Time in migration status window is incorrect

It appears as though the time in the migration status preview window is off by 4-6 hours? I just created a test job at 11:53 AM local time and it shows as created at 5:53 PM. The server has the correct time.
Anyone else seeing this?

Hi,
This is Exchange forum. Actually, we have a dedicated support team regarding the Microsoft Windows Server. I recommend you ask your question on our Windows Server forum which is staffed by more experts specializing in this kind of problems. For your convenience:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?category=windowsserver
Thanks for your understanding. If you have any problem with Exchange server, welcome to our Exchange forum.
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support

Similar Messages

Migration status at any point of time

Hello to All,
I am running a migration scripts (which are actually a procedures) to pick the data from the source table to target
table.
My requirement is to find out the migration status at any point of time.Is there any way to do it?
Please help.
Best regards,
Pavan

Hi Pavan,
Does your source table have columns to store the status, error message?
In general, stage tables should have a status and error message column which are updated by the migration script with the status of that particular record.
You can check these columns to get the status.
For eg
select status, error_message, count(*)
from you_table
group by status, error_message;The above script will give the number of records Successfully processed, errored during migration.
Regards
Imran

Time Machine "Delete Backup" Status window

Hey all,
I am trying to delete an old backup inside Time Machine - did the old-fasioned way by "conjuring" the time machine with the stacked Finder windows on a starfield.
I arrowed up to the oldest backup and on the Action (with the gear symbol) dropdown I selected "Delete Backup". I get a confirmation prompt to "delete the selected backup" and I hit "Yes". Then.... where is the "Delete Backup" status window?
I know "delete backup" would take a while just like the backup process - however , at least we see the backup status on the Time Machine Preferences window. It seems like the Time Machine Preference window only shows the backup status. Could someone share how we could bring up the "Delete Backup" status window?
Thanks!

Unfortunately (or fortunately) the delete backup had completed by the time I saw this message
I went back to the Time Machine starfield windows and I no longer see the oldest backup (I noted down the date of the oldest backup).
Next time when I do another "delete backup" I'll look for that "spinning gear at the bottom right" as you indicated.   I assume that is a "hovering" spinning gear that is separate from the desktop dock?   If you have a screenshot (its ok if you don't) that would be great - thanks again for the reply. This will help anyone who might be looking for the same answer as I am.

Can I stop Time Machine from showing the little status window?

Hello,
I have Time Machine backing up successfully to an attached USB drive. I've only had it for a couple of days, but I noticed it started popping up a small "status" window whenever it's backing up. It's the same style window you get when you're downloading something. Is there an option so that doesn't pop up when TM is active? The icon on the top is enough notification for me. This one is kind of annoying!

Pondini wrote:
There is a small window with a progress bar, when Time Machine is doing it's initial full backup. Surely you're not seeing that every time?
Not every time, but definitely more than once. How could I post a screen shot here? I can if needed. I don't think it was a full backup, since it said it was only about 20 GB in size.
If it's really doing a full backup each time, something is clearly wrong. If in doubt, Click here to download the +Time Machine Buddy+ widget. It shows the messages from your logs for one TM backup run at a time, in a small window. Navigate to the most recent backup that showed the window, then copy and post all the messages for that run here.
Also tell us how much data is on your system (the +Estimated size of full backup+ under the exclusions box in TM Preferences > Options), how large your TM drive is, and how much data is on it (via +Get Info+ on the drive).
Estimated size of full backup 49.37 GB
Size of TM drive 320 GB (it's actually a 1TB USB drive, but I partitioned it)
Data on my MBP drive: 49.54 GB
As I type this it's doing another backup, but no progress bar, and it's only 18.9 MB
Anyway thanks for the tip on the TM Buddy. Here is the log from the last big one it did from when I posted the question...looks like there are a bunch of errors! FYI in the logs below "Time Capsule" is what I called the USB drive partition. It's not "the" Apple Time Capsule.
Starting standard backup
Error: (5) getxattr for key:com.apple.backupd.HostUUID path:/Volumes/Time Capsule/Backups.backupdb/Luca’s MacBook Pro
Error: (5) getxattr for key:com.apple.backupd.BackupMachineAddress path:/Volumes/Time Capsule/Backups.backupdb/Luca’s MacBook Pro
Error: (5) getxattr for key:com.apple.backupd.HostUUID path:/Volumes/Time Capsule/Backups.backupdb/Luca’s MacBook Pro 7
Error: (5) getxattr for key:com.apple.backupd.BackupMachineAddress path:/Volumes/Time Capsule/Backups.backupdb/Luca’s MacBook Pro 7
Error: (5) getxattr for key:com.apple.backupd.HostUUID path:/Volumes/Time Capsule/Backups.backupdb/Luca’s MacBook Pro 9
Error: (5) getxattr for key:com.apple.backupd.BackupMachineAddress path:/Volumes/Time Capsule/Backups.backupdb/Luca’s MacBook Pro 9
Backing up to: /Volumes/Time Capsule/Backups.backupdb
Error: (5) getxattr for key:com.apple.backupd.BackupMachineAddress path:/Volumes/Time Capsule/Backups.backupdb/Luca’s MacBook Pro 9
Error: (5) getxattr for key:com.apple.backupd.HostUUID path:/Volumes/Time Capsule/Backups.backupdb/Luca’s MacBook Pro 9
Error: (5) getxattr for key:com.apple.backupd.BackupMachineAddress path:/Volumes/Time Capsule/Backups.backupdb/Luca’s MacBook Pro 7
Error: (5) getxattr for key:com.apple.backupd.HostUUID path:/Volumes/Time Capsule/Backups.backupdb/Luca’s MacBook Pro 7
Error: (5) getxattr for key:com.apple.backupd.BackupMachineAddress path:/Volumes/Time Capsule/Backups.backupdb/Luca’s MacBook Pro
Error: (5) getxattr for key:com.apple.backupd.HostUUID path:/Volumes/Time Capsule/Backups.backupdb/Luca’s MacBook Pro
Error: (-36) Creating directory Luca’s MacBook Pro 2
Error: (-36) Creating directory Luca’s MacBook Pro 3
Error: (-36) Creating directory Luca’s MacBook Pro 4
Error: (-36) Creating directory Luca’s MacBook Pro 5
Error: (-36) Creating directory Luca’s MacBook Pro 6
Error: (-36) Creating directory Luca’s MacBook Pro 8
Error: (-36) Creating directory Luca’s MacBook Pro 10
Error: (-36) Creating directory Luca’s MacBook Pro 11
Error: (-36) Creating directory Luca’s MacBook Pro 12
Backup content size: 46.4 GB excluded items size: 3.3 GB for volume Macintosh HD
No pre-backup thinning needed: 52.13 GB requested (including padding), 165.78 GB available
Copied 5.6 GB of 43.0 GB, 1572 of 615842 items
Copied 17.8 GB of 43.0 GB, 1736 of 615842 items
Copied 26.1 GB of 43.0 GB, 36361 of 615842 items

