Time limit is not working correctly
I'm using a dot-connection task in which my participants have to complete a picture by 'drawing' a line with the mouse to connect numbered dots. They get a time limit of 10 seconds to do this; and they have to do it with three different pictures, so the script is repeated two times with different pictures.
However, very often the program stops drawing the line after about 5 seconds. So, the picture is visible for the full 10 seconds and the little clock showing the remaining time also counts down these 10 seconds, but the mouse just doesn't leave a line anymore after a couple of seconds.
This does not happen every time, sometimes it does work for the whole ten seconds. Sometimes, it even works for the first picture, but not for the other two, for example, although the script should be completely the same, since it is just repeated.
It seems to me that it is completely random at which try it works and at which it doesn't; does anyone know what is going on?
Thank you!!
You have enough syncpoint() and syncwait(0.01) statements in your script?
Johann Fouché
eLearning Solutions Architect
Description: jfmm logo
+27 82 853 1010
<http://www.jfmultimedia.co.za/> http://www.jfmultimedia.co.za
Skype: johann.fouche
Similar Messages
-
Some time tech pad not working correctly
I am buy a HP Pavilion laptop from awok.com. Some time mouse teach pad not working correctly some time open windows 8.1 time bar and some time i am using mouse teach pad then automaticly come right click popup menu coming some time i am try to scrol the page using mouse pad then automaticly Select all from the page so please help me
Hello @BABUMON ,
Thank you for visiting the HP Support Forums and Welcome. I have read about your HP Notebook and mouse freezing. Here is a document on how to troubleshoot the mouse and Touchpad sensitivities.
If you will go to the section on Adjusting TouchPad or ClickPad pointing sensitivities it should help resolve the issue.
I would be happy to assist if needed as there are many models of HP Notebooks, I would need the model number.
How Do I Find My Model Number or Product Number?
Please respond with which Operating System you are running:
Which Windows Operating System am I running?
Please let me know.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
NY Times print feature not working correctly
Windows 7, Firefox 3.6.3. When I go tothe www.nytimes.com site, and read an article, I like to read the article as one long piece. Thus, I used to click the print feature on the article and go to a new page that allowed the page to be read like a pdf file, and when I enlarged the type it would increase proportionally. Lately nothing happens when I click on the print feature. That is for most articles. Yet, for a very few the feature works. The NY Times customer service person thinks the issue is with Firefox settings. The feature does in fact work with IE 8.0.
== This happened ==
Every time Firefox opened
== A few weeks ago.just wanted to follow up on this post. It turns out I had picked up virus and/or other malicious software along the way. Stopped by to my friends at Malewarebytes and they fixed me up. Touch pad works perfectly now. Chow!
L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit -
Help - EXIF time and date not working correctly
I am a long time Lightroom user and am trying out Aperture 2.1. I like it a lot but I just found a serious problem. I'm importing some old photos into my Aperture library, by referencing the files in an existing folder. The time and date for some of the files gets messed up. When I view these files in LR the time and date is fine. When I look at the "date created" in the Finder, the time is also messed up. For a photo shoot I did in Europe, the time for some images has the right date & time when converted to US time, but for some images it has the right date & time but as if it were in the US time zone. The files are all Nikon NEFs.
Also, when I view the files in the Aperture import dialog box they are in the right order. But when they get imported and I'm looking at them in Aperture they are in the wrong order.OK, I give up. Turns out that after one successful import where the dates were ok, subsequent imports have the dates messed up again - whether in Quick or Normal mode. I also tried importing to a new collection, and also tried importing after rebuilding the library (via command-option click in the dock). Still hving this problem.
-
Hi
My time machine hard drive has stopped working after the latest update and the Disk Utilities says,:
Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files."
How can I back up my files before reformatting when I can't even open the drive's folder?
Thanks for the help.I think my time machine is not working correctly and I dont know how to get it back... I really need to get back my photos!!!!!
Exactly this was the way I USED to make restores of files and photos..
but know I CANT!!!!
