Time limit on imovie
I am working with iMovie 11 for the first time and all was going well until my movie reached the 4:10 mark. Is there a setting I need to change? Any help is appreciated.
No time limit.
But you'll need a lot of hard drive space to hold the file. And if something goes wrong you won't have anything unless you also record to the camera.
Similar Messages
-
Size/time limit for AppleTV movie files?
Scenario: I have a few hundred iMovie projects that I want to convert to AppleTV movies. My first project was just under two hours, and it converted fine. The second project was just under three hours total (33GB .DV file), and it crashed at 99% completion on two separate tries, giving me a cryptic error message (15+ hours processing time each attempt -- aargh). I am using the latest version of QuickTime Pro to convert the projects, and not running anything else during the conversions.
Right now the only solution that seems to work is to split anything over 2 hours into two parts, which seems kind of pointless and diminishes the advantage of the whole AppleTV concept in the first place. Granted most of the projects are around 2 hours, so most of the time it won't be an issue, just on the longer iMovies.
Anyone know if there is a size/time limit to files that you can convert? Would it be better to import the .DV files into iTunes and try to convert them there instead? Or is there a way to do it from iMovie (I am using the original iMovie HD version from a few years back). Thanks.Thanks Winston & Alley Cat for your insights -- I figured I would just do a straight QT conversion to the proper specs and did manage to find it by digging around a bit. In Export(Share) / QuickTime / Expert Settings there is a preset for AppleTV buried deep in there.
Sorry, I feel like a bonehead for not being able to locate this option earlier. I thought QuickTime Pro was one of the few apps that could only do this conversion, thinking that my version of iMovie HD (circa 2006) was too old to have the AppleTV preset. (Must have been added during one of the QuickTime updates.)
Anyways, success to report. I tried re-converting the file (2 hours 47 minutes length) and it worked this time. The total conversion time was actually quite a bit faster than QT Pro plus it takes one less step now. I don't know why it is so much faster than QT Pro, but it compressed to the right specs H.264 AAC codec and aspect ratio.
BTW, I really, really like my AppleTV. Not perfect, but it sure is cool and everyone who comes over and sees it is kind of blown away by what this little box can do. -
Youtube have increased their time limit to 15 minutes per video, however iMovie still says only 10 minutes. Any help?
First you would need to share your movie using SHARE/EXPORT MOVIE
(SHARE TO ITUNES OR SHARE TO MEDIA BROWSER OR SHARE to QuickTime would also work)
This is the file you upload to YouTube. -
Error while executing a report : Time limit exceeded
Hello Experts,
i have executed a report and it took long time and finally throw an error saying that time limit is exceeded ,
please suggest how to resolve the problem
Thanks in Advance
NityaHi Nitya H,
There are many resons behind Time out issue.
It is better to find where exaclty, our report is taking more time.
Below are the some of the bottle necks we need to monitor for time out issue:
1) OLAP query generation time.
2) F4 Search time.
3) Read Cache.
4) Write Cache.
Above features we can monitor @ RSRT transaction.
If OLAP query generation time is taking much time means ,pls regenerate the query @ RSRT.
For F4 search ,keep mater data as data retrival target.
For Read Cache and Write Cache increase the query memory @ RSRT.
Plse check the report and let me know if there is other bottle necks for query execution....
_Note:_ This is just a high level view but we can have many performance drills...like Free char ,complex calculated key fig...etc..
Hope this may helps you...
Cheers,
Maruthi -
Hi Everyone
My Connection Pool parameters JCO api.
client=300
user=SISGERAL_RFC
passwd=******
ashost=14.29.3.120
sysnr=00
size=10
I have these parameters on my Connection Pool and sometimes appear these wrongs in my application:
1.
2006-01-07 13:20:37,414 ERROR com.tel.webapp.framework.SAPDataSource - ##### Time limit exceeded. LOCALIZED MESSAGE = Time limit exceeded. KEY = RFC_ERROR_SYSTEM_FAILURE GROUP = 104 TOSTRING = com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Time limit exceeded.
2.
2006-01-07 14:01:31,007 ERROR com.tel.webapp.framework.SapPoolConnectionManager - Timeout
Id like to know if is happening.
Are there something wrong with my connection pool?
What can be happening?