Migration from windows to Linux -- Autoconfig Error

Hi DBA's
I am doing Migration from Windows 2000 to Linux 4.0ES Migration.
Application - 11.5.10.2, Database - 9.2.0.6.
Documents Followed
230627.1 - Export/Import Process for Oracle Applications Release 11i Database Instances Using Oracle9i Enterprise Edition
238276.1 - Migrating to Linux with Oracle Applications Release 11i
Till now i have finished as follows.
1) Doc -238276.1
Section 1 completed on the source instance.
2) Doc -230627.1
Section 1, Section 2, Section 3 completed.
3) Now i started 238276.1
Section 2.
Step 1- updated the manifest --- Completed
Step 2- copy appl_top and Common_top -- Completed
Step 3- Clone the AutoConfig XML context file on the Target System -- Completed.
Step 4- Install iAS Oracle Home -- Completed.
Step 5- Apply the Oracle interoperability patches for Red Hat Enterprise Linux -- Ignored
Note- Because My Application is 11.5.10.2.
Step 6- Run AutoConfig setup phase on the Target System -- Error out.
I run the command as follows.
# cd <AD_TOP>/bin
# ./adconfig.sh run=INSTE8_SETUP contextfile=<Target System ctxfile>
[applmgr@aqherp bin]$ ./adconfig.sh run=INSTE8_SETUP contextfile=/s03/oracle/prodappl/admin/PROD_aqherp.xml
Enter the APPS user password: Script execution phase specified: INSTE8_SETUP
The log file for this session is located at: /s03/oracle/prodappl/admin/PROD_aqherp/log/01122007/adconfig.log
AutoConfig is configuring the Applications environment...
AutoConfig will consider the custom templates if present.
Using APPL_TOP location : /s03/oracle/prodappl
ERROR: Unable to set CLASSPATH
Neither of the following are present
/usr/jre/lib/rt.jar
/usr/lib/rt.jarERROR: Unable to set CLASSPATH
Neither of the following are present
/usr/jre/lib/rt.jar
/usr/lib/rt.jar Classpath :
Version Conflicts among development maintained and customized templates encountered; aborting AutoConfig run.
The logfile for this session is located at: /s03/oracle/prodappl/admin/PROD_aqherp/log/01122007/adconfig.log
[applmgr@aqherp bin]$
==========================LOG FILE SHOWS=================================================
Starting AutoConfig at Mon Jan 12 20:07:21 2009
Using adconfig.pl version 115.81
Script execution phase specified: INSTE8_SETUP
Classpath :
Version Conflicts among development maintained and customized templates encountered; aborting AutoConfig run.
Please help me to resolve this issue.
Best Regards,
Suresh Gelda

Hi DBA's
I am able to run the autoconfig now, but i am getting errors in that
Please check log file which i am pasting here
Checking version of /s03/oracle/prodcomn/java/jdbc14.zip
File exists
RC-50208: Exception in method TimedProcessProcess.run
Raised by oracle.apps.ad.util.TimedProcess$TimedProcessProcess: java.io.IOException: Cannot run program "/s03/oracle/prodappl/ad/11.5.0/bin/adident": java.io.IOException: error=2, No such file or directory
File Version: -1
File version could not be obtained
Skipping updating s_fnd_jdbc_stmt_cache_size.
Updated s_fnd_jdbc_stmt_cache_size to 0
Configuring MOVEJSPPAGEREPOS settings ...
Execute SYSTEM command : mv /s03/oracle/prodcomn/html/_pages /s03/oracle/prodcomn
/s03/oracle/prodcomn/html/_pages is moved to /s03/oracle/prodcomn/_pages successfully
ERRORCODE = 1 ERRORCODE_END
.end std out.
*******FATAL ERROR*******
PROGRAM : (/s03/oracle/prodappl/fnd/11.5.0/patch/115/bin/txkSetConfig.pl)
TIME : Tue Jan 13 12:23:09 2009
FUNCTION: [ Level 1 ]
ERRORMSG: ERROR: Reading /tmp//orainst/unix.rgs: No such file or directory
STACK TRACE
at /s03/oracle/prodappl/au/11.5.0/perl/TXK/Error.pm line 219
     TXK::Error::printMsg('TXK::Error', 'ERROR: Reading /tmp//orainst/unix.rgs: No such file or direct...') called at /s03/oracle/prodappl/fnd/11.5.0/patch/115/bin/txkSetConfig.pl line 92
.end err out.
Result : FAILED
===========================================================================
Generate Tns Names
Logfile: /s03/oracle/prodappl/admin/PROD_aqherp/log/01131223/NetServiceHandler.log
     Classpath : /usr/java/jdk1.6.0_11/jre/lib/rt.jar:/usr/java/jdk1.6.0_11/lib/dt.jar:/usr/java/jdk1.6.0_11/lib/tools.jar:/s03/oracle/prodcomn/java/appsborg2.zip:/s03/oracle/prodcomn/java
Updating s_tnsmode to 'generateTNS'
UpdateContext exited with status: 0
java.lang.Exception: Error while generating listener.ora.
     at oracle.apps.ad.tools.configuration.NetServiceHandler.generate806Listener(NetServiceHandler.java:2503)
     at oracle.apps.ad.tools.configuration.NetServiceHandler.processNode(NetServiceHandler.java:2272)
     at oracle.apps.ad.tools.configuration.NetServiceHandler.main(NetServiceHandler.java:2978)
AC-50480: Internal error occurred: java.lang.Exception: Error while generating listener.ora.
Error generating tnsnames.ora from the database, temperory tnsnames.ora will be generated using templates
Instantiating Tools tnsnames.ora
Tools tnsnames.ora instantiated
Web tnsnames.ora instantiated
adgentns.pl exiting with status 512
ERRORCODE = 512 ERRORCODE_END
.end std out.
.end err out.
================================================================================
Uploading file system Context file and its templates to the database
Context file :
/s03/oracle/prodappl/admin/PROD_aqherp.xml
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL=''
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : aqherp
sDbDomain : qudrah.com
sDbPort : 1521
sDbSid : PROD
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@aqherp.qudrah.com:1521:PROD
Connection obtained
-------------------ADX Database Utility Finished---------------
Result : Failed to upload the Context file to the DataBase
     Uploading Context file and its templates to the database...FAILED
StackTrace:
java.lang.Exception: oracle.apps.ad.autoconfig.oam.InDbCtxFileException: SQLException : ORA-04068: existing state of packages has been discarded
ORA-04063: package body "APPS.FND_GSM_UTIL" has errors
ORA-06508: PL/SQL: could not find program unit being called
ORA-06512: at line 1
     at oracle.apps.ad.tools.configuration.FileSysDBCtxMerge.updateDBCtx(FileSysDBCtxMerge.java:685)
     at oracle.apps.ad.tools.configuration.FileSysDBCtxMerge.updateDBFiles(FileSysDBCtxMerge.java:222)
     at oracle.apps.ad.context.CtxValueMgt.processCtxFile(CtxValueMgt.java:1663)
     at oracle.apps.ad.context.CtxValueMgt.main(CtxValueMgt.java:709)
=========================================================================================
After Setting Environment
ORACLE_HOME          : /tmp/
LD_LIBRARY_PATH          : /tmp//lib:/usr/X11R6/lib:/usr/openwin/lib:/usr/java/jdk1.6.0_11/jre/lib/i386/server:/usr/java/jdk1.6.0_11/jre/lib/i386:/usr/java/jdk1.6.0_11/jre/../lib/i386:/tmp//lib:/usr/X11R6/lib:/usr/openwin/lib
PATH               : /tmp//bin:/usr/bin:/usr/ccs/bin:/usr/sbin:/usr/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/s03/oracle/proddb/9.2.0/bin
ORA_NLS               : /tmp//ocommon/nls/admin/data
TNS_ADMIN          : /tmp//network/admin/PROD_aqherp
NLS_LANG               : American_America.AR8MSWIN1256
NLS_DATE_FORMAT          : DD-MON-RR
NLS_NUMERIC_CHARACTERS     : .,
NLS_SORT               : BINARY
CONTEXT_NAME          : PROD_aqherp
AD_TOP               : /s03/oracle/prodappl/ad/11.5.0
FND_TOP               : /s03/oracle/prodappl/fnd/11.5.0
TXK_TOP               : /s03/oracle/prodcomn/rgf/PROD_aqherp
APPLTMP : /s03/oracle/prodcomn/temp
TWO_TASK               : PROD
ORACLE_LOCALPREFERENCE     : /tmp//tools/admin
TNS CONNECT STRING     : PROD
SQLPLUS               : /s03/oracle/proddb/9.2.0/bin/sqlplus
Setting of Environment completed.
SQL Command: SELECT language_code||',' FROM fnd_languages WHERE installed_flag IN ('B','I') AND language_code NOT IN ('US', 'SQ','IS','LT','VN')
ERROR DESCRIPTION:
(*******FATAL ERROR*******
PROGRAM : (/s03/oracle/prodcomn/admin/install/PROD_aqherp/txkFrmUTF8.pl)
TIME : Tue Jan 13 12:24:40 2009
FUNCTION: TXK::SQLPLUS::validateConnectInfo [ Level 3 ]
MESSAGES:
SQLPLUS executable not found in ORACLE_HOME/bin
STACK TRACE
at /s03/oracle/prodappl/au/11.5.0/perl/TXK/Error.pm line 167
     TXK::Error::abort('TXK::Error', 'HASH(0x810dd30)') called at /s03/oracle/prodappl/au/11.5.0/perl/TXK/Common.pm line 299
     TXK::Common::doError('TXK::SQLPLUS=HASH(0x853767c)', 'SQLPLUS executable not found in ORACLE_HOME/bin', 'undef') called at /s03/oracle/prodappl/au/11.5.0/perl/TXK/Common.pm line 314
     TXK::Common::setError('TXK::SQLPLUS=HASH(0x853767c)', 'SQLPLUS executable not found in ORACLE_HOME/bin') called at /s03/oracle/prodappl/au/11.5.0/perl/TXK/SQLPLUS.pm line 346
     TXK::SQLPLUS::validateConnectInfo('TXK::SQLPLUS=HASH(0x853767c)') called at /s03/oracle/prodappl/au/11.5.0/perl/TXK/SQLPLUS.pm line 267
     TXK::SQLPLUS::setConnectInfo('TXK::SQLPLUS=HASH(0x853767c)', 'HASH(0x8537880)') called at /s03/oracle/prodappl/au/11.5.0/perl/TXK/TechstackDB.pm line 588
     TXK::TechstackDB::_getSQLValue('TXK::TechstackDB=HASH(0x853755c)', 'SELECT language_code||\',\' FROM fnd_languages WHERE installe...') called at /s03/oracle/prodappl/au/11.5.0/perl/TXK/TechstackDB.pm line 563
     TXK::TechstackDB::getSQLValue('TXK::TechstackDB=HASH(0x853755c)', 'SELECT language_code||\',\' FROM fnd_languages WHERE installe...') called at /s03/oracle/prodcomn/admin/install/PROD_aqherp/txkFrmUTF8.pl line 147
     eval {...} called at /s03/oracle/prodcomn/admin/install/PROD_aqherp/txkFrmUTF8.pl line 112
ERRORCODE = 1 ERRORCODE_END
.end std out.
.end err out.
======================================================================================================
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /s03/oracle/prodcomn/admin/install/PROD_aqherp
adgendbc.sh INSTE8_SETUP 1
adgenjky.sh INSTE8_SETUP 1
afcpnode.sh INSTE8_SETUP 1
afgcsreg.sh INSTE8_SETUP 1
txkMultinode.sh INSTE8_SETUP 1
wdbsvr.sh INSTE8_SETUP 1
Directory: /usr/bin/perl -I /usr/lib/perl5/5.8.5/i386-linux-thread-multi -I /usr/lib/perl5/5.8.5 -I /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi -I /usr/lib/perl5/site_perl/5.8.4/i386-linux-thread-multi -I /usr/lib/perl5/site_perl/5.8.3/i386-linux-thread-multi -I /usr/lib/perl5/site_perl/5.8.2/i386-linux-thread-multi -I /usr/lib/perl5/site_perl/5.8.1/i386-linux-thread-multi -I /usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi -I /usr/lib/perl5/site_perl/5.8.5 -I /usr/lib/perl5/site_perl/5.8.4 -I /usr/lib/perl5/site_perl/5.8.3 -I /usr/lib/perl5/site_perl/5.8.2 -I /usr/lib/perl5/site_perl/5.8.1 -I /usr/lib/perl5/site_perl/5.8.0 -I /usr/lib/perl5/site_perl -I /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi -I /usr/lib/perl5/vendor_perl/5.8.4/i386-linux-thread-multi -I /usr/lib/perl5/vendor_perl/5.8.3/i386-linux-thread-multi -I /usr/lib/perl5/vendor_perl/5.8.2/i386-linux-thread-multi -I /usr/lib/perl5/vendor_perl/5.8.1/i386-linux-thread-multi -I /usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi -I /usr/lib/perl5/vendor_perl/5.8.5 -I /usr/lib/perl5/vendor_perl/5.8.4 -I /usr/lib/perl5/vendor_perl/5.8.3 -I /usr/lib/perl5/vendor_perl/5.8.2 -I /usr/lib/perl5/vendor_perl/5.8.1 -I /usr/lib/perl5/vendor_perl/5.8.0 -I /usr/lib/perl5/vendor_perl -I . -I /s03/oracle/prodappl/au/11.5.0/perl /s03/oracle/prodcomn/admin/install/PROD_aqherp
txkFrmUTF8.pl INSTE8_SETUP 1
AutoConfig is exiting with status 7
Best Regards,

