Time Issue not just on Alarms – camera Apps too.

I noticed that the summertime switch, which breaks some alarms not only affects the alarms. Recently on a trip to Europe, I also noticed that photos taken with Hipstamatic also don't accept the 1 hour difference. So if you take pics with the normal camera app and Hipstamatic at the same time, the Hipstamatic ones will be 1 hour out. haven't tested other apps yet.

Hello Enamic,
Time problems after the summertime change are common.
Try to move your time zone. After you're done, move the clock back one hour.
I hope this will help.

Similar Messages

My iphone 4s is restarting by itself when I just open the camera app ios 7.0.6

my iphone 4s is restarting by itself when I just open the camera app ios 7.0.6

Hi Mandy,
Check Settings>General>Restrictions, and make sure that under Allow Changes, you have "Allow Changes" checked.
Cheers,
GB

Camera Roll is not the same in Camera app vs Photos app ???

iPhone 4S issue...
I just got a new iPhone 4S. Restored from a 3GS backup.
I noticed yesterday that some of the photos that I took with the built-in Camera app aren't showing in the Camera Roll. Specifically, the last 3 pictures that I took plus a couple three other older ones. But it only happens when I view the Camera Roll through the Camera app. Using the Photos app I can see all the photos I've taken.
- When viewed from the Photos app, the "Albums" list says "Camera Roll (254)" and all photos show up.
- When I open the Camera app and click on the picture thumbnail in the bottom left and it opens the Camera Roll it says "248 of 248" at the top of the screen and I can't see my last three photos plus a couple more other older ones. They're not in the thumbnail index and I can't swipe to them from the individual photo display. Again, this is when viewing the Roll from the Camera app.
- I have no other Albums but "Camera Roll". None of the photos have been edited either.
I called Apple support and they instructed me to reboot my iPhone. This didn't change much except now the last "missing" photo shows up as the small thumbnail in the lower left of the Camera screen. But when I click to view the Camera Roll, it's still nowhere to be found (along with the other "missing" ones). The Photos app still shows all of them just fine.
What the heck is going on? It sounds like a bug to me... the Camera app and the Photos app should be pulling the same data, right?
Apple support suggested that I connect it to my Mac and do a Restore. Even if this works, it doesn't give me much confidence that it won't happen again as it seems like a bug. Should I report it?
Ben

im also having a problem on my iPhone 4 that just started today, about 100 or so photos and videos just completely disappeared.. basically it shows the last 4-5 photos that i took, and then the first 50 or so.. everything in between is gone.
when i view from the camera vs the photos app the last 4-5 differ.. so who knows *** is going on...
but if you download a program called iExplorer you can view and download everything, as all the files are still there

8.3 Is Not Just for New Camera Support

I read all through the gumph when DPReview announced that ACR8.3 was available, and decided not to bother because it only seemed to support some new camera models. But just seen a post in John Nack's blog that suggests there's a bit more to it. So in case I was not the only person missing out...
http://blogs.adobe.com/jnack/2013/11/camera-8-3-rc-for-photoshop-cc-cs6-available-on-adobe -labs.html
or
Camera 8.3 RC for Photoshop CC & CS6 available on Adobe Labs
Camera Raw 8.3 is now available as a release candidate on Adobe Labs for Photoshop CS6 and Photoshop CC on Adobe Labs. For both versions it includes the new camera support mentioned below, and for Photoshop CC includes the following new features:
Whites and Blacks now support Auto Levels-like functionality via shift-double-click on the sliders.
Separate Auto Temperature and Auto Tint feature. Shift-double-click to invoke “auto temperature” and “auto tint” separately.
Ability to option-click shortcut in Synchronize, New Preset, Save Settings, and Copy/Paste (Bridge) dialog boxes. Option-click a checkbox to check that box exclusively. Option-click again to toggle previous checkbox state.
Set the background color of the work area. Context-click outside the image in the work area to select a background color from a popup menu.

I thought I started this thread in the Photoshop forum, but I guess it might have been moved. Just my mind set, because I never browse this forum. The thing is I had people like JJ in mind who I am not sure if he will continute with the CC trial, and may just use CS6, but I hadn't thought about the extra features being for CC only.

All Time Machine dates are white, no pink. How can I be sure data is backed up on Time Capsule, not just on iMac itself?

