Time Machine backup after upgrading from 10.6

Hi all,
I'm planning to upgrade from 10.6.8 to 10.7 on a MacBook from 2007, and I have a question about my Time Machine set-up. I have this backing up on an external HD, and I am wondering if, when I've upgraded to 10.7, the Time Machine software will access the same set-up I had in 10.6.8? Will it just pick up from where 10.6.8 left off or will I have to start again?
Thanks,
David

Sadly, after a few successful backups, the same old folder message came roaring back.
Console says:
11/8/11 11:39:48.506 PM com.apple.backupd: Starting standard backup
11/8/11 11:39:48.632 PM com.apple.backupd: Backing up to: /Volumes/VERBATIM BU/Backups.backupdb
11/8/11 11:39:49.456 PM com.apple.backupd: 2011-11-08 23:39:49.431 FindSystemFiles[97145:f07] Looking for system packages
11/8/11 11:39:58.046 PM com.apple.backupd: 2011-11-08 23:39:58.045 FindSystemFiles[97145:f07] Using system path cache v`56'.
11/8/11 11:39:58.454 PM com.apple.backupd: Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/VERBATIM BU/Backups.backupdb/RonViMac3h size:37
11/8/11 11:39:58.501 PM com.apple.backupd: Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/VERBATIM BU/Backups.backupdb/RonViMac3h size:37
11/8/11 11:40:08.530 PM com.apple.backupd: Backup failed with error: 2
Google says that lots of people are having this problem after upgrading to Lion. Clearly not everyone, but those of us HAVING the Lion problem must have something in common!

Similar Messages

Extremely Slow Time Machine Backup after upgrading to 10.8.3

Time machine backups are taking an extremely long time on my retina MacBook Pro 13 inch after upgrading to 10.8.3. It's taking many minutes just for a kilobyte to be backed up. I've tested transferring something to the disk and it's lightening fast so there's nothing wrong with the disk.
Is anyone having similar issues or know of a fix?

I had the same problem with slow backups. Called Apple 5 times and went through all the hoops checking plists, airport, and then erasing using my airport utility and the first backup of about 25-30 gigs went fine, but the second backup would take between 1-2 hours. By the time it was finished it was ready to do another backup.
After looking at community fixes I found that my Comcast Norton Anti Virus was the problem. Upon speaking for the 6th time to Apple I was told that should have been the first thing they asked, since antivirus programs check each file going to the time capsule. Even unchecking the scan external drives did not help.
I removed the Norton AV from my system and replaced it with the IAV from apple store (free) and my backups are back to normal. I timed a 100 meg using Ethernet/LAN and it took 9 minutes 32 seconds from clicking backup now, searching for backups, preparing backup, backingup, and cleanup. My Wifi connection on 10 megs took only 1 minute 29 seconds.
Now my backups run so fast I don't even see them working. Also the constant updates to Norton were casuing my backups to be 100 megs or more each time due to daily Norton updates. Now I get backups in the order of 10-20 megs - depending up what I have put on the machine. If I put music on it increases the size of the files installed.
I recommend anyone having this slow time capsule problem to turn off your full antivirus program no matter what you are using and watch the difference in speed. I am so happy! No more 2 hour backups and 45 minutes to 1 hour preparing backup! good luck

Imac keeps crashing in time machine backup after upgrade to mountain lion

2008 imac kept crashing (shutdown and restart) during first backup after upgraded to mountain lion. The backup size was about 10GB but time machine crashed after a while (at most 2GB) and never completed backup. So, I don't have any backup since right before I upgraded from Lion. Any suggestion?

Something strange happened. I was able to get time machine to work by going out to the login screen (the account kept logged in) and let it run the backup with the screen off (screen auto off after a few min). I tried it on two different external drives and that did the trick on both. Since the initial Mountain Lion backup was huge (155 GB), I was quite surprise that it worked at all. I assume your MBP was a Lion to ML. I also just did a 2012 MBP upgrade but that one was smoother. I did not recall having crashing issue. One thing I did find during this was that my WD passport USB drive was corrupted. Not sure it was the cause or not. I had to erase and reformat to get it back to work. Maybe do a verify disk to confirm. Good luck.

How can I restore my old iTunes Time Machine backup after upgrading to Mavericks?

I previously had Snow Leopard, and am wondering how I can simply restore ONLY my iTunes library from my Time Machine backup, last made only a few days ago when I had Snow Leopard. However, I seem to be unable to access anything backed up before I installed Mavericks. Any help would be great, because I'd hate to have to struggle to locate 160GB of music manually.
Many thanks!