Issues with Shell32.dll, NTDLL.DLL and Migration from Windows 2003 to Windows 2012

Hello all,
I am new to ThinApp and working as a consultant to help a company migrate older Windows 2003 software to Windows 2012. They have purchased ThinApp 5.0.4.5 so that is what we will be using.
We have created a clean 2003 VM and did a pre-scan
We loaded the application and configured it and then did a capture.
We then tested the capture the 2003 VM and it works
We then loaded the capture on a Clean 2003 VM and it works
We then loaded onto a 2012 VM and when running the app from a command window get an error -missing import shell32.dll:StrCpyNW
If we run the capture in Emulation Mode on 2012 VM, we do not get the Shell32.dll error but instead the cmd fails with a Fault Module Name - NTDLL.DLL error
I am sure I am just missing the correct location to identify or configure the capture - but do not have the experience to know where yet. (Taking training next week).
Until then, is there any suggestions which I can try?
Thanks for your time in advance,
Vince

Tried and done that. The main issue while configuring the printer from the printer Web Interface is that there is no access to the Digital Sending section due to a problem with the "Sun Java plug in" I think the code mentions 1.31. or similar.
We downloaded the java plug in and installed it. No progress.
We reset the printer to defaults and reconfigured it .. It sees the smtp gateway and access it but fails sending email with scanned documents..
We have tried in very different ways. We connected the printer to another domain SBS server 2003 and it works beautifully. So, I have no idea on what is the problem. We created a firewall exception for ports 390. 1783 from the SBS to the Printer
and still no go..
We have tried four different accounts and nothing. Same results as stated originally.
Any other suggestions??
JFM

ADPrep Migration from Windows Server 2003 to 2012 Foundation Server fails with error 0x80004005

