Time Machine And Repair Permissions Error

Hi.
I have a new Intel Mac running Leopard. "Set up Assistant" worked like a charm and brought over all my preferences, iTunes, iPhoto etc. with out a hitch. Verified permissions and the disk and came up clean.
I bought a USB LaCie 500GB external hard drive and connected it up with the idea that I would eventually use it for Time Machine.
First thing after connecting up the new hard drive, Time Machine came up and asked if I wanted it to use the new drive as a Time Machine drive and I clicked on "cancel." Thanks to all of you I knew enough to need to GUID partition and re-format the hard drive, from the FAT 32 that it came with to Mac OS Extended (journaled) that Time Machine needs. After completing this, again, the dialog box popped up about activating Time Machine and I cancelled it again.
I have not, yet, activated Time Machine. But running permission verify and repair yielded this error message both times: Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
This is the same message seen on so many other people's machines and posted here when they run into problems with Time Machine. If I don't resolve this error, will I, too, have problems running Time Machine?
This is so weird. The only thing I did between the clean permissions verification and the one with the error was connect the USB LaCie hard drive and partition and and re-format it. Time Machine has not yet been activated on this machine.
What does this SUID warning mean? Is this something I need to worry about? Should I wait to start using Time Machine?
Or... is this not a problem but there are other things I need to do to insure a good running of Time Machine?
Thanks so much for any advice you can offer.-Charlotte

The SUID is nothing to worry about.
It is documented from Apple stating this.
Everyone of us has that error.
It has not bothered Time Machine from doing its thing.

Similar Messages

Time Machine and Disk Permissions + Compatibility with Snow Leopard

I have received warning from Disk Utility that I should repair permissions as several files show incorrect permissions and, more than that, my 750GB shows "769GB available".
My questions are:
1. If I use Command+R and rebuild the disk from a Time Machine backup, will permissions be reset or will the files just be copied as they are now?
2. Is there a way to verify the TM backups to check the files therein?
3. Suppose, just for the sake of an exercise, that I reload Snow Leopard; can I still use SL's Time Machine to read a Lion Time Machine backup?
Thanks in advance for any advice you can provide!
Fernando

Why are you repairing permissions? It's a waste of time unless you have a specific reason to do it, and the warnings don't mean anything.
To verify your Time Machine backup, proceed as below.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
Drag or copy — do not type — the following line into the Terminal window, then press return:
sudo tmutil compare
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
The command will take at least a few minutes to run. Eventually some lines of output will appear below what you entered.
Each line that begins with a plus sign (“+”) represents a file that has been added to the source volume since the last snapshot was taken. These files have not been backed up yet.
Each line that begins with an exclamation point (“!”) represents a file that has changed on the source volume. These files have been backed up, but not in their present state.
Each line that begins with a minus sign (“-“) represents a file that has been removed from the source volume.
Files that you’ve excluded from backup, or that are excluded automatically, are ignored.
At the end of the output, you’ll get some lines like the following:
Added:
Removed:
Changed:
These lines show the total amount of data added, removed, or changed on the source(s) since the last snapshot.

Time Machine and drive permissions question

I'm using Time Machine on a MacBook with two admin accounts (let's call them admin1 and admin2). admin2 is the account used daily. admin1 is the account used very infrequently.
Things were set up with admin1. I noticed today when I was logged in as admin2 that TimeMachine reported that the last backup was more than 2 week ago (when things were set up), and that the last backup failed because the user didn't have privileges.
I did a Get Info on the drive, and it seemed to confirm that (admin 1 had read/write privileges, but admin 2 had only read access).
To get around the problem I logged in as admin1 and turned Time Machine off. I then logged in admin 2 and selected the disk from there, and turned Time Machine on.
My question is - is this normal behavior? Or if there's something wrong, how to fix it?
Thanks...

Scott Newman wrote:
After a few minutes, an external drive that is mounted on the desktop will spin down--like it should. But...each time a "Save" or "Save As..." dialog box is opened in any application, things will grind to halt for a few seconds while the external drive spins up--even though I will not be saving files to that drive. I've always hated that, which is one reason I've always done manual backups.
Does that happen with Time Machine (either with a drive physically or wirelessly connected via Export Extreme) and is there any way to avoid that?
It happens with TM. I am not sure of any convenient work-arounds. You can of course eject the drive and reattach it when you want to make a backup, but that's a bit inconvenient, IMO.
Is it possible to manually turn on and turn off Time Machine (and the external drive) so as to only do manual backups like I'm doing now? I don't really care about looking up a prior version of file that I've changed. I just want a reasonably current whole-disk backup.
Yes, TM has an on/off switch. Just turn it off until you want a backup. It will simply continue where it left off. It will not create a completely new backup.

