Time Interval isn't saved

Hello,
The Time-interval on our BW system is set to an upper limit of year 2012. Since this is causing problems, I need to change this value to 9999. With transaction RSRHIERARCHYVIRT, on "General Settings"-tab, I enter 9999 and hit save. No error is generated, but it isn't saved: renewing the transaction shows 2012.
SU53 doesn't show any authorisation problems.
SAPNote 930521 looks like the problem, but our support pack is higher. The Support Package of the BW system SAPKW70018 and it was verified that the suggested correction is implemented.
The [Forum Thread|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=930521] suggested that the value should be changed in ECC and transferred to BW. But again: the same problem arises in ECC (it doesn't save, but no error is generated and no authorisation problems occur).
But on a different BW system I can change the value in the RSRHIERARCHYVIRT. This system is on Support Package SAPKW70013.
Any clues to the solution?

See if [SAP Note 1224801|https://service.sap.com/sap/support/notes/1224801] is related to your problem

Similar Messages

LSO WBT: learning progress time isn't saved for otype P (but works for US)

Hello,
We're noticing that the progress time of a web-based training isn't saved for a person (otype P). However, for a user (otype US), the time is saved correctly in table LSOLEARNING_C.
The number of completed learning objects is saved though, it seems the problem is only with the time (field TTIMECRS).
What could be the reason for this behaviour? Thanks!!

Hi Dave,
There is an authorization issue with the standard "LSO_CPLAYER" role. I am assuming you have assigned this role to the Content Player communication user. I also had the same issue. I did not have a luxury of time so the immediate fix for us was to assign additional authorization to the user id that resolved the issue.
The reason it works only when there is no pernr attached to the user id is that, in this specific situation the system uses the User Ids authorization to update the data in back-end. When the pernr is attached to the user id then the system uses the Content Player user id to update the data. While doing so if the standard role "LSO_CPLAYER" is assigned then due to the missing authorization it is able to update everything except the time. Please let me know if you require any further clarification or information on this.
-Ravi Sekhar

Since installing Yosemite, my iMac isn't saving Notification preferences.

Since installing Yosemite, my iMac isn't saving Notification preferences. I know it's an issue, because I've seen it in other forums. Any help?

Here are the instructions I got from AppleCare from an Apple Engineer. I'm not sure if the fix was specifically for my machine or if it'll work for someone else. Follow at your own risk.
1. Open the Library folder in your Home folder.
2. In the Library folder, open the Application Support folder.
3. Locate the folder named NotificationCenter. Drag this folder to the desktop.
4. Next, open the Terminal application.
Copy and paste each line of these commands into the Terminal window, in order. Press return after each line:
cd `getconf DARWIN_USER_DIR`
rm -rf com.apple.notificationcenter
killall usernoted; killall NotificationCenter
5. Close the Terminal app.
6. Restart your computer.
The notification preference changes won't stick until you restart a 2nd time after this.

XY-graph, 30 minutes constant real time interval

I want to create an XY graph with a time interval of 30 minutes. Minimum X-scale range should be the time the program starts and Maximum X-range 30 minutes from startingpoint. Example: Starting the program 10:00: The graph should be scaled from 10:00 to 10:30, no autoscaling. After 30 minutes i want to start from 10:30 to 11:00.
Anyone know how to do this?
Solved!
Go to Solution.

Right click the XY-graph and play with properties and you should be able to achieve what you want.
Below is the programmatical approach to do all that.
Also atatched is the code for the same (saved in version LV 2012).
I am not allergic to Kudos, in fact I love Kudos.
Make your LabVIEW experience more CONVENIENT.
Attachments:
XY Graph with properties.vi ‏8 KB

Error Message : Object could not be scheduled within the specified time interval

Post Author: mohamed elkashef
CA Forum: Publishing
Dear All when i try to run event for daily reports it sometimes take generation status failed with this error message : Object could not be scheduled within the specified time interval so i need to know the reason of failure and how can i fix this error thanks a lot

