Time machine back up issue continues with Mavericks

I keep getting the errors "Time Machine couldn’t complete the backup to “Time Machine”. "Unable to complete backup. An error occurred while creating the backup folder." anytime Time Machine tries to backup after it goes into Energy Saver mode. I have had this issue since Lion and hoped either Mountian Lion of Mavericks would correct this issue.
I am using a USB 2.0 external HD attached directly to my Mac Mini via USB 3.0. If I restrt my Mac, Time Machine has no issues as long as it doesn't go to Sleep. If it tries to backup after sleep, I get the message.
Any ideas?

Bueller? Anyone have any suggestions?

Similar Messages

Time machine back-up issue in Mavericks

Hello,
I have a query about Time machine back up to an external drive.
Initially, I installed Mavericks and was using the back up disc and everything was running fine.
Then, I had to clean install Mavericks as I had to submit my MBP to repair at Apple store.
Following the return of the machine, I migrated the backup data to my MBP.
Since then, I ran a back up and then it took 3-4 hours where the Time Machine cleaned the old backup. and I presume that it deleted the old back up removing approx 188 GB or the partition of 350 GB. And then, I got a notification that the back up failed, and the message states that it requires minimum of 200 GB and asks me to get a drive with larger capacity.
So I am not sure what to do now. Should I just erase the back up partition? I think it is not advisable.
Please suggest a solution.
I am also confused about the larger size of the back up which requires larger drive for Time machine backup. Is that because of Mavericks?
Thanks,

Time Machine needs to perform a complete system backup after upgrading to Mavericks. Before you erase your Time Machine backup do the following.
Turn off Time Machine in Time Machine's Preferences. Eject and disconnect the backup disk, if it is locally connected (not a Time Capsule).
Select the following line (triple-click to select the entire line), then control-click, and from the contextual menu that appears, select Services > Reveal in Finder:
/Library/Preferences/com.apple.TimeMachine.plist
Drag the selected file directly to the Trash. You will need to authenticate.
This procedure will not delete your existing backups any differently than Time Machine would normally perform that task.
Reconnect your backup device, then from Time Machine's Preferences, turn on Time Machine, select your backup device, then select Back Up Now from the Time Machine icon. TM will remain in "Preparing Backup..." for a long time. When it eventually begins backing up, you may notice that the "backing up xxx of yyy" numbers will appear to change unpredictably. That's normal, and TM activity will return to normal after the initial backup of the Mavericks installation.

SSD/HDD Time Machine Back Up Issue

I am having an issue with my 2010 13" MacBook Pro.
A few months ago I removed the optical drive, replaced it with the existing HDD, and then replaced the HDD with an SSD.
The SSD runs my OS (Mountain Lion 10.8.4) and Applications, while the HDD is where I store my Home Folder.
I did a Time Machine Back Up in March using a SeaGate external hard drive, with no issues.
Last week I updated the Time Machine Back Up using the same external hard drive, but this time something has gone wrong.
I am unable to move files within my system without Finder prompting me for a password.
I am unable to write to any external USB as I do not have 'permission to perform some actions'.
I am unable to connect to external servers via VPNs.
Finder does not open a new window when slected, I am forced to press 'Comman+N' every time.
Numerous other issues.
I have read that it's an issue to do with ACL's, but since my Home Folder is not on my Startup Disk, there is no way for me to do this.
I am the only account on the computer, and both drives have 'Read & Write' permissions.
Does anyone know how to fix this issue?
Please feel free to ask for more details.
Thanks.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; sudo defaults read com.apple.loginwindow LoginHook 2> /dev/null; } | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}' | open -f -a TextEdit
Step 4
ls -1A /e*/{la,mach}* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Time Machine back up issue

Heya Guys!
Not sure this is in the right place so please move it if needed.
Ok, so I have an external hard drive, and I am trying to back up my mac through Time Machine. My issue is that it gets to a certain point where it will say 'The backup was not performed because an error ocurred while copying files to the backup disc. The problem may be temporary. Try again later to back up. If the problem persists, use Disk Utility to repair your backup disk'.
I repair the disc, and I thought I'd figured it out it, but now every single time it tells me to repair the disc. I have bought a brand new hard drive to do this with and it had the same thing.
Also it will get to saying that it has only 148 mb to go, will do it really quick then will go on to back up more data that wasn't there before in the bar, and then will say as above about disc repair.
I have no idea if it is actually backing up, as when I look into my hard drive, the .(file format) is .inprogress and the time machine sign always ends up saying back up failed.
I haven't a clue how to resolve this, so any help would be wonderful. Even if someone could just reassure me that yes it has backed up properly, that would be brilliant.
The hard drive I am using for this is a Seagate GoFlex 500GB and I did buy a Seagate External 1TB that I partitioned so I could use it on a Mac to use it with originally, but reverted back to my GoFlex.
Thanks,
Simon