Time Machine and File Permissions

'Twere I to rate this question's technicality on a scale of 1 through 10, it would rate 8. Just warning you. Unix people will be especially useful for this.
Okay, so, before the problems started, my hard drive had three partitions. One for OS X, one for file storage for Ubuntu Linux, and one called the "Swap" partition, which somehow relates to Ubuntu (the Ubuntu installer put it there, I've no idea what it's for). Here's a makeshift diagram of what my partition map used to be:
I ran out of space in my OS X partition. You see, I've recently had the fortune to obtain some rather fantastic software. The downside is that the software (and it's files) take up roughly 53GB. I won't trouble with you what it actually is (though it should have dawned on some people by now). Between OS X and Ubuntu Linux, OS X prevailed. As far as I'm concerned, Linux will have to wait 'till I have a larger hard drive.
So, I fired up Disk Utility, and tried to remove the two Linux partitions. It told me it was "Preparing to erase [insert Linux partition name]". It told me that for an hour. After one hour, I said screw it, I'll do this the "hard" way.
My initial plan was to back up my data, and completely reformat my drive, reinstall Leopard, and have it restore from my Time Machine backup. Now, my external drive is not big enough to hold a complete system-wide backup. I had to leave some stuff out. Here's the list of exclusions, taken directly from the back up logs:
Excluding System files: 16.3 GB (242143 items)
Excluding /Developer: 0 bytes (1 items)
Excluding /Users/Audacitor/Downloads: 7.9 GB (18 items)
Excluding /Applications/Creative Suite 3: 3.2 GB (13214 items)
Excluding /Applications/Disk Images/Macromedia: 240.5 MB (4 items)
Excluding /Applications/Utilities: 484.2 MB (111 items)
Excluding /Users/Audacitor/.Trash: 97.3 MB (2142 items)
Excluding /System: 108.2 MB (5874 items)
Excluding /Users/Audacitor/Library/Calendars/Calendar Cache: 144 KB (1 items)
Excluding /Users/Audacitor/Library/Safari/WebpageIcons.db: 52 KB (1 items)
Excluding /Users/Audacitor/Library/Mail/Envelope Index: 680 KB (1 items)
Excluding /Users/Audacitor/Library/Icons/WebpageIcons.db: 20 KB (1 items)
I am uncertain as to why it excluded those last four entries. I didn't ask them to be excluded, so I assumed that was something Time Machine does automatically.
The backup worked normally, or so it seemed. After about a half hour, it told me it was done. I hastily (read; stupidly) unplugged the drive and prepared to reformat my drive. So excited was I to reach my new software, that I made the utter and completely foolish move of not double checking that everything I needed was backed up. If I had, I might never have this problem, and even if this problem were destined to happen, I could have at least saved my Pictures folder (fortunately, most of it's contents are safely residing on my iPod).
So, I wiped my drive. Specifically, I booted into my Leopard Install DVD, and went for the Erase and Install option. The install commenced and finished without a hitch. I brought my "new" computer up, enjoyed the theatrics of the intro movie and started running through the setup. I came to the step where it asks if I want to transfer files from another Mac, from another volume on my Mac, from a Time Machine backup, or not at all. I of course clicked for a Time Machine back up. The first sign of trouble was that my backup didn't show up (despite having my external plugged in). I felt a pang of fear, but it didn't worry me too much, and I thought to myself that I'd just use Migration Assistant later on (the Leopard setup sequence specifically stated I could do this if I so wished).
So I went straight to my desktop and fired up Migration Assistant, and went through the steps till it asked me to select a Time Machine backup. But there were none to select from. I waited a full minute, my fear growing steadily to terror. Finally, I realized that my data was gone, and flipped out. My inner geek, which was screaming at me to calm down and look inside my external, was shackled and thrown into a tiny corner of my now completely panicked mind. This lasted for roughly two minutes. After regaining myself, and opened my external. It contained one folder named Backups.backupdb. I opened it, and inside I found Neomiranda (Neomiranda is the name I gave my computer). So far so good. Inside the folder of Neomiranda, I found 2008-02-20-060526.inProgress. Another 30 seconds of flipping out over the idea of .inProgress. After awhile, I had the sense to right click on it, and hit the "Show Package Contents" option.
Inside were three folders, with three corresponding log files. I quickly realized that each one was a backup. The first two were empty, which I anticipated. Those were my two attempts while figuring out what to exclude, so I could get a backup to fit on my external. The third contained another Neomiranda folder, which contained all my data. Everything except my Pictures folder was there.
So, I went back and forth, manually restoring my data. When I'd finished, I started up a few apps to check that everything worked. Not everything worked. Mail wouldn't even get a bounce from the dock, Firefox told me there was a copy of itself already running, and iTunes complained that I had either a locked disk or insufficient permissions. Acting on iTunes' advice, I set out comparing the permissions of various folders I'd copied to the permissions of their equivalents on another, fully functional, system. Everything checked out. Nothing was locked, and everything had the correct permissions. I fired up Disk Utility and had it a run a permissions repair. It spat out a great deal of stuff that it apparently found wrong, and apparently fixed, but ultimately, it had no effect.
I cannot find anything wrong with any permissions, but I've got a feeling that's where the problem is. Why? Because any time I want to do anything to a folder I've copied, or anything inside a folder I've copied, it wants my admin password. Despite no apparent differences in permissions between folders I don't need a password for and between folders I do need a password for, I need a password for folders I have copied from my backup.
I've not looked into file ownership, as I couldn't find a way to even find out who a file belongs to, much less actually change ownership to anything. If I end having to use chown at a bash, fine with me, but I'm not a Unix man. I'll still need help with it (though I do know how to use the man command).

Same problem and for months now. I haven't been able to find a solution, but I suspect that's because I don't know exactly what's wrong.

Time Machine and file system errors?

Hardware:
- 15" MBP 2GHz (mid 2006) 10.5
- WD MyBook Premium 320gb
Problem:
Time Machine backs up to a partition on the MyBook (drive is GUID partition table, partition is Mac OS Extended). Immediately after a TM backup to a reformatted partition, Disk Utility may or may not detect invalid sibling links, invalid key lengths, or other errors. If it does not detect them after the initial backup, subsequent backups of recently changed files will cause said errors. This is consistent; its occurrence is not a "maybe".
Disk Utility cannot fix these errors. fsck_hfs has had success in fixing these errors once. As I type fsck_hfs is running a second time, so we'll see the results from that. The first run produced the following:
fsck_hfs -ypr /dev/disk1s2
*Invalid node structure*
(4, 44282)
*Invalid volume file count*
(It should be 832071 instead of 802858)
*Invalid volume directory count*
(It should be 181916 instead of 177095)
*Invalid volume free block count*
(It should be 13931374 instead of 14042565)
*Volume Header needs minor repair*
(2, 0)
Questions:
- Of what is this behavior indicative?
- Is the MyBook necessarily bad?
- Is TM somehow the cause?
- Could bad sectors on the MyBook be the cause?
- Is the drive within the MBP the source of these problems (Disk Utility has not previously found any errors...)?
I'm really at a loss...

Boot from the OS X installer disc that came with the computer. After the chime press and hold down the "D" key until the diagnostic screen appears.
Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple logo appears.
5. Wait for installer to finish loading.

Has anyone restored from Time Machine and Application permissions okay?

Greetings Apple Discussions:
Has anyone restored their system from Time Machine yet and had a successful restore of their application permissions from Time Machine?
I just wanted to get confirmation.

I've done several. In fact I did many during beta testing and I've done at least one after installing 10.5 and 10.5.1. Each one done under 10.5 and 10.5.1 were successful without any noticeable issues with permissions.

Im using a network drive with time machine and im getting error 45. Time machine will not work now. Why?

I bought a seagate goflex home 2TB network drive. It worked with time machine for a couple of weeks than now it wont. It just says ERROR 45 now and will not back up. Why?

Welcome to Apple Support Communities.
According to several related Time Machine Error 45 threads in these forums, Time Machine is not well suited to backups on most non-Apple network drives.
https://discussions.apple.com/message/10744727#10744727
https://discussions.apple.com/message/15643759#15643759
https://discussions.apple.com/message/11929252#11929252
https://discussions.apple.com/message/13164522#13164522
One of the discussions provides an off-site link to these suggestions:
http://web.me.com/pondini/Time_Machine/Troubleshooting.html

Disk Utility and Repair Permissions errors

When I ran Repair Permissions before the 10.5.2 update, I would get the message:
Warning: SUID ... blah blah has been modified and will not be repaired.
Now after the 10.5.2 update it says:
ACL found but not expected on "Applications/Utilities", etc.
About these messages Apple says "You can safely ignore these messages. They are accurate but not a cause for concern."
http://docs.info.apple.com/article.html?artnum=306925
Anyone like to shed light on what these messages mean? Curious minds like to know.
Thanks!

