Time in and out box

Can I create a time in and time out box in forms?

Sure - check out the "Time Sheet" template for an example which you could start from or copy and paste fields from. It uses drop down fields to choose the times, it could be done with seperate drop downs for hours and minutes if you prefer. Go to the "Create New Form" tab and search "Time" to locate the "Time Sheet" template.
Thanks,
Josh

Similar Messages

Email in and out box deleted on start up.

My ipad2 keeps wiping my email account, in and out box, every time I turn it on and then reloads them. How do I solve this?

Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is 'appsolutely' safe!

HELP!! 2.1 update wiped out my in and out boxes in Outlook

I updated my itouch yesterday with 2.1 and it wiped out my in and out e-mail in Outlook. I'm running Windows Vista. If anyone has any advice I would appreciate it. My last .pst backup is too old to salvage the damage done with this update.

Are the other iPods that work iPod touches (or iPhones or iPads)? iOS devices like iPod touches use additional drives to those used by "dumb" iPods.
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
iOS: Device not recognized in iTunes for Mac OS X
Or
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Time machine and mail box

My time machine disk is frequently running out of space. My time machine at 250GB was sized for an 5 year old Power PC mac. Now, I have an Intel mac with a 500GB harddrive. Time machine is able to keep only one month of backups, which isunaceptable.
I suspect that a big part of the problem is that I never moves messages from my inbox. So, every time time time machine runs, it has to do a backup of my entire inbox with 18,000 messages.
My system drive is 500GB of which 163GB is used and 337GB is free. (Since there is so much free space, I rarely clean up the system drive.)
Some questiions:
1. What is the file name of the inbox?
2. How can I determine how much of time machine is devoted to inbox backups?
3. How can I determine if there are any other culprits?
4. Any suggestions on time machine size (though I think the 250GB drive will do OK when I do some cleanup and fix the mbox problem)?
5. Any suggestions on time machine vendors?
Thanks.

1. A mailbox maps to a folder. Each message is a file. They are in the user's Library/Mail folder.
2. No. Only messages new since the last backup are copied.
3. It would have no effect on Time Machine.
The Inbox is for incoming mail. I think most people would say that it is a good idea to store messages in some meaningful system of mailboxes. Just as you don't (I presume) store all your files on your Desktop, messages worth keeping should be put somewhere you can find them. But it's up to you. It has nothing to do with Time Machine.
250 GB for 163 GB of data is pretty small for Time Machine. You ought to have a bigger Time Machine disk.

OTL time in and out VS total Hours

I setup OTL based on that there is a shift starting from 08:00 and ending 16:00. this mean that 8 hours working
when I enter 09:00 to 17:00 ,OTL only count 8 hours working while it is only 7 hours
any suggestion please
thx
Osama
Edited by: user12009731 on 20/07/2010 10:15 ص

Where do you see the 7 hour value? Is it on the details page, do you see another 1 hr entry on that day? Have you setup any OT rule?
--Shiv

Clean Install VS Time Machine for "out of the box" performance

Hi all ^^
Just under a year a go I made the leap of PC to Mac and have never looked back, im super happy with my Mac however I have been experiancing a decrease in performance since Ive been using it, back when I was using a PC I clean installed the OS once a year and then proceeded to add my files back, thus restoring my PC to full performance.
Ive been reading around these forums looking at Time Machine backups, hoping to see 'how much' gets restored when you perform a recovery from time machine, and from what I have read is that everything gets restored. So my question is purely for some advice and clarification
"If I want to restore my Macbook to its "out of the box" performance, Is it viable for me to use a Time Machine back up?"
if not
"If Time Machine Back ups wont help restoring performance, Would it be possible to Clean Install and then extract purely the Files from my TM Back up?" I read another user had issues, the Mac recognised the files belonged to another mac and he couldent use them.
So I wont waffle on any furthur, but im looking for the easist way to clean install or restore performance to my Mac, a long term solution I can use each year
Please and Thank you
Em

Thankyou for your answer
Im quite a clean freak when it comes to my PC, I keep my desktop bare, things I dont use remain unloaded.etc
I think as I am without a Defrag or Disk Clean up tool I feel abit helpless to maintain optimal standards. I not very experianced with the in's and out's of computers but all I really want on my Mac are my Files, Applications and the OS, nothing more.
I appreciate your time and experiance, so ild ask instead: In your experiance is it worth performing a clean install? I have hadly any junk on my Mac, and from the tone of your post you beleive a program such as MacKeeper would be sufficent?
Futhurmore a clean install once a year isnt worth it? I depend alot on what people have told me, so I may have fallen victim to a rumour :S

