Time line on Intel Macs

We just got some grant money at work and we are going to be upgrading our computers and I would love to get a new intel Mac (not a mini or book).Is there any chance the big machines will be out by the summer?...Any info would be great.. even a rumor link would be fine.
Thanks
-Allan

So I am guessing the Macs wont be ready till mid 2007 at the earliest?
Yes, you're guessing. Apple announced the Intel Macs at just about the same time that Intel made the CoreDuo available. I won't speculate, but I'd expect the development of a possible new PowerMac to be happening in parallel with development of a new Intel CPU.

Similar Messages

Applications need to be Force Quit most of the time on new Intel Mac Pro.

Most all of my ILife and Apple applications now need to be Force Quit. What can I do to restore a normal Quit of my applications?

Thanx, howwow.
But, been there, done that. Along with Zapping PRAM; TechTool; and Cocktail. Is there some plist or other prefs file that got corrupt?

Can't Migrate from G4 to Intel Mac Mini

Hi
I have been unable to migrate files from my old G4 destop to my new Intel Mac mini. I wonder if anyone could help.
I first tried first using the migration assistant on the Mac mini and used the G4 as a fire wire drive. Failed twice, the process froze both times.
Erased Intel Mac mini and tried to do a restore from G4 using Disk Utilty. Failed twice. Didn't complete process.
I then tried the same twice using Supe Duper. Completed process (took hours) but in both cases couldn't boot Mac mini. Get the folder icon on boot indicating can't find system (I think).
I though I would then clean re-install system files from restore disks that came with MIni mac and start a fresh, but won't allow me to do this !! Spent two days and no further forward.
Any suggestions ?
Would erasing Mac mini and and trying Carbon Copy Cloner work ?
Can I add files manually from G4 to mac mini ?
Thanks in advance.
G4 ibook. G4 desktop, mac mini (intel) Mac OS X (10.4.7)

Exactly which model G4 tower do you have? The
PCI-graphics G4 towers do not support FireWire Target
Disk Mode.
If FWTDM works, have you replaced the hard drive that
came with the G4? Technically, Apple claims FWTDM
will only work with the OEM (original) hard drive
that came with the G4 tower. If you've replaced it or
added a second drive, it might not work correctly in
"target" mode.
If you do have a new hard drive, you should be able
to put it into a FireWire (or USB) external hard
drive case and use the Migration/Setup Assistant to
copy your files over.
If you're still having trouble, you can copy your
files over manually. Do you know which files you're
interested in copying? If your G4 tower works in
"target" mode, but the Migration/Setup Assistant is
having trouble, you can usually just drag all the
files and folders from your user's old home folder to
the new folders on the new computer. (Macintosh
HD/Users/YourUserName/Pictures > NewMacintosh
HD/Users/YourUserName/Pictures)
-Doug
Yes I did change the hard drive to a bigger one so that may be the problem.
When I use the Traget mode I do see my "old" drive (both partitions) on my desktop so it suggests firewire is working.
Won't take everything across including applications, library etc.
Will let you know how I get on.
Thank you for your time. Geatly appreciated.

Has anyone experienced this problem: I am editing in FCP 7.0.3 on a Mac 10.6.8 - I have a clip in the browser that is full frame and matched the other clips but when I drop it in the time line it becomes a fully zoomed in version of itself

has anyone experienced this problem: I am editing in FCP 7.0.3 on a Mac 10.6.8 - I have a clip in the browser that is full frame and fine and it matches the other clips in my bins but when I drop it into the time line it becomes a fully zoomed in version of itself and I can only see a small portion of the image. What's going on? I've noticed this has happened in the past randomly with other clips and it's driving me cray cray! Any help appreciated greatly and thanks in advance for taking the time

In the FCP Browser, click on the source clip that is showing up sized incorrectly to select it. Once it is selected, type Command + 9 to see the item properties for the clip. Either report those properties here, or take a screen shot of the item properties and post the screen shot here.
Next, click anywhere in your sequence timeline and then type Command + 0 {zero} to see your sequence settings. Either report those settings or take a screen shot of the sequence settings and post that screen shot here.
MtD

How to extend the time line for the premiere on mac pro mavericks

how to extend the time line for the premiere on mac pro mavericks

Wrong place.
Try the Adobe Premiere forum.
http://forums.adobe.com/community/premiere
Good luck,
x

Intel Mac: unix command line reports powerpc hosttype?!?