Apple support http://support.apple.com/kb/PH4256 says "If you back up to a Time Capsule or other network disk, a message briefly appears while Time Machine connects your computer to the backup disk." When I enter Time Machine on my iMac (OS 10.6.8) I get a window entitled "Connecting to Server" and says, "connecting to backup volume" with a horizontal blue and white barber's pole. This message goes on for about 60 seconds before Time Machine opens.
Apple support goes on to say, "Gray tick marks on the timeline represent snapshots stored on your internal drive (portable computers only). Pink tick marks represent backups stored on your backup disk." All the tick marks and dates are grey and become white when mouse is rolled over them. No dates are pink.
If I have not pink dates, are my backups stored on my Time Capsule? Or, are all backups local on the iMac itself? What do I need to do to ensure backup is on the Time Capsule?

ttown wrote:
I just backed up my whole computer on an external drive with Time Machine. I wanted to clean off my old files from my computer, but I didn't want to erase them until I knew I could go back and get particular items from the back-up.
No, No, No, a thousand times, no!
Pardon the dramatics, but don't do that. Time Machine will, sooner or later, delete the backup copies of anything that's no longer on your Mac.
Plus, of course, if you delete the originals, you no longer really have backups (backup = an extra copy in case something happens to the original).
Your best bet might be to get a larger internal HD for your Mac. Second best would be to get another external HD, format it for a Mac, and move some stuff (perhaps your entire iPhoto library) to it, and let Time Machine back up both your internal HD and the new external.

Flash not working only in camera apps on iPhone 5 flashlight apps work

Led flash works only in flashlight apps but doesn't work on camera app

I have this same problem. I have tried using the flash in other apps and some work and some don't. I've restored the phone too and it's still happening.

My Camera App is gone. I just want the original camera app back, were can i get it?

I do not know how it happened but my iPhone 4 just dropped my camera App. I just want it back and can not find it in the App Store.

Your iPhone did not just drop your Camera App. Since none of the included apps can be deleted, none of the included apps are available via the iTunes app store as seperate downloads. Not necessary since it is impossible to delete any of the included apps.
Go to Settings > General > Restrictions.
Is Restrictions on?
If so, is Camera turned on as a restriction?
If yes, turn it off.

Camera app not working with logitech webcam with new windows 8.1 update

My Logitech camera app was working fine before win 8.1 update.
ALL drivers are updated.
Camera works fine when I run Logitech program/software, just won't work with camera app included win windows 8.
I just get a dark screen.
I searched forums. This appears to be a common problem. Microsoft Techs just state uninstall camera app and reinstall. But, this is an app that won't let me reinstall. Plus, I search Microsoft Store and can't find the camera app.
Any suggestions.
Thanks

I'm having more or less the same issue, but it extends beyond just the app. I'm replying here because this is the topic I was referred to by one of your support members on twitter and I'm trying to help keep things organized so that hopefully one day Microsoft
can solve the issue.
I have the Logitech Webcam HD C 525 which worked perfectly fine on my Windows Vista Home Premium machine. I recently built myself a computer and purchased Windows 8.1 complete (I heard that you could chose the OS language and as I'm living overseas I was really
happy to finally be able to use Windows in English).
I'm using Windows 8.1 64 bit and got around to installing skype on Christmas eve so I could video chat with my family back home. However, I ran into an annoying issue when trying to use the webcam. I installed the latest drivers and applications clean and straight
directly from Logitech, plugged in the webcam and it was not detected.
Following the troubleshooting info from Logitech, I then switched my camera from a USB 3.0 port to a 2.0 one, this shouldn't matter, but I tried it anyway. It changed nothing. I uninstalled and reinstalled the drivers multiple times with no change.
After a bit of reaching out on twitter I had a friend suggest using ONLY the Microsoft drivers for my device. I COMPLETELY removed and deleted the device and drivers from my machine and then installed them using the info found here in the troubleshooting section:
http://windows.microsoft.com/en-us/windows-8/camera-app-faq.
I plugged my camera back into the 2.0 port and my camera flicked on for 2 seconds (preview included) then shut off again and told me it wasn't detectable. I opened Skype and it seemed ok. When it came time to actually Skype with my family skype could no longer
detect my webcam. It flicked on and off briefly and told me it wasn't detectable.
The current state of my webcam is that it is buggy and unreliable. Opening skype or the logitech app or ANY app that uses my camera yields the same result: an endless loop of my camera flickering on and off, and messages of "not detected" between
images from my camera. The camera still works on my old computer normally, thus it is not an issue with the camera itself.
I have read many people having my same issue with various webcams (not just Logitech because I briefly considered buying a Microsoft one) and the one thing in common was it was all on Windows 8.1
As posted in a few posts above I downloaded and ran Process Monitor while I opened skype and my camera sat through the endless detect/non-detected issue it has currently. I hope I have the log information saved correctly (if not I can re-do it, it is not difficult
to reproduce as it happens all the time). I could not figure out how to copy/pase the information in the log file, so here is a link to my log file:
https://drive.google.com/file/d/0BznPyE0dem06eVJWRWdFVllhQTQ

Camera App - Not Working "error.4003"

I am receiving the error.4003 for the camera app. This affects both camera and video modes. The front facing camera does not work through the camera app, but works fine if used via the video chat app. This appears to be a software error as the touch screen interface controls in the camera app are not completely functional or have a severe response time lag as compared to normal touch screen response time.
Apparently worked fine a month ago. Pictures taken looked great.
At first the error message received on the camera app stated camera was already in use. Not the error above is all I get.
I've done research via the Web and the only responses thus far is to send this into RIM. But too many people are experiencing this error and the posted ideas on other forums are either questionable or IMO not acceptable.
Also the screen capture cameramode works fine. No problems.