Firefox flashes - going in and out of full screen hundreds of times a second

My computer at home has a strange problem. When I type in the google search box or in a field on a web page, it has a habit of going in and out of full screen mode several times a second. I have to press escape to stop it and when I do so its luck of the draw whether its in full screen or not.
== This happened ==
Every time Firefox opened
== Since I installed 3.6.3

Hi. Can someone help me with this as I will have to install something else if I can't sort it out and FF is by far my favourite browser.

SUBTITLES CUT OFF AND OUT OF BOUNDING TEXT BOX

SUBTITLES CUT OFF AND OUT OF BOUNDING TEXT BOX
by Ben Martin on Jun 24, 2008 at 9:57:39 am
I use Encore version 2.0 and have problem with subtitles on a 30 minutes video. I have not imported these subtitles, but made them, one clip at the time. The first 10 minutes is fine, each subtitle is within a bounding box (the bounding box was stretched up to the first inner rectangle of the Safe Area). They can be seen fine on the timeline and on the DVD.
However from one particular subtitle onwards, all the subtitles clips seem to suffer from the same problem. When I play them on the timeline the long subtitles are cut off at the right end. When I click on them within the monitor, I see that they are not within a normal bounding box. Instead the text is sort of "embedded" within a structure of white squares (similar to a bounding box), but any attempt to strecth that "structure" by pulling a square with a text tool, only deform and extend the text itself.
I have tried to create a blank subtitle clip after the last "good" one, using the Add subtitle button on the monitor, but it won't create an empty bounding box within which I could type or paste the text. It works if I try to create an empty clip in the "good" area of the time line (the first 10 minutes), but not before or after that first bad clip I mentioned above. It is as if there was something bad on the timeline and any attempt to create a proper bounding box clip is impossible.
Is there a setting that I can change? or is it a bug in the programme?
Any help would be appreciated. Thanks.
Ben Martin
Payday

In order to aviod stretching the existing text, you must use text tool to resize the boundry box.

TS3899 I am receiving incoming emails on my iphone5, but my replies sit in the out box for days. I have checked the IP address, etc and that all seems to be correct. Any suggestions please?

I recently purchased an iphone 5.
All the settings have been copied over from my MacPro and all seems to be working fine EXCEPT for out going emails.
Emails come in even when I am out at work, but can I reply - NO - replies sit in the out box for days and then suddenly disappear. I have check all the settings and they seems fine. I have tried turning off the wireless and turning it back on. Some time that works.
Why am unable to send emails even when I am at home near my router?
Any suggestions would be gratefully received.

OK, that at least means that you won't have to start from scratch again;-)
You could try to re-install only the SyncServices.framework framework since that seems to be broken or corrupt - using Pacifist, you can re-install only parts of the original system from your original disks.
Another approach would be to re-install the latest system update - this is probably the easier solution and might already be enough:
http://www.apple.com/support/downloads/macosx1046comboforintel.html
Andreas

My earpeice on my Iphone4 does not work. It acts as if i still have earphones plugged in. I have tried plugging in and out the earphone several times but it still has not resolved the issue. I have rebooted my phone but the problem still exits. Suggestion

Hi, I am using and Iphone 4 with OS 4.2.1, I recently started facing issues with my iphones earpeice. It acts as if the earphones are still connected. I have tried plugging in and out the earphones several times as per several posts confirming a fix for the issue, however i am still facing the problem. Please suggest..!!!!

We had the same problem, but figure out the solution.
You MUST have at least 1 song added to your ITUNE! After you add a free song, then everything else should work as normal!
Hope this helps!