Our brand new Intel Mac reports that it's a powerpc from the command line! Open Terminal & type the two bash commands below to compare (set & uname -a). I think that's why FINK was confused when we tried to compile vncserver.
What should hosttype be set to for an intel mac?
set
BASH_VERSINFO=([0]="2" [1]="05b" [2]="0" [3]="1" [4]="release" [5]="powerpc-apple-darwin8.0")
BASH_VERSION='2.05b.0(1)-release'
HOSTTYPE=powerpc
MACHTYPE=powerpc-apple-darwin8.0
TERM=xterm-color
uname -a
Darwin lifesaver 8.8.1 Darwin Kernel Version 8.8.1: Mon Sep 25 19:42:00 PDT 2006; root:xnu-792.13.8.obj~1/RELEASE_I386 i386 i386

Is there anything useful here or here?
(16635)

Can anyone help. I need to reuse my SDHC cards and transfer footage from an ongoing profect to a hard drive. Can i edit from the Hard drive or am I better transferring info striaight from camera to time line

Hi I am using a JVC GY-HM100 camera which is meant to work well with final cut pro. I have an ongoing project but need to save money and resuse the SDHC cards that are currently full of footage.
Would I be better off transferring the footage straight to the time line (as rumour has it you can do this with this camera) or store the footage on a hard drive and edit it later without risk of losing the footage.
Many thanks
Lindabob

Thanks Linda,
Here's some more info for you:
This is my pet checklist for questions regarding FCP X performance - you may have already addressed some of the items but it's worth checking.
Check the spec of your Mac against the system requirements:
http://www.apple.com/finalcutpro/specs/
Check the spec of your graphics card. If it's listed here, it's not suitable:
http://support.apple.com/kb/HT4664
Make sure you're using the latest version of the application - FCP X 10.0.3 runs very well on my 2009 MacPro 2 x 2.26 GHz Quad-Core Intel Xeon with 16 GB RAM and ATI Radeon HD 5870 1024 MB. I run it with Lion 10.7.3.
Check that you have at least 20% free space on your system drive.
If you have not already done so, move your Projects and Events to a fast (Firewire 800 or faster) external HD. Make sure the drive's formatted OS Extended (journalling's not required for video). You should always keep at least 20% free space on the Hard Drives that your Media, Projects and Events are on.
If you are getting crashes, there is some conflict on the OS. Create a new (admin) user account on your system. Do NOT import any of the settings etc from the old account - simply use FCP X from there - if it runs a lot better, there's a conflict and a clean install would be recommended - but remember, if you reinstall the system, and then use Migration Assistant (or anything else) to import all your old settings etc etc, you may well be importing the cause of the conflict in the first place.
Keep projects to 20 mins or less (about half that for Multicam). If you have a long project, work on short sections, make them into Compound Clips and then paste these into a final project for export.
If you ever experience dropped frames, I strongly recommend you use ProRes 422 Proxy - it edits and plays back like silk because the files are small but lightly compressed (not much packing and unpacking to do) - but remember to select 'Original or Optimised Media' (FCP X Preferences > Playback) just before you export your movie, otherwise it will be exported at low resolution.
If you have plenty of processor power, for the ultimate editing experience, create Optimised Media - most camera native files are highly compressed and need a great deal of processor power to play back - particularly if you add titles, filters or effects. ProRes 422 takes up much more hard drive space but is very lightly compressed. It edits and plays back superbly.
Hide Audio Waveforms at all times when you don't need them (both in Browser and Storyline / Timeline). They take up a lot of processor power. (Use the switch icon at the bottom-right of your timeline to select a format without waveforms if you don't need them at the moment, then switch back when you do).
Create folders in the Project and Events libraries and put any projects you are not working on currently, in those folders. This will help a lot. There's a great application for this, called Event Manager X - for the tiny cost it's an invaluable application.
http://assistedediting.intelligentassistance.com/EventManagerX/
Unless you cannot edit and playback without it, turn off Background Rendering in Preferences (under Playback) - this will help general performance and you can always render when you need to by selecting the clip (or clips) and pressing Ctrl+R.
The biggest single improvement I saw in performance was when I upgraded the RAM from 8 GB to 16.
Andy

Windows Vista Installation on New Intel Mac

I bought a full version of Vista about two years ago. I removed it from the Intel Mac I had originally installed it on. Indeed, I've replaced the HD it was on, but for reasons other than removal of Vista.
I installed Vista successfully on a new Intel Mac, but it won't accept my Product Key.
I followed the instructions and tried the online activation. After entering a very long string of numbers, I received a curt, automated, "We do not recognize your registration number. Please call back at another time." The line then disconnected.
Various searches online have produced no result. The Microsoft help page has an article on registration, but all searches from it for my issue lead me back to that same page.
I assume that the fact that the OS was registered on the other machine has caused a problem, but I note that the license lets me install the OS on one machine. This, I am doing. As the OS was sickeningly expensive, I'd like to reinstall to get some use out of it.
Any ideas?