From everything I hear 4003 is a "hardware" malfunction.
It happened to me as well right AFTER the 1032 OS upgrade - how's that possible>?
Probably blows a resister or something.
I had warranty left -and got a brand new Playbook in return this week. The turnaround took only a few days by FedEx.
Why so fast? It can't be fixed - so they're just tossing the old ones and replacing them.
I received a brand new identical model (32g) - however it wanted to go to the 1032 upgrade step during intial setup.
i was hoping to avoid that. Did it anyway - no choice.
Happy to report - cameras are both working.
NO explanation of the hardware fault by RIM - what it is or what causes it.
If you have warranty - just call support. They're breaking it somehow - it's not YOU!
Get it replaced before your warranty runs out.
TL

Can I clear all the history for a selected site like CNN, not just one "reference" at a time for CNN

I want to be able to clear certain parts of history. Not all of it for a time, and not just one "entry" at a time. For example: I have lots of entries in history for CNN or ESPN website. Can i remove all of the CNN entries at one time? Clearing it in that kind of grouping. I hope this is clear I am not so good with computer lingo. Thanks

You can also use a colon (:) that is present to specify the protocol in the search bar.
In the site bar you can sort by visited date and in the library you can click a column header (e.g. location) to the the history items.
Note that you can copy (drag/drop) history items to a bookmarks folder to save (preserve) them as bookmarks.
You would need to use a place: query and create a so called smart folder to have more control.
*https://developer.mozilla.org/en/Places_query_URIs

I am sorry, this is like talking to a brick wall. I have a few issues and just not one restricted to

This is like talking to a brick wall. I have a few issues not just one or two. I need to talk and explain these on a one to one basis and not expose and sprawl all over!

http://www.adobe.com/support/chat/ivrchat.html
http://www.adobe.com/support/download-install/supportinfo/

Can not sign in to YouTube app on my iPhone 4s

Tried every thing

You're not addressing Apple.
This is a user to user technical support forum. Apple does not monitor these forums.
IF it were an Apple issue, there would be hundreds of postings about the issue, not just yours.
The more likely issue is either you entered the incorrect credentials or there is an issue with your account.

Can not sign in to YouTube app on iPhone 4s

I used my gmail account correct password but it says that it's still wrong I use the same password to log on to google.

You're not addressing Apple.
This is a user to user technical support forum. Apple does not monitor these forums.
IF it were an Apple issue, there would be hundreds of postings about the issue, not just yours.
The more likely issue is either you entered the incorrect credentials or there is an issue with your account.

Hello, my iphone 5s fell, thereafter i tried taking a picture, the camera app just shows a black screen and hangs, the front camera works on other apps but the rear camera is not working, all other apps work perfectly well, how do i resolve this

Hello, my iphone 5s fell, thereafter i tried taking a picture, the camera app just shows a black screen and hangs, the front camera works on other apps (such as facetime and skype) but the rear camera is not working, all other apps work perfectly well, how do i resolve this

Double tap Home button and delete Camera app from multitask-list.
Do a
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data
If problem persist, make an appointment with genius bar for evaluation.

Recently my MacBookPro locked up on startup. Could not get past a certain point of progress bar. I had upgraded to Yosemite few weeks back, with no issues. I ended up doing a Recovery with Time Machine and I got all my apps, photos, documents, etc. back o

Recently my MacBookPro locked up on startup. Could not get past a certain point of progress bar. I had upgraded to Yosemite few weeks back, with no issues. I ended up doing a Recovery with Time Machine and I got all my apps, photos, documents, etc. back okay --- except I got error messages that my "registration for Photoshop (I use CS4 Extended) and Photo Mechanic are no longer working". I worked on Photoshop first, and tried (several times) to fix it with their online help suggestions. Nothing worked.
Is there a simpler way to "get my licenses/registrations back"??? I am also going to contact Camera Bits about the Photo Mechanic issues. Thanks

Same problem and for months now. I haven't been able to find a solution, but I suspect that's because I don't know exactly what's wrong.

Time Issue not just on Alarms – camera Apps too.

Similar Messages

Maybe you are looking for