Your choice really. Either way will work. Retaining the older backups gives you a way to restore older files. When I upgrade from 10.8 to 10.9, the backups continued without errors. Depending on what you upgraded from, in 10.8/9 you have the option to backup to 2 separate drives thus giving you some protection in case one drive fails. You can either copy the old backup to a new drive (Disk Utility/Restore seems to work best) or start a new one.

Can't reconnect to Time Machine backups after upgrade to Yosemite

I did a clean install of Yosemite and restored the user accounts from my time machine backup. I reconnected to the time machine backup on my time capsule and performed a backup. That went fine.
Now I can't access any of the backups made before I upgraded to Yosemite. They all show up in the history bar on the right in time machine but when I click on a backup nothing loads. I've run a verify on the backup and it passes. Looking at the backup file it has 400GB of data, the same as before the upgrade to Yosemite.
Any ideas why I can't access the backups?
Thanks,
Marvin

While in Time Machine, press the key combination shift-command-C. The front window will show all mounted volumes. All snapshots should now be accessible. Select the one you want and navigate to the files you want to restore.
If you need to restore from a backup of the hidden user Library folder, first select a snapshot, then press shift-command-G. A Go to Folder dialog will open. In it, you'll enter the path to the folder. The dialog will help you by automatically completing the parts of the path when you start to type them.
The path begins with slash character ("/"). Enter that. The rest of the parts will be separated by slashes.
The next part is the date and time of the current snapshot. Enter a "2", and the rest of the date should be filled in automatically. Press the right-arrow key to jump to the end of the path. Enter a slash to start the next part.
Next is the name of the volume (usually "Macintosh HD" unless you gave it a different name.) Start to type that, then jump to the end and enter a slash.
The next part is "Users", followed by a slash.
Next is your (short) user name, which is also the name of your home folder.
Finally, enter "Library", then press return. You should now be in the Library folder. From there you can get around as in the Finder.

Unable to access time machine backups after upgrade

I have an airport extreme with an USB disk that I've been using with my 10.8 system.
I've decided to format and do a clean install of mavericks. After that even tough I can access the timemachine and see scroll with the mouse I can't use the arrows or select anything.
Any ideas?
Regards.

desbiss wrote:
After transferring all my data over to the new profile and setting everything back up as I like I deleted the old (presumably corrupt) user profile. To my dismay I no longer have access to any of my time machine backups that were created prior to setting up my new user profile... They appear to still all be there. However, I am unable to select any of the dates prior to the new user profile's creation and the deletion of the old profile...
That's correct. What you see in Time Machine's "Star Wars" display depends on what you have the Finder window set to. While looking at the new profile, you can't see any backups that were done before it existed.
You're right, they're still there, for now, but are grayed-out in the timeline at the right, because what's in the Finder window wasn't backed-up then.
If you select your internal HD or Computer Name in the sidebar, you'll be able to see those backups.
But since they're for a different user, you won't be able to view inside that home folder or restore from it -- one user, even an Admin user, doesn't normally have access to a different user's data.
It's doubtful, but you might be able to create a new user with exactly the same name as the one you deleted, log on to it, and see if the old backups appear.

Cannot Access Earlier Time Machine Backups After Upgrade To Mountain lion

I went into Time Machine to recover some past emails. It shows that it had backed up my emails for the last year, however it will not let me recover anything before my upgrade to mountain lion. Does anyone know of a workaround for this problem. Thank you.

Christopher Sant wrote:
Once it does finally recognize (after a good while) it simply says "Error, time machine could not complete the backup"
There should be more to that message. See #C2 in Time Machine - Troubleshooting. It will show you how to locate the message(s) that describe the problem, then help you fix it. If that doesn't help, post back with details, including all the messages, your setup, what you've done, and the results.

How can I access old Time Machine backups after restoring from Time Machine?

Just restored my iMac and I can only see "Now" when I enter Time Machine. How can I see all the backups and dates I had before I restored?

While in Time Machine, press the key combination shift-command-C. The front window will show all mounted volumes. All snapshots should now be accessible. Select the one you want and navigate to the files you want to restore.