That's sort of what I feared.
Considering that almost no one buys a "full license" to Windows other than factory installed on a machine or as an upgrade, I figured the problem I had would generally be unusual, except for people who installed it new on an Intel Mac, which is why I posted the question here.
I've not been able to find on Microsoft's help page a phone number to call Microsoft about this issue, and, as I said, all purported web-based solutions send me right back to the very same web page about product registration. If they weren't a monopoly, they wouldn't be able to get away with this.

I seem to have a virus in my mac book pro as it is running rather slowly at times. Also a Mac keeper small window comes up

Virus in my macbook pro - how do I sort it?

There are no viruses affecting OS X. See:
Helpful Links Regarding Virus Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
If you require anti-virus protection I recommend using ClamXav.
I would first get rid of Mac Keeper: How to Remove MacKeeper. Next look for other things that may cause your computer to run slower:
Things You Can Do To Resolve Slow Downs
If your computer seems to be running slower here are some things you can do:
Start with a visit to: OS X Maintenance - MacAttorney.
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Repair the Hard Drive - Lion
Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Restart your computer normally and see if this has helped any. Next do some maintenance:
Suggestions for OS X Maintenance
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Data Backup
3. Deja Vu
4. SuperDuper!
5. SyncTwoFolders
6. Synk Pro
7. Synk Standard
8. Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

Are early Intel Macs dead as far as future Mac OsX's?

Ok so I have a silly message. Will Mac leave us in the dust as far as OsX on older Intel Macs circa 2006?

The 2006 models were the first and slowest Intel models.
Plus, the fact that the max. RAM for these iMacs is only 3 GBs.
Between the slow CPU and very limited RAM, I don't think the 2006 models are up to the challenge running Mt. Lion.
3 GBs is barely enough to run OS X, by itself, nevermind trying to run any other applications atop OS X.
I don't even think they are really up to running OS X 10.7 Lion!
I was still on a PowerPC Mac up until 4 months, ago.
PowerPC users end fate came in 2007 when OS X 10.5 Leopard was the last universal OS.
Onxe the switch to INtel CPUs came, every PowerPC Mac user knew the clock was ticking down to the day when these Mac would no longer be supported.
If late Mac upgraders bought the last of the G5 models produced in 2005, they only got 2-3 years of OS X updatea for OS X 10.5 before Apple pulled the plug on all support for PowerPC models.
The older PowerPC Mac user based fared a lot better and had quite a few years of support for their aging Macs.
Just because there is no longer any continued OS support doesn't mean your particular Mac still doesn't still do what you need or expect it to do. No one is forcing you to stay on the Mac hardware/software upgrade path.
Apple also did this with the transition from old 68000 model CPU's to the Motorola PowerPC CPU line of Macs back in the 1990's.
There is always going to be a time when Apple is going to discontinue Mac models.
There is no reason to feel left out if the Mac you purchased is still working well and for you.
I stayed with a 1.25 GHz PowerMac G4 tower with 2 GBs of RAM for almost 10 years. That Mac served me very well! For me, I had financial means and it was a decision to finally move on and move up to a more faster and modern Mac.
I purchased a 3 year old 27 inch screen iMac with the hope I can get another 4-6 years from the iMac.

Intel Mac freeze

We developed a program in AW7 that runs on both Windows and
MAC (running from a local EXE). It was working fine until the
release of the new Intel MAC. Now it just freezes at random
locations w/in the program on an Intel MAC. Doesn't seem to be
anything with the way it was coded or the interaction. Can't
replicate any specific freezing issue, it's completely random.
There's actually a number of issues that we've come across w/
the Intel MAC, mpg video won't play (see other posting), sound
doesn't play on some machines, sound only works sometimes on some
machines, etc. We've tried repackaging the files on an Intel MAC
(no good), repacked them on an OS9 machine (fixed other issues in
the past, this time no good). I've heard about Rosetta but I can't
find a way to enable it for our program so I'm assuming that it
just runs automatically. If I'm wrong please clue me in.
With issues running AW7 on OS9 our customers are limited to
running our latest version on OSX as long as it doesn't have an
Intel chip. So, it's almost worthless to develop for the MAC.
We're about out of ideas so, if anyone has one, we could use
the help.
By the way, does anyone actually develop for the MAC w/
Authorware anymore? :)
Thanks