Hi all,
Having a problem the forums and Google have been unsuccessful in helping me with. Server is Windows 2003 R2, migrating to Windows Server 2012 foundation. Have tried the AD Migration on the new 2012 Foundation server both as a standalone server
and a domain server member before running the migration. I get the following error:
ADPrep execution failed --> System.ComponentModel.Win32Exception (0x80004005): A device attached to the system is not functioning
I've checked the ADprep logs and have found the following:
[2013/01/22:11:15:01.000]
Adprep was about to call the following LDAP API. ldap_search_s(). The base entry to start the search is cn=abd97102-88dd-4013-a009-0e2c2f967ff6,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=apl,DC=local.
[2013/01/22:11:15:01.001]
LDAP API ldap_search_s() finished, return code is 0x0
[2013/01/22:11:15:01.001]
Adprep checked to verify whether operation cn=abd97102-88dd-4013-a009-0e2c2f967ff6,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=apl,DC=local has completed.
[Status/Consequence]
The operation GUID already exists so Adprep did not attempt to rerun this operation but is continuing.
[2013/01/22:11:15:01.001]
Adprep was about to call the following LDAP API. ldap_search_s(). The base entry to start the search is cn=134428a8-0043-48a6-bcda-63310d9ec4dd,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=apl,DC=local.
[2013/01/22:11:15:01.001]
LDAP API ldap_search_s() finished, return code is 0x20
[2013/01/22:11:15:01.001]
Adprep verified the state of operation cn=134428a8-0043-48a6-bcda-63310d9ec4dd,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=apl,DC=local.
[Status/Consequence]
The operation has not run or is not currently running. It will be run next.
[2013/01/22:11:15:01.021]
Adprep was unable to complete because the call back function failed.
[Status/Consequence]
Error message: Unable to access the computer "SERVER.apl.local". The network path was not found.
(0x80070035).
[User Action]
Check the log file ADPrep.log, in the C:\Windows\debug\adprep\logs\20130122111500 directory for more information.
DSID Info:
DSID: 0x1811132a
winerror = 0x1f
NT BUILD: 9200
NT BUILD: 16384
[2013/01/22:11:15:01.021]
Adprep was unable to update forest information.
[Status/Consequence]
Adprep requires access to existing forest-wide information from the schema master in order to complete this operation.
[User Action]
Check the log file, ADPrep.log, in the C:\Windows\debug\adprep\logs\20130122111500 directory for more information.
We did have AVAST Antivirus installed on the server but this was removed. Any idea's?
Jason.
Consultant | Nerd | Visionary. http://www.ethertech.com.au/ | http://www.deeperstates.com.au

