Time is not correct in CME even though it is right on the router it runs from

Hi all,
We have a 2911 that is running CME on top of. The router time is correct but within the CME GUI it is one hour fast. I checked all the setting with timezone and others and it seems to be correct.
In the GUI i tried to change the time and it will just revert whenever I hit apply. I enabled the setting that allows change time in GUI.
Please see attached
any suggestions would be greatly appreciated.

Hi,
I did enter the time-zone info under the telephony-service configuration mode. just to be sure i did it again.
same effect, the router from cli will display the correct time, the phones will display the correct time, but if you goto http://routerip/ccme.html and click on system the time is 1 hour faster.
unity which syncs time from this router (set as ntp master) will also have timestamp 1 hour fast.

Similar Messages

Ipad 2 not recoginzed by itunes, even though has done so in the past. Tried all recommendations by online support.

ipad 2 not recobnized by itunes, even though it has done so previously. tried all tips provided by online Apple support. any ideas.

Well I finally had enough and completely re-installed WIndows 8. Initially this had no effect, but then I started getting error code '0x8000084 - unable to connect to iphone' which I took as a positive because at least now it was spotting there was a device even if it couldn't connect to it.
Going through the same steps as above I plugged the iPad into one of the USB3 ports on my PC and as if by magic, the iPad popped up and, as I write this, is happily syncing.
I'm running with a new i7 Ivybridge motherboard, I guess there must be some driver issues with the USB2 ports, hopefully rectified soon.

Time machine not recognizing free space even though it "knows" about it

Trying to back up to an external hard drive I'm getting this error from Time Machine when it tries to back up:
"This backup is too large for the backup volume. The backup requires 52.5 GB but only 495.8 GB are available..."
Clearly it KNOWS the space is there, but its math is wrong since it seem to think that 52.5 GB is greater than 495.8 GB.
Suggestions?

Sometimes, this error is legitimate. The user may not realize that they need to exclude additional hard disks that TM may be seeing. This is done in the “Options…” window of the Time Machine Preferences.
Nevertheless, many times this error just doesn’t make sense, stating that not enough free space exists for a backup that is clearly smaller. (“The backup requires 45.9 GB but only 182.6 GB are available”)
The answer and fix may have been discovered by a poster in the macosxhints forums: (http://forums.macosxhints.com/archive/index.php/t-84284.html)
Essentially, while Time Machine DOES delete old backups from the sparsebundle, it DOES NOT free up the space occupied by those old backups. Eventually, "all previous backups were deleted and no space was gained. . . . What appears to be going on here is that the sparsebundle isn't self-shrinking - unused bands aren't being automagically discarded."
The solution is to compact the TM backup sparsebundle in Terminal using:
hdiutil compact yoursparsebundlefilename.
He concludes, "I gained 30+gb of space on the backup volume by compacting that sparsebundle. And now TM runs just fine, since it has plenty of space."
Obviously, this is a bug in TM. It does not appear to effect everyone, and only seems to appear under certain curcumstances.
Let us know if this works for you.

How can I get my ES2 loops to play correctly? I keep getting the message that the audio is not found when I drag the loops from my audio browser even though they play fine in the preview.

How can I get my ES2 loops to play correctly? I keep getting the message that the audio is not found when I drag the loops from my audio browser even though they play fine in the preview.

It's exactly as I stated. Whenever I try to drag these kinds of loops (ESX24 / software instrument loops? the ones marked in green with the white music note next to them) from the loop browser into the timeline a message comes up saying Audio Not Found for that loop. And a new track is created automatically when loops are dragged into the timeline, so I'm not creating some other random / synth instrument track so I'm not sure what the deal is... But perhaps I'll try creating a software instrument track first and then drag the loop into that track and see what happens - maybe there's something with the default settings that automatically creates audio tracks whenever loops are imported?