I've just run Carbon Copy Cloner to back it up too and that has revealed where the problems are. Most of these I already have on my External Hard Drive safe but not the others, and since it is my first ever back up I don't want to delete something off my Hard Drive that I can't get back on it somehow. The problem areas are below:
ATIRadeonX2000GLDriver (located in system/library/extensions/atiradeonx2000gldriver.bundle/contents/macos)
Media Toolbox (located in system/library/privateframeworks/avfoundationcf.framework/support/mediatoolbox/ framework/versions/A/mediatoolbox)
Core AUC (located in system/library/privateframeworks/coreauc.framework/versions/A/coreauc)
I was also told that one of my files needs to be repaired as it failed to open, but I have no idea how to do it. It is located here: /System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner
I'm guessing these are what is causing my issues, but I'm not exactly computer savvy when it comes to these sorts of things, so I don't know whether deleting them is a good idea, especially when I'm not sure if they are on a disc somewhere or not.
Thanks for the help so far guys! :-)
Simon

Time machine back up- TC 3TB - after maverick- never complete

my time machine back up never complete almost finish but stuck at the END.
Stuck for FOREVER and NEVER completed back up YET.
i erase time captule content and start back up as new but still the same.
so i can't use time machine back up anymore?
what is the deal? any solution?
please help.

Hi there RichNads!
I have an article here that can help you troubleshoot this issue with your Time Capsule and backing up your computer. That article can be found here:
Time Machine: Troubleshooting backup issues
http://support.apple.com/kb/ht3275
Thanks for using the Apple Support Communities!
Cheers,
Braden

HT3275 Time Machine back up issue

Hi, I have been using Time Machine for a couple of years backing up to a Tim Capsule. Now getting the following error message "Unable to complete backup. An error occurred while creating the backup folder". Does anyone know what the issue may be?

Standard Lion/Mountain issue.
See C17 Pondini.
http://pondini.org/TM/Troubleshooting.html

Can time machine back up a computer with multiply hard drives?

I have a MacPro with three hard drives in it. I have been very impressed with how Time Machine works on another iMac I have and want to try using Time Machine on the MacPro - BUT - I want to know if Time Machine could handle backing up three different hard drives, and, if so, in the unfortunate event that one of those three hard drives fails, could I get Time Machine to restore just that one drive and leave the other two untouched?
Thanks - Rob

RobRR wrote:
I want to know if Time Machine could handle backing up three different hard drives
Yes, if the drive is large enough.
See #1 and #2 in Time Machine - Frequently Asked Questions.
in the unfortunate event that one of those three hard drives fails, could I get Time Machine to restore just that one drive and leave the other two untouched?
Also yes. OSX drives are restored per #14 in the FAQ, other drives per #15 and/or #E3 in Time Machine - Troubleshooting

Time machine Auto Backup not working with Maverick OS

When I boot up my iMac Desktop my Time Machine desktop icon stays yellow and doesn't auto backup and turn green like before. I have reset the Preferences several times to try and fix the problem but it still has to be manually backed up. Is there a fix available?

I have had success with the following.
I removed the backup drive from the Time Machine system preferences.
Shutdown
Disconnect the drive from the Mac
Reboot
Connect the drive to the Mac
An automatic dialogbox came up asking me if the drive I just connected should be used for Time Machine.
I selected Yes (or whatever the affirmative was)
I let the backup run.
Ever since then I have been whatching the automatic backups work successfully.
YMMV but I wish you the best of luck.

Time Machine Back Up issue - read only?

HI There,
All of a sudden the Time machine could not complete the backup. it says
Files can't be copied on to the backup disk because it appears to be read only.
Any clue why that says that now all of a sudden?
Thanks
Carol

That means your backups are corrupt.
Try Repairing them (not permissions), per #A5 in the Time Machine - Troubleshooting *User Tip,* also at the top of this forum.
If Disk Utility can't repair them, or the +*Repair Disk+* button is grayed-out (meaning OSX has already decided it can't fix them), you're out of options. All you can do is delete the sparse bundle via the Finder, or erase the disk. Use +*Airport Utility.+* Select +*Base Station > Manual Set-Up+* from the Menubar, then Disks in the tool Bar, then Erase.

Time machine back up issue - external hard drive

Bought a new 1T USB 3.0 external hard drive. Backed up fine first time but now my mac is not 'seeing it'. Doesn't show in finder or anywhere, power light doesn't come on on hard drive though I can feel it working ('vibrating and heats up slightly). Sometimes when I plug it in it says drive wasn't ejected properly even though it didn't show in the finder to begin with and power light didn't come on. All ready done software update in first instance. What to do?

