Time Machine - AppleXsoft - file preview and support

Deleted an external drive while trying to install Time Machine. Ran AppleXsoft but downloaded several thousand Jpegs and movies to desktop. Can't file preview like the software says because they say the file isn't suporte and my emails [email protected] keep bouncing back. Anyone been down this road? I have a Macbook Air.

aschmid wrote:
Yes you are right, I know it isn't supported - as so many other things but they work!
This one is notorious for working for a while, then . . . not.
In addition to the problems above I got a pop-up from Time Machine saying the backup file is broken and it needs to create a new one. I told it to go ahead and what happened is that it actually proceeded to DELETE the old backup file before creating a new one - there goes my several months of backup history!
Yes, just as it says in the message. See #C13 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum).
All I can say do now is connect my drive directly to my iMac and figure out a way how I can backup my other iMac and the MacBook I have. On the AE this just worked remotely.
Yeah. Until it didn't.
Really not much options here to backup a home with 3 Macs!?!
Sure there is. Back the others up to the same drive, over your network, via sharing. See #22 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum), for details and setup instructions.

Similar Messages

Time Machine backup file corrupted and locked

This morning when I switch on my Mac there was a dialogue box telling me that my Time Machine backup file was corrupted and that Time Machine would have to create a new backup file.
I am backing up my Macs to a disk connected to my Airport Extreme. It's been working for months without any problems. Other than this morning. Time Machine buddy had the following message:
+Starting standard backup+
+Attempting to mount network destination using URL: afp://[email protected]/MyBookHome+
+Mounted network destination using URL: afp://[email protected]/MyBookHome+
+QUICKCHECK ONLY; FILESYSTEM DIRTY+
+Runtime corruption detected on /Volumes/MyBookHome/iMac27.sparsebundle (fsck_hfs -q termination status: 3)+
+Attempting to mount network destination using URL: afp://[email protected]/MyBookHome+
+Mounted network destination using URL: afp://[email protected]/MyBookHome+
+Backup verification failed for image /Volumes/MyBookHome-2/iMac27.sparsebundle!+
+Moved previous backup image to /Volumes/MyBookHome-2/iMac27_2010-11-01-032949.sparsebundle+
+Recovery backup declined by user.+
+Backup canceled.+
+Ejected Time Machine network volume.+
Has anybody seen something like this before?
I now have a locked and renamed sparsebundle on my disk and backups are not working anymore.

aschmid wrote:
Yes you are right, I know it isn't supported - as so many other things but they work!
This one is notorious for working for a while, then . . . not.
In addition to the problems above I got a pop-up from Time Machine saying the backup file is broken and it needs to create a new one. I told it to go ahead and what happened is that it actually proceeded to DELETE the old backup file before creating a new one - there goes my several months of backup history!
Yes, just as it says in the message. See #C13 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum).
All I can say do now is connect my drive directly to my iMac and figure out a way how I can backup my other iMac and the MacBook I have. On the AE this just worked remotely.
Yeah. Until it didn't.
Really not much options here to backup a home with 3 Macs!?!
Sure there is. Back the others up to the same drive, over your network, via sharing. See #22 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum), for details and setup instructions.

Time machine backup files gone and can't create new backup

Last week I noticed on my Time Machine backup HD that the Backup.backupdb files were gone. Also I am unable to complete backups any longer. I get an error "The backup disk image “/Volumes/Time Machine-2/walle.sparsebundle” could not be accessed (error -1)."
This Volume "Time Machine" is connected to an Airport Extreme 7.6.1. I have ejected the disk, disconnected all users, cycled the power on my computer (2.26Ghx MacBook running 10.7.5), Airport, and HD. All it does after I eject is that it give the Volume a new number...ie instead of "Time Machine" it becomes "Time Machine-1"...then "Time Machine-2" and repeates the error message with the new name. So I cannot start a new backup because of the above error on top of not being able to find my old files.
Thanks for the help

Hmmm.. sorry to jump in but...
I Wish I had seen this before I got mine.
Mine has been doing this auto eject stuff too.
I think I just plugged it in and TM let me select it but is it possible
I should have reformatted it with DU first, like with all the WD drive problems ?
Is it too late for that ?
Or just try to return it or get rid of it ?
TIA