I have the same issue - G4 QuickSilver, Dual 1 GHz, 1G RAM. Finally cancelled Repair Permissions after 18 hours. It was listing every application, and the files within each application, on my boot drive. I'm concerned that I can't use Permissions any more without falling into the same trap.
Also looking for help on this.
Thanks.

Time Machine and Permissions

Aloha everyone,
I've read through a lot of the post here and I have not found anything that seems to solve my problem.
I have been trying to restore a couple of directories from my Time Machine backup and I get a message telling me 'The operation can not be completed because you don't have permission to access 'BASEBALL' & 'SplashID', (each one is separate, but I wanted to provide both sub-directories). One of these is a directory I store video in and the other is an application.
Directory is /USER ID/DOCUMENTS/xxxxx
What I have done since I got this message the first time:
* Made sure I had permission per Mac OS. I am Admin on my system.
* Made sure Admin had Read / Write to these files as well as myself
* Confirmed permissions to each level sub-directory under both directories
on my system
* Confirmed sub-directories under Time Machine had same permissions
* Tried restoring Time Machine to each sub-directory
* Renamed sub-directory so a new one would be created when doing restore -
still got error message noted above. Although it did create the sub-dir,
but did not restore data.
* Tried restoring directories to Desktop, still get same permissions message
* Deleted other directories at the same level and restored from Time Machine
without any drama
Anyone have any ideas on how to get this to restore?

Hi - Try reapplying permissions on the files in the Time Machine volume. Give read/write to "everyone."
Next, reapply permissions and ownership via the terminal. Replace username below with your short name.
sudo chown -R username (press spacebar, drop folder into Terminal window, press enter)
sudo chmod -R -N (press spacebar, drop folder into Terminal window, press enter)
sudo chmod -R u+rwX (press spacebar, drop folder into Terminal window, press enter)

Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB hard drive and only 120GB Macbook. It worked fine before the latest Maverick's

Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB external hard drive and only 120GB Macbook. It worked fine before the latest Maverick's update. Any help would be greatly appreciated.

My guess would be it has created an entirely new backup of your drive when you upgraded to Mavericks.
See Here: http://pondini.org/TM/1.html
And here: http://pondini.org/TM/9.html
Peruse the whole site. There is a lot of information there.

Issues with Time Machine File Restore Permissions and Interface

Hi All,I bought a Time Capsule in January 2010, and i've had backups since then.
Time Machine's interface has pretty much always been laggy as ****, but I've always put that down to using it over wifi, perhaps that was a wrong assumption.
Anyway, I went to open a folder in a virtual machine which resides in my mac's documents folder, and it wasn't there. Sure enough this folder wasn't in my documents folder, so I thought i'd restore it from time machine. Time machine shows every segment as a pink fully coloured one (signalling theres a backup there) for a few secs, before most of them turn into a pale pink. Looking into the issue further, it seems as though I don't have permission to access the documents folder on a lot of backups, by looking at the users/brett/ folders on them (which i do have access to), right clicking on the restricted folder shows that everyone has no access, and it's fetching the other user. Trying to add myself to it doesn't work.
I have gone through two MBPs with the same backup set, and a number of hard drives (the latest being a SSD I put in yesterday, and the migration assistant restore from time machine worked without skipping a beat - never had a problem doing full restores or migrations, just using the interface)
Obviously the easiest thing to do would be to start afresh, but I'd rather not as I'd lose 2 years worth of backups, and who's to say this wouldn't just happen again in the future? Could this be why the interface is so slow too?
Thanks guys

studentguy wrote:
Time Machine's interface has pretty much always been laggy as ****, but I've always put that down to using it over wifi, perhaps that was a wrong assumption.
Yes, there is a lot going on to "populate" the display -- it can be sluggish even to a FireWire 800 drive.
Looking into the issue further, it seems as though I don't have permission to access the documents folder on a lot of backups, by looking at the users/brett/ folders on them (which i do have access to), right clicking on the restricted folder shows that everyone has no access, and it's fetching the other user. Trying to add myself to it doesn't work.
I don't do Windoze, so am not familiar with the structure of the VM files, or how the permissions on them work. Many folks exclude them from Time Machine, and back them up separately.
I have gone through two MBPs with the same backup set, and a number of hard drives (the latest being a SSD I put in yesterday, and the migration assistant restore from time machine worked without skipping a beat
Yes, because it simply copies whatever permissions are there. It doesn't need to (and shouldn't) check whether the logged-on user has permission to anything.
Could this be why the interface is so slow too?
It could be a contributor.
Can you set the permissions on the VM files on your Mac so everyone has read rights? That should at least allow you to restore their backups.

My 27" iMac has just creen issue repaired. I restored from my time machine and now the white screen is back and I am unable to access an recovery option. It looks like its no responding to the USB keyboard

My 27" iMac has just come back from the workshop after having a white screen issue repaired. I restored from my time machine and now the white screen is back and I am unable to access an recovery option. It looks like its no responding to the USB ke

Thanks for your reply! I must apologise for the quality of my post. I inadvertently posted it before it was corrected.
I am very disappointed with this iMac. It is only 18 months old and this will be the third visit to the workshop. I had expected more from Apple and from their repair agents. Luckily I have AppleCare.

Time machine cannot find volume, error-1. Where can I fine solution for this error? Have latest updates for Airport and TM, running Lion.

Time machine cannot find volume, error-1. Where can I fine solution for this error? Have latest updates for Airport Utility and TM, running Lion.

See #C17 in Time Machine - Troubleshooting.

Time machine and 10.5.8

Time Machine backup to my Time Capsule worked great until I installed 10.5.8. My TC is connected to Mac via ethernet cable, and I use tc as my router as well. Now I would consistently get the error message: the volume cannot be mounted. Here's what I've tried so far:
- reboot the system and the time capsule
- repair the sparsebundle via disk utility- it was unrepairable
- repaired permissions
- used airport utility to erase the time capsule
- turned off time machine and reselected the time capsule as the backup volume
- trashed the timemachine .plist and rebooted again
Now when I start time machine a backup volume mounts but is stuck in "preparing mode." When time machine is active, my computer goes haywire- multiple processes and applications begin "not responding" and won't force quit, and I end up having to do a hard restart. I have been browsing threads regarding this issue and can't find any more suggestions other than what I've already tried. any ideas?

