Time Interval for Daily Calendar in APEX 3

Hi,
we're looking at upgrading to Apex 3 and I have a question about the Daily Calendar time interval. Is there a way to change the interval to say, 15 minutes from the default 1 Hour?
Cheers
Kofi

Hello Kofi,
"Now looking at what I can see on apex.oracle.com, are you saying we'd just have to modify the daily calendar template?"The template only control the look of the calendar, not its functionality. If the default daily view meets your needs, you don't have to define any new templates.
"I'd imagine that the whatever is creating the tags that will be displayed by the template needs changing to incorporate the other 15 minute cells I would add"Most of the calendar functionality you can control can be defined on the "Calendar Attributes" tab. The most important is the date column. If this column includes reference of time (on top of the date, of course) the APEX engine will automatically associate your entry with the proper "Hour" row. You are not adding cells. You are adding calendar entries. If several of these entries share the same hour slot, APEX will put all of then in the same row.
The best way to understand it is simply define these entries. As I understand, you have access to apex.oracle.com, so it shouldn't be a problem.
Regards,
Arie.

Similar Messages

Time interval for contoured move

I have a interpolator and it output the interpolated data with time interval 1ms. When I do the experiment using stepper motor controlled by 7344 (contoured move). the time interval is much bigger the 1ms, resulting in very low velocity. How to solve this problem? Increasing the time interval of interpolator? Is there anyone has any ideas? Thanks a lot!

In contouring mode you can set the time interval for the position buffer in the Configure Buffer function. Here is the parameter description:
Requested Interval (10 ms) is additional data for the Position
buffer type. The Position buffer type requires a Requested Interval parameter,
and indicates the time between contouring data points in milliseconds. For all
other buffer types, the Requested Interval parameter is ignored.
The controller uses the closest value it can that is greater than
or equal to the interval value you requested. Your time interval must be an even
multiple of the PID rate. Refer to the description for the Actual
Interval parameter for more information.
When used with Breakpoint or High-Speed
Capture, Requested Interval indicates how often, in
milliseconds, the onboard data is updated from the hardware, and the value is a
whole number.Please note that 10 ms is the fastest interval that you can set. If your data is sampled with a 1 ms time interval and you want to use the 10 ms time interval with your 7344 you simply should decimate your contouring data array by copying every 10th value to your contouring position array.
Best regards,
Jochen Klier
National Instruments Germany

Diplay TImestamp in Daily calendar in APEX

Hi,
I want to display appointments within the time row in an apex calendar (daily and weekly view). With the Date picker I can choose a time which is stored correctly in the timestamp of my table. But I did not find a way to use the saved time to display the specific item in the time row it is concidered for. The Items are always displayed at 0:00. Time is completely ignored.
I was searching hours to find out the issue but did not find a solution yet. I'm sure it's quite simple but I don't see the answer.
Can anybody help?
Thank you in advance.

What are you using as your date column for the calendar region?
Your data is fine and your select is not truncating the time. I am not really sure what is causing the problem, The only thing I can think of now is either the calendar template has been modified or there is a random problem with the region.
Try to make a basic calendar on this table on a different page. You may have to just recreate the region or you can go through the motions and import the app to apex.oracle.com and i can look at it.
Cheers,
Tyson Jouglet

Setting the time interval for LEDs

hello I am new to labview, I am trying to do something simple, but made it a lot more complicated than it needs to be. I need turn on an LED and turn it off, but in random intervals, such as turn it on for 1 second, then turn it off for 2 seconds, then turn it on for 2 seconds, then turn it off for one second, so no real pattern. I need to do this to the LED for a minute, I tried a really convoluted method with a time target and case strictures, but I can only program that to activate in specific intervals, I am not able to set them. Any help will be greatly appreciated. Here is a VI of my convoluted method that didn't work.
Attachments:
LED time interval test.vi ‏43 KB

You have not tried to implement altenbach's suggestion of autoindexing an array of delays.
The Reshape Array needs to be outside the for loop. You want to reshape the 3x4 2D array into a 12 element 1D array. What you are doing is reshaping a 3 element 1D array into a 12 element 1D array. This results in the last nine elements always = zero.
The Arduino expects an 8-bit unsigned integer. So the data in the arrays should also be U8.
If the index to Replace Array Subset is negative or greater than the maximum index in the 2D array, it does nothing. I am not sure exactly what you are trying to do with the array index manipulations so I did not try to fix it. I added some indicators to show what is happening.
When using autoindexing on a for loop, do not also wire to N.
The Arduino Rseource wires and the error wires should be connected through the loop boundaries with shift registers, not tunnels, particularly not autoindexing tunnels.
I do not have an Arduino, so I used Diagram Disable structures to disable the Arduino VIs for testing without getting errors.
You seem to be allergic to straight wires. Actually the auto wiring tool is probably on and IT is allergic to straight wires. I find it easier to understand a block diagram where the wires do not have excessive bends.
Lynn
Attachments:
Project 1 with arduino.2.vi ‏23 KB