Post Author: nvnaresh
CA Forum: Publishing
Dear jsanzone,
I'm facing the same error even when the server time out is more than the query execution time of the report.By server time out I assume connection time out of WebI report server which I have set to 180 min.But the actual query takes maximum of 5 min.
We are using BO XIR2+SP2.
I scheduled a webI report to get saved in Excel format to an Unmanaged disk location upon a File Event.
We have 3 such reports to be scheduled on the same event.
Expected frequency of File Event getting fired in a day is twice.Scheduling frequency I have set it as every one hour with the file event.
This usually should work fine.
But frequently 1 or 2 of the above 3 instances are getting failed with the following error "Object could not be scheduled with in specified time interval " after being in Running state for few hours(8). Amazingly this is not happening every time. May be once or twice in a week.This works fine after I restart the BO services and the same thing repeats after 3 or 4 days.
Do I need to increase any server parameters?
Why is this happening randomly?

Firefox isn't saving my tabs

I need to start off with the warning that I have no clue what I'm doing and the work I've done so far was based on other people's advice or information I found on MozillaZine. This problem started after I downloaded the latest version of Firefox.
So... Firefox isn't saving my tabs and I think I know why, but I'm not 100% sure. (I have it saved that I want to restore my previous session whenever I open Firefox.) I went to about:config and went to look for browser.sessionstore.enabled to see if that was messed up, but the file wasn't even there. Obviously, I'm assuming that's the problem. If anyone could tell me if it sounds like I'm on the right track that would be great.

The pref [http://kb.mozillazine.org/browser.sessionstore.enabled browser.sessionstore.enabled] is no longer used in Firefox 3.5 and later (bug 449596).
Remove that pref if you still have it via the right-click context menu and choose Reset.
Check that Session Restore is enabled.
You can look at the 'browser.sessionstore' prefs on the '''about:config''' page and reset prefs that show as bold (user set).
http://kb.mozillazine.org/browser.sessionstore.max_tabs_undo
http://kb.mozillazine.org/browser.sessionstore.max_windows_undo
http://kb.mozillazine.org/browser.sessionstore.resume_from_crash
If you use [[Clear Recent History]] in Firefox 3.5/6 or [[Clearing private data|Clear Private Data]] in Firefox 3 to clear the 'Browsing History' when Firefox is closed then restoring tabs from the last session (e.g. "Save & Quit" or "Show my windows and tabs from last time") doesn't work.

Bug: Fill of a group setting isn't saved

If you have a create a group with at least one layer, then change the Fill of the group to anything other than 100%, that value isn't saved for the next time that you open that file. It remembers the opacity, paint type (pass through is default), and any style effects put on the layer, but it doesn't remember the Fill setting.
I checked it in CS5, and groups in CS5 didn't let you edit the Fill setting, so this is new in CS6. I made both psd and psb files with maximum file compatibility both on and off, and the Fill setting wasn't saved in all cases.
I'm using windows 7 64bit.

I'll second the original poster.
Just wanted to point out that I have observed the same behaviour in the Mac version of the software.
HTH,
Ntafy

Time Interval for Daily Calendar in APEX 3

Hi,
we're looking at upgrading to Apex 3 and I have a question about the Daily Calendar time interval. Is there a way to change the interval to say, 15 minutes from the default 1 Hour?
Cheers
Kofi

Hello Kofi,
"Now looking at what I can see on apex.oracle.com, are you saying we'd just have to modify the daily calendar template?"The template only control the look of the calendar, not its functionality. If the default daily view meets your needs, you don't have to define any new templates.
"I'd imagine that the whatever is creating the tags that will be displayed by the template needs changing to incorporate the other 15 minute cells I would add"Most of the calendar functionality you can control can be defined on the "Calendar Attributes" tab. The most important is the date column. If this column includes reference of time (on top of the date, of course) the APEX engine will automatically associate your entry with the proper "Hour" row. You are not adding cells. You are adding calendar entries. If several of these entries share the same hour slot, APEX will put all of then in the same row.
The best way to understand it is simply define these entries. As I understand, you have access to apex.oracle.com, so it shouldn't be a problem.
Regards,
Arie.

How do I select and email a whole lot of photos on my iPad from my iPad emails? It seems I have to go into Email and then insert one photo at a time? Isn't there a way to select all in the photos and then email the batch.?

How do I select and email a whole lot of photos on my iPad from my iPad emails? It seems I have to go into Email and then insert one photo at a time? Isn't there a way to select all in the photos and then email the batch.?