Jonathan Clark wrote:
I'm experiencing a similar issue as well
No, you're not. This thread is about wireless Time Machine backups failing with "the volume cannot be mounted." message, due to a problem with the Mozy application.
also since 10.5.8. TimeMachine ran almost non-stop since I updated, and would back up Gigs at a time, even though I had not been changing the drive contents to that level. Now, TM won't run at all because my 500GB drive only has 70GB of space even though there's only one 21GB backup. It appears to have completely deleted a years worth of backups, kept only the latest, and thinks there is no room on the drive. It seems as if it tried to delete all the previous backups but couldn't.
I have never had an issue like this before, and definitely am not trying to back up 500GB at a time.
Start with item #D4 in the Time Machine - Troubleshooting *User Tip* at the top of this forum.
If that doesn't help, please start a *New Topic,* including the results from the Time Tracker app mentioned in that User Tip; what else, if anything, is on your TM drive besides backups, and the messages from the +Time Machine Buddy+ as mentioned in item #A1 of the same User Tip.

Time Machine copy failed with error:28

Usually I just say OK when Time Machine can't complete a backup in either my computer or my wife's, and a couple of months later I get the irritating message again.
This time, it keeps returning.   I have no idea what to do:
Here's a log:
2/16/13 3:46:23.127 PM com.apple.backupd[1325]: Starting automatic backup
2/16/13 3:46:23.914 PM com.apple.backupd[1325]: Backing up to: /Volumes/FreeAgent GoFlex Drive/Backups.backupdb
2/16/13 3:46:29.390 PM AppleMobileSync[1329]: [0x10020c310] |ISyncManager|Warning| Could not retrieve ISyncClient with id com.apple.Keychain!
2/16/13 3:46:29.398 PM SyncServer[1315]: [0x7fd152c0bec0] |SyncManager|Error| sync alert tool for com.apple.Mail is invalid: can't find /System/Library/Frameworks/Message.framework/Resources/MailSync
2/16/13 3:46:29.416 PM com.apple.backupd[1325]: Using file event preflight for Macintosh HD
2/16/13 3:46:36.243 PM com.apple.backupd[1325]: Will copy (8.16 GB) from Macintosh HD
2/16/13 3:46:36.441 PM com.apple.backupd[1325]: Found 1464 files (8.16 GB) needing backup
2/16/13 3:46:36.478 PM com.apple.backupd[1325]: 11.28 GB required (including padding), 13.29 GB available
2/16/13 3:46:43.180 PM Mail[192]: open on /Users/HBrazee/Library/Mail/V2/Mailboxes/Deleted Messages.mbox/9032643A-C8BE-4195-B233-E5A6A64E535C/Data/4/9/Messages/94014.emlx : No such file or directory
2/16/13 3:47:09.883 PM mdworker[1337]: Unable to talk to lsboxd
2/16/13 3:47:09.887 PM mdworker[1335]: Unable to talk to lsboxd
2/16/13 3:47:09.892 PM mdworker[1336]: Unable to talk to lsboxd
2/16/13 3:47:09.896 PM mdworker[1334]: Unable to talk to lsboxd
2/16/13 3:47:10.000 PM kernel[0]: Sandbox: sandboxd(1343) deny mach-lookup com.apple.coresymbolicationd
2/16/13 3:47:10.414 PM sandboxd[1343]: ([1337]) mdworker(1337) deny mach-lookup com.apple.ls.boxd
2/16/13 3:47:10.460 PM sandboxd[1343]: ([1335]) mdworker(1335) deny mach-lookup com.apple.ls.boxd
2/16/13 3:47:10.525 PM sandboxd[1343]: ([1336]) mdworker(1336) deny mach-lookup com.apple.ls.boxd
2/16/13 3:47:10.625 PM sandboxd[1343]: ([1334]) mdworker(1334) deny mach-lookup com.apple.ls.boxd
2/16/13 3:49:19.630 PM mdworker[1359]: Unable to talk to lsboxd
2/16/13 3:49:19.635 PM mdworker[1360]: Unable to talk to lsboxd
2/16/13 3:49:19.711 PM sandboxd[1362]: ([1359]) mdworker(1359) deny mach-lookup com.apple.ls.boxd
2/16/13 3:49:19.716 PM sandboxd[1362]: ([1360]) mdworker(1360) deny mach-lookup com.apple.ls.boxd
2/16/13 3:49:20.000 PM kernel[0]: Sandbox: sandboxd(1362) deny mach-lookup com.apple.coresymbolicationd
2/16/13 3:49:36.358 PM com.apple.usbmuxd[27]: _SendAttachNotification (thread 0x7fff73d59180): Device 1c:ab:a7:98:32:58@fe80::1eab:a7ff:fe98:3258._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
2/16/13 3:49:38.090 PM SyncServer[1365]: [0x7fc8f0c0bec0] |DataManager|Warning| Client com.apple.Mail sync alert tool path /System/Library/Frameworks/Message.framework/Resources/MailSync does not exist.
2/16/13 3:50:01.568 PM iTunes[203]: _NotificationSocketReadCallbackGCD (thread 0x7fff73d59180): Unexpected connection closure...
2/16/13 3:50:01.570 PM ath[254]: _NotificationSocketReadCallbackGCD (thread 0x7fff73d59180): Unexpected connection closure...
2/16/13 3:50:28.401 PM mdworker[1368]: Unable to talk to lsboxd
2/16/13 3:50:28.405 PM mdworker[1367]: Unable to talk to lsboxd
2/16/13 3:50:28.000 PM kernel[0]: Sandbox: sandboxd(1373) deny mach-lookup com.apple.coresymbolicationd
2/16/13 3:50:29.094 PM sandboxd[1373]: ([1368]) mdworker(1368) deny mach-lookup com.apple.ls.boxd
2/16/13 3:50:29.100 PM sandboxd[1373]: ([1367]) mdworker(1367) deny mach-lookup com.apple.ls.boxd
2/16/13 3:52:12.017 PM Mail[192]: open on /Users/HBrazee/Library/Mail/V2/POP-brazee.net/[email protected]/Sent Messages.mbox/9032643A-C8BE-4195-B233-E5A6A64E535C/Data/4/9/Messages/94034.emlx : No such file or directory
2/16/13 3:52:34.652 PM mdworker[1383]: Unable to talk to lsboxd
2/16/13 3:52:34.884 PM mdworker[1384]: Unable to talk to lsboxd
2/16/13 3:52:34.939 PM mdworker[1382]: Unable to talk to lsboxd
2/16/13 3:52:34.950 PM mdworker[1385]: Unable to talk to lsboxd
2/16/13 3:52:34.997 PM sandboxd[1390]: ([1383]) mdworker(1383) deny mach-lookup com.apple.ls.boxd
2/16/13 3:52:35.003 PM sandboxd[1390]: ([1384]) mdworker(1384) deny mach-lookup com.apple.ls.boxd
2/16/13 3:52:35.008 PM sandboxd[1390]: ([1382]) mdworker(1382) deny mach-lookup com.apple.ls.boxd
2/16/13 3:52:35.013 PM sandboxd[1390]: ([1385]) mdworker(1385) deny mach-lookup com.apple.ls.boxd
2/16/13 3:52:35.000 PM kernel[0]: Sandbox: sandboxd(1390) deny mach-lookup com.apple.coresymbolicationd
2/16/13 3:54:21.305 PM Dock[138]: no information back from LS about running process
2/16/13 3:54:21.309 PM lsboxd[233]: @AE relay 61657674:6f646f63
2/16/13 3:54:21.000 PM kernel[0]: Sandbox: sandboxd(1401) deny mach-lookup com.apple.coresymbolicationd
2/16/13 3:54:24.631 PM com.apple.XType.FontHelper[1406]: FontHelper: message received. (<dictionary: 0x7ffc64800c60> { count = 2, contents =
