Time laps effect

I have 24 hours of footage outside a window with a beautiful view. i want to time laps this into about 2 and half minutes, can this be done with FCE4?????

Yes...
place into time line and adjust speed of clip...i would have thought!!
Any ideas?
Justin... Durban.. South Africa

Similar Messages

How do I save a photo sequence (time lap) in HD 1080p?

I made a time lap in iMovie and then brought the project to final cut x for fine tuning.
after that, I can't find a way to render my movie at 1080p res even when I choose AppleProRes format.
In iMovie it's easy, i just need to choose export as 1080p HD movie and done!
What Shell I do?
Thanks for the help!

FCP X is not iMovie. FCP X assumes your Timeline is the resolution you plan to output. It seems your Project is smaller than 1080, which means output to 1080 will cause you to lose resolution and look bad. Use Compressor to up-rez footage. You'll still lose resolution, but you'll lose less resolution.

Time Warp Effects in Premiere Pro CS6

Enabled Time Warp Effects in Premiere CS6: Ctrl+F12, TimeWarpFilterEnabled > true.
http://translate.google.ru/translate?sl=ru&tl=en&js=n&prev=_t&hl=ru&ie=UTF-8&eotf=1&u=http %3A%2F%2Fwww.efxi.ru%2Fmore%2Fpremiere_pro_cs6_time_warp.html

Works on my Android Nexus 7.
Anyway, here it is:
Turning Time Warp effect
Consider the example of the inclusion of qualitative change speed with the aid of the Time Warp (creating the effect of "stretching" the time or time warp) in the program Adobe Premiere Pro CS6. As we all know by default, this effect has been disabled in the version of Adobe Premiere Pro CS5, but you can turn it on. Press the keyboard shortcut: Ctrl + F12 and panel Console, switches to Debug Database View:
Paragraph TimeWarpFilterEnabled instead of trying to drive a false true. Restarting the program Adobe Premiere Pro CS6.

Can I make a time lapse effect from video footage?

Is there a way to easily create a time lapse effect from video footage in Final Cut Pro 7?
I have hours of footage - too many hours to just do speed changes.
Is there a way to automatically grab a frame and hold it for a half second or so every 30 seconds?
Thanks,
LD

Lynn Diana wrote:
Is there a way to easily create a time lapse effect from video footage in Final Cut Pro 7?
Depends what you mean by "easily".
I have hours of footage - too many hours to just do speed changes.
I think doing via speed changing may be the easiest way to do this. Once the footage is ingested, get it to the timeline and do your speed up. At least this gives you the option of trying different speeds to get the effect you want, and the option to vary the speed as needed.
Is there a way to automatically grab a frame and hold it for a half second or so every 30 seconds?
Yes, but it somewhat complex. You need to buy an app from the app store called SnapMotion 2 (which I think is around $3.99).
https://itunes.apple.com/us/app/snapmotion/id548959270
SnapMotion allows you to take a video a file and pull still frames at interval you specify and in the format a frame size you choose, and save them as individual images.
So you would set up the interval you want (say 30 seconds) and SnapMotion will go through the file and pull an image every 30 seconds. You would need to do that to all your files.
(I have never done this with a file that was longer than 10 minutes, so you should check with the developer and see if it will work with very long - multi hour - clips).
Once you have all your pulled stills, then open QuickTime Player 7 and import the still images as an image sequence.
Once you have the image sequence built in QuickTime, export it in the codec you want to use in FCP.
MtD

Dots on screen instread of time laps bar

I've had my ipod namo for 5 months now and it has worked fine. I turned on my ipod the other day and i notesed that the volume bar or the time laps bar was not showing. Instead only 5 hollow white dots apear. I can still adjust the volume and track scroll but i cant see the levels or time. Anyone have any suggestions or the same problem? Thanks so much.
Powerbook G4 Mac OS X (10.3.9)

The five dots is the rating screen. You should be able to use the center button to scroll through the various screens. However, there is a known issue with the latest updater 1.1 that causes the screen to get stuck on ratings.
Click here for more info.