The few Mac-version pieces I've done recently that have to
run on Intel
Macs have all been CD based, so I'm not too concerned about
audio
sizes...so I just leave them as .wav - and I've not
experienced any freezes.
So it seems like that would be worth a try, especially if you
can batch
convert all the audio and change the extension on one line of
code.
Erik
peterevensen wrote:
> We are getting freezes as well, only while an audio file
is playing. Most of
> the audio is .swa. I tried changing them to .mp3s (just
renaming them) and we
> are still getting a freeze on Intel Macs.
>
> I wonder if going to .wavs would help. Or maybe .aif? We
have thoundands of
> sound files, however. They are all external and I have
one variable for the
> extension, so from the Authorware piece, it would be
easy to use a different
> format.
>
Erik Lord
http://www.capemedia.net
Adobe Community Expert - Authorware
http://www.adobe.com/communities/experts/
http://www.awaretips.net -
samples, tips, products, faqs, and links!
*Search the A'ware newsgroup archives*
http://groups.google.com/group/macromedia.authorware

Intel Mac Mini stuck in reboot loop

I just upgraded the hard drive in my 2007 intel mac mini core duo. Drive formatted successfully, contains GUID Partition Table.
OSX 10.5 installed successfully.
Machine rebooted, I ran software update to 10.5.7 successfully.
Upon installing Adobe Flash Player, Adobe Acrobat Reader, machine began to react slowly to commands.
Rebooted machine, went to Grey Apple Screen with spinning dash wheen icon.
Machine rebooted itself, once again going to the grey apply screen with the spinning wheel.
After about 15 minutes of letting the continual reboot cycle happen, I inserted the installation DVD for 10.5, held the power button in to power off the machine, and booted from the disk.
I ran disk utility. Disk Utility shows the hard drive, shows the partition (GUID Partition) correctly.
I Verified Disk, which verified as "OK"
Repaired permissions.
Restarted machine.
Once again, it loaded to the grey apple screen, stayed there with the spinning dash wheel for about 3 minutes then continued to reboot over and over (everytime it reboots it sticks on the grey apple screen for 3 minutes before rebooting.
I once again powered off the machine and reset the PRAM.
Machine stuck again on reboot cycle.
I powered off the machine and reset the mini's SMC.
Machine is still stuck in reboot cycle.
I have also taken the mini back apart and verified that all RAM and connections are seated properly.
Any advice on what to do at this point will be very helpful.

+And I promise I will not download and install a hundred different programs this time.+
Good idea.
Any time you install software in OSX, there is a small, but finite, chance that the installation process won't be able to access a needed file because it is in use. This can mess up pre-binding, or even prevent files from being updated.
So the best advice is not to run any other programs while doing software installs or updates. And when in doubt, run DiskUtility afterwards and fix permissions one more time.
I cringe whenever I think of a post I read a while back about a Mac user who boasted about what music he likes to run in iTunes while doing system software updates. Not a good idea. It's "Russian roulette" with maybe 99 blanks in the "gun", but one real bullet that can kill your Mac's installation.

Installation problems on Intel Mac. claims PPC

I'm trying to install the current Flash Player 10.2 on my Macbook 6,1 (Intel Core 2 Duo, 2.26GHz) with 4GB RAM, running OSX 10.6.6
Browser is Firefox 3.6.13 {Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6; en-US; rv:1.9.2.13) Gecko/20101203 Firefox/3.6.13}
I got the installer from http://get.adobe.com/flashplayer/
The installer puts up a message: "Devices with PowerPC processors are no longer supported"
How can I convince the installer that this isn't a PPC machine ? Why might the installer think so ?

