Time independent and time dependent

Hi ,
Can anyone explain
What is difference between time independent master data and time dependent master data?
time independent navigation attribute and time dependent navigation attribute?
Regards,
maya

Hi Maya,
As the name states time dependent and time independent ceratin data could be dependent on time. Lets say there is a sales person and he resides in Indian from June to Dec and from Jan to May he resides in US then you can make that characteristic as time -dependent.
Bye
Dinesh

Similar Messages

Time Machine and Time Capsule don't seem to work well together?

Reposted.
I get the feeling there are some serious problems with the combination of Time Machine and Time Capsule.
This is extremely disappointing, as the idea of a centralized backup device on the network (instead of disks attached to each and every computer we have running Leopard) seemed like such a good idea and a good way to supplement our tape-based backup that takes place with Retrospect.
In reality, it's a disaster on both Intel and PowerPC systems. All systems and the Time Capsule are fully up to date with software updates from Apple. I have two 1TB Time Capsule units. It goes something like this:
1. I have a few systems (mainly Intel) that work perfectly with the Time Capsule. There are no complaints and no issues at all. These systems just quietly run their backups as they should. They are the definite minority--maybe one or two have worked properly.
2. I have some systems that complain from time to time (mainly PowerPC) but will back up with a little encouragement. These too are the minority.
3. And finally, I have systems that are nothing but pain. These are both Intel and PowerPC systems. They are also the majority of the systems I have. The most common problem is sudden loss of the credentials needed to access the Time Capsule hardware--a user will be going along about their business when the Mac OS asks for the Time Capsule user name and password--after it's already been supplied and backups have been running. This should simply never ever happen.
Another charming behavior I've seen is corruption of the sparse disk image file that each computer creates on the Time Capsule. Time Machine will complain that it can't perform the backup, and examining the disk image file with Disk Utility shows it to be severely damaged. Turning off Time Machine, deleting the corrupted sparse image file, and starting over fixes it. For a while.
Finally, there are the machines (again, both Intel and PowerPC) that just can't seem to actually get through the first backup run. They either go so far and can't continue, or never actually manage to get started. I've checked the disks in these computers and found no problem with the hardware or file system. The installations are fresh and fully up to date.
Meanwhile, I have computers running Leopard with directly attached disks configured for use with Time Machine. One is a QuickSilver that isn't even officially supported by Leopard, with a Firewire attached disk. It doesn't skip a beat. The other is an Intel Mac mini being used with Mac OS X Server 10.5.4 and a USB external hard drive. These machines just do their thing, and I never have to babysit them.
These problems with the Time Capsule have been so severe that I've just given up on most of the computers and shut off Time Machine entirely. We have tape backups that run over the week, so it's not a huge loss. But that's not what really made me throw up my hands and say "enough"...no, that was the speed. Even with just one computer backing up to it, the Time Capsule seemed terribly slow. Watching the progress indicator was just painful.
I put in a word about all of this to my independent Apple dealer, and they say I'm definitely not the first to complain about some or all of these problems. In fact, they told me they were going to set up a test lab in their shop to see if they could duplicate these findings. I have no doubt that they can.
There are a total of seven computers backing up to one Time Capsule. They all store maybe ~40GB worth of data including the OS. There are about six computers on the other. Because of the way the network is laid out, the Time Capsule is connected to a Gigabit switch (and that is the only thing it's connected to). It cannot be used as the router, although I know Apple suggests this. The Airport section is disabled--I have no need or desire to use it. Some computers link up at 100 megabits, others at 1 gigabit. There are no network problems--we have no problems moving large amounts of data across the same network to our tape backup machine.
Is anyone else seeing these kinds of problems? Am I doing something wrong or expecting too much from Time Capsule?