    "query" => <string: 0x7ffc64800dc0> { length = 105, contents = "com_apple_ats_name_postscript == "Arial,Bold" && kMDItemContentTypeTree != com.adobe.postscript-lwfn-font" }
    "restricted" => <bool: 0x7fff74932320>: true
2/16/13 3:54:24.632 PM com.apple.XType.FontHelper[1406]: AutoActivation: scopes (
    "/Library/Application Support/Apple/Fonts"
2/16/13 3:54:24.808 PM com.apple.XType.FontHelper[1406]: FontHelper: message received. (<dictionary: 0x7ffc64800810> { count = 2, contents =
    "query" => <string: 0x7ffc64800970> { length = 111, contents = "com_apple_ats_name_postscript == "Arial,BoldItalic" && kMDItemContentTypeTree != com.adobe.postscript-lwfn-font" }
    "restricted" => <bool: 0x7fff74932320>: true
2/16/13 3:54:24.809 PM com.apple.XType.FontHelper[1406]: AutoActivation: scopes (
    "/Library/Application Support/Apple/Fonts"
2/16/13 3:54:25.052 PM WindowServer[102]: CGXDisableUpdate: UI updates were forcibly disabled by application "Preview" for over 1.00 seconds. Server has re-enabled them.
2/16/13 3:54:25.584 PM WindowServer[102]: reenable_update_for_connection: UI updates were finally reenabled by application "Preview" after 1.53 seconds (server forcibly re-enabled them after 1.00 seconds)
2/16/13 3:54:30.628 PM sandboxd[1401]: ([192]) Mail(192) deny file-read-data /Users/HBrazee/Library/Preferences/com.apple.DownloadAssessment.plist
2/16/13 3:54:49.692 PM mdworker[1411]: Unable to talk to lsboxd
2/16/13 3:54:49.696 PM mdworker[1410]: Unable to talk to lsboxd
2/16/13 3:54:49.818 PM sandboxd[1416]: ([1411]) mdworker(1411) deny mach-lookup com.apple.ls.boxd
2/16/13 3:54:49.823 PM sandboxd[1416]: ([1410]) mdworker(1410) deny mach-lookup com.apple.ls.boxd
2/16/13 3:54:50.000 PM kernel[0]: Sandbox: sandboxd(1416) deny mach-lookup com.apple.coresymbolicationd
2/16/13 3:55:11.964 PM WindowServer[102]: CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
2/16/13 3:55:11.986 PM Mail[192]: open on /Users/HBrazee/Library/Mail/V2/POP-brazee.net/[email protected]/Deleted Messages.mbox/9032643A-C8BE-4195-B233-E5A6A64E535C/Data/4/9/Messages/94057.emlx : No such file or directory
2/16/13 3:57:17.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=1438[GoogleSoftwareUp] clearing CS_VALID
2/16/13 3:57:19.177 PM GoogleSoftwareUpdateDaemon[1440]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending:
    com.google.Keystone.Daemon.UpdateEngine: 2 connection(s)
    com.google.Keystone.Daemon.Administration: 0 connection(s)
2/16/13 3:57:19.332 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateEngine updateProductID:] KSUpdateEngine updating product ID: "com.google.Keystone"
2/16/13 3:57:19.445 PM GoogleSoftwareUpdateDaemon[1440]: -[KSCheckAction performAction] KSCheckAction checking 1 ticket(s).
2/16/13 3:57:19.554 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction starting update check for ticket(s): {(
    <KSTicket:0x585250
        productID=com.google.Keystone
        version=1.1.0.3659
        xc=<KSPathExistenceChecker:0x582eb0 path=/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/>
        serverType=Omaha
        url=https://tools.google.com/service/update2
        creationDate=2010-06-26 00:04:18
    >
Using server: <KSOmahaServer:0x292b10
    engine=<KSDaemonUpdateEngine:0x287110>
    params={
        EngineVersion = "1.1.0.3659";
        ActivesInfo = {
            "com.Google.GoogleEarthPlus.intel" = {
                LastRollCallPingDate = 2013-02-16 08:00:38 +0000;
            "com.google.Chrome" = {
                LastRollCallPingDate = 2013-02-16 08:00:38 +0000;
                LastActiveDate = 2012-11-25 19:27:11 +0000;
                LastActivePingDate = 2012-11-26 08:00:15 +0000;
            "com.google.Keystone" = {
                LastRollCallPingDate = 2013-02-16 08:00:39 +0000;
                LastActivePingDate = 2013-02-16 08:00:39 +0000;
                LastActiveDate = 2013-02-16 22:57:18 +0000;
            "com.google.musicmanager" = {
                LastActivePingDate = 2012-07-29 06:59:48 +0000;
                LastActiveDate = 2012-07-28 19:04:42 +0000;
                LastRollCallPingDate = 2013-02-16 08:00:38 +0000;
        UserInitiated = 0;
        IsSystem = 1;
        OmahaOSVersion = "10.8.2_i486";
        Identity = KeystoneDaemon;
        AllowedSubdomains = (
            ".omaha.sandbox.google.com",
            ".tools.google.com",
            ".www.google.com",
            ".corp.google.com"
>
2/16/13 3:57:19.867 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction running KSServerUpdateRequest: <KSOmahaServerUpdateRequest:0x2973e0
    server=<KSOmahaServer:0x292b10>
    url="https://tools.google.com/service/update2"
    runningFetchers=0
    tickets=1
    activeTickets=0
    rollCallTickets=0
    body=
        <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
        <o:gupdate xmlns:o="http://www.google.com/update2/request" protocol="2.0" version="KeystoneDaemon-1.1.0.3659" ismachine="1">
            <o:os platform="mac" version="MacOSX" sp="10.8.2_i486"></o:os>
            <o:app appid="com.google.Keystone" version="1.1.0.3659" lang="en-us" installage="966" brand="GGLG">
                <o:updatecheck></o:updatecheck>
            </o:app>
        </o:gupdate>
>
2/16/13 3:57:29.555 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction(KSServerUpdateRequestDelegate) serverRequest:fetchedWithResponse:] KSUpdateCheckAction received KSServerUpdateResponse: <KSOmahaServerUpdateResponse:0x298e70
    server=<KSOmahaServer:0x292b10>
    url="https://tools.google.com/service/update2"
    status=200
    tickets=1
    activeTickets=0
    rollCallTickets=0
    data=
        <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
        <gupdate xmlns="http://www.google.com/update2/response" protocol="2.0" server="prod">
            <daystart elapsed_seconds="53810"></daystart>
            <app appid="com.google.Keystone" status="ok">
                <updatecheck status="noupdate"></updatecheck>
            </app>
        </gupdate>
>
2/16/13 3:57:29.864 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction(PrivateMethods) finishAction] KSUpdateCheckAction found updates: {( )}