When I am inside iPhoto y click on the Time Machine icon at the Dock and it goes to this...
at my right side there are the backups but when i click them nothing happens they are like NOT CLICKABLE...
PLEASEE!!! Help me!! -
[Window Title]
Microsoft Windows
[Main Instruction]
iTunes has stopped working
[Content]
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
[Close program]
This is what I got... sorry, not very tech savvy to copy the error message onto here...
Have tried uninstalled and re-installed iTune, updated the new version of 10.6... many times over still not working!!!
I share the frustrations of many here. HELP!!!!!Hi there Nok Saensanoh,
I would recommend taking a look at the troubleshooting steps found in the article below.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
-Griff W. -
Email pushing not working correctly for office email - 3 seperate devices/carriers
We switched email hosts several months ago and since our email pushing has not worked correctly. Our host/IT guy has been very unwilling to help me through this (I get the pleasure of being the in-house IT source)
I personally am on AT&T have no problems with the other 3 emails I have set up on my blackberry. However I receive my work account one time a day at roughly 6:15. Another user is on Alltel and he receives spotty emails throughout the day, but his gmail account comes through instantly. The third user is on nextel and he receives his 2-3 times per day.
I began to think this was an email host issue since the three of us are all on different carriers, until I found out a fourth user, also on nextel, receives his emails fine.
Users 1-3 are on Outlook 07 on various versions of the Curve. We have all our messages to stay on the server.
User 4 is on the older nextel blackberry push to talk, and is not on outlook.
We do not have an exchange server. Our emails were all set up through our devices.
Any suggestions? The answers I have received through our carriers is to make sure that our messages are set to be left on the server. Everyone else at the office has given up - but for me this is the quest for the Holy Grail.......I'm determined find the answer!
Thank you in advance for any suggestions.
Caitlin TalbotPotential solution for windows for a side-by-side install. This works for me.
To setup a firefox install side by side so that links from external programs (like email) can open (so you don't get a "Firefox is already running but is not responding" message) do the following.
The solution entails the use of the -no-remote switch. Don't use it for the default browser. Use it for the non default browser.
I'll use firefox 3.6 and firefox 4.0 as examples but this should work for future versions.
+ Install firefox 3.6 and Firefox 4.0 in different directories. Eg.
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Program Files\Mozilla Firefox 4\firefox.exe
+ Open profile manager. Start > Run : firefox.exe -ProfileManager
+ In profile manager create Two Profiles.
firefox3.6
firefox4
+ In profile manager select firefox 4 as your default (assuming you want to default to the latest) and tick "Don't ask at startup"
+ Create two windows shortcuts.
* General: Mozilla Firefox 4 (default). Shortcut > Target: "C:\Program Files\Mozilla Firefox 4\firefox.exe". Shortcut > Start In: "C:\Program Files\Mozilla Firefox 4"
* General: Mozilla Firefox 3.6. Shortcut > Target: "C:\Program Files\Mozilla Firefox\firefox.exe" -p firefox3.6 -no-remote. Shortcut > Start In: "C:\Program Files\Mozilla Firefox"
That's it. Links from external programs should now open in your default browser.
Further details see. [http://kb.mozillazine.org/Opening_a_new_instance_of_your_Mozilla_application_with_another_profile Opening a new instance of your Mozilla application with another profile] -
LaserJet Pr0 200 color MFP M276nw Touch Screen not Working correctly
Hello, I'm having an issue with a LaserJet Pr0 200 color MFP M276nw Touch Screen not Working correctly. I have followed the instructions to reset the printer, but now am unable to select 'English' as my language because every time I select the 'English' option 'Spanish' is selected. I am then given two options to select 'Si' or 'No' both of which can not be selected on the touch screen?
Anybody know of a way round this?Hi @dnhowes ,
I see that you are having issues with the touch screen not working correctly. I will do my best to help you.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
Was it the Nvram reset back to factory settings that you tried or a hard reset?
Try selecting the option on the display a little higher above the icon to see if that helps. Some touch screens are finicky.
I find that on the Lab printers when I am selecting different menus.