Regarding Time Lapes in CS5

I have a few questions that I hope can be answered here. The first is: When starting a new Sequence what do you choose if you are making a time lapes? I don't see anything that lends it self to it. I've just been choosing DSRL 720p24 and it seems to work. Another problem I'vee been having is how do you lock all your images together if you want to move them? Like for instace if you don't want it centered? I did one of the sea but the sea is cut off on the bottom, I selected all and moved the frame down but only moves the one frame I am on. Finally, what about encoding? If I want to encode it as a quicktime file what are the settings?

I did a bunch of timelapse testing with a Canon 1DmkIV this summer when making this home movie: http://www.vimeo.com/14647401
This is my workflow:
Record each timelapse sequence to it's own folder on the card in-camera.
Open the first image of the sequence in Adobe RAW using Bridge. Apply any colour correction/image manipulation in RAW as well as cropping the image to the ASPECT (not resolution) that I want to work on (in my case 16:9).
In Bridge, right click the image you've manipulated, copy the RAW settings and then apply them to the rest of the images in the sequence (all these changes are non destructive, it's all just been metadata up until now). At this point I archive the original files to BluRay ROM so the new metadata is archived along with the image.
Once the settings are applied, drag the files to EXPORT TO DISK in Bridge and set the resolution for export (in my case 1920x1080) with maximum quality.
Last step is to open Quicktime Pro, open the image sequence and save it as a QT movie. At this point you set your frame rate (in my case 23.976). From this point I drop the QT's into a Premiere bin.
It is possible to open a series of still photos in Premiere as sequencial images and skip the Quicktime step but my RAID starts chugging when I do this (5 disk, RAID-0 that plays back 4K R3D and 220Mb/s HD MXF's without a problem). For $20 it was worth the upgrade to QT Pro and the extra step saves a lot of grief later.
This is just my workflow, not the bible on how to do it. Hope it helps.

Cs4: Time warp effect - black playback problem

I use premiere cs4. When i drag clip into time line (1440 25i mpeg transcoded from avchd 1080 50i) onto time line and apply time warp effect and after rendering clip is black during playback, simply nothing in it just black picture with the same duration as original footage.
core2duo 2,0 2mb cache
2 gb ram ddr
nvidia geforce 8400m gs 128mb cuda drivers installed. ( do premiere cs4 use cuda drivers?)
vista 32 bit
what 's wrong? what to do?
please

Hi!
No, the first frame is not black.. The screenshots where just examples and I tried to adjust the settings, because the first time I tried the timewarp it worked, but the next clip I wanted to warp just got black.. and I tried alot of times to figur out if I adjusted some of the settings.. ( I hope you mean the method and adjust time).
Those comes adjusted in pixel motion and Speed and thats what I have them on now.. Should I adjust it to something else?

Time Code Effect Source Monitor and rendered .AVI movie display different timings???

Im seeing a strange error and hope someone might be able to help me out. I am shooting elementary classroom reading lessons for a study by the University of Michigans School of Education. It is important to the study to see what takes place over about a 2hour period of time.
Im shooting with 2 cameras. 1 on the teacher the other on the students. Im shooting on mini DV. The first camera I start about 4min ahead of the second so that when the 1hour tape is filled I can switch the tape in camera 1 while still capturing activity on camera 2.
When I edit the footage I am cutting back and forth between the 2 cameras. One initial shot is of the classroom clock as it ticks from one minute to the next. I later use this footage as a guide when establishing the Time of Day.
When the entire lesson is edited together and cut. I add two transparent video tracks each with the Timecode effect added. The first I synchronize with the classroom clocksetting the Timecode Source to Generate matching the Starting Timecode with the clock footage. I then crop the frames portion so viewers will know the time of day the footage was shot. The other I leave the Timecode Source set as Clip. I use the size and position controls to move the two timers into the upper left of the screen.
When I view the finished video in the Program Monitor everything looks great. When I Export|Movie to an .AVI file the video looks correct but the timers are off. The last frame of the video in the Source Monitor displays 11:28:19 for the clock timer and 02;02;00;23 for the total time timer. But when I view the .AVI the last frame displays 11;03;40 for the clock and 01;37;36;25 for the total time.
So how did I lose 24min between the Source Monitor displays and the rendered .AVI displays?

