Time machine back ups gone after back up of new MCP

I have a new MCP and after migrating data performed a new back up with the new one. Now I can only see back ups to three days ago in both my Rime Machine and manual view. I had 3 years of selected back ups on it. Please help.

Ack...please disregard, found them.

Similar Messages

Can I use a mountain lion time machine back up on new mavericks macs?

My macbook retina was stolen at my school. I was wondering because I used time machine having mountain lion, does it affect anything when if i purchase a mavericks macbook pro? the just announced one. I have all my pictures (iphoto) in that last back up. Can i use a mountain lion time machine back up on new mavericks macs? My macbook retina was stolen on August 16? So I don't know if there was an update on my mac that might affect it in any way...

It's ok you can use your ML TM to transfer your account. iPhoto library and other things will be upgraded when you open the apps.
At the end of the Apple article it says:
Migrating a Time Machine backup to a new Mac
When you get a new Mac, you can transfer all of your applications, files, settings, and other information from a Time Machine backup you've already made. When you start up your new Mac for the first time, the Setup Assistant asks you if you would like to restore from backup. If you've already set up your new Mac, you can use theMigration Assistant (located in Applications/Utilities) to do the same thing.
After Migration Assistant completes the transfer and you select your existing Time Machine backup drive, you will be prompted with "Inherit Backup History". Once selected you will be able to continue to use your existing Time Machine backup on your new Mac.

How to transfer time machine back up to new hard drive

How to transfer time machine back up to new hard drive?

You may like to take a look at this thread... https://discussions.apple.com/thread/4207670?start=0&tstart=0

Problems Copying Time Machine Back-Up to New Hard Disk

I tried copying my old time machine back-ups from a 500 GB WD HDD to a new Seagate 1TB. Followed the instructions from "Time Machine: How to transfer backups from the current backup drive to a new backup drive". Although terribly slow it seemed to work all well initially. Had it run over night, then discovered the next morning the process was apparently hanging.
Thinking that maybe the energy saver options were the cause of the problem, I unchecked "put hard disk to sleep when possible". So went through the same painful process. Cannot believe that after about 7 h of transfering the whole thing is stuck again:
More than 2 million items were apparently copied, now nothing is happening at all... (neither GB nor minutes changing anymore)
1) Is this a common problem? More importantly: how can it be solved?
2) Is there another way to transfer time machine back-ups to another hard disk?
Thanks!

This is getting (more) annoying: turned out that something went wrong with the 500 GB HDD with the original time machine back-up. Managed to repair it in the 3rd attempt with disk utility. Heard of SuperDuper and thought I'd give it a try.
Cloning the back-up disk to the new 1 TB HDD seemed to work well, but I am a bit surprised with the result:
It seems time machine recognizes now the 1 TB Seagate HDD as a 500 GB (the size of the original WD) only?

Transfer Time machine back up to new device

Dear,
Could anyone help me to solve the problem with transfering time machine back up to the new hard drive,
I am facing the problem " If the drive is formatted as Mac OS Extended but without journaling, OS X may state that "the volume has the wrong case sensitivity" to be used as a back up disk."
Does anyone know how to solve it
Thanks in advance

Well I'm not sure the tm backup will install/copy to the new drive without the case-sensitive format. Actually that is a poor format to use as it can cause problems down the road with installing software and other things. Not sure why your original drive was formatted like that. It really is not a recommended format. Not sure why apple still makes it available. If the tm backup won't load then you'll need to repartition and format the drive Mac OS Extended (Journaled Case-sensitive) which is also a option in disk utility.

Access individual files on old Mac time machine back up from new Mac

Hi
I have a never Mac Book Pro with 10.9.1 I am using now. I have a old time machine on a external drive that was made with a old Mac Pro The time machine back up is over 15 TB and I no longer own the Mac Pro used to make the time machine backups. I want to access the old time machine back up and copy over a only a few files I need about 500. I cannot use migration assistant because I cannot move the entire back up as the entire back is too big.
Thanks

right click on the folder that shows with the red negative sign, and select to "get info". In the long skinny window that appears, look in the "sharing and permissions" section. In the "name" column, you should see your current user name. Ensure the "privilege" is set to Read and Write. If your user name is not in the name column, click the + sign, and add it, ensuring the privileges are set to Read and Write

Brand new iMac want to install previous data from Time Machine back up, brand new iMac want to install previous data from Time Machine back up