If the issue continues, please call our technical support at 800-474-6836 for further assistance. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
Forecast splitting not working correctly
Hello
I have a problem with the forecast splitting not working correctly. We are using 2M->W 2 MONTH IN WEEKS 0 GLEI and most of the time this appears to work fine but there are occasions where the forecast is split for May, did not split Jun but split July.
E.g.
06.05.2008 IndReq VSF 9,424-
12.05.2008 IndReq VSF 20,845-
19.05.2008 IndReq VSF 30,925-
27.05.2008 IndReq VSF 24,740-
02.06.2008 IndReq VSF 134,257-
01.07.2008 IndReq VSF 25,771-
07.07.2008 IndReq VSF 32,213-
14.07.2008 IndReq VSF 32,214-
21.07.2008 IndReq VSF 32,213-
28.07.2008 IndReq VSF 25,770-
Do any of you Guru's have any idea why this would happen?
Many thanks
SueI checked it in MD67
it is working fine.
In MD61 - my demand is 800 each for June and July. it hjas splited as below
system is dividing the total qty on daily basis and then multiplying by no days in that week covered by requirement
W 22.2008 26.667
W 23.2008 186.667
W 24.2008 186.666
W 25.2008 186.667
W 26.2008 186.667
W 27.2008 26.666
W 27.2008 154.839
W 28.2008 180.645
W 29.2008 180.646
W 30.2008 180.645
W 31.2008 103.225 -
System Update not working correctly
Hi forum,
System Update (Version 4.00.0024) is not working correctly on my T500 with Windows 7.
1: Not detecting old versions
SU is not detecting, that there is an old version of Access Connection (5.42) installed although there is a new version 5.50 avaliable. I had to do a manual update.
2: Not installing a suggested update
Each time I run SU, I get a suggested update for "Fix for Issue of HDD with HDP Detection for Windows Vista/7". After downloading there comes a meaningless message "package was not installed" (Paket wurde nicht installiert). No hint for any error.
3: Some drivers (e.g. for the ultranav) have not been downloaded at all - I had to test the functions of some hardware components and download the appropriate drivers manually in case of malfuncion.
Probably there is a solution known within the forum community, at least this should be a message to lenovo (I received no response from the help desk when reporting this finding).
Regards
AH_DEDear Herik,
thanks for your answer.
I checked the log file and found thousands of entries. Here are the lines related to "Fix for ...".
Info 2010-02-03 , 08:40:37
bei Tvsu.Gui.CustomComponents.UpdatePanel.SynchronizeBoxPackage(Object sender, EventArgs args)
Message: Selected to install: Fix for Issue of HDD with HDP Detection for Windows Vista/7, with
Info 2010-02-03 , 08:40:43
bei Tvsu.Coreq.LoadCoreqsProcessor.ProcessUpdatesImplementation(Update[] ups)
Message: Candidate list:
Fix for Issue of HDD with HDP Detection for Windows Vista/7[reboot type 3]
Info 2010-02-03 , 08:40:57
bei Tvsu.GenericPackageInstaller.GenericPackageInstaller.ExtractFiles(String extractCommand)
Message: osfq03ww.exe -s -ex -fC:\SWTOOLS\OSFIXES Extract command was executed sucessfully in Fix for Issue of HDD with HDP Detection for Windows Vista/7 update
Info 2010-02-03 , 08:40:57
bei Tvsu.GenericPackageInstaller.CmdInstaller.InstallUpdate()
Message: Update Fix for Issue of HDD with HDP Detection for Windows Vista/7 is being install using Windows Service
Info 2010-02-03 , 08:40:57
bei Tvsu.Engine.Process.PackageInstallerProcess.InstallNewUpdates()
Message: Update Fix for Issue of HDD with HDP Detection for Windows Vista/7 installation failed
ADDITIONAL ENTRIES
Info 2010-02-03 , 08:40:57
bei Tvsu.Gui.FlowScreens.Results.AdjustComponent()
Message: System updated:
Installed=0
Not Installed=Tvsu.Beans.Update[]
Deferred=0
Download Failed=0
Hidden=0
Severe 2010-02-03 , 08:41:17
bei Tvsu.Sdk.SuSdk.ShutDownApplication()
Message: Has happened an exception while the UNCAuthenticator.Shutdown() was executedShare name can not be null or empty
Since I'm a normal user only, I can't interprete this information. Do you know what to do?