Hi, Question about secure empty trash. I moved some Time Machine backup files to the trash from an external hard drive. Now I can't secure empty trash. It starts, finds 74,003 files, and does nothing. The external hard drive shows it's empty, but it isn't

I moved some time machine backup files from an external USB hard drive to the trash. Tried secure empty trash. It counts 74,003 items, then just sits there. The external hard drive window shows it's empty, but the info pane says it only has 50G of memory left. I left the secure empty trash on over night. It did nothing. Ideas?
Thanks,
Ron

Relaunch the Finder, then from the Finder menu bar, select
Finder ▹ Preferences ▹ Advanced
and uncheck the box marked Empty Trash securely. Try again to empty the Trash.

My Final Cut Projects folder were missing some files, I went to my time machine backup to restore and it said I don't have permission to access the time machine folder "Final Cut Projects". Why?

My Final Cut Projects folder were missing some files, I went to my time machine backup to restore and it said I don't have permission to access the time machine folder "Final Cut Projects". Why?

Yes, I've done all "the ususal suspects.." repaired permissions, zapped pram, "reintroduced Time Machine to the backup drive by turning it off and on... etc

I have a time machine backup file on a USB hard drive. I bought a time capsule / airport extreme, flat 3TB. I wish to transfer the backup file from the usb hard drive to the time capsule hard drive. 10.6.8

I have a time machine backup file on a USB hard drive. I bought a time capsule / airport extreme, flat 3TB. I wish to transfer the backup file from the usb hard drive to the time capsule hard drive. 10.6.8

Unfortunately, Time Machine backups that are stored on a drive that has been connected directly to a Mac are completely different than Time Machine backups that are stored on a Time Capsule.
Frankly, it is not worth the effort and trouble to try to transfer the old backups to the new Time Capsule.....my opinion....having done this in the past.
It is possible though, but I would not recommend it due to the complexity and downsides involved with this. To give you an idea of how to do this, check out this support article.
http://pondini.org/TM/18.html
Even if you transfer the "old" backups over to the Time Capsule successfully, Time Machine will not simply "add on" to the old backups.
Time Machine will make a new complete backup of your Mac and then add incremental backups from that point.
My advice.....start a new backup on the Time Capsule and move forward. Keep the USB hard drive around for a month, maybe 2 or 3 in case you need to go back to an old backup for some reason. At that time, you will not likely need the old backups at all since you will have a current 2-3 month history of new backups. At that point, you can erase the USB drive and use it for another purpose.

Determining the Size of a Time Machine Backup File

When I highlight a Time Machine backup file and then click on Get Info under File to determine the size of the backup file, the disk drive works its heart out, but the Get Info window never arrives at a determination of the file size being seemingly stuck in the "calculating size" state.
Anybody have an idea of what's going on?
JohnnyS

JohnnyS wrote:
Regarding your statement: "If you Enter Time Machine (the "Star Wars" interface), from a Finder window with a "size" column, then browse your backups, you should be able to see the sizes easily." - what do you mean by the "Star Wars" interface?
Ah, you are new to Time Machine. Sorry, that's how you view and restore from your backups. Hold your mouse down on the TM icon in your Menubar and select +*Enter Time Machine,+* or click the TM icon in your Dock, or the +*Time Machine+* app in your Applications folder.
If I look at the pull-down menu under Finder, I do not see Enter Time Machine. Am I looking in the wrong place? Obviously, since I couldn't get by the first step, I never got to a "size" column, and to be honest, I don't know that I have ever seen a Finder window with a "size" column.
You can add one, by selecting View > as List, then View > Show View Options in a Finder window's menubar, and select or de-select whatever columns you want.
I'm a little embarrassed by my lack of knowledge, but if I don't acknowledge my shortcomings, I'll never get the question answered. Thanks for taking your time to try to help me.
Don't be. We all started at zero at one time or another.
I'm not sure just what you were looking for in your first post. The size of all your TM backups is just the amount used on your external disk, unless you have other data in the same partition (which isn't a good idea). Because of the way TM works, you can't really determine the size of an individual backup, and it really wouldn't mean much.
Perhaps if you clarified just what you want to know, we can help answer it.
For more info on Time Machine, you might want to review these:
Time Machine Tutorial
Time Machine 101
How to back up and restore your files
Time Machine Features
Apple - Support - Mac OSX v10.5 Leopard Time Machine
and perhaps browse the Time Machine - Frequently Asked Questions *User Tip* at the top of this forum.
If you have a problem setting-up or using Time Machine, start with the Time Machine - Troubleshooting *User Tip* at the top of this forum. It will show you how to locate the message(s) that describe the problem, then help you fix it.