2/16/13 3:57:29.934 PM GoogleSoftwareUpdateDaemon[1440]: -[KSPrefetchAction performAction] KSPrefetchAction no updates to prefetch.
2/16/13 3:57:29.937 PM GoogleSoftwareUpdateDaemon[1440]: -[KSMultiUpdateAction performAction] KSSilentUpdateAction had no updates to apply.
2/16/13 3:57:29.938 PM GoogleSoftwareUpdateDaemon[1440]: -[KSMultiUpdateAction performAction] KSPromptAction had no updates to apply.
2/16/13 3:57:29.942 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateEngine(PrivateMethods) updateFinish] KSUpdateEngine update processing complete.
2/16/13 3:57:30.431 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateEngine updateAllProducts] KSUpdateEngine updating all installed products.
2/16/13 3:57:30.434 PM GoogleSoftwareUpdateDaemon[1440]: -[KSCheckAction performAction] KSCheckAction checking 2 ticket(s).
2/16/13 3:57:30.476 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction starting update check for ticket(s): {(
    <KSTicket:0x28ec80
        productID=com.google.Chrome
        version=24.0.1312.57
        xc=<KSPathExistenceChecker:0x29adc0 path=/Applications/Google Chrome.app>
        serverType=Omaha
        url=https://tools.google.com/service/update2
        creationDate=2010-06-18 13:11:31
        tagPath=/Applications/Google Chrome.app/Contents/Info.plist
        tagKey=KSChannelID
        brandPath=/Library/Google/Google Chrome Brand.plist
        brandKey=KSBrandID
        versionPath=/Applications/Google Chrome.app/Contents/Info.plist
        versionKey=KSVersion
    >,
    <KSTicket:0x29fe80
        productID=com.google.Keystone
        version=1.1.0.3659
        xc=<KSPathExistenceChecker:0x2977f0 path=/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/>
        serverType=Omaha
        url=https://tools.google.com/service/update2
        creationDate=2010-06-26 00:04:18
    >
Using server: <KSOmahaServer:0x595c80
    engine=<KSDaemonUpdateEngine:0x287110>
    params={
        EngineVersion = "1.1.0.3659";
        ActivesInfo = {
            "com.Google.GoogleEarthPlus.intel" = {
                LastRollCallPingDate = 2013-02-16 08:00:38 +0000;
            "com.google.Chrome" = {
                LastRollCallPingDate = 2013-02-16 08:00:38 +0000;
                LastActiveDate = 2012-11-25 19:27:11 +0000;
                LastActivePingDate = 2012-11-26 08:00:15 +0000;
            "com.google.Keystone" = {
                LastRollCallPingDate = 2013-02-16 08:00:39 +0000;
                LastActivePingDate = 2013-02-16 08:00:39 +0000;
                LastActiveDate = 2013-02-16 22:57:18 +0000;
            "com.google.musicmanager" = {
                LastActivePingDate = 2012-07-29 06:59:48 +0000;
                LastActiveDate = 2012-07-28 19:04:42 +0000;
                LastRollCallPingDate = 2013-02-16 08:00:38 +0000;
        UserInitiated = 0;
        IsSystem = 1;
        OmahaOSVersion = "10.8.2_i486";
        Identity = KeystoneDaemon;
        AllowedSubdomains = (
            ".omaha.sandbox.google.com",
            ".tools.google.com",
            ".www.google.com",
            ".corp.google.com"
>
2/16/13 3:57:30.577 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction running KSServerUpdateRequest: <KSOmahaServerUpdateRequest:0x290140
    server=<KSOmahaServer:0x595c80>
    url="https://tools.google.com/service/update2"
    runningFetchers=0
    tickets=2
    activeTickets=0
    rollCallTickets=0
    body=
        <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
        <o:gupdate xmlns:o="http://www.google.com/update2/request" protocol="2.0" version="KeystoneDaemon-1.1.0.3659" ismachine="1">
            <o:os platform="mac" version="MacOSX" sp="10.8.2_i486"></o:os>
            <o:app appid="com.google.Chrome" version="24.0.1312.57" lang="en-us" installage="974" brand="GGRM">
                <o:updatecheck></o:updatecheck>
            </o:app>
            <o:app appid="com.google.Keystone" version="1.1.0.3659" lang="en-us" installage="966" brand="GGLG">
                <o:updatecheck></o:updatecheck>
            </o:app>
        </o:gupdate>
>
2/16/13 3:57:31.427 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction(KSServerUpdateRequestDelegate) serverRequest:fetchedWithResponse:] KSUpdateCheckAction received KSServerUpdateResponse: <KSOmahaServerUpdateResponse:0x29a970
    server=<KSOmahaServer:0x595c80>
    url="https://tools.google.com/service/update2"
    status=200
    tickets=2
    activeTickets=0
    rollCallTickets=0
    data=
        <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
        <gupdate xmlns="http://www.google.com/update2/response" protocol="2.0" server="prod">
            <daystart elapsed_seconds="53812"></daystart>
            <app appid="com.google.Chrome" status="ok">
                <updatecheck status="noupdate"></updatecheck>
            </app>
            <app appid="com.google.Keystone" status="ok">
                <updatecheck status="noupdate"></updatecheck>
            </app>
        </gupdate>
>
2/16/13 3:57:31.430 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction(PrivateMethods) finishAction] KSUpdateCheckAction found updates: {( )}
2/16/13 3:57:31.479 PM GoogleSoftwareUpdateDaemon[1440]: -[KSPrefetchAction performAction] KSPrefetchAction no updates to prefetch.
2/16/13 3:57:31.480 PM GoogleSoftwareUpdateDaemon[1440]: -[KSMultiUpdateAction performAction] KSSilentUpdateAction had no updates to apply.
2/16/13 3:57:31.482 PM GoogleSoftwareUpdateDaemon[1440]: -[KSMultiUpdateAction performAction] KSPromptAction had no updates to apply.
2/16/13 3:57:31.487 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateEngine(PrivateMethods) updateFinish] KSUpdateEngine update processing complete.
2/16/13 3:57:33.732 PM GoogleSoftwareUpdateDaemon[1440]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending:
    com.google.Keystone.Daemon.UpdateEngine: 1 connection(s)
    com.google.Keystone.Daemon.Administration: 0 connection(s)
2/16/13 3:57:49.201 PM GoogleSoftwareUpdateDaemon[1440]: -[KeystoneDaemon main] GoogleSoftwareUpdateDaemon inactive, shutdown.
2/16/13 3:58:22.082 PM mdworker[1575]: Unable to talk to lsboxd
2/16/13 3:58:22.088 PM mdworker[1576]: Unable to talk to lsboxd