I may be on to something. The Time Capsules I have live in a telephone equipment room that is indoors but not directly air conditioned or heated. It doesn't ever get too hot to be comfortable in there--the highest I've ever seen the temperature was 80 degrees (F). Most of the time the temperature is between 60-78 degrees.
I happened to touch one of them the other day while it was in use, and I noticed that the casing was hot to the touch...not dangerously so I suppose, but much hotter than I would have expected.
So I turned a small fan on both Time Capsules and have left it running. And I've noticed that not only do backups seem to complete more quickly, the reliability is also better. I am going to try some of my most troublesome computers once again just to see what happens.
I know there is a fan pointed at the hard drive in the Time Capsule, but I can't see how it does much in the way of cooling things down. In my opinion, it's just surrounded by too many heat producing devices to do much good...after all, not only is there a 7200 RPM hard disk in there, but also a 500MHz Marvell processor and radio set.

Time Capsule and time machine with third party router

Hi,
This is the first time I use this site.
I have over three years old Mackbook.
APP has expired.
Now I want to know how to set up time capsule in a new environment.
I moved from Australian and Singapore.
I was using Time Capsule and Airport Extreme in Australia.
I have moved to Singapore.
I am using router provided by Singtell(Singapore Telecommunication). I do not have an Airport Extreme anymore. My housemate and I are using wireless internet-sharing. Needless to say that internet provider is SingTell.
Now I would like to know how to use time capsule and time machine with the network created with a router provided by SingTell.
What I did so far is;
Connected the time capsule to the power point.
Orange lamp lit and flashed for a few second and stop. Orange lamp stayed on.
Apple Utility does not recognise Time Capsule.
I prefer to use it wirelessly.
There are only two USB cable ports installed.
One is used to synchronize iPhone.
Other is used for a printer.
but if it is not possible, wired would be OK.
MacBook 13 inch 2.0 GH Late 2006
I hope that someone able to give me an answer for this.
Cheers,
morepubholidays

In this case the apple support people reveal a truly poor understanding.
You must bridge something.. you either bridge the TC.. which 90% of people do.. or you bridge the dsl router.. which some people do manage to do.. You will have to look that up for your modem and check with verizon if they support pppoe authentication.
IMHO just bridge the TC as you were told not to do.. as they are simply wrong about that.
If you already tried this and it didn't work.. try again.. it is the correct approach.
You have no choice. But this time let me suggest you do it using the 5.6 airport utility.. as the apple toyland v6 airport utility is likely half your trouble.
So here is how to get the utility into your computer.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
For screen shots see this post.
https://discussions.apple.com/thread/4668746?tstart=0
Then open the manual setup on the 5.6 utility.. go to internet tab. Connection sharing.. off bridged mode.
Select this and update..
Then all your IP addresses will be wrong.. I suspect this is where things are going wrong.. and messing you up.
Once the TC is bridged.. turn off everything and restart.. in correct order.. modem.. TC.. client computers etc. 2min gap between each.

What's the difference between time capsule and time machine?

What is the difference between time capsule and time machine?

See Using Time Machine with a Time Capsule.

Difference between Time Management and Time Evaluation

Hello
Is there any Difference between Time Management and Time Evaluation? if yes, then what is it? I guess there's no diff, time evaluation is a report..
please advice
Thanks

Hi Charlene,
Time management can be divided into 3 steps
1.Time Recording
2.Time Evaluation
3. Planning
Time Evaluation :
The recorded time data is grouped and converted to wage types which can be used by payroll for compensation.SAP provides a time evaluation program RPTIME00 for this purpose.
Standard schemas TM00 and TM04 are used for evaluation of time data got from positive and negative time recording approaches.
time evaluation program RPTIME00 also calculates accrual and entitlement for employees.
Regards,
Swapnil

Difference between Timer.stop() and Timer.reset()?

Hello,
What is the difference between Timer.stop() and Timer.reset()
functions because it seems that the 2 functions do the same thing?
I image Timer.stop() to stop the timer and when Timer.start() is
called the timer starts from where it stopped. For example, if I
have a 3 sec. timer (3000 ms). If I stop the timer after 2.5 sec.
and start the timer again, I would expect the timer to expire/trip
within .5 sec. Is this a correct assumption?
Thanks,
Nilang