MacBook Pro i5 with retina will not recognize WD Passport even though I successfully used it to transfer programs and files from my older MacBook ten days ago. It receives power from the USB, but when using Time Machine I receive the message that there is

MacBook Pro i5 with retina will not recognize WD Passport even though I successfully used it to transfer programs and files from my older MacBook ten days ago. It receives power from the USB, but when using Time Machine I receive the message that there is not an external device connected.

If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
Please tell us more about the modem if the above gives you issues.

I am trying to purchase Mountain Lion to update my laptop. However, App Store is not accepting my card even though all information is correct.

Hi, I am trying to purchase the newest Mountain Lion to update my laptop. So that I may install the newest Pages.
However, App store is not taking my card even though all information given is correct. It says that my address does not match my bank address. I even treid copy paste my address from the bank website to the address entry just to make sure it is correct. However, my card is still not accepted.
Help, anyone?

It says that my address does not match my bank address
Try the troubleshooting help here.
* Billing information is the same for both the Mac App Store as well as iTunes

After hard reset my time capsule is not found in airport even though its light is green so cannot reset

After hard reset the time capsule is not found in airport even though i have reconnected in proper order - says backup disc not found

Something is wrong because a hard reset will never leave the TC with green LED.
What version TC.. what firmware??
What OS on the computer?

My MacBook Pro will not open any application or program that requires internet, even though I am connected to the web.

My MacBook Pro will not open any app or program that requires Internet, even though I am connected to the web. I recently installed Norton AntiVirus and think it may have changed a setting that I couldn't find. I uninstalled Norton and it didn't help. Every time I open Safari, iTunes or any other program that tries to connect to the Internet, it crashes. Strangely enough, Skype still works, but nothing else.
I have OSx 10.6.8.
I have tried erasing plists, and all the standard troubleshooting, ie resetting modem, restarting computer, reloading Safari from disk.
Any help would be greatly appreciated. Thank you in advance.

Change your router channel. Sometimes this is all you will have to do.
Power cycling the router. Read the router's user manual or contact their tech support for instructions.
System Preferences/Internet & Network/Network
Unlock the padlock
Locations: Automatic
Highlight Airport
Click the Assist Me button
In the popup window click the Diagnostic button.
System Preferences/Network- Unlock padlock. Highlight Airport. Network Name-select your name. Click on the Advanced button. Airport/Preferred Networks-delete all that is not your network.
Place a check mark next to "Remember networks this computer has joined." Click the OK button and lock the padlock. Restart your computer.
http://support.apple.com/kb/TS1920 Mac OS: How to release and renew a DHCP lease
No internet connection (wireless)
Check to see if an extra entry is present in the DNS Tab for your wireless connection (System Preferences/Network/Airport/Advanced/DNS).
Delete all extra entries that you find.
Place a check mark next to "Remember networks this computer has joined."
Other resources to check into:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
Netspot
How to diagnose and resolve Wi-Fi slow-downs
Pv6 troubleshooting
Mac OS X 10.6 Help: Solving problems with connecting to the Internet
What Affects Wireless Internet?
Solutions for connecting to the Internet, setting up a small network, and troubleshooting
I uninstalled Norton and it didn't help.
To properly uninstall Norton software follow these instructions - Locate Symantic Solutions folder inside the Applications folder at the root level of your HD, launch the Symantec Uninstaller application, select the Symantec AntiVirus Corporate, Norton AntiVirus & Norton AntiVirus Auto-Protect entries and click the Uninstall button.
Confirm your decision when prompted and then enter your administrator password in the space provided.
Retart your computer & Norton should be gone for good.
If the above does not work, download a copy of Symantec’s RemoveSymantecMacFiles removal utility. This utility will launch Terminal & remove the Norton components.