Hi Biswajit et. al., thanks for your help thus far, it is greatly appreciated...
Unfortunately I had already disabled the NIC's on both hosts. They currently remain disabled. I've just tried turning off IPv6 as well and no luck.
PortQry came back fine (I think) :)
=============================================
Starting portqry.exe -n server.apl.local -e 135 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 135 (epmap service): LISTENING
Using ephemeral source port
Querying Endpoint Mapper Database...
Server's response:
UUID: 3c4728c5-f0ab-448b-bda1-6ce01eb0a6d5 DHCP Client LRPC Endpoint
ncalrpc:[dhcpcsvc]
UUID: f1ec59ab-4ca9-4c30-b2d0-54ef1db441b7 Isolation Communication Endpoint
ncalrpc:[LRPC00001d40.00000001]
UUID: f1ec59ab-4ca9-4c30-b2d0-54ef1db441b7 Isolation Communication Endpoint
ncalrpc:[LRPC00001448.00000001]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncalrpc:[OLE4EF57D32A0DB45F9A64653468D7C]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncalrpc:[LRPC000012ac.00000001]
UUID: 2f5f6521-cb55-1059-b446-00df0bce31db Unimodem LRPC Endpoint
ncacn_np:\\\\SERVER[\\pipe\\tapsrv]
UUID: 2f5f6521-cb55-1059-b446-00df0bce31db Unimodem LRPC Endpoint
ncalrpc:[tapsrvlpc]
UUID: 2f5f6521-cb55-1059-b446-00df0bce31db Unimodem LRPC Endpoint
ncalrpc:[unimdmsvc]
UUID: 3473dd4d-2e88-4006-9cba-22570909dd10 WinHttp Auto-Proxy Service
ncalrpc:[W32TIME_ALT]
UUID: 3473dd4d-2e88-4006-9cba-22570909dd10 WinHttp Auto-Proxy Service
ncacn_np:\\\\SERVER[\\PIPE\\W32TIME_ALT]
UUID: 6bffd098-a112-3610-9833-46c3f874532d
ncalrpc:[OLE7C4E3B9B79D8492CBA384F149E08]
UUID: 6bffd098-a112-3610-9833-46c3f874532d
ncacn_ip_tcp:10.0.0.3[1111]
UUID: 6bffd098-a112-3610-9833-46c3f874532d
ncalrpc:[DHCPSERVERLPC]
UUID: 5b821720-f63b-11d0-aad2-00c04fc324db
ncalrpc:[OLE7C4E3B9B79D8492CBA384F149E08]
UUID: 5b821720-f63b-11d0-aad2-00c04fc324db
ncacn_ip_tcp:10.0.0.3[1111]
UUID: 5b821720-f63b-11d0-aad2-00c04fc324db
ncalrpc:[DHCPSERVERLPC]
UUID: 3d267954-eeb7-11d1-b94e-00c04fa3080d
ncalrpc:[LRPC00000480.00000001]
UUID: 3d267954-eeb7-11d1-b94e-00c04fa3080d
ncacn_np:\\\\SERVER[\\pipe\\HydraLsPipe]
UUID: 3d267954-eeb7-11d1-b94e-00c04fa3080d
ncacn_ip_tcp:10.0.0.3[1092]
UUID: 12d4b7c8-77d5-11d1-8c24-00c04fa3080d
ncalrpc:[LRPC00000480.00000001]
UUID: 12d4b7c8-77d5-11d1-8c24-00c04fa3080d
ncacn_np:\\\\SERVER[\\pipe\\HydraLsPipe]
UUID: 12d4b7c8-77d5-11d1-8c24-00c04fa3080d
ncacn_ip_tcp:10.0.0.3[1092]
UUID: 493c451c-155c-11d3-a314-00c04fb16103
ncalrpc:[LRPC00000480.00000001]
UUID: 493c451c-155c-11d3-a314-00c04fb16103
ncacn_np:\\\\SERVER[\\pipe\\HydraLsPipe]
UUID: 493c451c-155c-11d3-a314-00c04fb16103
ncacn_ip_tcp:10.0.0.3[1092]
UUID: 45f52c28-7f9f-101a-b52b-08002b2efabe
ncalrpc:[OLE43978C47C6F54B5499302BAB2F50]
UUID: 45f52c28-7f9f-101a-b52b-08002b2efabe
ncacn_ip_tcp:10.0.0.3[1090]
UUID: 45f52c28-7f9f-101a-b52b-08002b2efabe
ncalrpc:[LRPC00001060.00000001]
UUID: 45f52c28-7f9f-101a-b52b-08002b2efabe
ncacn_np:\\\\SERVER[\\pipe\\WinsPipe]
UUID: 811109bf-a4e1-11d1-ab54-00a0c91e9b45
ncalrpc:[OLE43978C47C6F54B5499302BAB2F50]
UUID: 811109bf-a4e1-11d1-ab54-00a0c91e9b45
ncacn_ip_tcp:10.0.0.3[1090]
UUID: 811109bf-a4e1-11d1-ab54-00a0c91e9b45
ncalrpc:[LRPC00001060.00000001]
UUID: 811109bf-a4e1-11d1-ab54-00a0c91e9b45
ncacn_np:\\\\SERVER[\\pipe\\WinsPipe]
UUID: f5cc59b4-4264-101a-8c59-08002b2f8426 NtFrs Service
ncalrpc:[OLE92F283EA5C2F497093CE6A52B7D8]
UUID: f5cc59b4-4264-101a-8c59-08002b2f8426 NtFrs Service
ncacn_ip_tcp:10.0.0.3[1067]
UUID: f5cc59b4-4264-101a-8c59-08002b2f8426 NtFrs Service
ncalrpc:[LRPC00000d10.00000001]
UUID: d049b186-814f-11d1-9a3c-00c04fc9b232 NtFrs API
ncalrpc:[OLE92F283EA5C2F497093CE6A52B7D8]
UUID: d049b186-814f-11d1-9a3c-00c04fc9b232 NtFrs API
ncacn_ip_tcp:10.0.0.3[1067]
UUID: d049b186-814f-11d1-9a3c-00c04fc9b232 NtFrs API
ncalrpc:[LRPC00000d10.00000001]
UUID: a00c021c-2be2-11d2-b678-0000f87a8f8e PERFMON SERVICE
ncalrpc:[OLE92F283EA5C2F497093CE6A52B7D8]
UUID: a00c021c-2be2-11d2-b678-0000f87a8f8e PERFMON SERVICE
ncacn_ip_tcp:10.0.0.3[1067]
UUID: a00c021c-2be2-11d2-b678-0000f87a8f8e PERFMON SERVICE
ncalrpc:[LRPC00000d10.00000001]
UUID: 50abc2a4-574d-40b3-9d66-ee4fd5fba076
ncacn_ip_tcp:10.0.0.3[1048]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncalrpc:[LRPC000004d4.00000001]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncacn_ip_tcp:10.0.0.3[1032]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncalrpc:[LRPC000004d4.00000001]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncacn_ip_tcp:10.0.0.3[1032]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncalrpc:[LRPC000004d4.00000001]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncacn_ip_tcp:10.0.0.3[1032]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncalrpc:[LRPC000004d4.00000001]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncacn_ip_tcp:10.0.0.3[1032]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncalrpc:[audit]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncalrpc:[securityevent]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncalrpc:[protected_storage]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncalrpc:[dsrole]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncacn_ip_tcp:10.0.0.3[1026]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncalrpc:[NTDS_LPC]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncacn_http:10.0.0.3[1027]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncalrpc:[audit]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncalrpc:[securityevent]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncalrpc:[protected_storage]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncalrpc:[dsrole]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncacn_ip_tcp:10.0.0.3[1026]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncalrpc:[NTDS_LPC]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncacn_http:10.0.0.3[1027]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncalrpc:[audit]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncalrpc:[securityevent]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncalrpc:[protected_storage]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncalrpc:[dsrole]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncacn_ip_tcp:10.0.0.3[1026]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncalrpc:[NTDS_LPC]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncacn_http:10.0.0.3[1027]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncalrpc:[audit]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncalrpc:[securityevent]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncalrpc:[protected_storage]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncalrpc:[dsrole]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncacn_ip_tcp:10.0.0.3[1026]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncalrpc:[NTDS_LPC]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncacn_http:10.0.0.3[1027]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncalrpc:[audit]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncalrpc:[securityevent]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncalrpc:[protected_storage]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncalrpc:[dsrole]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncacn_ip_tcp:10.0.0.3[1026]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncalrpc:[NTDS_LPC]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncacn_http:10.0.0.3[1027]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncalrpc:[audit]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncalrpc:[securityevent]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncalrpc:[protected_storage]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncalrpc:[dsrole]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncacn_ip_tcp:10.0.0.3[1026]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncalrpc:[NTDS_LPC]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncacn_http:10.0.0.3[1027]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncalrpc:[audit]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncalrpc:[securityevent]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncalrpc:[protected_storage]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncalrpc:[dsrole]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncacn_ip_tcp:10.0.0.3[1026]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncalrpc:[NTDS_LPC]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncacn_http:10.0.0.3[1027]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncalrpc:[OLE8B33809919104CE5B44970B01637]
UUID: 1ff70682-0a51-30e8-076d-740be8cee98b
ncalrpc:[wzcsvc]
UUID: 1ff70682-0a51-30e8-076d-740be8cee98b
ncalrpc:[OLE396AE4FBEFCC4DD2B44D0F0A3691]
UUID: 1ff70682-0a51-30e8-076d-740be8cee98b
ncacn_np:\\\\SERVER[\\PIPE\\atsvc]
UUID: 378e52b0-c0a9-11cf-822d-00aa0051e40f
ncalrpc:[wzcsvc]
UUID: 378e52b0-c0a9-11cf-822d-00aa0051e40f
ncalrpc:[OLE396AE4FBEFCC4DD2B44D0F0A3691]
UUID: 378e52b0-c0a9-11cf-822d-00aa0051e40f
ncacn_np:\\\\SERVER[\\PIPE\\atsvc]
UUID: 0a74ef1c-41a4-4e06-83ae-dc74fb1cdd53
ncalrpc:[wzcsvc]
UUID: 0a74ef1c-41a4-4e06-83ae-dc74fb1cdd53
ncalrpc:[OLE396AE4FBEFCC4DD2B44D0F0A3691]
UUID: 0a74ef1c-41a4-4e06-83ae-dc74fb1cdd53
ncacn_np:\\\\SERVER[\\PIPE\\atsvc]
UUID: 3c4728c5-f0ab-448b-bda1-6ce01eb0a6d5 DHCP Client LRPC Endpoint
ncalrpc:[DNSResolver]
Total endpoints found: 125
==== End of RPC Endpoint Mapper query response ====
portqry.exe -n server.apl.local -e 135 -p TCP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 389 -p BOTH ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 389 (ldap service): LISTENING
Using ephemeral source port
Sending LDAP query to TCP port 389...
LDAP query response:
currentdate: 01/28/2013 14:11:54 (unadjusted GMT)
subschemaSubentry: CN=Aggregate,CN=Schema,CN=Configuration,DC=apl,DC=local
dsServiceName: CN=NTDS Settings,CN=SERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=apl,DC=local
namingContexts: DC=apl,DC=local
defaultNamingContext: DC=apl,DC=local
schemaNamingContext: CN=Schema,CN=Configuration,DC=apl,DC=local
configurationNamingContext: CN=Configuration,DC=apl,DC=local
rootDomainNamingContext: DC=apl,DC=local
supportedControl: 1.2.840.113556.1.4.319
supportedLDAPVersion: 3
supportedLDAPPolicies: MaxPoolThreads
highestCommittedUSN: 1310788
supportedSASLMechanisms: GSSAPI
dnsHostName: SERVER.apl.local
ldapServiceName: apl.local:[email protected]
serverName: CN=SERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=apl,DC=local
supportedCapabilities: 1.2.840.113556.1.4.800
isSynchronized: TRUE
isGlobalCatalogReady: TRUE
domainFunctionality: 2
forestFunctionality: 2
domainControllerFunctionality: 2
======== End of LDAP query response ========
UDP port 389 (unknown service): LISTENING or FILTERED
Using ephemeral source port
Sending LDAP query to UDP port 389...
LDAP query response:
currentdate: 01/28/2013 14:11:57 (unadjusted GMT)
subschemaSubentry: CN=Aggregate,CN=Schema,CN=Configuration,DC=apl,DC=local
dsServiceName: CN=NTDS Settings,CN=SERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=apl,DC=local
namingContexts: DC=apl,DC=local
defaultNamingContext: DC=apl,DC=local
schemaNamingContext: CN=Schema,CN=Configuration,DC=apl,DC=local
configurationNamingContext: CN=Configuration,DC=apl,DC=local
rootDomainNamingContext: DC=apl,DC=local
supportedControl: 1.2.840.113556.1.4.319
supportedLDAPVersion: 3
supportedLDAPPolicies: MaxPoolThreads
highestCommittedUSN: 1310788
supportedSASLMechanisms: GSSAPI
dnsHostName: SERVER.apl.local
ldapServiceName: apl.local:[email protected]
serverName: CN=SERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=apl,DC=local
supportedCapabilities: 1.2.840.113556.1.4.800
isSynchronized: TRUE
isGlobalCatalogReady: TRUE
domainFunctionality: 2
forestFunctionality: 2
domainControllerFunctionality: 2
======== End of LDAP query response ========
UDP port 389 is LISTENING
portqry.exe -n server.apl.local -e 389 -p BOTH exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 636 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 636 (ldaps service): LISTENING
portqry.exe -n server.apl.local -e 636 -p TCP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 3268 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 3268 (msft-gc service): LISTENING
Using ephemeral source port
Sending LDAP query to TCP port 3268...
LDAP query response:
currentdate: 01/28/2013 14:11:57 (unadjusted GMT)
subschemaSubentry: CN=Aggregate,CN=Schema,CN=Configuration,DC=apl,DC=local
dsServiceName: CN=NTDS Settings,CN=SERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=apl,DC=local
namingContexts: DC=apl,DC=local
defaultNamingContext: DC=apl,DC=local
schemaNamingContext: CN=Schema,CN=Configuration,DC=apl,DC=local
configurationNamingContext: CN=Configuration,DC=apl,DC=local
rootDomainNamingContext: DC=apl,DC=local
supportedControl: 1.2.840.113556.1.4.319
supportedLDAPVersion: 3
supportedLDAPPolicies: MaxPoolThreads
highestCommittedUSN: 1310788
supportedSASLMechanisms: GSSAPI
dnsHostName: SERVER.apl.local
ldapServiceName: apl.local:[email protected]
serverName: CN=SERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=apl,DC=local
supportedCapabilities: 1.2.840.113556.1.4.800
isSynchronized: TRUE
isGlobalCatalogReady: TRUE
domainFunctionality: 2
forestFunctionality: 2
domainControllerFunctionality: 2
======== End of LDAP query response ========
portqry.exe -n server.apl.local -e 3268 -p TCP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 3269 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 3269 (msft-gc-ssl service): LISTENING
portqry.exe -n server.apl.local -e 3269 -p TCP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 53 -p BOTH ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 53 (domain service): LISTENING
UDP port 53 (domain service): LISTENING
portqry.exe -n server.apl.local -e 53 -p BOTH exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 88 -p BOTH ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 88 (kerberos service): LISTENING
UDP port 88 (kerberos service): LISTENING or FILTERED
portqry.exe -n server.apl.local -e 88 -p BOTH exits with return code 0x00000002.
=============================================
Starting portqry.exe -n server.apl.local -e 445 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 445 (microsoft-ds service): LISTENING
portqry.exe -n server.apl.local -e 445 -p TCP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 137 -p UDP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
UDP port 137 (netbios-ns service): LISTENING or FILTERED
Using ephemeral source port
Attempting NETBIOS adapter status query to UDP port 137...
Server's response: MAC address 000423c733ec
UDP port: LISTENING
portqry.exe -n server.apl.local -e 137 -p UDP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 138 -p UDP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
UDP port 138 (netbios-dgm service): LISTENING or FILTERED
portqry.exe -n server.apl.local -e 138 -p UDP exits with return code 0x00000002.
=============================================
Starting portqry.exe -n server.apl.local -e 139 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 139 (netbios-ssn service): LISTENING
portqry.exe -n server.apl.local -e 139 -p TCP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 42 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 42 (nameserver service): LISTENING
portqry.exe -n server.apl.local -e 42 -p TCP exits with return code 0x00000000.
Jason.
Consultant | Nerd | Visionary. http://www.ethertech.com.au/ | http://www.deeperstates.com.au