Hello,
Here is a better description of what I am trying to do and
the problem I encountered.
I am developing an application that plays multiple sound
files at different time offsets. For example, snd1 starts at time
offset 0 and snd2 starts at time offset 5000 ms (5 sec). I have
created a timer for each sound file and enabled the handlers via
addEventListener() function. I encounter a problem after the timer
has been stopped (Stop button pressed) before the timer expires.
When the user presses the Play Button, the timer seems to be reset
because the onTimerComplete() function is triggered after an
additional 5000 ms (5 sec). Is this normal behavior? If this is not
the correct behavior, is there a workaround Any help would be
appreciated.
I have created a small application in Flash CS3 that depicts
the problem with just a single sound file. I have Flash Player
9.0.124.0 installed. Sample code is above.
Thanks,
Nilang

2TB Time Capsule and Time Machine on Snow Leopard 10.6.1 slooooooow

I have a 2TB Time Capsule on a 100Mps LAN that is shared by my Mac Pro and an iMac G5. No USB devices are connected to the Time Capsule. The Time Capsule and both computers are connected to the LAN through a LinkSys 8-port Cable/Router/DHCP.
While in Time Machine (about 30 backup folders) looking for a file to restore, it takes 2-5 minutes for Time Machine to change between backups. The time line on the right responds extremely slowly.
Whether or not the iMac is backing up has no effect.
Is this normal?
Thank you,
Don

See: http://www.codedifferent.com/2009/09/02/howto-reactivate-your-kyocera-printer-un der-mac-os-x-snow-leopard/
We have a KM-2550 and this solved it. HTH.

Can I backup an External Hard Drive using Time Machine and Time Capsule?

I have a Powerbook G4 with Mac OS X 10.5.2 and use an external hard drive *all the time*. I'd like to use Time Machine and my new 500GB Time Capsule to back it up along with the internal hard drive. Can I do this? Thanks for your help.

I believe so; this thread indicates how. Hope this helps.

Time Machine and Time Capsule Problems

I have a Time Capsule and my Time Machine no longer seems to work on my MBA.
It had been working fine for the past 2 months. It would do quick backups (between 1-3 MB normally) after my first long backup.
Now whenever I look at my MBA it will show Time Machine spinning but always says "Preparing Backup." It will stay in this state for days. If I try to stop the backup it will then be stuck in "Stopping Backup." The only way to get out of this is to turn off the computer. Then it will say "Last Backup Failed" and the next time it tries to sync the process will start over again.
In the past I would have some problems if the MBA went to sleep in the middle of a backup where the backup would fail, but it would work the next time it tried to backup. I don't know why it isn't working anymore.
Any advice would be appreciated. Thanks.

See this KB article. It may apply to your situation.
Mac OS X 10.5: Time Machine preferences may display "Preparing" for a longer time
http://support.apple.com/kb/TS1516
One observation it has is that anti-virus software can interfere with the backup process.

Time Balance and Time series in ASO

We are building an ASO application and we need Time balance and dynamic time series functionality.
If I go and use the TB functionality in ASO, my Time dimension has to be stored and I cannot put mdx formulas on my members (YTD,QTD,MTD)
I see various threads here and the recommendation is to have a new dimension to view the time series members (gary's blog...tnx for him)
However we cannot afford to have a separate dimension. The time series should be under Time.
How can we go with this?
Please help me with your suggestions/ideas. Thanks for your time.
TIA
- Sai

Any ideas guys?
John, can you please shed some light on this.
TIA

Reinstall my harddrive from Time Capsule and Time Machine but it do not finish. It tries to reinstall documents but it do not go further than aprox 3% of the data. What can/should I do?

I have tried to reinstall my harddrive after harddrive switch from Apple. Wien I try to install the harddrive fr.o.m. My Time Capsule thru Time Machine it starten god but suddenly it stoped and aprox. 3% of documents are installed. Now nothing happens. Wahl can/should I do?

The backup could be corrupted .. try using the disk utility to verify and to fix it.
See A5 http://pondini.org/TM/Troubleshooting.html
You can also try restoring the whole backup to an external drive.
Pondini has a number of methods listed here.
Q14-17 http://pondini.org/TM/FAQ.html
Do not restore by wireless connection.. isolate the TC and use ethernet only.

