Time in Network Header

Hi all,
How can i have basic start TIME and Basic finish TIME for Network header? In Plant maintance SAP has provided these fields in Service order header, but these fields are not available in Networks though technically SO and network are the same. Was it made purposefully. I need these fields in Networks very desperatly,
Regards,
Pavalavel.

Hi all,
My requirement is complicated... Ok you ask for it...
I need to copy dates and times from one network activity to another network header and schedule the second network based on the dates and times received from the first network activity. This is done through an enhancement. When i am not able to copy time, the second network gets scheduled taking time as 00:00:00 start time. If the time in first network activity is say 23:00:00. My deviation would be 23 hours in the second network, this is an unacceptable deviation in a shop floor.
Note : The second network cannot be a sub network of first network activity. Because i have a functionality called as MEB(maintainance event builder working there). The volume of this copying dates functionality is very huge, if i had this as a std functionality(through BAPI NETWORK MAINTAIN)... It would save lot of system resource...For your info this is not a new requirement... It is available in PM service orders and PP orders...if you are aware of scheduling types pls check it....
for any info contact me at [email protected]
Regards,
Pavalavel.
Edited by: Pavalavel Kanagavel on Mar 12, 2008 2:21 PM

Similar Messages

How to join between network head and activity in DB

hi expert:
Network head store in a table named AUFK, Activity store in a table named AFVC. How to join this two table.
because there are no foreign key in this two table. It spend my much time. but have not find it.
thank you

Hi,
Table AFKO provides the link.
Input AUFNR-AUFK to AUFNR-AFKO to get AUFPL. Input this AUFPL in AFVC.
Regards

PROJECT PROGRESS ANALYSIS FOR NETWORK HEADER

< MODERATOR: Message locked. Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. >
Dear all,
We can get the progress analysis data (tcode CNE5) for a network activity and also for WBS element. However data is not cumulated at the network header. Need your urgent help for getting this at the network header level. Is there a workaround like user exit for doing this?
Also let me know available user exists for PS. Please guide me how to find an user exit for PS in particular.
Regards,
Prakash.

arenk03 wrote:
> Is there any possibility to assign progress versions to network activitys automatically when creating a new network activity?
No , it is not possible.
Please search the forum for further details, as it discussed many times earlier.

Different user status profile for network header and activities

Hi everyone!
Is there any way to define different user status profile at network header level and at network activity level? As far as I know, it is only possible to enter a user profile at network type level, and both netwok headers and activities use the same statuses. Does it work this way?
Thanks!
Regards.
Edited by: Thalos on Jul 2, 2011 12:27 AM

Hi Punith, Hi abdul!
Thanks for the reply!
I've gone through the OPSC, but the thing is that here you define a user status profile at network plant level. But I need to define it at network activity level.
The reason why I need this is because we have types of activities. We use network activities for client activities, for internal activities, to identify and follow-up risk management, etc. Each group of activities -since they have different usages- has different user status associated. But as I don't have any way to assign different user status profiles, all the activities have the same statuses, although they will only use some of them.
Thanks!
Regards,
Thalos.

MSPT/MACM status at network header - Missing Parts

I have a query with regards to how the MSPT(missing parts) status is set/unset at the network header level.
My question is why is the Missing Part status set to INACTIVE at the Network Header level when several components have the Missing Part indicator set.
The MACM status is set as ACTIVE instead at the network header level.

Dear Chandra shekar,
check for the production order type and plant combination in OPJK for business function 1 - material availability check during order
creation for the check box - check material availability during order creation and likewise for business function 2 - material
availability during order release and the setting for release material .
Kindly make the required setting after discussing with your PP consultant and go ahead.
Regards
Mangalraj.S

Hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear a

hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear adsl.i have a second imac upstairs which connects to time capsule wifi network (it is within range as it is directly abobe on 1st floor)
could you tell me how best to set airport express up to extend my wifi range?