Hi, What browser are you using to try to Uninstall/Install FP vs 10.2? And when you Install 10.1, what browser are you using?
There is no Flash Player support for a 64bit browser. I have been very busy on the Forum and have not had time to check on the 10.3 beta. Not sure what it refers to. Have you? Just asking as I've seen it mentioned on another thread, but it's from those complaining about 10.2 not working. Why anyone would want a beta Installed unless they are involved in the testing and are Developers I don't know.
Any beta is a work in progress, so as long as a user is aware of that it's ok with me. Microsoft has their IE9 in beta too, but with an beta one can expect problems.
Since the 10.2 is not Installing, then I don't think you'd receive any code, do you?
I'm not as familiar with the Mac, but is it possible to upgrade the OS from a PPC to the edition you have now?
I'm going to check a couple of things while you let me know on the above browser info. Also any comments would be welcome:-)
Thanks,
eidnolb

Bluetooth Not Available on Intel Mac mini

I keep losing the Bluetooth wireless connection between my Apple wireless mouse and keyboard and my Intel Mac mini (which is running Mac OSX 10.5.5)
Tried re-booting but it doesn't always come back.
Looked in System Preferences, but if the connection is lost, Bluetooth has disappeared as if not installed. If the connection is present then all seems OK. You can check battery levels etc.
Left to itself Bluetooth can re-appear sometime later as mysteriously as it disappeared, maybe after half an hour or so. Very annoying as I have to result to using an Apple USB mouse and keyboard when the connection is lost.
Tried running Bluetooth Updater but it says I haven't got Bluetooth if the connection is lost! But it came pre-installed on purchase. Problem only seems to have started since upgrading to Leopard. Never had this problem with Tiger.
Any thoughts would be most welcome.
regards,
BJ

Ok, I've resolved this on my machine, at least for the time being.
Here is what I did. I am not advising anyone else to do this and I am in-no-way stating this will fix your problem. I'm just relaying what worked for me. If anyone chooses to try this then it's on their own head!
I opened my Mac Mini and located the Bluetooth circuit board just in front of the rear power button. I removed the small phillips screw holding the board in place and noticed that the connector that connects the board to the main motherboard was not seated well. I removed the connector and reattached it, making sure I felt the 'click' as the connector was pushed home.
I had also read on the net that the routing of the bluetooth ariel cable may cause problems due to interference from the USB ports. I took the opportunity to extract the ariel and run it over the disk and away from the USB ports. Before putting the lid back on I booted up to check Bluetooth was working again.
So, I now have my Mac Mini with Bluetooth working again. We shall see how long this lasts - perhaps the root cause was a loose connection, in which case it may be fixed permanently now. I shall report back in a few weeks.
Be aware that opening your Mac is going to invalidate any warranty. Mine was out of warranty anyway so I was not bothered. I've also got a degree in software and electronic engineering so know my way round the insides of computers. Please make your own assessment of your level of expertise before deciding to try what I did. It may not work for you anyway!

I have OSX 10.5.7 on my Intel Mac. When I try to login using the correct password the screen goes white and just returns back to the login screen. It does not jiggle like when you enter the wrong password.

I have had a number of issues with my Intel Mac recently and had to reboot using disk utilities, safe mode, OSX recovery, but always come back to the login screen but when I type my password the screen goes white and returns to the login screen. My password is correct and the login does not jiggle as it would if the password was wrong. Please advise,

Back up all data if you haven’t already done so. There are ways to back up, even if you can’t log in. Before proceeding,you must be sure you can restore everything to the state it’s in now. If you’re not sure you can do that, STOP.
The procedure below may spare you the need for a clean reinstallation of OS X. If you don't feel comfortable carrying it out, don't. try.
Briefly, you need to delete the following file:
/var/audit/current
If you already know how to do that, you can skip the rest of this message. Do it, and try again to log in.
Boot in single-user mode by holding down the key combination command-S at the startup chime. If you’re using an external USB keyboard, it must be plugged directly into a built-in port on the Mac, not into a hub. Release the keys when you see a black screen with scrolling white text. In this mode, there’s no graphical interface; just a command line. Initially, you can’t make any changes to files.
When the text stops scrolling, and you see a line ending in a pound sign (“#”), type the following command:
mount -uw /
You must type the command exactly as given, with no mistakes. If you don’t feel able to do that, STOP. At this stage, no harm will be done if you make a mistake, but later, it will be. Press the return key.
Next, type the following command:
rm -i /var/audit/current
Press return. You should get the following output:
remove /var/audit/current?
If that's not what you get, STOP. Type the single letter N, press return, and try again. Otherwise, type the single letter Y and pressreturn.
Finally, enter the command:
exit
Press return. The text will start scrolling again, and then the system will reboot. Try again to log in.
Credit for this solution to ASC user AnthonyTW.

Time line on Intel Macs

Similar Messages

Maybe you are looking for