Problems after print server migration to Windows Server 2008 R2

Hi all,
New forum member, first time poster. I am at my wits end and have concussion from banging my head on the desk for several days running. Hopefully someone here may be able to help.
Environment
I have recently moved our printing environment from a Windows Server 2003 machine to a new Server 2008 R2 machine in prep for rolling out Windows 7 x64 clients. We have 30-40 printers, majority of which are HP's (M2727's, P4015dn's, CM3530's, P2035's & a CM8060).
My procedure for setting up the printers on the new server involved manually creating each printer and using up-to-date drivers, we wanted to start fresh. The HP's are all using the HP Universal PCL 5 or PCL 6 (61.115.1.10527) x86 & x64 driver. We use Desktop Authority on logon to install the required printers for each client.
Problems
Since everyone is now running through the 2008 R2 server we have had a bunch of intermittent problems pop up all over the place, mostly with our HP printers. When using the PCL6 driver some applications print a page or 10 of garbled gibberish (wingdings etc), so most printers are now using the PCL5 driver. Other applications print the error "PCL XL error" when using PCL6. Sometimes reinstalling the printer on the client machine will resolve these errors, however they tend to resurface.
When we use the PCL5 driver our M2727's intermittently report "Out Of Memory" on the printer display (they are stock with 64M RAM each) - upgrading the RAM may fix this but we never had this problem before on the 2003 server. This problem is not specific to the size of the printed document - it could be a 20 page report or a 2 page excel document. Resetting the printer will generally clear this issue temporarily. This is currently our most annoying/biggest issue.
Some people are having issues printing to a FujiXerox 340A-AP printer - in particular 1 person is able to print fine, where as another prints and the print margin appears to be far too small. After confirming all print margins on the server then reinstalling the printer on the client machine, the problem still persists. We have two FujiXerox printers, the second one is working as intended for 8-10 users with the exact same settings.
Attempted Fixes
These are some of the attempted fixes that I have tried:
Turning it off and on
Upgrading the firmware on the M2727's to resolve garbled printing & out of memory
Upgrading the firmware on the CM3530's to resolve garbled printing
Reinstalling all HP Universal PCL5/PCL6 x86 & x64 drivers on the print server
Ensuring that the 2008 R2 server is 100% up-to-date with MS patches
Backing up all printers on print server, removing the print server role, deleting all printers & drivers, rebooting, reinstalling the print server role and restoring all printers from backup
Upgraded Desktop Authority to the latest version - as this application is in charge of installing the printers on logon
As you can see we are having a lot of problems and nothing seems to make any sense. None of this happened before Windows Server 2008 R2 was brought in to the equation.
If anyone is able to provide any assistance that would be greatly appreciated.
Many thanks,
Hartz.
tldr; our printers are screwed since migrating to Windows Server 2008 R2.

Hi all,
New forum member, first time poster. I am at my wits end and have concussion from banging my head on the desk for several days running. Hopefully someone here may be able to help.
Environment
I have recently moved our printing environment from a Windows Server 2003 machine to a new Server 2008 R2 machine in prep for rolling out Windows 7 x64 clients. We have 30-40 printers, majority of which are HP's (M2727's, P4015dn's, CM3530's, P2035's & a CM8060).
My procedure for setting up the printers on the new server involved manually creating each printer and using up-to-date drivers, we wanted to start fresh. The HP's are all using the HP Universal PCL 5 or PCL 6 (61.115.1.10527) x86 & x64 driver. We use Desktop Authority on logon to install the required printers for each client.
Problems
Since everyone is now running through the 2008 R2 server we have had a bunch of intermittent problems pop up all over the place, mostly with our HP printers. When using the PCL6 driver some applications print a page or 10 of garbled gibberish (wingdings etc), so most printers are now using the PCL5 driver. Other applications print the error "PCL XL error" when using PCL6. Sometimes reinstalling the printer on the client machine will resolve these errors, however they tend to resurface.
When we use the PCL5 driver our M2727's intermittently report "Out Of Memory" on the printer display (they are stock with 64M RAM each) - upgrading the RAM may fix this but we never had this problem before on the 2003 server. This problem is not specific to the size of the printed document - it could be a 20 page report or a 2 page excel document. Resetting the printer will generally clear this issue temporarily. This is currently our most annoying/biggest issue.
Some people are having issues printing to a FujiXerox 340A-AP printer - in particular 1 person is able to print fine, where as another prints and the print margin appears to be far too small. After confirming all print margins on the server then reinstalling the printer on the client machine, the problem still persists. We have two FujiXerox printers, the second one is working as intended for 8-10 users with the exact same settings.
Attempted Fixes
These are some of the attempted fixes that I have tried:
Turning it off and on
Upgrading the firmware on the M2727's to resolve garbled printing & out of memory
Upgrading the firmware on the CM3530's to resolve garbled printing
Reinstalling all HP Universal PCL5/PCL6 x86 & x64 drivers on the print server
Ensuring that the 2008 R2 server is 100% up-to-date with MS patches
Backing up all printers on print server, removing the print server role, deleting all printers & drivers, rebooting, reinstalling the print server role and restoring all printers from backup
Upgraded Desktop Authority to the latest version - as this application is in charge of installing the printers on logon
As you can see we are having a lot of problems and nothing seems to make any sense. None of this happened before Windows Server 2008 R2 was brought in to the equation.
If anyone is able to provide any assistance that would be greatly appreciated.
Many thanks,
Hartz.
tldr; our printers are screwed since migrating to Windows Server 2008 R2.