Greetings,
This is called an "Extended wireless network".
Read this article for details and steps on how to extend your TimeCapsule's network:
http://support.apple.com/kb/HT4259
Cheers.

How to print from windows 7 pc on time capsule network?

I added a new pc with windows 7 on my time capsule network. Existing network includes 2 macbook pros and 1 mac mini with boot camp and windows xp. I have been using the windows xp with bootcamp on the mac mini and printing from it for a couple years. We don't share files between the notebooks and mac mini, just internet access and printing. My bootcamp side got too full which is why I added the new windows pc (yuk) for my windows programs but I cannot figure out how to get the windows pc to recognize my printer connected to airport time capsule. I installed the printer software and drivers and connected it with usb and printed but when I connect the printer back to time capsule the pc doesn't see it. Also, I downloaded bonjour from apple site but still no go. Any help is appreciated. As you can probably tell, I only know enough to be dangerous. That's why I love my Macs, they just work!

The problem is you loaded the printer directly and now do not have it plugged in.. so delete the printer in the control panel.. then setup the printer again.. this time connect to it as network printer. The bonjour should make it available as a network resource..
Tell me if you still run into trouble doing that. You may need to load the IP of the TC manually..
Window7 has higher security level than xp.. and that can sometimes also cause issues.
Are you using SMB compliant names for the TC, wireless and printer??
Can the windows 7 computer get internet via the TC? Can you ping it?
Look up how to reduce the security level in windows to match xp.. I don't remember the details but you have to do some nifty footwork.

Computers on my secured time capsule network? How did they get on?

When I look at my Time Capsule network, I see two computers connected to it as well as myself: workgroup and macbook c66e5 (or something like that). I have Uverse and the TC has made its own network in bridge mode. I have also set up a WPA2 Personal password. The password is 19 characters long so I know it is very secure, yet somehow these two computers are on the network. What's weird, is that I cannot see these computers or my own computer on the network from my brother's mac, yet I can see him. Also, on my uverse network, I never see these other computers in the finder. Do I have a security problem or is this normal? Thanks in advance for your help!
Kyle

I suppose access to the log is yet another thing apple removed from their toyland version 6 airport utility.. if so you will need to install 5.6.. which is a bit tricky but can be done.
Download the real utility.. not available for ML so the lion version.
http://support.apple.com/kb/DL1482
Open the DMG file to see the pkg file but do not proceed further.
Download install and run unpkg.
http://www.timdoug.com/unpkg/
Drag the pkg file of airport 5.6 utility over unpkg.. it will unpack it to the desktop in a directory.. AirPortUtility56, drill down, applications, utilities and you will find the actual utility.. drag it to your utilies directory. Now you have a REAL TOOL not a TOY.. Log is under advanced.
Then you will know what is happening instead of living in the darkness.

Can I add a NAS via ethernet to the Time Capsule network?

"I'm a PC," but am sick of spending all my time with Windows/Network conflicts and am getting ready to take the plunge into the Mac world (insert applause here).
My router/switch is old, and I want "n" wireless capability, so my plan here is to go whole hog and buy a Macbook Pro, an iMac, and a brand new network infrastructure including the 2TB Time Capsule. This way I will stay completely within the Apple family.
I have a Netgear ReadyNAS 2TB that I would like to have available as a second back-up drive on the network. It can only be on the network via ethernet (LAN). It cannot be plugged into the Time Capsule's USB port.
Will I be able to add this drive and get Time Capsule (and even Time Machine) to "play nice" with it? Can I even set the Time Machine on each computer to back up to this drive?
Or should I just sell the ReadyNAS and get a USB drive that will work with the time capsule?
Finally, there are only 3 ethernet ports on the TC. Can I add a switch?
Thanks for any help anyone can offer,
Shawn

BroncoCountry wrote:
Will I be able to add this [NAS] drive and get Time Capsule (and even Time Machine) to "play nice" with it? Can I even set the Time Machine on each computer to back up to this drive?
It's reasonable to expect your NAS drive to work when connected to your Time Capsule network. However, it will be difficult for you to use it for Time Machine backups. Apple only supports Time Machine network backups to the disk in a Time Capsule.
It's easy to have multiple computers backing up via Time Machine to the same Time Capsule.
Or should I just sell the ReadyNAS and get a USB drive that will work with the time capsule?
That's up to you. Keep in mind that Apple still doesn't want you to use that USB drive for Time Machine backups.
Finally, there are only 3 ethernet ports on the TC. Can I add a switch?
Yes.