Time Machine Backups after recent upgrade to Mountain Lion

Basically to keep a long story short - i need to take my computer in for repair tomorrow. I recently did an upgrade to Mountain Lion a day or two ago. I haven't done a Time Machine backup until today (a couple days after i upgraded to Mountain Lion) because i wanted to make sure that my previous TM backup (Snow Leopard 10.6.8) was the most up to date and best update that i could revert back to if i had any issues with Mountain Lion, or any application compatibility, etc etc.
I don't have any broken applications and it seems like Mountain Lion is running better than Snow Leopard. However, as i said - i'm taking my computer in for repair tomorrow, i would like to know that i have the most up to date Time Machine backup with the new Mountain Lion so that when i restore it back from my Time Machine backup after i get it back from repair, i won't have any issues with the migration, which could potentially lead me into more technicalities.
I have a 500GB Harddrive, with about 70GB left of free space....I did the initial backup prior to upgrading to Mountain Lion, and it upgraded 400+GB of info, now, since Mountain Lion - the first backup with Mountain Lion initially said 46GB - then it went down to 14GB by the time it was all said and done....so what exactly did it back up?
Did it back up all the necessary files to keep Mountain Lion running smoothly when i restore it back to the way it was after i get it back? Did it not back everything up that it needs to? Is it safe to erase my internal drive and do a clean installation so i can take it in, and not worry about not being able to migrate things back over or applications not working correctly?
When i get it back, i presume it will come with Mountain Lion back on it and i can just boot up into the Recovery Disk and restore it from a Time Machine backup that way, correct?
Thanks for the help.
- Jason

I received the same error and experienced the same issue that you have described but after performing a Time Capsule soft reset and then toggling the TM Off and then back On I was able issue a backup now and see my previous backups.
Here is the link to where I posted my fix; https://discussions.apple.com/message/19069543#19069543. Someone else had success using a different method. The only comment / complaint that I have since the ML OS X upgrade is that TM now takes at least 20 to 30 seconds before I can click/select a backup.
I hope this helps.

Is it possible to downgrade to mountain lion with the help of a time machine backup after having updated to Mavericks?

Is it possible to downgrade to mountain lion with the help of a time machine backup after having updated to Mavericks?

Just to be clear, if by downgrade you mean uninstall, then the answer is technically, no.
You can't uninstall an OS. You can erase and re-install the old OS, but if you don't have a prior backup of your data, you'll lose it during the erase procedure.

Can I Update Time Machine Backup Without Booting From The Source Drive

Greetings,
Can I update a time machine backup without booting from the original source drive?
My main Macbook Pro internal drive seemed to have died. I had not backed up in months so my Time Machine backup was old.
I replaced the drive with a new one and settled for restoring from the old TM backup because my latest info was on the dead drive and not backed up.
I just plugged the "broken" drive into a dock and it mounted.
It won't boot from the drive but I can mount it and copy from it so far.
I now want to update my Time Machine backup with the info on the 'broken" drive while it's able to be mounted.
How can I accomplish this without booting from the 'broken" drive and running time machine.
Recap...
I need to update a Time Machine backup using another hard drive without booting from the source (as I cannot). Both drives are connected via USB to my MBP and I am booted from another MBP. I want to end up with the newer info from the "broken" drive updating my older Time Machine backup.
Thank You,
SG

Hi
Time Machine will only be able to backup whilst booted into OSX, so unless you can mount the drive, and boot up the OS that is installed on the disk, then no, you will not be able to run a Time Machine backup of that drive.
You could image the drive onto another using Disk Utility
Cheers

Imac won't restore from time machine backup after HD (hard drive) recall replacement

