas:
SQL> select sysdate
2       , sysdate + interval '1' minute
3       , trunc(sysdate) + numtodsinterval(7,'hour')
4       , trunc(sysdate) + 7/24
5    from dual
6 /
SYSDATE             SYSDATE+INTERVAL'1' TRUNC(SYSDATE)+NUMT TRUNC(SYSDATE)+7/24
01-10-2007 07:34:02 01-10-2007 07:35:02 01-10-2007 07:00:00 01-10-2007 07:00:00
1 rij is geselecteerd.
SQL> select systimestamp
2       , systimestamp + interval '5' hour
3       , trunc(systimestamp) + numtodsinterval(60 * 7 + 38,'minute')
4       , trunc(systimestamp) + (60 * 7 + 38) / (24 * 60)
5    from dual
6 /
SYSTIMESTAMP
SYSTIMESTAMP+INTERVAL'5'HOUR                                                TRUNC(SYSTIMESTAMP) TRUNC(SYSTIMESTAMP)
01-10-07 07:34:02,296000 +02:00
01-10-07 12:34:02,296000000 +02:00                                          01-10-2007 07:38:00 01-10-2007 07:38:00
1 rij is geselecteerd.Regards,
Rob.

How to write a use time function in elsif

Hai All
I have generated an attendance form and my problem is while i am using elsif insert operation there and there is no updation.
My need is
this is my table structure
EMPCODE NUMBER
EMPNAME VARCHAR2(25)
BARCODE VARCHAR2(25)
INTIME VARCHAR2(25)
OUTTIME VARCHAR2(25)
INTRTIMEIN VARCHAR2(25)
INTROUTTIME VARCHAR2(25)
ATTEND_DATE
when timing between 0145 and 0630 then update in outtime
and 0630 to 1000 then insert in intime column
and 1100 to 1300 then insert in intime column or
update in outtime column and
then 1600 to 1730 then to insert into intime column or else
when intime is not null then update in outtime column
I have tried and only insert id doing opver there Pls tell what wrong i have made
declare
t_in varchar2(25) := :bartime;
t_out varchar2(25) := :bartime;
-- t_date dail_att.attend_date%type;
Begin
go_block('TEST_SRI');
FIRST_RECORD;
LOOP
if :bartime between 0145 and 0615 and t_out is null and t_in is not null then
update dail_att set outtime = :bartime where barcode= :barcode
and ATTEND_DATE = :BARDATE-1 ;
elsif :bartime between 0630 and 1000 and t_in is null then
insert into dail_att(barcode,intime,attend_date)
values(:barcode,:bartime,:bardate);
elsif :bartime between 0630 and 1000 and t_in is null then
update dail_att set outtime = :bartime where barcode= :barcode
and ATTEND_DATE = :BARDATE-1 ;
elsif:bartime between 1130 and 1330 and t_in is null then
insert into dail_att(barcode,intime,attend_date)
values(:barcode,:bartime,:bardate);
elsif :bartime between 1130 and 1330 and t_in is not null then
insert into dail_att(barcode,intrtimein,attend_date)
values(:barcode,:bartime,:bardate);
elsif :bartime between 1615 and 1815 and t_in is null then
insert into dail_att(barcode,intime,attend_date)
values(:barcode,:bartime,:bardate);
elsif :bartime between 1645 and 2000 and t_in is not null and t_out is null then
update dail_att set outtime = :bartime
where barcode= :barcode and outtime is null and ATTEND_DATE = :BARDATE-1;
elsif :bartime between 2000 and 2200 and t_in is not null and t_out is null then
update dail_att set outtime = :bartime
where barcode= :barcode and outtime is null and ATTEND_DATE = :BARDATE;
EXIT WHEN :SYSTEM.LAST_RECORD = 'TRUE' OR :BARCODE IS NULL;
end if;
NEXT_RECORD;
--message('hai');
END LOOP;
delete from dail_att cascade;
forms_ddl('commit');
forms_ddl('truncate');
exception
when others then
forms_ddl('rollback');
message(sqlerrm||dbms_error_Text);
message(sqlerrm||dbms_error_Text);
End;
Regards
Srikkanth.M

I got it by converting by date time function
Edited by: Srikkanth.M on Apr 10, 2010 2:19 PM

Restarting a elapsed time function in a for loop

Hello,
I am having an issue while using an elasped time function inside of a while loop (I wire the Time has elapsed? boolean to the stop function of the while loop), that is consequently inside of a for loop. The elapsed time function works correctly on its own in a while loop, but when added to a for loop will not reset for each iteration of the for loop. I can post an example if it is needed, but has anyone run into this problem before? I have tried wiring all the reset boolean's but I cannot get the timer to reset untill the for loop has finished.
Any suggestions on how to achieve this another way are welcome.
Thanks,
Andrew

I found the issue, I was using 2 timers inside of the for loop on the assumption that they are completely independant of one another....they are not. if time has elapsed on one timer then it uses that time to start off the next timer, kind of a wierd behaviour but I guess I am not really using the timer in a normal manner.
Andrew

Substring Function in Design Studio

Hello all,
I have a question. Is there any substring like function in Design Studio because I have a string and I need to cut the part of the string on the dashboard to show.
For Example
My String: HELLO
I only want to get "EL" from that string and show that on the dashboard.
Is that possible?
I appreciate your help in advanced. Thanks.

Zahid,
As Tammy mentioned Help document has it all.
You can find it in Help of Design Studio application itself.

Time function in FR Studio

Similar Messages

Maybe you are looking for