Kind Regards
AH_DE -
Sound blaster not working correctly?
Sound blaster not working correctly #I have a 64 bit, windows vista system.
A Logitech Z-5500 Digital speaker system (one woofer, center speaker, left, right, rear right, left rear speakers, and a seperate control head).
I have an X-fi gamer sound card.
I recently formatted my hard dri've and reinstalled everything. Trying to make everything happy again. Here is my problem:
When I use the Creative Console Launcher (CCL), my front right speaker tests fine. My front left speaker comes out of the woofer. And no other speakers will test at all. It does this in all modes (2., 4., 5. and 7.).
When I play some music, it is coming out of all of the speakers. But it won't test properly in the CCL. So, do I have an issue, does what the CCL is doing not matter, or something else In some games, hearing what direction stuff is coming from matters, so if it is sending sounds to the wrong speakers, then I need to figure out a fix.....hence my post.
Thanks for any help you can give, RobertWell, as the official documatation states, the Archlinux is for more or less advanced users, and if you're not one, we will make you one
First of all, if you compiled your sound as modules, try putting this in your rc.local:
stat_busy "Activating Sound"
/sbin/modprobe your_sound_module
/sbin/modprobe other_sound_module
/sbin/modprobe yet_other_sound_module
stat_done
Change your_sound_module stuff to your module names as you configured in the kernel, of course.
Second: in order to have two or more sound apps working at the same time, you need some kind of sound server. For default one (esd), uncomment esd in /etc/rc.local (remove ! before it) . After that, you'll have to configure your sound apps to use esd. I know that this is extremely easy with xmms and xine, dunno about others. I do not use esd, because my favorite games (quake3 and half-life) require direct access to /dev/dsp.
And remember: nobody blames for asking 8) -
Can an ipod get a virus from a pc that has a virus. After connecting two different ipods to my pc to download music they both are not working correctly, could the virus have transferred to the ipod, if not why would both ipods not work and be doing the same thing? When trying to click on a game it just stays on the main screen.
- I have not heard of a virus that can cause problem with an iDvice that has not been jailbroken.
- Try resetting the iPods. nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Do you hve problems with one game? The same game on both iPods?
Other apps? -
Program not working correctly-Help!
class Sort
/* method takes an array of integers as an input,
* and returns a copy with the element values sorted
* by select method.
int[] selectSort(int[] input)
/*declare variables to be used in array */
int x, y, max, temp;
int[] select = new int[input.length];
/*This loop reads the entire array */
for(x = input.length - 1; x>0; x--)
max = 0;
/*This loop checks to see if any number is
lower possible greatest number /
for(y = 0; y <= x; y++)
{//Returns number if lowest number
if(input[y] > input[max])
max = y;
}//end of if statement
}//end of inner loop
/*Switches the values */
temp = input[x];
select[x] = input[max];
select[max] = temp;
}//end of outer loop
return select;
} //end of selectSort()
/* method takes an array of integers as an input,
* and returns a copy with the element values sorted
* by bubble method.