I am waiting on a brand new iMac to repace my 2007 iMac. I have a Time Capsule and use Time Machine for auto back ups. What do I need to do transfer all data from my older iMac to my new one? I am not running Mavericks on the older iMac but have upgraded all along till the Mavericks free upgrade. Do I need to update the older Mac to Mavericks to make the restore easier.
Thanks for any guidance,
JTMav

PowerPC = PPC, this is the architechture of microproccors that Apple used prior to 2006 when they transitioned to Intel based microprocessors. Apple supported PPC based apps from 2006 to about 2012 when Lion (10.7.x) was first introduced. They gave users 6 years to upgrade all of their legacy apps to Intel based apps. Even after 6+ years some users still complained because their old apps would not run with new versions of OS X, that is technology though.
You might still have PPC based apps, if you do and you want to use them they need to be upgraded or replaced. I have noted a link to an article that will help walk you through to see if you have any PPC based apps. If you do then you can decide if you want to continue using them or upgrade.
http://osxdaily.com/2011/07/15/how-to-check-if-applications-are-incompatible-wit h-mac-os-x-lion/

Restoring time machine back up to new hard drive

Today, I went to a computer store and had the hard drive replaced on my Macbook Pro 2008 model. I was running snow leopard, but with the update the guy updated my OS to Mavericks, he hasn't put anything else on the computer though.
What I want to do is restore back up from time machine (situated on an external hard drive). However I don't want my system to glitch or revert back to Snow Leopard. I want the back up to run on Mavericks. What is the best way to run this back up?

Hey jshark1,
You can use Apple's Migration Assistant (located in /Applications/Utilities) to bring your data to your new system hard drive. See this article for an overview of how to do it -
Move your data to a new Mac - Apple Support
While the article is about transferring the information from another computer, it also allows you to do so from a Time Machine backup. Start from the sections labeled Choose a connection method.
Thanks for using Apple Support Communities.
Be well,
Brett L

Time machine backup files gone and can't create new backup

Last week I noticed on my Time Machine backup HD that the Backup.backupdb files were gone. Also I am unable to complete backups any longer. I get an error "The backup disk image “/Volumes/Time Machine-2/walle.sparsebundle” could not be accessed (error -1)."
This Volume "Time Machine" is connected to an Airport Extreme 7.6.1. I have ejected the disk, disconnected all users, cycled the power on my computer (2.26Ghx MacBook running 10.7.5), Airport, and HD. All it does after I eject is that it give the Volume a new number...ie instead of "Time Machine" it becomes "Time Machine-1"...then "Time Machine-2" and repeates the error message with the new name. So I cannot start a new backup because of the above error on top of not being able to find my old files.
Thanks for the help

Hmmm.. sorry to jump in but...
I Wish I had seen this before I got mine.
Mine has been doing this auto eject stuff too.
I think I just plugged it in and TM let me select it but is it possible
I should have reformatted it with DU first, like with all the WD drive problems ?
Is it too late for that ?
Or just try to return it or get rid of it ?
TIA

Transferring from time machine onto my mac after its had a new hard drive installed.

I have a new hard drive in my iMac, using Mavericks 10.9.5.
I would like to restore from Time Machine, all my info.
The Apple video "Time Machine Basics" talks about "migrating to a new mac" and this is straightforward, but I already have logged into my new mac! I don't have the option to migrate.
How do I go back into Time Capsule for the first time?
If I just open Time Machine and start backing up my "empty new hard drive" onto the Time Capsule which contains the saved info from before, will I then be able to then just go back to the previous saved dates? Does that make sense?

Thank you, that makes sense, however, I've only just realised that I'm logged onto the new Hard Drive as "Test".
When I plugged it in, and turned it on, it just opened up like that, without me needing to log in as 'me' yet?
Is this ok, and the best option to do as you suggest?

Time machine was not working. I bought a new time machine and migrated time machine files to new time capsule; not recognized by yosemite

Time machine was not working after yosemite upgrade on new and old MacBooks in my house. I bought a new time machine and migrated time machine files to new time capsule. I changed the names of the older sparse bundles to the default values. Yosemite still does not recognize them.

I presume the bought a time machine means a time capsule.
How did you migrate the Time Machine files?
From where? A Time Capsule or external drive?
It is difficult to get TM working with Yosemite.. since it doesn't work after the upgrade on the old TM backup.. it will not work on the migrated files either.
You simply start a new backup and store the old backups for a few months until you are ready to dump them.
The instructions for inheriting old backups is B5 and B6 here.
http://pondini.org/TM/Troubleshooting.html
However it is just unlikely to work.. TM in Yosemite is very different. Broken even.
I also strongly recommend people to use Carbon Copy Cloner or some other 3rd party backup until Apple get the bugs fixed. And after several months.. they are still rampant.