2/16/13 3:58:24.000 PM kernel[0]: Sandbox: sandboxd(1580) deny mach-lookup com.apple.coresymbolicationd
2/16/13 3:58:25.365 PM sandboxd[1580]: ([1575]) mdworker(1575) deny mach-lookup com.apple.ls.boxd
2/16/13 3:58:25.469 PM sandboxd[1580]: ([1576]) mdworker(1576) deny mach-lookup com.apple.ls.boxd
2/16/13 3:59:36.358 PM mdworker[1587]: Unable to talk to lsboxd
2/16/13 3:59:36.362 PM mdworker[1586]: Unable to talk to lsboxd
2/16/13 3:59:36.503 PM sandboxd[1588]: ([1587]) mdworker(1587) deny mach-lookup com.apple.ls.boxd
2/16/13 3:59:36.508 PM sandboxd[1588]: ([1586]) mdworker(1586) deny mach-lookup com.apple.ls.boxd
2/16/13 3:59:36.000 PM kernel[0]: Sandbox: sandboxd(1588) deny mach-lookup com.apple.coresymbolicationd
2/16/13 4:00:08.980 PM firefox[1592]: invalid drawable
2/16/13 4:00:10.701 PM WindowServer[102]: CGXDisableUpdate: UI updates were forcibly disabled by application "Firefox" for over 1.00 seconds. Server has re-enabled them.
2/16/13 4:00:10.813 PM WindowServer[102]: reenable_update_for_connection: UI updates were finally reenabled by application "Firefox" after 1.11 seconds (server forcibly re-enabled them after 1.00 seconds)
2/16/13 4:00:24.543 PM com.apple.usbmuxd[27]: _SendAttachNotification (thread 0x7fff73d59180): Device 1c:ab:a7:98:32:58@fe80::1eab:a7ff:fe98:3258._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
2/16/13 4:00:26.787 PM SyncServer[1604]: [0x7f9f7ac0bec0] |DataManager|Warning| Client com.apple.Mail sync alert tool path /System/Library/Frameworks/Message.framework/Resources/MailSync does not exist.
2/16/13 4:00:30.376 PM mdworker[1594]: Unable to talk to lsboxd
2/16/13 4:00:30.379 PM mdworker[1595]: Unable to talk to lsboxd
2/16/13 4:00:30.468 PM sandboxd[1606]: ([1594]) mdworker(1594) deny mach-lookup com.apple.ls.boxd
2/16/13 4:00:30.481 PM sandboxd[1606]: ([1595]) mdworker(1595) deny mach-lookup com.apple.ls.boxd
2/16/13 4:00:30.000 PM kernel[0]: Sandbox: sandboxd(1606) deny mach-lookup com.apple.coresymbolicationd
2/16/13 4:00:43.702 PM iTunes[203]: _NotificationSocketReadCallbackGCD (thread 0x7fff73d59180): Unexpected connection closure...
2/16/13 4:00:43.705 PM ath[254]: _NotificationSocketReadCallbackGCD (thread 0x7fff73d59180): Unexpected connection closure...
2/16/13 4:01:42.495 PM mdworker[1611]: Unable to talk to lsboxd
2/16/13 4:01:42.499 PM mdworker[1612]: Unable to talk to lsboxd
2/16/13 4:01:42.599 PM sandboxd[1613]: ([1611]) mdworker(1611) deny mach-lookup com.apple.ls.boxd
2/16/13 4:01:42.608 PM sandboxd[1613]: ([1612]) mdworker(1612) deny mach-lookup com.apple.ls.boxd
2/16/13 4:01:42.000 PM kernel[0]: Sandbox: sandboxd(1613) deny mach-lookup com.apple.coresymbolicationd
2/16/13 4:02:01.167 PM WindowServer[102]: CGXSetWindowProperty: Invalid window 0x131
2/16/13 4:02:01.167 PM WindowServer[102]: kCGErrorIllegalArgument: _CGXAddWindowToWindowOrderingGroup: error setting window property
2/16/13 4:02:29.971 PM KernelEventAgent[45]: tid 00000000 received event(s) VQ_LOWDISK (4)
2/16/13 4:02:29.972 PM KernelEventAgent[45]: tid 00000000 type 'hfs', mounted on '/Volumes/FreeAgent GoFlex Drive', from '/dev/disk1s3', low disk
2/16/13 4:02:29.000 PM kernel[0]: HFS: Low Disk: Vol: FreeAgent GoFlex Drive freeblks: 38399, warninglimit: 38400
2/16/13 4:02:55.923 PM KernelEventAgent[45]: tid 00000000 received event(s) VQ_LOWDISK, VQ_VERYLOWDISK (516)
2/16/13 4:02:55.000 PM kernel[0]: HFS: Vol: FreeAgent GoFlex Drive Very Low Disk: freeblks: 25599, dangerlimit: 25600
2/16/13 4:02:55.926 PM KernelEventAgent[45]: tid 00000000 type 'hfs', mounted on '/Volumes/FreeAgent GoFlex Drive', from '/dev/disk1s3', low disk, very low disk
2/16/13 4:02:55.929 PM mds[39]: (Warning) Volume: Indexing reset and suspended on backup volume "/Volumes/FreeAgent GoFlex Drive" because it is low on disk space.
2/16/13 4:03:40.000 PM kernel[0]: memorystatus_thread: idle exiting pid 1474 [cfprefsd]
2/16/13 4:03:43.211 PM com.apple.launchd[1]: (com.apple.XType.FontHelper[1406]) Exited: Killed: 9
2/16/13 4:03:43.000 PM kernel[0]: (default pager): [KERNEL]: ps_select_segment - send HI_WAT_ALERT
2/16/13 4:03:43.000 PM kernel[0]: macx_swapon SUCCESS
2/16/13 4:03:43.000 PM kernel[0]: memorystatus_thread: idle exiting pid 1406 [XType.FontHelper]
2/16/13 4:03:52.000 PM kernel[0]: (default pager): [KERNEL]: ps_select_segment - send HI_WAT_ALERT
2/16/13 4:03:52.000 PM kernel[0]: macx_swapon SUCCESS
2/16/13 4:03:52.849 PM com.apple.launchd[1]: (com.apple.iCloudHelper[1218]) Exited: Killed: 9
2/16/13 4:03:52.000 PM kernel[0]: memorystatus_thread: idle exiting pid 1218 [com.apple.iCloud]
2/16/13 4:03:53.571 PM mdworker[1619]: Unable to talk to lsboxd
2/16/13 4:03:53.000 PM kernel[0]: Sandbox: sandboxd(1627) deny mach-lookup com.apple.coresymbolicationd
2/16/13 4:03:53.585 PM mdworker[1622]: Unable to talk to lsboxd
2/16/13 4:03:53.672 PM sandboxd[1627]: ([1619]) mdworker(1619) deny mach-lookup com.apple.ls.boxd
2/16/13 4:03:53.677 PM sandboxd[1627]: ([1622]) mdworker(1622) deny mach-lookup com.apple.ls.boxd
2/16/13 4:03:53.690 PM mdworker[1621]: Unable to talk to lsboxd
2/16/13 4:03:53.692 PM mdworker[1620]: Unable to talk to lsboxd
2/16/13 4:03:53.711 PM sandboxd[1627]: ([1621]) mdworker(1621) deny mach-lookup com.apple.ls.boxd
2/16/13 4:03:53.786 PM sandboxd[1627]: ([1620]) mdworker(1620) deny mach-lookup com.apple.ls.boxd
2/16/13 4:04:05.629 PM KernelEventAgent[45]: tid 00000000 received event(s) VQ_LOWDISK (4)
2/16/13 4:04:05.629 PM KernelEventAgent[45]: tid 00000000 type 'hfs', mounted on '/Volumes/FreeAgent GoFlex Drive', from '/dev/disk1s3', low disk
2/16/13 4:04:21.928 PM com.apple.backupd[1325]: Stopping backup.
2/16/13 4:04:21.954 PM com.apple.backupd[1325]: Error: (-34) SrcErr:NO Copying /Users/HBrazee/Documents/Virtual Machines.localized/Microsoft Windows XP.vmwarevm/winxp-s003.vmdk to /Volumes/FreeAgent GoFlex Drive/Backups.backupdb/Howard Brazee’s Computer/2013-02-15-184254.inProgress/07592BCC-A3D7-4879-B08D-C01FDDF1895A/Maci ntosh HD/Users/HBrazee/Documents/Virtual Machines.localized/Microsoft Windows XP.vmwarevm
2/16/13 4:05:16.286 PM com.apple.backupd[1325]: Copied 14628 files (14.03 GB) from volume Macintosh HD.
2/16/13 4:05:16.286 PM com.apple.backupd[1325]: Copy stage failed with error:28