I am having problems with migration assistant (windows pc to Mac 2011) When I get to the 'Quit other applications' box and click continue, nothing happens. There are no other apps running - any ideas, please?

I am having probems with migration assistant. Trying to transfer data from a windows laptop to iMac 2011. It was working fine when I did the set-up yesterday, but it was going to take hours to transfer some videos so I quit the process with the intention of doing it again at a later stage. However today I find that everytime I get to the 'Quit other applications' box on the Mac and click 'continue', nothing happens. Have checked mission control and confirmed no other apps running. Tried several times with the same result every time. Migration Assistant running on my laptop with the 'Waiting for mac to connect' box displayed. Mac is connected to wi-fi OK as able to use Safari and access internet. Any ideas, please?

Thanks for your suggestions. Have managed to get Migration Assistant working but now have a new problem, i.e. where does it save the transferred files?!! Searched a few forums and it seems it saves it under your old username, or suchlike. Anyway I tried logging on as a new user using my old user name but there were only a handful of files there, couldn't locate the majority of stuff from my old laptop. Anyway I don't intend to go through any more hoops with MA - will just save the important stuff to an external drive and transfer it that way. Not impressed with MA at all. I thought it was supposed to be a user-friendly tool to simplify the transfer from pc to Mac - not my experience, I'm afraid!

Since migrating from Windows 7 to Windows 8 and upgrading to iTunes 11, the latter has frozen while syncing my devices, usually while at the "determining apps to sync" stage of the process. If I am attempting to download app updates before attempting to

Since migrating from Windows 7 to Windows 8 and upgrading to iTunes 11, the latter has frozen while syncing my devices, usually while at the “determining apps to sync” stage of the process. If I am attempting to download app updates before attempting to sync, the problem normally occurs at the first “installing app x” stage. In addition, the whole iTunes experience is extremely sluggish and will even freeze while searching for a track. Everything worked fine on Windows 7. So far, I have repaired the program several times and have checked for compatibility issues, but there is no Windows 8 option in the combo box, obtained after right-clicking the icon and selecting Properties/Compatibility. As a result, I am unable to sync my devices. If I uninstall iTunes before re-installing, will this affect my iTunes libraries? Does anyone have any suggestions?

After going by elimination to isolate if the problem was from (1) iTunes app, (2) my computer or (3) my old iPhone 4G, I figured out what my problem was.
1) First I deleted & reinstalled iTunes on my Windows PC without succes, my playlist did not changed on my iPhone.
2) I tested a successful #sync from the iMac at work.
So my conclusion is: The hard drive on my Windows PC is full and that is affecting iTunes SYNC functionalities.
So I'll do a back-up then run a "Clean Install" of my Windows OS, hoping that it will fix my SYNC problems.

Migrating from Windows Photoshop Elements to iPhoto '08

I recently got a Mac and I'm looking into migrating from Windows Photoshop Elements 6.0 to iPhoto 7 ('08).
I've seached this forum, but I didn't find any detailed tips, tricks and recommendations on how to do the migration. I know about the PE (Photoshop Elements) command to write keyword information into the files (something like File->write tags to file). Someone (IIRC Barbara B.) also mentioned something about scripts to make the transition smoother, although I haven't seen any detailed information on what and where these scripts are. Basically, I'd like to hear from users who have migrated from Windows Photoshop Elements. I have thousands of pictures and prior planning can save me lots of time.
Some questions:
1. Photoshop Elements has a tagging feature, which is similar to iPhoto's keyword feature. Not sure how iPhoto will process the keywords. Do I just import the pictures into iPhoto and iPhoto will recognize the keywords? Should I create the keywords in iPhoto ahead of time prior to import (using names that exactly match Photoshop tag names) ?
2. In PE, I've assigned captions to pictures. Can iPhoto read the captions and treat them as titles or descriptions?
3. In PE, I've assigned ratings to pictures. Can iPhoto read them, or do I need to manually redo the ratings in iPhoto?
4. One PE feature that I will really miss is hierarchical tags (e.g. Family->Kid's name). (Aside: everyone, please put in a request to Apple to support this feature!!) While I would prefer a native iPhoto feature to support hierarchical tags, I saw that there are 3rd party plugins available. What's the best one in terms of features and long term support/viability? Is it Keyword Manager?
5. Any easy way to translate my PE Album definitions when migrating to iPhoto? I assume I would need to recreate them from scratch based on keywords and optionally ratings?
6. I'm afraid to ask this next question (and I'm sure this is worthy of many separate threads). I'm still grappling with the concept of Events. In my mind, an event is something "monumental", and I've used Albums in PE for these "monumenal" events. A large percentage of my pictures don't really fit into a "monumental event" categary. Instead, they are pictures that were taken in a random/candid manner. Or, I might have pictures that are truly events, but maybe only 1 or 2 pictures would fit into an event. If I started using iPhoto from the very beginning, it may be easier to deal with the concept of events. However, I already have thousands of pictures. I'm wary of importing all my pictures in one shot (rather than on a per "event" basis), since it may result in hundreds of events, which, IMO, wouldn't provide much organizational value. Anyone have any tips/philosophical opinions on how to deal with events when thousands of pictures need to be imported? Someone (T.D.?) mentioned they organize by year for older pictures. Any suggestions?
Thanks!

randman
Can't answer all your questions, but I'll have a go at a couple.
1. Photoshop Elements has a tagging feature, which is similar to iPhoto's keyword feature. Not sure how iPhoto will process the keywords. Do I just import the pictures into iPhoto and iPhoto will recognize the keywords? Should I create the keywords in iPhoto ahead of time prior to import (using names that exactly match Photoshop tag names) ?
If you write the tags to the file then iPhoto will recognise them as part of the IPTC data. There is no way to create tags in advance.
2. In PE, I've assigned captions to pictures. Can iPhoto read the captions and treat them as titles or descriptions?
Can Elements write these to the IPTC data? If so, iPhoto should read them. A little trial will confirm.
3. In PE, I've assigned ratings to pictures. Can iPhoto read them, or do I need to manually redo the ratings in iPhoto?
No, the IPTC data does not recognise ratings.
4. One PE feature that I will really miss is hierarchical tags (e.g. Family->Kid's name). (Aside: everyone, please put in a request to Apple to support this feature!!) While I would prefer a native iPhoto feature to support hierarchical tags, I saw that there are 3rd party plugins available. What's the best one in terms of features and long term support/viability? Is it Keyword Manager?
Keyword Manager is the way to do this.
5. Any easy way to translate my PE Album definitions when migrating to iPhoto? I assume I would need to recreate them from scratch based on keywords and optionally ratings?
What do you mean by "album definitions"?
About Events:
Don't get hung up on a word. They could have as easily called them 'trousers' and it would make almost as much sense
An 'Event' is an import that is automatically divided into folders depending on the criteria you set in the iPhoto Preferences.
Events in the iPhoto Window correspond exactly with the Folders in the Originals Folder in the iPhoto Library package file (Right click on it in the Pictures Folder -> Show Package Contents).
You can move photos between Events, you can rename Events, edit them, create them, as long as you do it via the iPhoto Window. Check out the Info Pane (wee 'i', lower left) the name and date fields are editable. Edit a Event Name using the Info Pane, the Event Folder in iPhoto Library/Originals will also have the new name.
So, really an Event is a Folder.
For my money, Events are a very limited way of organising photos. They are strictly date and time based. As time goes by I consolidate them - Spring 06, Summer 07, America 08 (I do this as we have three cameras feeding the Library).
I organise using Albums, Smart Albums and Keywords.
Albums (Smart or otherwise) are virtual entities. Unlike Events, they reference files on the HD, so a pic can be in 1,10 or 100 Albums with no extra disk space used. (To have a pic in two events requires two copies of the files.) They are infinitely flexible and offer a much richer set of possibilities.
How have you your photos organised currently? In folders? On what basis? If you can explain how that works we may be able to help you recreate this system in iPhoto.
Regards
TD