HT5463 Hi I am on an iphone 5 IOS7 and when I look at the 'Silence' setting at the bottom of the Don Not Disturb' screen - then even though all of the settings on that screen are off i.e. not green - the 'Silence' -'Only when iPhone is locked' setting is

Hi I am on an iphone 5 IOS7 and when I look at the 'Silence' setting at the bottom of the Don Not Disturb' screen - then even though all of the settings on that screen are off i.e. not green - the 'Silence' -'Only when iPhone is locked' setting is tickedP

Chris thanks for your reply, if none of the Do Not Disturb settings are switched on - then am I right that this setting will have no effect. I.e. I want my phone to ring at all times, so have turned off all of the do not disturb settings

For some reason my Firefox is no longer allowing me to stay logged on to certain sites e.g. Even though I now allows click the keep the keep me logged in on facebook I now have to log on each time. How do I fix this. Kind regards Bev Greene

For some reason my Firefox is no longer allowing me to stay logged on to certain sites e.g. Even though I now allows click the keep the keep me logged in on facebook I now have to log on each time. How do I fix this.
Kind regards
Bev Greene

Websites remembering you and automatically log you in is stored in a cookie.
* Create an allow cookie exception (Tools > Options > Privacy > Cookies: Exceptions) to keep such a cookie, especially for secure websites and if cookies expire when Firefox is closed.
Make sure that you do not run Firefox in Private Browsing mode.
* https://support.mozilla.com/kb/Private+Browsing
* In [[Private Browsing]] mode all cookies are session cookies that expire if that session is ended, so websites won't remember you.
* Do not use [[Clear Recent History]] to clear the "Cookies" and the "Site Preferences"
Clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
* http://kb.mozillazine.org/Cookies

When I restart the browser, its not opening the previously opened tabs even though I saved before closing the browser. Pls guide me.

Dear sir,
When I restart the browser, its not opening the previously opened tabs even though I saved before closing the browser. This problem was not there in the older versions less than 3.6.8. Even the browser speed has gone down. This is everyday problem with this browser.
Pls suggest ASAP.
Thanks & Regards,
Tripad

See this article for some suggestions: [[Firefox has just updated tab shows each time you start Firefox]]
See also http://kb.mozillazine.org/Preferences_not_saved and Preferences are not saved

HT1386 Why is it that even though I've deleted all the songs on my ipod, the songs still show up in gray letters in spite on not being able to hear them..

Why is it that even though I've deleted all the songs on my ipod, the songs still show up in gray letters in spite on not being able to hear them.

First of all, try another port on your computer. Some ports are not connected direct to the motherboard and do not recognize the iPod as well as those that are. Reset the iPod each time you connect it to another port.
Still no joy, see these.
Your Windows PC doesn't recognize iPod.
iPod appears in Windows Explorer but does not appear in iTunes.
iPod does not appear in iTunes.
Fast user switching in Windows XP is not supported.
Strange iPod behavior.
When restoring the iPod, put it into disk mode first.
Putting iPod into disk mode.

About an hour ago, I purchased Real Racing 2 from the Mac App Store for $12.99, but since then it has not downloaded one bit, even though I have a stable wifi connection. The money has already been taken from my account as well. What should I do?

About an hour ago, I purchased Real Racing 2 from the Mac App Store for $12.99, but since then it has not downloaded one bit, even though I have a stable wifi connection. The money has already been taken from my account as well. What should I do?

Just to make sure, open Mac App Store and click Purchases. Can you pause the download and restart it?

My Ipod shuffle appears in itunes on mac but not on windows 7 even though we have the latest update of itunes. We have also tried the other solutions on the apple support site.

My Ipod shuffle appears in itunes on mac but not on windows 7 even though we have the latest update of itunes. We have also tried the other solutions on the apple support site.

Hi reinkristine86!
I know you’ve said that you have tried other suggestions for troubleshooting this issue, so pardon me if you have already seen this article, but have you tried all of the troubleshooting steps listed in the article below?
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

I downloaded the Adobe free trial to convert a PDF to Word and it will not open. Further, even though I have signed in, it reverts back to the sign in page over and over and over again. How do I to convert?

I downloaded the Adobe free trial to convert a PDF to Word and it will not open. Further, even though I have signed in, it reverts back to the sign in page over and over and over again. How do I convert?

Moving this discussion to the Adobe CreatePDF forum.

Time is not correct in CME even though it is right on the router it runs from

Similar Messages

Maybe you are looking for