>>> Enter Time Machine and manually delete unnecessary backups to make
>>> sufficient room for new ones.
>>
>>
>> I haven't figured out how to do this.   Where is this setting?
>
> I have not figured this out either. But there is a command line
> program tmutil (time machine utility) that can delete backups, and
> also do much more. I am not an expert in this area, so I can only
> suggest that you open a Terminal.app and type
>     man tmutil
>
> Be careful Howard. If Time Machine is not able to delete old backup
> jobs, something is wrong with your backup disk.
If I recall correctly you do this by going on to TM and using one of the
pull down menus in the top apple menu strip ....
I myself am having problems with TM. I erased the external target disk and
started TM again. However it stops wverytime and refuses to backup ..
Telling me there isn't enough room even though the ext space is much
bigger. It also quotes the size of my HD content about 20% bigger than
finder says weird.
Howard (another one...)
============
1. Enter the time Machine
2. Scroll back it time for a few generations
3. Select the folder(s) to delete
4. Under the "Action" item (or gear icon), select the delete option you
want.
=================
> The last couple of days my Time Machine has run out of space during
> backups (error 28).
Just to be certain, is that really "28" or is it "-28"? (I assume it is
a positive error number, as error -28 is
> In the past, when I've seen this, I just say OK, and the problem goes away
> by itself, as it clears up space.
>
> My FreeAgent GoFlex Drive is 1 TB, while my Mac drive is 500.11 GB.
>
> I tried using Disk Utility to fix permissions, but those buttons were
> greyed out.   Disk Utility did not find any problem with the disk.
Repair Permissions is not relevant for Time Machine backups. It only
repairs permissions on files installed by the OS X Installer application
(or the OS installation or preinstalled OS, or Software Update). TM
backups don't qualify.
In any case, Time Machine deletes old backups using root privileges so
it doesn't care about permissions on the backup drive.
> Time Machie preferences show 13.3 GB of 1 TB available.
>
> I haven't been adding stuff to my computer lately more than getting
> mail.
>
> Oldest backup: December 29, 2012
> Latest backup: February 15, 2013
>
> Excluded from backups is the backup drive, my downloads folder, and my
> Mobile Documents folder.
>
> Estimated size of full backup 397.5 GB
Something odd is happening here. Given your described usage, you should
not be chewing through 1 TB of backups in less than three months. I've
gone more than a year on a drive with a similar ratio and not filled it
(and I am backing up my downloads, sometimes two or three times as I
move them to other folders).
Has anything major been done to the computer within that timeframe, e.g.
installing a new hard drive, or erasing the main drive and restoring
from backup? If so, that drive is treated as a new one and would require
another full backup, leaving the old one there.
A similar possibility is if Time Machine thought the computer had been
replaced, which would result in a new backup being started, and would
also leave the old backup unable to be deleted automatically.
In this case, you wouldn't be able to directly access the backups prior
to the change using "Enter Time Machine", but could get to them by
holding down the Option key and choosing "Browse Other Backup Disks"
from the Time Machine menu.
> What suggestions do you have for me to resolve this issue.
Which OS X version are you running?
Have a look in system.log (using Console) to see if Time Machine logged
any relevant information when the backup failed. Look for references to
"backupd" (which is the background software which does Time Machine
backups).
=============

Time Machine And Repair Permissions Error

Similar Messages

Maybe you are looking for