ThanksRaghu,
Thanks for your response.
Yes, the pool connections are in place according to the sAP note mentioned above.
Regards,
Faisal -
Every Time I Open iMovie It Freezes
The other day, I imported an event into iMovie '11. During the optimizing phase, the loading bar froze and the spinning rainbow wheel appeared. I waited for a couple of minutes to see if the problem would fix itself but it didn't so I decided to force quit iMovie. Now every time I open iMovie, it goes straight to trying to import the event again and will just freeze. I've tried restarting, shutting down, and force quitting it multiple times but it still doesn't work. Any suggestions? Also, I'm using an iMac OS X 10.6.8
Have you added anything unusual to the project, compared to others that play normally? For example - photos other than jpegs, or 3rd party sound effects downloaded from the internet.
Have you made any speed changes, such as slow motion, using manually entered percentages rather than the presets from the speed change slider. This normally causes issues with audio on export, but doesn't seem to affect the project in Edit or Preview mode. So it's probably not causing the freeze issue, but thought I should mention it.
John -
HHow can I get the 15 minute time limit back instead of putting in iTunes password on every purchase?
Settings > General > Restrictions > Require Password (Password Settings on iOS 8)
-
Short dump "Time limit exceeded" when searching for Business Transactions
Hello Experts,
We migrated from SAP CRM 5.2 to SAP CRM 7.0. After migration, our business transaction search (quotation, sales order, service order, contract etc) ends with the short dump "Time limit exceeded" in class CL_CRM_REPORT_ACC_DYNAMIC, method DATABASE_ACCESS. The select query is triggered from line 5 of this method.
Number of Records:
CRMD_ORDERADM_H: 5,115,675
CRMD_ORDER_INDEX: 74,615,914
We have done these so far, but the performance is still either poor or times out.
1. DB team checked the ORACLE parameters and confirmed they are fine. They also checked the health of indices in table CRMD_ORDER_INDEX and indices are healthy
2. Created additional indices on CRMD_ORDERADM_H and CRMD_ORDER_INDEX. After the creation of indices, some of the searches(without any criteria) work. But it takes more than a minute to fetch 1 or 2 records
3. An ST05 trace confirmed that the selection on CRMD_ORDER_INDEX takes the most time. It takes about 103 seconds to fetch 2 records (max hits + 1)
4. If we specify search parameters, say for example a date or status, then again we get a short dump with the message "Time limit exceeded".
5. Observed that only if a matching index is available for the WHERE clause, the results are returned (albeit slowly). In the absence of an index, we get the dump.
6. Searched for notes and there are no notes that could help us.
Any idea what is causing this issue and what we can do to resolve this?
Regards,
BalaHi Michael,
Thanks. Yes we considered the note 1527039. None of the three scenarios mentioned in the note helped us. But we ran CRM_INDEX_REBUILD to check if the table CRMD_ORDER_INDEX had a problem. That did not help us either.
The business users told us that they mostly search using the date fields or Object ID. We did not have any problem with search by Object ID. So we created additional indices to support search using the date fields.
Regards,
Bala -
Error while running query "time limit exceeding"
while running a query getting error "time limit exceeding".plz help.
hi devi,
use the following links
queries taking long time to run
Query taking too long
with hopes
Raja Singh -
TIME LIMIT EXCEEDED ERROR WHILE EXECUTING DTP
Hi gurus,
I Have got an error while executing
The errors are as follows.
1.Time limit exceeded. No return of the split processes
2.Background process BCTL_DK9MC0C2QM5GWRM68I1I99HZL terminated due to missing confirmation
3.Resource error. No batch process available. Process terminated
Note: Iam not executing the DTP as a back ground job.
As it is of higher priority the answers Asap Is appreciated.
Regards
Amar.Hi,
how is it possible to execute a DTP in dialog process. In my mind it is only possible for debugging...
In "Display Data Transfer Process" -> "Goto" -> "Settings for Batch Manger" you can edit settings like Number of Processes or Job Class.
Additional take a look at table RSBATCHPARALLEL and
http://help.sap.com/saphelp_nw04s/helpdata/en/42/f29aa933321a61e10000000a422035/frameset.htm
Regards
Andreas -
Time Limit exceeded while running in RSA3
Hi BW Experts,
I am trying to pull 1 lakh data from CRM to BI System.