Multiple time zones for one calendar entry

I'm running iCal on Lion 10.7.4 , as well as the Calendar app on iOS 5.1.1 on my iPhone and my iPad. When traveling, I sometimes have a starting time in one time zone and an ending time in another. (When flying from NY to CA, for example.) Is there some way I can have two time zones within a given event for cases such as this? I've turned on Time Zone support in iCal, but that only allows me to set a one-off time zone for an entire event.
Microsoft Outlook on a Windows machine allows for this; is there any way for me to do it on my Mac, iPhone, or iPad?

Hi,
You could set the event, then change the timezone to the destination one and then set the end time. When you switch timezones the start and end times should change in iCal (unless the event is set to floating).
John M

How can I change the time zone for a calendar entry with iOS 7?

I want to make a new entry in my calendar (iOS 7) using a different time zone as the one I'm located in. There isn't any option to choose the time zone like there is in OS X.
I know I can switch off the option to automatically change the time zone in the preference pane of Mail, Contacts and Calendar to get the option in calendar but I want to use this automatic switch.
Is there any option to change the time zone of a calendar entry without loosing this automatic switch?

Got it!
In your backing file you'll need the following in your handlePostbackData method:
BookBackingContext bookCtx = BookBackingContext.getBookBackingContext(arg0);
bookCtx.setupPageChangeEvent("PageLabel");

How to set the time interval for data obtain through labview via write measureme

I'm need to programme to obtain data from oscilloscope. Currently my laptop able to communicate with Agilent DSO6014A oscilloscope via USB. I'm include the write measurement in mty program and save the data in .lvm file. But the time interval in the data are too small which is in micron seconds. Is there a way to modify the interval values?

The attached file is the capture of my diagram. Thanks.
Attachments:
Capture.PNG ‏56 KB

If I enter the time of day as I am entering a new event, iCal automatically enters the time into the daily calendar and deletes the time of day from my entry

Hi,
This feature is new in Lion. I get what Apple is doing but I don't view the calendar in day mode. I use iCal exclusively in Month mode. Therefore, if I add an entry like "10:00am doctor's appt.," iCal will (correctly) assume the obvious, and enter the event as "doctor's appt." at the 10:00 am slot in the daily view. The trouble is, I don't look at the daily view, and I have missed a few appointments because I didn't realize what was going on.
My best work-around right now is to use a semi-colon for the time. That way, iCal won't automatically assume I'm talking about a time of day. For example, I now write "10;00am doctor's appt." This way, iCal puts in on the monthly calendar exactly the way I wrote it, like it was doing in Snow Leopard.
Is there a more elegant solution than using semi-colons for the time to counteract iCal's insistence on entering the time automatically into the daily view?

Perhaps users in the iCal forum know of a solution?

Looking for Daily Calendar At-a-Glance App

I'd love to find an app that will post an alert to my iPhone each morning listing out my day's calendar events. Anyone know of one? For what it's worth, I have 4 active calendars in Calendar app.

I don't know of any apps like the one you want; however, there is probably something out there that will do the job. I did want to suggest Google Calendar, which will send you email and SMS reminders about events and things you have put on your calendar. You might already be aware of this, so if you are, just disregard. I just wanted to suggest it in case you weren't aware of it. I use it all the time, and it's very handy.

Setting a time interval for a method

I have been working on getting a "shake" register going in the accelerometer, and I pulled a good one off this board -- it registers whenever the iPhone moves quickly along any of the axis as a shake.
The problem is that the method called when the shake registers plays a sound, and the sound skips when played -- while the iPhone is still moving, the "shake" is still registering, and so as long as you shake it, the sound keeps beginning to play, resulting in a skipping noise.
Is there any way that I can make sure the method that plays the sound only runs once every five seconds or so? I tried putting flags on the accelerometer method to keep it from being run while the sound method is running, but it finishes so fast that it's not helping. I also looked at the AudioServices System sound completion proc, but it flags with a warning when I try to compile:
AudioServicesAddSystemSoundCompletion(mySound, NULL, NULL,MyAudioServicesSystemSoundCompletionProc, nil);
It's fine if the application pauses for five seconds or so after the sound plays (and in fact the sound is about three seconds long, so if I could just get the accelerometer method to not run again until the sound stops playing, that's fine, too). Any ideas?

why donÄt you just save the time of method invokation to a variable and upon starteing with you method you compare wether your last start was 5 seconds ago?