I want to add more capacity on hard drive of time capsule. Can i add a normal usb driver? I will see it as an external drive in the time capsule network? It will work as fast than time capsule? Thanks

I want to add more capacity on hard drive of time capsule. Can i add a normal usb driver? I will see it as an external drive in the time capsule network? It will work as fast than time capsule? Thanks

Can i add a normal usb driver?
Yes, but be sure that the drive is formatted correctly for Mac in Mac OS Extended (Journaled)
I will see it as an external drive in the time capsule network?
The drive will appear as a shared network drive, like the Time Capsule.
It will work as fast than time capsule?
No, the drive will operate at about half or 50% of the speed of the Time Capsule.

Can you share photos between computers on a local time machine network. I have iMac with lots of pictures I would like to view on my MacBook Air. Does anyone know how to do this?

Can you share photos between computers on a local time machine network? I have iMac with lots of pictures I would like to view on my MacBook Air. Does anyone know how to do this?

Can you share photos between computers on a local time machine network? I have iMac with lots of pictures I would like to view on my MacBook Air. Does anyone know how to do this?

I can Connect my iPhone to Time Capsule network, but I Cant get internett on it??

I can Connect my iPhone to Time Capsule network, but I Cant get internett on it??

Download 5.6 utility for Lion.. inbuilt version is hopeless.
http://support.apple.com/kb/DL1482
Set TC and wireless names to short, no spaces, no special characters.. ie pure alphanumeric.
Lock the wireless to fixed channels.. only 2.4ghz matters.. as iphone cannot connect to 5ghz.
Try 6, 11 first then 1. I think bluetooth may be set to use lower channels.
That seems to have fixed it for most people.

I just bught my new iPhone 4s 64 i always got sim fulier message i have to reboot avery time my network is vodafone Egypt i tried to contact them but they said its Apple

i just bught my new iPhone 4s 64 i always got sim fulier message i have to reboot avery time my network is vodafone Egypt i tried to contact them but they said its Apple

i have contacted 3 online and also been into a 3 store they tried mysim in their handset and it worked but when on of the workers tried theyre sim it said "no service" as usual? they said the phone reads the sim because it asked for the workers sim code?
thanks

How can I copy the date and time in Mail header?

How can I copy the date and time in Mail header?
I can copy everything else in the header for pasting in another application.
But not the date and time which is absolutely vital.
It was ok in 10.6

I suppose you could copy it from the Raw Source. View>Message>Raw Source

Ability to change Network Header Number

Hi
Can someone please tell me if there is a way to change the network header number (regardless of the status). I am looking initially for something similar to how you can change the project definition (field is open) or an appropriation request where you follow the menu path in Ima2n (environment > settings > apropn request number modifiable).
At present, once you create the NWH, the number field (AUFNR) is greyed out. There does not appear to be a switch in IMG so I was wondering if there is business txn similar to PSNC ( WBS element number change) that is available for Network headers. Or perhaps there is a program that allows this.
The issue is that we create networks with a manual external number that holds the project number (ie project being A-A12345. we would then create the network number as N-AA12345). As this is a manual process, user error is becoming an increasing issue.
Thankyou

Hi Virendra
Thankyou for your suggestion. I will try the exit
PSNC is a business status via txn BS22 (system status).
As to per your last comment - the explanation is that the business decided that they wanted the NW number to reflect the project number rather than a unrelated number range which we had previously used.
Trish

Time in Network Header

Similar Messages

Maybe you are looking for