Actually, you can email up to 5 at a time from the Photos app. Select any more and the email share option will not appear.
If you explain why you need to email large numbers of photos, we might be able to offer an alternative.

Calendar time interval

Hello,
This is one of the questions asked in the forum by some one else too some time back.
Using ADF 11g, By Default Calender component shows time interval of 1 hour. Can we configure it to show the time interval of 15 minutes.
For example, default calendar shows
1:00 AM
2:00 AM
3:00 AM
But I would need something like
1:00 AM
1:15 AM
1:30 AM
1:45 AM
2:00 AM
Any input is greatly appreciated.
Thanks....

I am also in need of this feature, any inputs/suggestions are appreciated.

Reducing the time interval in file Adpt to write a flat file at a location

Hi All,
I hav a scenario where i hav to write a flat file (XXX.txt) to a location. b4 doing that, i hav to check whether XXX.txt already exists or not. If it doesn't exists then i hav to write the XXX.txt file there. if it already exists, then i hav to wait until that xxx.txt file gets deleted.
In the receiver file adapter v hav an option file construction mode = create which does the same thing. but the problem here is it is taking too long (more than 5 min) which is not at all acceptable in my case (it is ok if it takes 1 min).
Is there any way to reduce the time interval using the same option?
Or do we hav any work around solution for acheiving the same scenario?
any help wud b appreciated.
Thnx in Adv.
Anil

Anil
As far as my knowledge goes I think it is not possible because we are not going to do anything from our end. XI is doing processing and creating a file for you. But you might be sending a large file at a time. So you have to improve the performance in your scenario. You check this urls on how to improve performance in XI:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/70ada5ef-0201-0010-1f8b-c935e444b0ad
Improving performence in XI
Maximum Permitted File Size in XI
---Satish

Fatch data from a table after a given time interval

Hello
I want to fetch date from a table after a fixed time interval is there any
way to do it.
thanks

Not sure what you want. But maybe this helps.
SELECT date+interval FROM atable;
Also if you tell us more about the business case the answers could be more to the point.

Time Machine isn't backing up to Time Capsule

My Time Machine isn't backing up to my Time capsule.
I am using OS X 10.8.2 which I believe is the latest version.
The problem I have is the following error message pops up on my Macbook pro screen :
Time Machine couldn't complete the backup to "Alec McDermott's Time Capsule".
The backup disk image "/Volumes/Alec McDermott's
Time Capsu/Alec McDermott's MacBook
Pro.sparsebundle" is already in use.
Any assistance anyone can offer would be very much apprecated.
Alec

See here...
The Backup disk image ... sparsebundle ... is already in use.
From Pondini’s excellent Information Here...
http://pondini.org/TM/Troubleshooting.htm

How to take the data from excel list to sap r/3(with time interval)

hi experts,
   how to transfer the data from a third party system(if it is in format of excel) to sap r/3.with that in a particular time interval,it will delete the data from excel sheet.

Hi
use the Fm
'ALSM_EXCEL_TO_INTERNAL_TABLE'
       EXPORTING
            filename                = p_path
            i_begin_col             = '1'
            i_begin_row             = '2'
            i_end_col               = '2'
            i_end_row               = '500'
      giving the starting row and column and passing the ending row and column name
Reward points if useful........
Regards,
Nitin Sachdeva

How to create a unique file name each time the form is saved?

I've got a form with several data items. When the user saves the form, it saves it as an .xml file. So far so good. But then I want the user to be able to start over and put in a new data set. I used the reset form button and this clears out the old data. But when the user goes to save the form for the second set of data, the default name of the .xml file is the same as the last record set. How do I get LCD to create a unique data name each time the form is saved? I know that the user can enter a new name, but I do not want them to have to think that much.
Alternatively, is there a way that a user can enter several forms of data and save all of the data in one XML file that my PDF can scroll through or that I can import into excel and keep all of the data sets separate?

Thanks Paul for the post. It sounds like this program is simply not designed for one user to keypunch a batch of forms. It would appear to limit the program's use to users who only need to key in one record/form. While a good solution for multiple users who need to enter just one set of data, the limitation would explain why this program is not widely used.

Time Interval isn't saved

Similar Messages

Maybe you are looking for