Outlook connection status window explained

(this may be an already discussed topic, in that case feel free to answer with a hyperlink to another technet forum topic)
Dear all,
I am looking for a technet blog post, that explains all the tiny little details of the "Connection status" window, that is accessible if I CTRL+right click on the Outlook 2010 tray bar. I would like to receive some very professional and at
least Level 300 explanation of all the possible information visible in this troubleshooting window. Unfortunately there are hundreds of hits for this search term, I find it nearly impossible to find that single article that is right for me.
Richard
PS: I think my question wasnt posted in the best topic, I would like to ask an admin to move it into the proper category under Exchange server

Servername: pretty obvious :)
Type:
Directory => what is the server providding the answer to DSQUERY command / rpc proxy for authentification (therefore it is normal to see your exchange server when using outlook anywhere if you would use a direct mapi connection the "real"
DC/GC name would show). This one is normally there twice , once for GC once for DC.
Mail => you mailbox store server
Public folder => if you still have a public folder store, that will identify what is the PF you are connected to.
Interface: the local network interface used for the connection so either your wired connection or the wireless card
Conn: HTTPS or MAPI, if you are using Exchange 2013 you will always see HTTPS. for older version, MAPI can only be on the local network.
Status: current status of the connection type, you will see that changing if you start outlook /rpcdiag from at home.
req/fail: number of current request/number of current request failed
Avg Resp: delay of response (in ms) can be usefull to troubleshoot for long request (with exmon) or network bottleneck
Authn: NTLM, KERBEROS, certificate etc...
from the complet article about the change of outlook connectivity, here is also the explanation to the field that were not in previous outlook version (http://blogs.technet.com/b/exchange/archive/2014/05/09/outlook-connectivity-with-mapi-over-http.aspx):
Field
Value
Protocol
HTTP (v/s RPC/HTTP for Outlook Anywhere)
Proxy Server
Empty
Server name
Actual server name (v/s GUID for Outlook Anywhere connections)
I hope that answer your question, however nowadays aside to check the current connection status of the client, you will get more usefull troubleshooting info from the exchange logs.
Regards,
Eric
Please“Vote As Helpful”if you find my contribution useful or “MarkAs Answer” if it does answer your question.
That will encourage me - and others - to take time out to help you.

Migrating From Window Server 2003 to Window Server 2012 for Web server deployment and Developmemt Machine is on Window Server 2008

Hi Microsoft Team,
We need your urgent advice and that is also on priority:
Issue Description: We need to migrate from
WINDOW SERVER 2003 to WINDOW SERVER 2012 while the development activity will be carried
under WINDOW SERVER 2008 as DEVELOPMENT BOX.
.NET Framework Version: 3.5 ( For both DEVLOPMENT(WINDOW SERVER 2008) and WEBSERVER(to WINDOW SERVER 2012))
IIS Version: 7.5 (For both DEVLOPMENT(WINDOW SERVER 2008) and WEBSERVER(to WINDOW SERVER 2012))
Need your quick advice Is that configuration feasible for Development and
Deployment (Web Server).
Highly appreciate your response as this will depend which product we need to buy also if you feel any showstopper or concern. Please let us know.

Hi,
As suggested by Tim, in order to get better assistance, we can ask for help in the following IIS forum.
IIS Forum
http://forums.iis.net/
In addition, regarding migrating from Windows Server 2003 to Windows Server 2012, the following blog can be referred to for more information.
Step-By-Step: Active Directory Migration from Windows Server 2003 to Windows Server 2012
http://blogs.technet.com/b/canitpro/archive/2013/05/27/step-by-step-active-directory-migration-from-windows-server-2003-to-windows-server-2012.aspx
Best regards,
Frank Shen

Migration of windows 2008 std 32bit DC to windows 2012 std

i have 32bit DC in my local environment having schema ver 44.. now i hav another server and want to migrate to windows 2012 std edition.. can some one guide me how to achieve this task?

Hi Babarmunir,
In-place upgrades from 32-bit to 64-bit architectures are not supported. All editions of Windows Server 2012 are 64-bit only.
Domain controllers that run 64-bit versions of Windows Server 2008 or Windows Server 2008 R2 can be upgraded to Windows Server 2012. You cannot upgrade domain controllers that run Windows Server 2003 or 32-bit versions of Windows Server 2008. To replace
them, install domain controllers that run a later version of Windows Server in the domain, and then remove the domain controllers that Windows Server 2003.
Hence you need to have a fresh x64 machine which you can join to domain and install ADDS Role then promote as additional domain controller.
Provided the Forest Functional Level is Windows Server 2003 at minimum.
Upgrading previous retail versions of Windows Server to Windows Server 2012:
http://technet.microsoft.com/en-in/library/jj574204.aspx
Upgrade Domain Controllers to Windows Server 2012 R2 and Windows Server 2012
Use the below guide to setup the ADC:
Step-By-Step: Adding a Windows Server 2012 Domain Controller
System requirements for Windows Server 2012 are unchanged from Windows Server 2008 R2. For more information, seeWindows Server 2008 R2 with SP1 System Requirements (http://www.microsoft.com/windowsserver2008/en/us/system-requirements.aspx).
The Schema and Domain preparation: One could run
Adprep prior to ADDS Role installation, Regardless, if Adprep is not detected, it will automatically be completed on your behalf.
Regards,
Satyajit
Please“Vote As Helpful”
if you find my contribution useful or “MarkAs Answer” if it does answer your question. That will encourage me - and others - to take time out to help you.

Migration from Windows Small Business Server 2003 to Snow Leopard Server

Hello,
I'm going to migrate a Windows Small Business Server 2003 Standard to a Mac Mini Snow Leopard Server 10.6.x in a few weeks.
I have 2 questions :
Is there an official process to migrate my Exchange server datas ?
Snow Leopard Server has it Wizards to help me to muigrate datas to proper services ?
Thanx
Regards,
Gil DERENNE aka --( dB )--

Thank you for your reply
My network will be Apple only in a few time (1 server, 1 iMac and 1 Mac Pro).
Now, I want to replace server and all services installed on it :
- Active Directory (replaced by Open Directory)
- Users/Groups/machines
- NAT/Firewall and Backup (will be replaced by a Time Capsule)
- VPN for mobile access
- File and Printer sharing
- Fax Services with Fax/Modem 56K !oops! (replaced by a free service offer by my ISP)
- Mail/Calendar/Address book and notes with Exchange (replaced by each service to serv right thing : Mail, iCal, Address book...).
I know what to do with all things but not for replacing Exchange and transfer datas to each similar service in Snow Leopard.
In the network, Mail Server will be used by Outlook with IMAP protocol and other services by web interface (Windows computers are not a problem for me, it can be alone and only access web if necessary).
The number of clients inside the LAN :
- 2 iPhones
- 1 iPod Touch
- 1 PC Windows Vista (for a few time) with some VM (Linux and Windows)
- 1 iMac 27' with 1 VM (Windows)
- 1 LAN Printer HP Deskjet 6127 (RJ45 Static IP connection)
The number of clients outside the LAN :
- 3 PC Windows XP
- 2 PC Windows Vista
- 5 Nokia Smart Phones
When I'm going to by the Mac Mini Server with Snow Leopard Server, is there some support to help me to do it whith them and is it free or do I have to buy AppleCare to access to this service ?

Time in migration status window is incorrect

Similar Messages

Maybe you are looking for