I have an imac bought in 2011, running Snow Leopard. It required an HD replacement due to the 1 TB Seagate recall - the replacement was done by a certified Apple repair station yesterday. Before the guy left he started a backup/restore from my latest time machine backup set. It failed. I attempted it two times and got error messages that it failed and the computer needed to be restarted to try it again. No luck. I called the guy back and he told me to call Apple Care. Not thrilled about that response since the guy had just left my house I did what he told me to do. (A quick sideline here: I recognize that a time machine backup should be no big deal and SHOULD work everytime, but it doesn't. It irks me that Apple is replacing my HD through no fault of mine and yet they don't allow the restore of data to be a "covered" expense in this process - this isn't just because this was an authorized repair guy - the Apple store would have done the same).
Back to the issue. When I called apple care they pretty much had me try the same thing again with an earlier back up set. To my knowledge, it didn't work. I say this because it looked like it was working and when I came back to the imac later, it had restarted and once again booted to the OSX install. (The boot disc is still in the imac). When I tried to boot from another location, one did not show up to boot from so I assumed that the data didn't transfer and it forced another restart. So, I tried something else. I tried to re-install the snow leopard OSX without using the restore function. That appeared to work and then when the machine restarted it asked if I had another mac and I chose the option to get the files/apps/etc. from my time machine backup. The computer chose what I can only assume is the most recent backup set (It chose what I know to be a subfolder that appears under the dated backup folder - Macintosh HD--which btw is confusing seeing as that's always the name of the HD on the imac). I again stepped away from the computer so it could do its thing for two hours. When I returned, I was back to the MAC OSX screen that asks you to choose a language. There were no more options to choose DISK UTILITY or RESTORE FROM BACKUP, etc. When I clicked on English it took me right back into the screen where you say whether you have another Apple that you want to transfer data from. I realized that the imac must have restarted and I assumed maybe it was because the boot disk was still in - except how do you get the disc to eject? I also initially assumed that the backup had somehow failed again and triggered a restart. I tried to choose the option to just set up the machine without transferring data and when I got to the choose a name for your HOME folder message I tried to enter the same name I had it as before and it wouldn't allow me to do so, saying that that name was already in use. I also tried a different name and that didn't work either - got the same message (I assume if it is not the same name that it won't sync up with the time machine data from the backup set). So, I almost tried the "select time machine backup" option again until I looked at my HD space. Clearly, there is space that has been used. HD space was 997 at the start and now it's 636. My initial thought is to somehow get back into the setup area where I can use disc utility and erase the whole thing and then start over but 1) I don't think it's going to work even if I could get back there 2) I have no idea how to get this thing to reboot into that mode 3) I can't get the boot CD out to even try to restart to see if this thing did what it was supposed to, SO NOW I AM TOTALLY STUCK! I have not called Apple Care back because quite frankly they were useless the first time. I have a call into the repair guy but who knows how much help he will be. In the mean time, I have a million things to do and a computer that isn't working - Whoever said Apples never have issues needs to be seriously censored!
A few other notes: I use Time Machine Editor to run my backups weekly. It was set up that way from the get go by an Apple rep who came to my house to get us up and running. Editor should not effect the way that time machine does its work, so I doubt there is relevance but thought it worth mentioning.
One other note is that the Apple Care agent tried to have me do something called a "Source" something or other from the disk utility screen but when she realized that my backup file (shown by date) contained many other sub files (11-27-12/MacintoshHD/MyNamesIMAC/etc.), it was not possible to run this operation - thus we aborted. Sorry I don't remember the name of the process and unfortunately now can't access that option to go find it.
If you can help me, I would be eternally grateful! I am open to having a phone conversation if you are willing to give me your email to mail you my number. I have so much work to do this week and this was the last thing I needed. Did I mention this was supposed to be EASY?
I used to be quite the geek with my PC - still on the learning curve with the mac but not enjoying it. I am fairly tech savvy and I can follow instructions for a step by step solution if you've got one.

I got a recall and had the drive replaced. I have retored 3 timesa dn even had apple do the job and it is still not right. I still can't get a simple ghost of the data from time machineback tot he new drive.
This is Apple's explaination as taken from their web page.:
Restoring your entire system from a backup
If you are restoring a backup made by a Mac to the same Mac
With your backup drive connected, start up your Mac from the Recovery system (Command-R at startup) or Mac OS X v10.6 installation disc. Then use the "Restore From Time Machine Backup" utility.
Note: If "You can't restore this backup because it was created by a different model of Mac" appears when restoring a backup that was made on a different Mac, follow the onscreen instructions.
I even posted this information on the community and apple removed it... because they don't like the:
Off-topic or non-technical posts
Non-constructive rants or complaints
But here is my experieince:
Take in 27iMac running 10.6.8, 5-7 days, what a joke, my boss will be happy to pay for a week without working. Finally get, "if you have TM back up, 3 days." Get machine back with 10.6.3, hit the R recovery, click TM back up, runs for 2 hours, reboots, looks great. Box up take back to office... update to install - OH NO, still running 10.6.3. Updates crash with no specific error on install, BUG PROBELM, nothing runs.
Call Apple... after hours, tells me to boot using 10.6.2 disk, wipe, reinstall OS, udate to 10.6.8, THEN do the restore. GREAT! Only thing 10.6.2 DVD won't read... now back on phone... take back to the store, Genius says, he'll ix it just like it was. PROMISES it'll be fixed.
Pick up next day, supposedly, booted to disk, wiped drive, reinstalled, updated to 10.6.8 and THEN did the RIGHT restore... Looks GREAT... apps run and 10.6.8 OS. Back to the office... NOT RUNNING right!!!... fonts messed up, drop box app needs new install, cocktail needs upgrade, Fetch not working, memorized paths gone... back ups locked out of permissions... ***!!
4 hours on phone with apple and still no rsolution - to missing "settings". Seems there are THREE WAYS TO RESTORE (according to apply tech)... Running MIGRATE ASSISTANT and being able to choose your files, including settings, "R" RESTORE after they load a new OS... or NOW WAITING for them to send me a bootable 10.6.3 disk and then boot from disk, w/o installing OS and doing a restore from TM. I think this is done via the disk Utilties application.
So now can't back up without doing a full 400 GB back up since permissons are screwed and possibly destroying any good back ups... can't work, like having hands tied behind back. WAITING for solution! Very upset!!!
I did my first restore just like they said and now an 10 days without proper machine. Just FYI. I thnk I am going to make the store do the tech work so I have somthing to fall back on.