I am no musician, but have owned an iMac now for around four years. During that time I have had Garageband installed. I have dipped in and out very occasionally as I would like nothing more than to be able to get my head around it just for my own amusemen

I am no musician, but have owned an iMac now for around four years. During that time I have had Garageband installed. I have dipped in and out very occasionally as I would like nothing more than to be able to get my head around it just for my own amusement really. I would at least like to be able to record my electric guitar with loops and tracks etc, just try to be a bit creative and see what comes out. The problem that I have is that perhaps its me, but every time I try to get to grips with this software, I just can't seem to get my head around it, even to begin to do something. I have now recently downloaded 10.0.2 which is confusing in itself, as, as far as I can ascertain that is actually version 11, but I'm not even sure about that. I have also recently purchased a Rocksmith RealTone Cable to connect my guitar. I can sometimes get a sound come out, but nothing to brilliant. And every time I try to set something up, it just doesn't seem to work out. I end up hitting buttons and controls in the simple hope that I may hit the correct control in order to get some sort of result. But I'm kind of fumbling in the dark with this. I have trawled the Internet just trying to find either a good manual or video tutorials for absolute beginners, but there just simply doesn't seem to be anything of that nature out there and what there is appears always to be very sketchy and not particularly detailed in explaining anything properly, and so I always find myself seemingly jumping in with both feet and just struggling to try and find a foothold with this on how to really begin. It is so frustrating as I can see the fantastic potential of this software, but just can't understand how to use it properly. If there is anyone out there who may be able to offer me some advice with this, I would be most grateful indeed... Many Thanks.

I have now recently downloaded 10.0.2 which is confusing in itself, as, as far as I can ascertain that is actually version 11, but I'm not even sure about that.
Version 10.0.2 is the newest version and the successor to GarageBand '11 (version 6.0.5).
The '11 is referring to the iLife '11 suit of multimedia application - the older GarageBand was a part of this bundle.
Have a look at Edgar's graphical enhanced manuals, the explain very detailed how things work and why. You can buy them as iBooks from the iBook store or directly from the page:
http://DingDingMusic.com/Manuals/

I just bought Quick time Pro and I can't get it to install. It shows a yellow box in my application folder, but I can't get it to work. Help!

I just bought Quick time Pro and I can't get it to install. It shows a yellow box in my application folder, but I can't get it to work. Help!

you launch QT then go to its REGISTRATION

Trying to restore after getting a new hard drive. I can see the backup on the Time Capsule and on the correct date but it is Greyed out. That is it wont let me open it and restore the machine. Have tried also Migration Assistant, no luck.

Trying to restore after getting a new hard drive. I can see the backup on the Time Capsule and on the correct date but it is Greyed out. That is it wont let me open it and restore the machine. Have tried also Migration Assistant, no luck.

https://discussions.apple.com/thread/5210788?tstart=0
At startup hold down the Command+Option/Alt+r keys until you see a globe on the screen. Then use disk utility to partition and format the drive HSF+ and then select Reinstall Mac OS X. whatever version of OS X that originally came on your system will be installed and then you can upgrade back to Mavericks.

I bought MACkeeper and used it to cleanup my computer. I have a Imac intel, When I didi this it deleted all my files. I tried to do a time machince. and it didn't work. so I pulled the files out of trash and my computer still isn't runing right.

I bought MacKeeper to help make my Imac intel faster. Insted it deleted all my files.
I tried to recover using time Machine, and it didn't recover back to yesterday. So I started to pull
the files and Applications out of trash. This just got me lipping along. It ran slower and would get
the spining wheel of death. I finaly gave in and thought I would reinstall Lion and everything would be
great. Well wrong, I seem to be starting fine, but all my files are gone. When I go in to time Machine
I see a device drive name (xxx). I go in that device and all my files are there. how do I pull them to the new
install of Lion? So I can be happy again. Thank you for all your time and help.

Do not install MacKeeper:
https://discussions.apple.com/docs/DOC-3026
(Please note that references to the original developers, Zeobit, should now refer to Kromtech Alliance Corp, who acquired MacKeeper and PCKeeper from ZeoBit LLC in early 2013.

I have Adobe Photoshop Elements 8 for Windows 7. I need to re-install it because my computer crashed. I saved the outer box, but I do not see a serial number and it is asking for it when I am trying to install the CD software. I went online, but the only

I have Adobe Photoshop Elements 8 for Windows 7. I need to re-install it because my computer crashed. I saved the outer box, but I do not see a serial number and it is asking for it when I am trying to install the CD software. I went online, but the only serial number I see is when I registered the Photoshop Elements 2.0.

The serial number will be on the disc case, not the outer box. Find your serial number quickly

Time in and out box

Similar Messages

Maybe you are looking for