Will existing Time Machine back ups build after 1 account migration

I have one i-Mac happily backing up with Time Machine to an external hard drive.
I have just bought a second i-mac (the old one's filling up) and propose to use migration assistant to move an admin account from the old to the new i-mac leaving two other accounts (and their files etc) on the old one. I see from some posts that it seems as if Time Machine will start a new back up series for the new i-mac's back ups (cos its a new MAC address). But what about the old i-mac? Will that continue to extend the existing (old) Time Machine back up files, albeit without my transferred account and its files? I'd like to end up with the old i-mac continuing to work with and build its Time Machine back ups (less my account and its new files) and have a new back up series from the new i-mac building to a separate partition on the external drive.
Second minor point: I have read that putting a partition on the external drive is the best way forward as it will stop competition for space and allow changes in one set up in future to have no impact on the other. Is this the best way forward?
Does this all make sense?
Sorry but I can't see an answer in the forum to what must be a reasonably common issue in this expanding mac world.

I then tried to move it (TM back up files) off with Restore, whilst preserving the TM back ups but I couldn't seem to do it to the i-Macs hard drive nor to partition that to allow this to happen (assuming the lack of a discrete partition was the problem).
That's likely correct. This only works if you restore one entire partition to another, and check the +Erase destination+ box.
The problem was that I could not (maybe for the same contiguous reasons) create a new partition on the old i-Mac just to temporarily move the TM back up to. Without it I could not 'empty' the WDC firewire drive and partition it prior to returning the TM back ups to it albeit contiguously in a dedicated partition.
Unfortunately for me to retain the TM back ups for the account I moved to the new i-Mac, I will have to leave that account on the old i-Mac as well. I can't see a way around that? If I delete the account on it then surely I will lose the ability to Log onto it and then to click TM and see back in time on that account?
If I understand you correctly, that will be true eventually, but not immediately, as TM will, eventually, delete it's copies of anything that's no longer on your internal HD. That will depend, of course, on how long TM can keep it's backups. But while they're still there, if you log on with Admin privileges, you should be able to view the old backups.
Not sure I explained myself clearly. Sorry. Having understood from your earlier help that 'migrate' actually means 'make a copy in another place', I have the migrated account in two places: one now dormant, on the old i-Mac and two, where it is migrated to (the new i-Mac). But TM continues to back up all accounts, indeed everything, on the old i-Mac by dint of its MAC address. So to see the migrated account's past history I assume I have to access the version on the old i-Mac. To put it another way, when logged into one account on the old i-Mac I believe it is not possible to see the TM history and files of another account on that i-Mac despite TM backing the entire HD. You have to be logged in to that account to see it. On the new i-Mac, with its different MAC address, TM is busy creating the first TM back up and I assumed that in the migrate it did not bring TM history as I had read that it is MAC address specific.
The only issue (apart from having this account's history spread over two machines (pre-today on the old i-Mac's TM and today onwards on the new i-Mac) is that I have all the files on both machines. I am not worried about security only unnecessary usage of disk space. It isn't critical, there's lots of it, but it just seems wasteful and untidy. Unless you guys know otherwise?
If I understand what you've done, you do have duplicates of the current contents, but only one copy of the old backups (on the old F/W drive).
On the old i-Mac I have the two accounts I wanted to stay there plus the now dormant account I migrated. TM continues to work away at memorising ALL these although there will be no further changes to the dormant migrated account as I will not be running it on the old i-Mac. On the new i-Mac I have the migrated account of which TM is now creating its first (huge) back up but starting today. There is no history here. So I have copies of everything; its just that the old history of the migrated account remains on the old i-Mac and a new history (does that make sense?) is building from the new one. My point was that if I were to delete the dormant account from the old i-Mac, then I could not access it to use TM with it. I believe TM only shows the history of the account and screen you're in at the time?
There is an option in TM that will allow you to selectively +Delete all backups of+ selected items. +Enter Time Machine,+ locate and select the item(s), click the "gear" icon in the Finder window's toolbar, and select the +Delete all backups of ..+ option.
What you can't do is, keep the backups of only previous versions of things that were changed or deleted. It's all or nothing.
Not sure I understand this. What would have been nice but I do not think is possible is to have moved the account to the new i-Mac together with the TM's back ups of that account and continue to build it up (whilst having access to its history) on the new i-Mac. If that were (is?) possible I could have totally deleted the old account and with it its files from the old i-Mac, freed up some HD space and had a full AND growing TM history all on the new i-Mac.
Many thanks for staying the course and for your continuing help.