int[] bubbleSort(int[] input)
int[] bubble = new int[input.length];
for (int x = 1; x < input.length; x++)
for (int y = 0; y < input.length - 1; y++)
if (input[y] > input[y+1])
int temp = input[y];
bubble[y] = input[y+1];
bubble[y+1] = temp;
return bubble;
} //end of bubbleSort
**********************Test Class**********************
class TestSort
public static void main(String[] args)
/* count variable used as loop counter when
* result table display is generated
int count;
/* variable for object of class Sort */
Sort x;
/* create object of class GroupEx2 */
x = new Sort();
/* create a source array of integer elements */
int[] y = new int[5];
/* assign values to array elements to be sorted */
y[0] = 8;
y[1] = 5;
y[2] = 3;
y[3] = 9;
y[4] = 1;
/* create variable for target of select sort array */
int[] ss;
/* create variable for target bubble sort array */
int[] bs;
/* call method to return an array with element values select sorted*/
ss = x.selectSort(y);
/* call method to return an array with element values bubble sorted*/
bs = x.bubbleSort(y);
/* display original and sorted arrays in three columns*/
System.out.print("Input Array" + "\t");
System.out.print("Select Sort" + "\t");
System.out.println("Bubble Sort");
for (count = 0; count < y.length; count++)
/* Column 1: original array */
System.out.print("input[" + count + "] = " + y[count]);
/* tab between columns 1 and 2 */
System.out.print("\t");
/* Column 2: select sorted array */
System.out.print("select[" + count + "] = " + ss[count]);
/* tab between columns */
System.out.print("\t");
/* Column 3: bubble sorted array */
System.out.println("bubble[" + count + "] = " + bs[count]);
} // end of display for loop
} // end of main()
} // end of class TestSortThanks for the Bash! I'm surprised you had the time
for it.Go back and look at your original post. A whole bunch of code, and the only description of the problem is "not working correctly." Do you honestly think that's a reasonable way to ask for help? Do you go to the doctor and say, "I'm sick" and then just wait for him to cure you? Do you take your care to the mechanic and say only, "It's broke"?
Look, this is your problem and it's your responsibility to fix it. There are people here who are happy to help you, but it's up to you to provide a reasonable statement of what's wrong, what you've tried, what you don't understand. For instance:
Does it compile? If not, post the complete error message.
Does it run, but throw an exception? If so, post the stack trace.
Does it not throw an exception, but not behave the way you expect? Then describe the expected beavior and the observed behavior.
Do you really need to be told this stuff? It seems like common sense that when you're asking people to spend their time helping you, you should give them the information they need to be able to do so. -
My MacBook Pro keyboard not working correctly after Win7 bootcamp installation.
Installation went well but when I boot either with OSx or Win it always keeps Windows keyboard.
How can I have Mac keyboard in OS boot and Win keyboard in Win boot?Hi - I have the exact same model as your MacBook and had a few questions as mine is acting up. I upgraded the ram to 8gb (2x 4GB ram) and ever since then my computer has not been running as smoothly and the start up time is horrendous. Have you encountered this problem? And if so how did you fix? What would you advise me do?
I was thinking of reverting back to the original factory 4GB then rebooting the entire computer. Any suggestions?
Thanks in advance!
Allen -
Since updating my Late 2010 iMac to Moutain Lion the sleep function does not work correctly. They system keep waking up for no reason. The monitor comes comes day or night. I cannot figure out a fix or work around. Any ideas?
Please read this whole message before doing anything. This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it. Step 1 The purpose of this step is to determine whether the problem is localized to your user account. Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.” While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin. Test while logged in as Guest. Same problem(s)? After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it. *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing. Step 2 The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. *Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Test while in safe mode. Same problem(s)? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.
Maybe you are looking for
-
Anyconnect SSL VPN States Contacting...
I had my ssl vpn working and now the anyconnect client that I downloaded just says Contacting... It will not give me an error at all. If I use the Anyconnect App on my droid phone it says "Anyconnect cannot confirm it is connected to your s
-
I can no longer access any BBC websites
I have my homepage set as the bbc website for many years - since yesterday I have been unable to connect to any of the bbc websites - I am having no problems accessing any other sites just the BBC for some strange reason
-
why do i get error code -3212
-
Hi I have seen & used the spell check for threads with memos on sdn When will this be delivered as part of the functionlity in KM in EP6? Regards Arun
-
Adobe Elements 10-what happened to the pics?
Normally I try to avoid anything "Adobe" but I had to buy Elements 10 because Corel's program refused to operate on my computer because I had once used a trial version of pro 4. I had been using Picasa and it has all my pictures. When I installed Ado