Before scheduling, i am trying to execute in RSA3.I am getting the error message as "Time Limit Exceeded".
Pls suggest, why it is happening like this.
Thanks in advance.
Thanks,
Ram.Hi,
because huge data with in the stipulated time it is not executing and showing the all records ,so it is better to go any selection option by each document type or some else then u can add all the documents ,anyway in bw side we r running this job in background so no problem.if u want see all records at a time then u can discuss with ur basis people to extend the time for that.
Thanks & Regards
sathish -
Hello All,
I am trying to execute a custom program with a variant, but I receive the Time limit exceeded error [TIME_OUT].
I am now trying to analyse why this error has occurred as I am a beginner. Any help shall be greatly appreciated.
Regards,
Arpita.
Moderator message: Welcome to SCN!
Moderator message: Please Read before Posting in the Performance and Tuning Forum
Edited by: Thomas Zloch on Oct 20, 2011 2:01 PMHi Ramya,
Your prog running in the back ground, so the time limit of the prog is exceded. Go to sm37 see the prog running time if exceded correct the time.
Regards
Srinu -
Time Limit exceeded error in R & R queue
Hi,
We are getting Time limit exceeded error in the R & R queue when we try to extract the data for a site.
The error is happening with the message SALESDOCGEN_O_W. It is observed that whenever, the timelimit error is encountered, the possible solution is to run the job in the background. But in this case, is there any possibility to run the particular subscription for sales document in the background.
Any pointers on this would be of great help.
Thanks in advance,
Regards,
Rasmi.Hi Rasmi
I suppose that the usual answer would be to increase the timeout for the R&R queue.
We have increased the timeout on ours to 60 mins and that takes care of just about everything.
The other thing to check would be the volume of data that is going to each site for SALESDOCGEN_O_W. These are pretty big BDOCs and the sales force will not thank you for huge contranns time
If you have a subscription for sales documents by business patrner, then it is worth seeing if the business partner subscription could be made more intelligent to fit your needs
Regards
James -
Time Limit exceeded error in ALV report
I am gettting error "Time Limit Exceeded" when i execute ALV report. Can i run the program in background and how to do that?. I had already optimized my query in the program but even then i am facing the same issue.
You can process the alv in background by pressing F9...I guess that the output would be available as a spool in SP01.
You may need to re-check your query...And also, review the alv catalog and any events you are using....
Greetings,
Blag. -
Time Limit Exceeded while executing Proxy Program
Hi all,
we are frequently facing Time Limit Exceeded problem in R/3 system while exceuting proxy program for large payloads (appx 5-7 MB). Sometimes we are able to successfully restart the message and sometimes we have to delete these messages. How can we resolve this issue.
Thanks,
Mayankhi Joerg,
we are getting this error in inbound queue in R/3 system, also this is a async call, so no chance of any communication interruption b/w SAP systems. From PI system, message is succeccfully passed to R/3 system & Time Limit Exceeded is coming in R/3 system inboud queue (SMQ2). Is it poosible that timeout will happen within R/3 system.
Thanks,
Mayank
Maybe you are looking for
-
this is the message i received while installing iTunes "Service "Apple Mobile Device" failed to start. verify that you have sufficient privileges to start system services". I had to uninstall and then reinstall iTunes because something wrong happened
-
Port number of a server application.
I have a server running on an IP address but i am unable to find out on which port is this running. How can I know the port on which the server is running? If I ping to the server,I get the IP address only.
-
Why am i having trouble downloading flash player?
everytime i try and install the free flash player on my computer it does not want to download,what is going on? my computer is brand new i should not have this kind of problem.i want to able to play games and print out coupons this is really fustra
-
Prompts retain values each time a report is opened - how do I stop this?
Post Author: adrian CA Forum: Publishing Here is the scenario:I develop a report using webi (XI R2) and specify that the filter criteria become prompts. I run the query, while still in designer, and retrieve the data.Things look great so I publish t
-
Workflow execution in Oracle_BI_DW_Base.rep
Hi, I had installed OBI apps. Gone through repository configuration i.e. deleting the contents of repositroy, then restoring, pointing to Oracle_BI_DW_Base.rep. So far so good. Now, there are morethan hundreads of workflows in every folder like SILOS