How do I delete Time-Machine back-ups on external HD

Hello everybody, I would like to delete all the Time Machine back-ups on my external hard drive and create a new full back-up. This is because after several months my HDD is quickly filling up and I would like to clean out all the old back-ups. What is the best way to do this? Sould I simply delete the old back-ups through finder, or is there another and better way to do this? Many thanks for your help!

peiper1 wrote:
....... the suggestion to enter the TM "Star Wars" display only applies to back-ups residing on my internal SSD, right? ...
No.
peiper1 wrote:
...Also, if TM is backed up to an external HDD, why does it also keep back-ups on the MBA's internal SSD?
As far as I know it doesn't. You may be meaning this...
Time Machine Local Snapshots Laptops
http://support.apple.com/kb/HT4878
peiper1 wrote:
.. I would like to delete the back-ups on my external hard drive, do I still do it the same way? ...
Follow Pondinis Instructions for Deleting Backups on the TM external Drive.

Complicated corrupted main drive and lost Time Machine back-ups question

Here's tough one I can't pin down answers to: I have an iMac Early 2008 running Lion. The main hard drive system (probably) corrupted over the course of 2-3 months until it became unusable. I had Sophos on it, but removed it about a month ago and reliability improved but only for about a week. Finally the hard drive crashed. I used the Recovery partition while able to have Disk Utility add a second partition to my back-up drive, which contains Time Machine back-ups, my iPhoto folder and a few other files but no system. I installed Snow Leopard from disk to the new partition, checked the first partition, which seemed fine, then upgraded the Snow Leopard partition to Lion and updated and ran under a temporary user. Next I explored the main drive, which Disk Utility said was fine, but doesn't always show up. While in Disk Utility, I noticed that the first partition on the back-up drive showed up as empty! After some panicking, I've a second back-up drive on the way, but how do I access the TIme Machine back-ups, get my original user back and get access to over 15 years of files that are locked into that user?
My (2nd) back-up drive arrives tomorrow, so I'll able to get to work soon.
Thanks for any help.

Ok so wahat you mean is I need to name a partition "Time machine" in order for TM to back up any volumes and TM will always start with the volume titled Timemachine ?
so as I stated
A. All my OS applications _________Rename this to time machine or can I ues the volume name it is now?
B. All my files for those applications ---------Once that is done TM will back this up?
C. All My Itunes / Music etc---------Once that is done TM will back this u last?
Also I did a test run and I geet the error msg that the backup disk of my OS needs 1.36 TB but only 1.34 exists. The orignal OS disk has only 232GB of data why is tome machine asking for all that space?
I set the partition at 1.34 so there would be way more than enough space to copy.
R

Time machine back ups missing

My time machine back ups fail because it says the disc does not have enough room.
It was working fine.
My back ups are going to an external 1TB hard drive.
When I open the backups.backupdb folder, there is only one file in the folder now instead of the multiple files I usually see. The single file is only 24K.
I know the previous backups must be there because the hard drive is nearly full. It appears that it has lost track of the files. I tried removing the back up drive in the Time Machine preferences and reselecting the drive, but since it's nearly full, it will not use it for back ups.
I have ran disc utility to repair permissions as well as Disc Warrior and TechTool Pro to try & repair the disc, but so far nothing has worked.
I've also deleted the com.apple.TimeMachine.plist file, but that didn't fix it either.

This procedure is a diagnostic test. It makes no changes to your data.
Please triple-click anywhere in the line below on this page to select it:
ls -@Oaen /V*/* | pbcopy
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
Wait for a new line ending in a dollar sign (“$”) to appear below what you entered.
The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
If any personal information appears in the output, anonymize before posting, but don’t remove the context.

I have 2 macbooks each with an account for me and one for my wife. I use one Macbook logged in with my account and my wife uses the other Macbook only loged in on her account. We both make regular time-machine back-ups each on a separate external disk

I have 2 Macbooks each with an account for me and one for my wife. I use one Macbook logged in with my account and my wife uses the other Macbook only logged in on her account. We both make regular time-machine back-ups each on a separate external disk. Is it possible to update her account on my macbook using her external disk without overwriting my stuff on the same Macbook and vice versa?

Time Machine does not do individual accounts. It records the complete drive. So if you were to use her TM backup on your Mac it would make your Mac just like hers. Both yours and her account on your MAC.
Just copy the missing files over from her Mac to yours. If there are differennt programs on each then they would need to be installed on both.

Time machine back ups gone after back up of new MCP

Similar Messages

Maybe you are looking for