Time labels in Week View

I just upgraded to Leopard and have a question about the iCal display in Week View. In prior iCal versions, there was a left-hand column showing the time represented by each horizontal line (e.g., 8 AM, 9 AM, etc.). Now, I only see "Noon"; the other lines have no label. I find it hard to orient, where in the prior versions, it was easy to see where times were and where to place a new scheduling item. I have not been able to find a "Preferences" option to restore this display. Am I missing a setting, or is this feature gone in iCal 3?

Margaret,
I believe that your problem stems from user settings that you can set up/change in International Preferences.
Quit iCal, Open System Preferences...>International>Formats>
Choose Customize...>Dates/Times>Show> and change each entry (Short/Medium/Long/Full) to match your desires/requrements.
Restart iCal and check for your changes.
Good Luck.
;~)

Similar Messages

How to lose time stamp in weekly view

In iCal 7.0 using OSX, can't get rid of the time in the weekly view. I don't see it in monthly view, but in the weekly which is what I use every day, the time takes up so much room that to see the event info I have to add another line and make the event seem to take up more time than it does. Is it possible to get rid of it? The info I saw on this forum doesn't seem to be valid any more.

Hi Rajesh,
I do not think you can see the long timestamp from RWB but from SXMB_MONI you can enter the message and double click on PerformanceHeader, there you will see the timestamp of different steps of the message in the integration engine.
Regards,
Sergio

Can't visualize the time on the weekly view on ical

Can anyone help me out, I can't see the times on the left of the ical panel in the weekly view and I can't seem to change this in preferences. Has anyone had this problem?

I have a similar problem, have endured several calls to apple care, two trips into the genius bar, had 2 computers rebuilt and after all that, the first sync with MobileMe restored the problem. My profile/preferences only recognises the hour 5:00AM and the hour markers on the day view and week view all say Sat AM, Sat PM in every hour. Please help. This is driving me crazy. I'm pretty sure it has to do with Preferences. If I create another account, iCal is fine on that account.

Show times in printed week view

Hey everyone!
I am a student at a universty in Belgium, Europe and I always print my weekly schedules with iCal. For I always print my schedule in a 5-days week view, the printed schedule doesn't show any start nor end times. But since my lessons start and end at rather odd times (like 10.25AM or 12.35PM), it's rather hard to deduct these exact times from the printed sheet. So I always print my schedule twice; once in list view for the exact times, and once in week view for a better view on the gaps between my lessons, which is rather unpractical.
Is there any way to show the start and end times in week view when I print it?
Greets and thanks in advance,
Gert Milis.

Never use "Timezone support"; Settings/MailContactsCalendars/Calendars.
When the settings are correct in the event, and not corresponding in the display:
Do a "reset": hold the Power Button and the Home Button at the same time, keep holding, when you see the white apple logo appear, let go and let the 5s start.

Time format in week view

Hi all,
There are 2 machines here in the office, my Powerbook G4 and a PowerMac G4. On the Powerbook, the week view in iCal has 24 hour times, but on the PowerMac it has 12 hour times.
Both machines are using iCal 1.5.5
Any idea how we can change the 12 hour times to 24?

Margaret,
I believe that your problem stems from user settings that you can set up/change in International Preferences.
Quit iCal, Open System Preferences...>International>Formats>
Choose Customize...>Dates/Times>Show> and change each entry (Short/Medium/Long/Full) to match your desires/requrements.
Restart iCal and check for your changes.
Good Luck.
;~)

How can I stop iCal from printing an appointment time posted in week view but printed in month view?

While I keep my calendar in weekly format, I also want to print a single-page monthly calendar. But repeating the time of day in the monthly format takes up space. Is there a solution?

I wish that I was replying with a solution. Alas, I am not. I am writing to commiserate. This issue is driving me and my husband (to whom all of the useless email notifications are being sent) completely bonkers.
Help! Anyone?
Anyone?

Iphone calendar displaying wrong times in day/week view

I work a lot of night shifts and consequently I input a lot of night shifts to my iphone calendar. They usually work. However, in a couple of weekends time I have some nights which I have input as starting on 30th march 20.45 ending 31st march 08.00, but are showing as starting 30th march 8am ending 20.45!30th march in any of the graphic views. In the event the times and dates are correct
I've tried deleting and reinputting, tinkering with the time zone and more but nothing is working and it's driving me spare!
Suggestions please!

Never use "Timezone support"; Settings/MailContactsCalendars/Calendars.
When the settings are correct in the event, and not corresponding in the display:
Do a "reset": hold the Power Button and the Home Button at the same time, keep holding, when you see the white apple logo appear, let go and let the 5s start.