Can't access Time Machine backups after erase and install

Had iMac checked by Apple Authorized Service Provider after experiencing multiple problems I couldn't fix. No hardware problem. He did an erase and install of 10.5.8. The machine accesses my Time Machine backup, but in Time Machine/ iMacHome/ Sharing & Permissions says, "You can only read." If I access a folder in Home, like Desktop or Documents, it says,"You have no access." Permissions are locked and grayed out.
I spent over two hours on the phone with tech support last evening, and he finally said he'd have to turn it over to Apple engineers, which would take a few days.
Migration assistant only allows "all or nothing" migration, and I need to select just certain folders; I do not want to restore anything that might be corrupted.
Is it possible I could have an undetected hardware problem? Has anyone else done an erase and install and been able to use Time Machine backups to pick and choose what they wanted to restore?

Thank you for your reply. The apple support tech should have known this, but he didn't. However, in the course of our two hour discussion he said "Maybe it's because the computer name is different." I hadn't reached the new-set-up stage where I had changed the name of the computer from Apple's default, so I did that. My short name home folder I had already named the same as before, iMacHome.
But changing the computer name didn't help. After reading your reply, I unlocked the preferences (which were locked and grayed out in TM) to my home folder in the finder and assigned read and write to all folders within for everyone. Back in TM, preferences were no longer grayed out, but changing privileges was. I added iMacHome to the names in addition to staff read & write and everyone read and write. But ImacHome(Me) allows read only, options gray, and even though everyone is read and write, it says "You can only read" and I still cannot access Desktop, Documents, etc...
Fortunately I have a SuperDuper user file backup that I am restoring from, so all is not lost. But it seems to me TM backups should be readily available, and I want to solve this problem. I may still want to go back to a previous month to recover something. But mostly I'd just like to know that TM is a functional backup. It certainly isn't in my case right now.
Don't want to migrate the entire home folder. Too risky. Risky enough to bring over Mail and selected Application Support folders and keychains.
Thanks again. I think your answer is right on, but there must still be something else. I know I have those names correct because I see the old computer name on the sparse bundle, and the old home name in the TM backups. (Haven't read the tips yet. Will do so.)

My Time capsule/time machine stopped backing up and states no disk found-now I can't even get connected to time capsule

My Time capsule/time machine stopped backing up and states no disk found-now I can't even get connected to time capsule. When I go into sys pref and time machine nothing comes up and it just keeps stating rescan

Go to to your Users/Home/Library/Application Support/iWeb folder in the Finder and then enter Time Machine. Go back to the last backup that has the domain file, select it and use the Restore button.
OT

MAC OS 10.7 Trying to Delete from TRASH Time Machine FOLDER (file)

Trying to delete time machine Folder(files) from TRASH. even used secure option, goes through ok. but will not delete from TRASH. files delete from
Time Machine Drive ok, deletion gives you more space on TM DRIVE Time Machine runs ok, How to Delete the Folder (Files) From TRASH?