Editing Time interval for multiple photos in iPhoto

Is it possible to edit the time of multiple photos in iMovie '08, without editing all of them?

Is it possible to edit the time of multiple photos in iMovie '08, without editing all of them?
Have not checked to see if there have been any recent, new changes, however, the old method was to select and change one photo manually and then select and paste its settings to all of the rest of the photos at once.

How to display 15 minutes increment in a daily calendar.

Hi,
I'm interested to display 15 minutes by 15 minutes the time in the daily calendar. Is it possible with the last version of APEX ?
Thanks.
Eric

This is the problem I'm having by not having the 30 minutes calendar display:
I'm developing an application where people can arrange meetings every thirty minutes (at HH:00 and HH:30) and the calendar is supposed to show all the meetings saved in the DB.
The monthly calendar works properly, but the weekly and daily calendars don't show those meetings starting in a "HH:30" format time, only show those that start at :00.
e.g. If I set up a meeting at 10:00AM there is no problem, but If the start time is 10:30AM this meeting is not showed in the daily or weekly calendar.
Please help.

Finding Missing Time Interval in SQL

All
Need help with SQL to find Missing Time Interval.
My query returns data as given below
Data1
Column      StartTime    EndTime
=======   =======   =======
T2               9:00          18:00T3               20:00         23:00
Data2
Column      StartTime    EndTime
=======   =======   ======= T1               15:00          20:00
T3               20:00          07:00
Take above output, I want to find Time Not on my Data in 24 hours from First StartTime on each Data Set.
Example: Data1
First StartTime: 9:00 AM (T2 record)
Add 24 hours, which will be 9:00AM Next day.
Expected Result to get missing time interval for Data1
18:00 - 20:00
23:00 - 9:00 (next day)
For Data2 Expected result
7:00 - 15:00 Next Day
Database version: 11g
Anyone come across to calculate missing time interval? Can I use PL/SQL for this like pipeline function?
Any help/directions/references I highly appreciate.
Thanks in advance.
Karth

One way of finding Missing Intervals:
alter session set nls_date_format = 'DD-Mon-YYYY HH24:MI:SS';
with data as
select to_date('28-Jun-2013 09:00', 'DD-Mon-YYYY HH24:MI') start_time, to_date('28-Jun-2013 18:00', 'DD-Mon-YYYY HH24:MI') end_time from dual union all
select to_date('28-Jun-2013 20:00', 'DD-Mon-YYYY HH24:MI') start_time, to_date('28-Jun-2013 23:00', 'DD-Mon-YYYY HH24:MI') end_time from dual
select start_time, end_time,
       case when lead(to_char(start_time, 'HH24'), 1, (select min(to_char(start_time, 'HH24')) from data)) over (order by to_char(start_time, 'HH24')) not between to_char(start_time, 'HH24') and to_char(end_time, 'HH24')
              then to_char(end_time, 'HH24:MI') || ' - ' || lead(to_char(start_time, 'HH24:MI'), 1, (select min(to_char(start_time, 'HH24:MI')) from data)) over (order by to_char(start_time, 'HH24:MI'))
            else
              null
       end period
from data
START_TIME                END_TIME                  PERIOD
28-Jun-2013 09:00:00      28-Jun-2013 18:00:00      18:00 - 20:00
28-Jun-2013 20:00:00      28-Jun-2013 23:00:00      23:00 - 09:00
Time information need not be stored in additional Varchar fields, if you have Date Column. You can use Date fields that store Date and time both.
Another way of approaching this problem is with Connect By Clause or Model Clause. Use the search functionality to find solutions using those methods too. However, in my opinion, this method is the quickest of all.

Why do I have two time zones in my calendar?

With a recent move to a new time zone I now have two time zone in my calendar. My area code is in a central time zone but have moved to the east coast.
I have checked my icloud calendar, iPhone settings and each is set to eastern time.

Hi beachbouy,
If you need to change the time zone for your calendars in iCloud, use the steps in this article -
iCloud: Change your calendar’s time zone
Thanks for using Apple Support Communities.
Best,
Brett L

How to set olite auto sync time interval

Hi all,
How to set the auto sync time interval for a publication item, publication or to a user.
Can anyone tell me, which one is best among setting the auto syncing and syncing with the code.
I am searching for the code to sync in java only upload or download and both. I tried with some code but it is giving me oracle.lite.mSync.SyncException: AES encryption error.
Thanks in advance,
Khadaree

Bonjour,
Même demande ;-)

Time Interval for Daily Calendar in APEX 3

Similar Messages

Maybe you are looking for