ICal "week view" question

Is it possible to advance one day at a time in the "week" view mode in iCal? I can only advance one week at a time.
I have my week starting day set to "Monday," but I sometimes want to be able to see events over a long weekend (from, say, Friday to Monday) or another period of time that doesn't begin on Monday and end on Sunday. In those cases, I have to either go to "month" view or reset my week start day in the preferences. Palm Desktop allows me to advance one day at a time while in week view, a feature I didn't know I was giving up when I converted to iCal.
Powerbook G4 Mac OS X (10.4.6)

John,
I agree with Todd.
;~)

Times not shown in weekly view

My iCal always used to show the times within the weekly blue "event" rectangles, but these seem to have disappeared recently. The events are still in the right place and given in the extended panel.
How do I get these times back in the main display, please?
The preferences allow for showing times in monthly view but not in weekly.
MacOSX 10.4.9, iCal 2.0.5

Hi John,
You should be able to set iCal so you can see the start times in month view. I can't remember exactly what it says in 10.3, but go to the iCal menu then Preferences and it should be in there.
Best wishes
John M

ICal Week view, Date is not aligned with the Time(schedule) of each date

Well, just like it says over there (`` ). I've recently been to China for a business trip, and I suppose the different time zone may have had something to do with the problem. Now I'm back home, changed the time zone back to normal, still the iCal shows in the weekly view that the Date on the above is not aligning with the Time and schedule. Any suggetions would be grateful!!!

Hi,
i omit the scheduling maergin key in material master,
the result of MRP is
BASIC DATES
Finish 15.10.2009
Start 14.10.2009
PRODUCTION DATES
15.02.2010 14:33:25
14.10.2009 07:00:00
scheduling type i planned order is still "backwards"
so in MD04 it is say that the goods is available at 15.10.2009 same with requirement dates.
this seem not right.
it seems that order finish date is not adjusted by lead time scheduling on "today scheduling".
Is there a way so order finish date is adjusted by lead time scheduling on "today scheduling" ????
Best regards,
Freddy Ha
Edited by: Freddy Halim on Oct 14, 2009 10:01 AM

Publishing Ical in weekly view with start time I want

I have my Ical set up to start at 11am and end at 9pm. When I publish my calendar it still shows start time at 7am on weekly view. How do I publish my Ical with the start and end times I want?
Thanks

epee91,
What setting do you have in System Preferences...>Language & Region>First day of week:?

Seeing times in day and week view

Is it possible to see times (eg 7.00am, 7.30am, 8.00am, 8.30am, 9.00am, etc etc) along the y axis in day and week view of iCal? I can only see actual times when I in the process of making appointments, ie when wiping my cursor over a section of the page.
johnC

See Fred Grieve's answer and John Maisey's solution here:
http://discussions.apple.com/thread.jspa?threadID=1868347&tstart=0

Is it possible to have Clock in and clock out times in weekly view

Hi,
We have Daily View and Weekly View in Record Working Time iview in ESS.We can set the Clock in and Clock out times in Daily view if we check the With Clock Times checkbox in Data Entry Profile.But we want to have same Clock in and Clock out in Weekly view without any developement.
If it not possible thru config how much will be the Development Effort
Thanks
Bala Duvvuri

Siddharth,
can you please elaborate this
Thanks
Bala Duvvuri

CATS webdynpro Java - working times in weekly view

Hi Team
1. Start & end time in Weekly view : Requirement is to allow shift planning employees to enter their working times in weekly view itslef. But as I had discovered that it is possible to enter it only in dailuy view of webdynpro Java application in ERP 6.0.
I came across a better Webdynpro ABAP application which exactly fits the requirement but it is part of EHP5, getting a mini upgrade for one application was also rejected. is it possible to implement in a short period of time without great impact ..anybody experienced on this?
http://help.sap.com/erp2005_ehp_05/helpdata/EN/30/e67780e37f4f5a90105a9e9205660f/frameset.htm
So I am again back to finding way to enhance the weekly view.I read all teh therads...didnt find anyone successful
2. Default Attendance type & target hours & start & end times from Infotypes : CATS0002 exit is called only when we go to next step ,is there any other way to default as soon as CATS screen is loaded ?
Any help would be greatly appreciated & rewarded.
Thanks
Edited by: Nidhi Guglani on Mar 10, 2011 5:17 PM
Edited by: Nidhi Guglani on Mar 14, 2011 12:10 PM

Hi Suresh,
Thanks for your valuable inputs. I went and looked into the java file and found bit different.I dont see how they are getting the column headers like Saturday,Sunday,Monday...
Basically I need to keep one 'Submit' button on top of my table and on click, it should populate 8 hrs in the correspounding column.For eg. if its monday, it should default 8 hrs in monday column so that user dont have to manually type it in and also save these working hrs in the backend system without further click on 'Save' or 'Review'.
I still need to check with the ABAPers regading the user exit.
Also, Is it possible if I create a custom webdynpro application where I can use a BAPI that takes in the current day from my webdynpro and update the cats database and send an export parameter with success or error message.
Thanks
Anjana

How do I print weekly view with times?

I'd like to have the time listed by each event when I print a calendar in weekly view. Right now the times are along the left side of the page only. Any ideas?

Hi mosswood 17
Welcome to the Community
If you already have your backup there are many free software available who can read ,extract any ipd file like :
MagicBerry from Mena step or ABC Amber BlackBerry Converter and many more.
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Time labels in Week View

Similar Messages

Maybe you are looking for