Hello Mtaff,
Thank you for using Apple Support Communities.
For more information, take a look at:
You can't empty the Trash or move a file to the Trash
http://support.apple.com/kb/ht1526
press Shift-Option or Option key combination while emptying the Trash
Have a nice day,
Mario

Time Machine Restore Mangles Permissions and Groups

Circumstance:
My Macbook Pro running 10.5.5 gave a gray spinner after a restart last week. The restart was to clear out a couple of system processes eating up CPU when I had left it alone for a few hours.
Action:
After Disk Utility, zapping PRAM, and the probably some other standard trouble-shooting actions didn't fix the stuck start-up problem, I decided to try a full system restore from my Time Machine backups. I had previously successfully restored individual folders and files. Time Machine backs up wireless to a USB hard drive connected to my AirPort Extreme. To speed up the restore, I ran an Ethernet cable to the MBP from the Airport. The restore completed successfully. All the folders & files are correct, looks the same, etc. I restarted using the restored boot drive.
Problem:
The MBP is like a museum now--I can look but I can't touch. I first noticed something was wrong after logging in the first time because I couldn't move a file into a folder via drag-n-drop. Then Terminal went into a spinning beach ball when I opened it. Spotlight was not running. Then I noticed that my entire boot disk was read-only. I got info on the boot disk, and the Users & Groups list was strange--everyone was read-only, "wheel" had read-write and was the owner, and staff had read-write. Basically, it's like me, the Finder, an all applications have lost all their write/execute permissions on the entire drive.
*Unsuccessful Steps Taken:*
Ran Disk Utilities' Repair Permissions from Leopard dvd. Ran fsck -fy after mount / -uw from Leopard dvd Terminal and from single-user boot mode. Time Machine restore direct from TM disk via USB. Joined my user to wheel group. Changed my user password from Leopard dvd (which repairs home folder permissions). Played with chown to make all wheel-owned items staff-owned.
*Open Theories:*
Airport Time Machine restores strips ACLs and Permissions. I have to restore over wireless, not ethernet or usb. My TM backup is screwed up somehow.
Whew. This has been going on for a while, so I'm ready to give up and do an Archive & Install and begin manual migration from the backups, but my MPB is a fine-tuned machine and I hate to lose that, especially since it taunts me by being so close to normal (I can see everything! My desktop background and apps are there!).
Any help much appreciated!

The "full restore" from Time Machine is only for OSX drives.
For data-only drives, use the Time Machine browser (the "Star Wars" display). See Time Machine - Frequently Asked Question #15.
Depending on your setup, you may also want to review Transferring Home Folders not on a Startup volume.

TimeMachine not backing up, as hard drive is full. Can the time machine clear old backups and replace them with new?

Time Macine not backing up.
As the harddrive is full, Can the time machine clear old backups, and override them with new backups. For example 5 - 6 days +++ old. Backups were proformed dayly
Any help much appreciated
Many thanks,

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

HT201250 Does Time Machine delete files in back-ups that are deleted on my Mac?

Does Time Machine delete files in back-ups that are deleted on my Mac? IOW....if I need to restore a whole back-up, I don't want to restore previously deleted files.

Does Time Machine delete files in back-ups that are deleted on my Mac?
Not immediately. When space starts to get tight, Time Machine will start to delete the oldest file(s) to make more room, but this won't occur for some time.
if I need to restore a whole back-up, I don't want to restore previously deleted files.
You won't if you choose to restore from a backup that occurred after the date that you deleted the file.
If you absolutely do not want to keep the file in your Time Machine backups at all, you do have the option to go into Time Machine, find the file, and manually delete all versions of the file from past dates.

Time Machine Copied Files

I'm trying to restore time machine backup files that I copied from one hard drive to another. After reading some posts it looks like I might have made a mistake in thinking I could just drag and drop the files. I have the files all starting with cpbfxxxxxxxxxxx. I would like to put them back into time machine but that doesn't seem to work. Any ideas?
Thanks

Hi, and welcome to the forums.
If you copied files from one disk to another, they should still exist on the first disk, unless you deleted them.
Please clarify what you did or want to do: did you copy from your backups to a different disk? Or from one disk to another?
What is your setup: what drives are being backed-up to where?

Will Time Machine delete files on external hard drive?

I have all my itunes music and videos on my external hard drive. Will Time Machine delete these files. The hard drive is already formatted for mac.

Note from Time Machine Help files:
Time Machine works best if you use your backup disk only for Time Machine backups. If you keep files on your backup disk, Time Machine won’t back up those files, and the space available for Time Machine backups will be reduced.
So it will not overwrite the files but it also will not back them up.

Time Machine - AppleXsoft - file preview and support

Similar Messages

Maybe you are looking for