Yes. After I had the .AVI I ran through the two side-by-side (.avi and the Source Monitor). I have since experimented with some of the Time Code effect settings trying to see if these might have some impact. I have not been able to find any detailed explanation of what each setting controls/does other than an overview (see link below).
I suspect that this has something to do with the size/length of the clip 2+ hours. Is there an optimal length for an individual clip? Should I be splitting this into 2 or 3 shorter sequences and then putting them on a DVD with Encore and setting it up to play them back-to-back?
http://livedocs.adobe.com/en_US/PremierePro/3.0/help.html?content=WS4AE872FF-BC0F-45e8-AD8 0-C2784D17CDFE.html

Fast forward time stretch effect / blurring / MOV

Hello friends,
So I did an entire 3 minute video using a time stretch effect (fast forwarding, time elapse) to match a voice over.
I saved it out as FLV so that the client could proof it. All was good so I wanted to provide an MOV file in H264 to increase quality / make Apple compatible for You Tube viewing.
When I did, the FF time stretch video really blurred and pixelated in the video.
Does anyone have a suggestion for a codec or something that might reduce the amount of dragging / pixelation / bluriness? (That of course has high quality)
Video was shot using a Canon Vixia HFS30.
Thanks in advance!

Hi Bill, Steve,
I'm hoping you can shed some light now that I can actually show you what the issue is here with the fast forward motion effect. I've put two files I've uploaded below. Same issue on both.
The fast forward effect is on from 0:00 - 0:45
Quiktime, H264 -
http://youtu.be/Vs7u0kQ0hVQ
Also, can you tell me why the MOV files don't seem to fill the frame?
Flash, FLV
http://youtu.be/lfnci6Enxkk
As you can see, the higher you set the resolution, the more pixelated I become.
Any help you can offer is appreciated.
Thanks

Will the Time Warp effect be eventually included back?

Dear anybody on behalf of Adobe Systems Inc.,
would you be so kind to give a clear answer if the Time Warp effect will be included into Premiere Pro back?
I've just started Premiere Pro CS5 exploration and realise that it's TOO early to switch to. And one of the reason is the Time Warp effect abscence...
I rummaged plenty of Internet pages but was unable to find unambiguous answer 'Yes' or 'No'...
Changing just clip speed gives quite a poor result (first and foremost I mean a movie look).
Discussions about product advantages in general have little sense if it doesn't provide high quality output.
No one of viewers is interested in if I was enjoying with a software while I was composing unprofessional looking film...
Thanks forward

function(){return A.apply(null,[this].concat($A(arguments)))}
Todd_Kopriva wrote:
> 1. The official feature-request/bug-report form DOES NOT provide Adobe feedback...
That's not a good assumption.
Well, let's have a look at the form itself: http://https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
It says (quote):
function(){return A.apply(null,[this].concat($A(arguments)))}
We normally do not send personal replies to feature requests or bug reports.
Having read those words, I should assume I would obviously get the answer on my question, won't it?
ON BALANCE (too many mere words have already been said...).
The Time Warp effect will NEVER be included back into Premiere Pro - it was deliberate marketing decision to exclude it.
Thanks for your time

Videos on my imac that played before do not play now, what happened, time laps on videos are all set to zero!

videos on my imac that played before do not play now, what happened, time laps on videos are all set to zero!

I am up to date with u/d and dont think it has anything to do with iphone. these videos worked on my mac plenty of time but now they dont! the time laps for remaining times for videos are all set to zero.