Check that the data cable is securely inserted at both ends.
Try a different cable.
If you're connecting the drive through a hub, connect it directly to a built-in port on the Mac.
If you're connecting it directly, try a different port.
Test the drive with another Mac. Test another drive with this Mac.
Boot from your recovery partition (Mac OS X 10.7 or later) or from your installation disc, and launch Disk Utility. Is the drive recognized?
If the drive doesn't work under any of the above conditions, and if another drive does work with the same Mac, then the drive has failed. You may be able to salvage the mechanism by removing it from the enclosure and installing it in another one, or in a drive dock.

Time Machine Size Limit on OS X Mavericks

Before mavericks I was able to set a size limit to time machine back ups, but now on mavericks I cannot.
I used:
sudo defaults write /Library/Preferences/com.apple.TimeMachine MaxSize (size in bytes,i.e. 512000 for 500gb)
In terminal.
But now in mavericks there is no longer a time machine plist, or at least I can't find it anymore.
Does anyone know how to set a limit using mavericks?

same problem here... Have you found any solution?

I have just upgraded to Mavericks and have been using Time Machine on an external disk with Snow Leopard. Can I continue to backup with Time Machine on the same external disk or do I need a new disk since the operating system has changed?

I have just upgraded to Mavericks and have been using Time Machine on an external disk with Snow Leopard. Can I continue to backup with Time Machine on the same external disk or do I need a new disk since the operating system has changed?

Hi there,
I found that Time Machine in Mavericks will sort it all out for you. You shouldn't need to buy another backup drive, unless you have insufficient space left and can't afford to delete whats on there. It should just work fine.

Is a Time Machine back up sufficient if I have a USB pen drive with Mavericks from which to reinstall the OS?

I have used SuperDuper to make bootable back ups in the past, but if Time Machine backs up files on the fly it seems unnecessary to make a full back up from time to time. The bootable backup is easier to restore, but takes up another disk. The chances of both the computer's and the Time Machine disks failing simultaneously are, one hopes, fairly remote.
Any advice or comments appreciated.

Yes you can always boot in recovery mode and restore from the TM backup. If your data is important to you then you should have a secondary backup on another drive for safety. Drives are cheap and you just never know what's could happen. Lightning strikes in a home can fry more than one piece of equipment at one time. If you can't afford a large enough drive for a secondary backup, then a smaller drive could be used to backup just your data files using SuperDuper.
I only have one backup drive myself. But my backup drive is partitioned with TM on one and a SuperDuper clone on the other partition. Even a TM backup can become corrupt or fail. I also just like to have a bootable SD clone in case my internal fails. I can boot from the external SUperDuper clone partition and continue on until my internal could be replaced.

I've updated to yosemite from Mavericks, but since i can't connect to the internet I used my time machine back up which was march 2013. Now my macbook pro won't start and ends with a prohibited ted sign. Any suggestions pls.

I've updated to yosemite from Mavericks, but since i can't connect to the internet I used my time machine back up which was march 2013. Now my macbook pro won't start and ends with a prohibted sign. Any suggestions pls.

Install or Reinstall Yosemite, Mavericks, Mountain Lion, or Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.

IWeb on macbook pro with mavericks cannot import old iWeb files from time machine back up

Hi! The apple store completely wiped my macbook and installed mavericks. I made a time machine back up before bringing it in to be completely wiped. Computer had bad software so they recommended me to handpick items and bring them over to new operating system without completly putting the entire time machine back up on it.
So I did but my only concern is Iweb. Now I got Iweb back installed in mavericks I cannot seem to import any files from my back up to my application in my renewed computer with mavericks. I searched for .domains, sites and sites2 but I cannot extract anything and I still have some old websites stored with Iweb and use the application quite a bit...
Can anyone help?
Thanks a million....

Not sure what you mean by extract but this might help;
If you're running Lion or later the Home/Library folder is invisible and that's where the domian files are located. That folder will be invisible in the TM backups also. Therefore you can extract Domain files one at a time out of the TM backups for import into iPhoto. You would do it as follows:
1 - download and run Find Any File to search for a file named ".site".
FAF can search areas that Spotlight can't like invisible folders, system folders and packages.
2 - the search can take a while due to the structure of the TM backups.
3 - select the backup from which you want to recover the Domain file.
4 - drag the file from the search results window to the Desktop.
If you recover more than one Domain file be sure to rename them after dragging to the Desktop so that you don't overwrite one with the next.
5 - you can put the Domain file(s) in your Home/LIbrary/Application Support/iWeb folder but will have to make the library visible as follows:
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible in Lion or Mt. Lion enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
For Mavericks, 10.9, go to your Home folder and use the View ➙ Show View Optionsmenu to bring the this window:
To open your domain file in Lion or Mountain Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

Time machine back up issue continues with Mavericks

Similar Messages

Maybe you are looking for