I'm having issues backing up a new Mac with time machine and time capsule.

I've been trying to backup an extra macbook to the time capsule via time machine but the two sparsebundles (for two other Mac's) were taking up too much room. I deleted a heap of old backups from one of the sparsebundles to create enough room. The time capsule was still showing up as nearly full so I tried the method Pondini (God rest his soul) describes to "compact" the sparsebundle. That didn't work (I got this message in terminal):
hdiutil: compact failed - Function not implemented
I've had many other issues which required hard resetting the time capsule twice. And since then my wife's Macbook is having trouble backing up. I'm beginning to think I should maybe get an external HD and move all existing backups from the time capsule to the external HD. Do a factory reset on the time capsule and start from scratch. I guess my question is, does this sound like the best solution and if I move all the old backups to an external HD, will they be accessible.

Yes, the old backups if they are working now will also be able to work from archive on USB plugged into the TC or into the computer directly.
Then do an erase of the TC and start over.
TM is becoming less reliable with each new OS.. and so far Yosemite is proving the worst by a big margin.
Strongly recommend that it is time to use Carbon Copy Cloner or some other software.
I use both TM to a TC.. and CCC to local usb hard disk..

What does Time Machine and Time Capsule actually do with data?

Recently got a new iMac and Time Capsule. Working fine, AFAIK, but it's a bit disconcerting not being able to see real files on the TC.
All I've got on the TC is a big sparse disk file, which I assume is a compressed image of my HDD. Reading up on various backup programs, it seems that this is the way network backups tend to work - create an image file, and append any changes. Presumably it's done this way, rather than with real files, to keep network traffic to a minimum, at the expense of local CPU overhead.
A couple of questions:
If I'm right that this sparse image contains all my data (and there aren't some hidden files somewhere), why doesn't the "modified" date change each time TM does a backup? It stays the same as the "created" date.
Can I do anything with this file, outside of TM, or is it best to leave it alone?

Yes, that is the way TM works for network backups. Data are stored in a sparse image file. The sparse image file's modification date would only change when the image file is expanded. Adding data into the image will not change the image's modification date (but the file's in the image file will be properly dated.)
Leave the file alone. There is nothing you can do with it that will be any good.

Time Machine and Time Capsule not working well.

Greetings,
I am having strange issues with Time Machine and the Time Capsule. I am using a MacBook Pro and have the 1TB Time Capsule. I am also using the Time Capsule as the wireless base station for my network.
The issue is, Time Machine has only once created a full back-up. Since then, it could not either connect to the disk or mount the image. I have tried several things like renaming my computer and renaming the Time Capsule. I have also tried copying via LAN and wireless. I even went as far as erasing the disk.
Now that the disk is erased, Time Machine cannot create an imgage on the drive. This is my latest issue.
Is this kind of trouble wide spread or very rare? Any way to fix it?
As a work-around, I am using Smart Backup instead of Time Machine to do my back-ups.

Standard Lion and ML issue..
Just reboot the TC.. sometimes with ML you may need to reboot the whole network.
In Lion you can use 5.6utilty and disconnect all users.. but apple has not made 5.6 utility available for ML or not yet. Perhaps they don't know about the bug. or if you put your head deep enough in the sand you can pretend there is no such problem.. it does expose some other parts!!
Pondini has info on a work around to load 5.6 utility into ML.
Read C12 and C17
http://pondini.org/TM/Troubleshooting.html

TIP, TOP, Time Types, Time Balance and Time pair

Hi Friends,
This is Neehar.
I am new to SAP HCM.
Please can someone help me in explaining me about TIP, TOP, Time Types, Time Balance, Time Pair and Internal Tables.
Please let me know, how Internal Table works and which values are stored in Internal tables.
Please explain me with a Scenario.
Thanks
Neehar

Hi Neehar,
Please go through the below documents which will answer your questions.
Time Types - The DNA of Time PCRs
Function TIMTP
Internal Tables in Time Evaluation - Personnel Time Management (PT) - SAP Library
I hope this resolves your issue.
Regards,
Vivek

Time independent and time dependent

Similar Messages

Maybe you are looking for