Resore From Time Machine Backup after Reinstall OS X (Maverick)

Hi all
I have a MacBook pro mid 2010, after reinstalled OS X(maverick) from command + R (disk utility), I try to Restore from TIme Machine Backup, and then after 2 hours, the computer turn off and now I try to turning it on, but only last 5 seconds on and then turn off by it self.
Then I try to Reintall OS X(Maverick) again, and it work fine, I can turn the mac on, navigate to all windows, use the internet, I can turn it off and then turn it on, not problem. Then I need to restore from time machine again so I can get all my data from my last backup. I turned off the mac, then turn it on hold command+R then go to Disk utility Restore From TIme Machine Backup, wait for 2 hours, and again the computer turn off. I try to turn it on but only last 5 second on and then turn it off by it self.
I need help please.
thanks

Do you know which OS version it had originally and which version was on it before the seller wiped it?
That's important because, unless he did the right thing, his Apple ID and password may still be associated with it. You can easily fix that by booting into Internet Recovery (hold down Command + Option + R keys), choose to erase the drive using Disk Utility, and then reinstall the OS. That should resinstall the original OS version (if Lion or later) and then you can upgrade using your own Apple ID.
I'd recommend doing it that way to avoid any possible problems since we don't know what the seller did or didn't do.

Error-1 time machine backups after lion upgrade

I upgraded to Lion on both my computers. My iMac Time Machine Backups are fine - it's connected by firewire to an external hard drive.
BUT my Macbook Tim Machine Backups are wireless using our Time Capsule and the backups are stored on the Time Capsule.
Since upgrading, The backups fail & I get this error: The backup disk image “/Volumes/Brunnertime/LittleOne (2).sparsebundle” could not be accessed (error -1).
Just like so many other unhappy Lion users.
One positive abberation - Last night, I went into Time Machine Preferences, re-selected the appropriate backup disk (our Time Capsule), entered the password, started a backup and VOILA it backed up fine. All night long, it did hourly backups.
This morning? Once again, the backups are FAILING with that same error - The backup disk image “/Volumes/Brunnertime/LittleOne (2).sparsebundle” could not be accessed (error -1).
Plus, now there are NO backups on the disk. Huh?
At this point we are disgusted that both Lion and iCloud (that's another longer story) were released before they should have been. Too many bugs.

Hey, finally I found a permanent fix for this issue. I read about it at another Apple Discussions Forum, but right now I don't remember where.
It worked for me at least. In my case it seems that some Western Digital (WD) software was causing the issue. I just uninstalled WDSmartWare from my iMac using that application's own uninstaller, rebooted my Mac and, finally, after months of calling Apple Support with no luck, it all started to work normally again, so check if you have some WD software running on your Mac. In my case I didn't even need that WD software, as I had it because I used to back up to a WD Drive which I don't use anymore since I bought my Time Capsule.
Feel free to reply if you require any further assistance.
Good Luck.

Restore files from last Time Machine backup after HD erase and install

I just had to do an "erase and install" ... trying to restore files from my last Time Machine backup but after completing the Airport Utility setup / configure steps, it says "waiting to restart" for a few minutes and then says it cannot find TIme Capsule after restart (though TC never restarted). I'm pretty desperate to get my files back as it's Sunday night and my business needs to be up and running by morning. Any help would be greatly appreciated ... even if it's saying I need to take TC into a Mac store to have them retrieve my files.

While in Time Machine, press the key combination shift-command-C. The front window will show all mounted volumes. All snapshots should now be accessible. Select the one you want and navigate to the files you want to restore.

Time Machine backup after upgrading from 10.6

Similar Messages

Maybe you are looking for