KE80 report two times value effected

Hi Experts,
I have one issues regarding MIS report Thru KE80 , in this report we have pass the one Entry of Rs. 10,500/-
Accounting Entry is
40 Depreciation M            A/c 400100               Debit 10,000    Cost Center F200 i.e Finance (Cost Element Expenses)
50 MIS PROV -Reversible A/c    100100             Credit 10,000     Balance Sheet Item no Cost Element
IN my MIS Report two times effect cause of given Cost Center F200, how can we adjust 10,000/- remove from Sustaning Cost coz Depreciation GL n bottom effected same amount. i.e Right. but as i configured to capture the cost FI200 for Sustaining cost .. this is Problem happening. kindly help me.
A. Revenue   : Relevent GL      1,00,000/-
B. Material Cost Relevent GL    50,000/-
1 .Manpower      : Relevent GL       10,000/-
2. Energy          : Relevent GL         3,000/-
3.Cosumables    : Relevent GL        2,000/-
C. Conversion Cost (1+2+3)   =   15,000/-
D. Development Cost :                2000/- those cost which is related with Engineering Cost Center i.e EN100 should be show.( I have made and assign) I have Made KCH1 group Development Cost
E . Sustaining Cost                 = 10,000/- same like above here we have to capture Cost Center FI100 i.e Finance, HR100, Marketing MK100 & Assign
F .Profit (A-B-C-D-E)     : 13,000/- But Profit should be 23,000/- coz F200 two times showing.. wht should i do in this case.
now
G. Depreciation :         10,500 Relevent GL i.e 400100Cost Center F200
H. Finance Cost:              1000/-
I. Other Income :               1000/-
PBT :   (F-G-H-I) : Only 500/- PBT while ( 10,000 effect Depreciation)
Yr quick action will be Highly appreciated.
Hope u understand the scenarios.
Kind regards
Pranav Kr. Gupta
SAP FICO Consultant

Fuskie-
The way I understand it:
    When the data source is a stored procedure, CR will execute it so if the stored procedure has any
    parameters, it will prompt for them. These parameters are in the stored procedure side. Then, if you
    have additional parameters in the Crystal Report itself, you are going to be asked to input those too.
    This will cause "double prompting".
RS

Timer & Fade effect

One more question then I'm done for the day.
I'm using a timer to change the index on my combobox (I'm sure there's a better way but its working) which is pulling slide data from an XML file. I would like to crossfade between slides. Is see there is a spark fade, but I'm unsure how to apply it to each element to work with the timer.
Timer code:
private var timer:Timer;
private function init():void
    timer = new Timer(5000);
    timer.addEventListener(TimerEvent.TIMER, onTimer);
    timer.start();
private function onTimer(evt:TimerEvent):void
    var idx:uint = dropDownList.selectedIndex;
    var max:uint = dropDownList.dataProvider.length;
    var newIdx:uint = ++idx % max;
    dropDownList.selectedIndex = newIdx;
The comboBox (yes, it used to be a drop down list)
<mx:ComboBox editable="true"
    x="10" y="10"
    id="dropDownList"
    creationComplete="dropDownList_creationCompleteHandler(event)"
    dataProvider="{getSlidesResult.lastResult}"
    labelField="number"
    visible="false" />
The items that need to have the fade effect are mx:Text, s:TextArea, mx:Image, & s:VideoPlayer. Each has a unique ID.

Hi,
There are many ways you can crossfade with flex 4 I have thrown together a small example that uses a pixelbender filter to fade images and an included
a very simple text cross fade (no timers necessary). Using parallel transitions you can acheive quite a lot.
http://ezflex.net/fader/
David.

Will partitioning Time Capsule effect my backups?

If I have a 1TB drive and partitioned it 500GB for Time Machine and 500GB for drag&drop, can this have a negative effect on my Time Machine backups?

No, other than limiting the amount of data that can be stored in the Time Machine backups.
However, it is a challenging task to partition the drive on a Time Capsule in a traditional way, since you must pull the drive from the Time Capsule......voiding the warranty on the Time Capsule.....to perform the partitioning operation.
You might want to set up a 500 GB disk image on the Time Capsule drive using Disk Utility on your Mac for your drag and drop storage, then leave the drive "as is", since Time Machine must back up directly to the Time Capsule drive.

Time Machine: Effect sound missing

Hi,
I actually lost the ''space sound'' effects of the Time Machine application. I hear nothing when:
I switch from Mac osx to Time Machine.
I browse my restore data.
thanks for helping me

Ha! Ha! Maybe it was H_ector's brother making that +space sound+ behind H_ector whenever he click on the Time Machine icon! Except he wasn't around the last time TM was activated. Actually, I wouldn't blame someone if they started to make +space sounds+ just from watching the TM blackhole effect!
Regardless, no +space sound+ here, either. And I cranked up the volume, too! The only sound I heard was my Time Capsule wake up.
Wait a minute... I'm willing to bet H_ector's external HDD is making a +space sound+ each time TM is opened.
H_ector, what do you think? If I'm right, I should get a star!

Time laps effect

Similar Messages

Maybe you are looking for