Time Machine Backup and Restore
I went to the Time Machine preference dialog box and it opened up to a line up of files. I then clicked on the Folder for "Todaty at..." then clicked on "restore" but nothing is happening.
Is something suppose to show up on the screen?
The only thing showing is the line up of past folderrs and stars and the universe creeping by.
I keep on clicking on the restore button but nothing is happening.
The only way out is to click on the cancel button but then everything stops...
You keep saying you "can't install" or "can't restore," but it's still not clear what, exactly, you're doing and where, exactly, it goes wrong.
If you want to do a full restore from your Time Machine backups, see #14 in Time Machine - Frequently Asked Questions. That has very detailed instructions, complete with screen shots. Please follow it carefully, and tell us exactly which step you're on (a, b, c, etc.) and what message you get or what you don't see that you should. You can't print those screens, so make notes if you have to so we can tell what's what.
If you want to install OSX, follow the instructions in the Reinstalling OSX section of the pink box in Installing the ''combo'' update and/or Reinstalling OSX. Again, tell us exactly what message you get, or what you don't see that you should, at which step, because you can't print those screens, either.
Similar Messages
-
HT201250 Does Time Machine backup and restore Bootcamp?
I am replacing defective hard drive in an iMac that I primarily use as a pc under Bootcamp. I have to find some way to clone and restore the bootcamp partition. I was told today by a Genius at the Apple store that I should buy a 2 TB external (which I did for $150) and run Time Machine. He assured me that my bootcamp partition would be backed up along with the entire mac partition and that I would be able to restore everything perfectly on the new hd. Now that I am home and continuing my research, I can't find anywhere that says it will work. Documentation on Time Machine fails to mention bootcamp. So, does Time Machine backup and restore bootcamp or not? And will it be bootable after the restore? Help!
I think you've got it! I have never used WinClone so I cannot attest to how well it will work, but it's pretty much all lthere is. You will have to create a new Boot Camp partition on the new drive, and it should be the same size as the partition you cloned.
Be sure you prep the new hard drive:
Drive Preparation
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. Quit DU upon completion and return to the installer. Now install Snow Leopard or restore from your Time Machine backup. -
Time machine backup and restore question
Can time machine (which is on a case-sensitive formatted hard drive) which backs up a case sensitive partition, restore to a case insensitive partition?
See Pondini's TM FAQs, for starters.
-
Had a recent crash on my macbook, was previously using OS 10.6 I think. Restored from recent Time Machine backup and updated to OS 10.8.2 and now I cannot open Logic Pro 9. I get a 'No entry' Icon and a not supported on this type of Mac message. I cannot update either as anything up to 9.1.1 tells me I don't need it yet 9.1.2 tells me I need an eligable Logic Pro Version was not found in applications.
All of my files are stored in a separate hard drive with only the actual app having been on my Macbook. Should I just reinstall?Hi
To run Mouitain Lion you need to update Logic.
For the updaters to work the Logic application must be:
a) Within the Applications folder, and not in any sub-folder
b) Named "Logic Pro" with no extra numbers or spaces
CCT -
How to restore a Time machine backup and get a recovery partition?
Hi,
I'm quite confused!
I restored from a Time Machine backup and then setup boot camp (and removed that partition a while back) and now I don't have a recovery partition. (Can't enable File Vault and
bash-3.2# diskutil list /Volumes/Macintosh\ HD
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *120.0 GB disk0
1: EFI 209.7 MB disk0s1
2: Apple_HFS Macintosh HD 87.4 GB disk0s2
My new MacBook Pro didn't come with any CDs.
Apparently I need the recovery partition to reinstall Lion from the internet.
"Recovery HD offers on-disk recovery tools, allows you to restore from Time Machine backups, reinstall OS X Lion over the Internet..."
The recommended solution from Apple seems to be reinstall with your OSX 10.6 CD (which I don't have) and then upgrade to Lion (which seems like a PITA).
Info from : http://support.apple.com/kb/HT4649
What process should I follow to restore my recovery partition and apply the current state of the machine from a backup?
(the process should not involve anything I don't have, like USB memory sticks, Lion CDs, etc....)
Supplementary questions which are only relevant if the answer is "you can't" (which would seem to be a major bug!) :
Or is there a clever method to install a recovery partition onto an existing disk (which clearly has space for it)? I have searched for it but all the results I found have either not mentioned that it works without reinstalling but look like it's needed, or do say "reinstall".
If I install Lion to an external disk, can I boot from that and use the recovery disk assistant tool to restore the partition to my internal disk? (Which I assume I'll need to do to get FileVault to work) ?
Thanks,
MaxMaxs-MacBook-Pro:Applications max$ diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *120.0 GB disk0
1: EFI 209.7 MB disk0s1
2: Apple_HFS Macintosh HD 87.4 GB disk0s2
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: Apple_partition_scheme *136.2 MB disk2
1: Apple_partition_map 30.7 KB disk2s1
2: Apple_Driver_ATAPI 2.0 KB disk2s2
3: Apple_HFS Recovery Disk Assistant 136.2 MB disk2s3 -
My Final Cut Projects folder were missing some files, I went to my time machine backup to restore and it said I don't have permission to access the time machine folder "Final Cut Projects". Why?
Yes, I've done all "the ususal suspects.." repaired permissions, zapped pram, "reintroduced Time Machine to the backup drive by turning it off and on... etc
-
I restored a Macbook Pro from a Time Machine backup and now none of my passwords are working (and I know they are the correct passwords). What can I do?
First, make sure caps lock is not on.
Another reason why the password might not be recognized is that the keyboard layout (input source) has been switched without your realizing it. You can select one of the available layouts by choosing from the flag menu in the upper right corner, if it's showing, or cycle through them by pressing the key combination command-space or command-option-space. See also this support article.
If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password. In OS X 10.10 and later, this option also works with FileVault, but only if you enabled it when you activated FileVault. It's not retroactive. Otherwise, see below.
Note: If you've activated FileVault, this procedure doesn't apply. Follow instead these instructions.
Start up in Recovery mode. When the OS X Utilities window appears, select
Utilities ▹ Terminal
from the menu bar at the top of the screen—not from any of the items in the OS X Utilities window.
In the window that opens, type this:
resetp
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens. Close the Terminal window to get it out of the way.
Select the startup volume ("Macintosh HD," unless you gave it a different name) if not already selected. You won't be able to do this if FileVault is active.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
▹ Restart
from the menu bar.
You should now be able to log in with the new password, but the Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as the login password), there's no way to recover it. -
How do I use time machine backup to restore onto a different computer
I am trying to troubleshoot the best way to back up my Mac. I have been a mac user since 20009 and always used a time machine. The two times I have needed it for backup, my computer did not read the portion the backup was. You could tell under disk utility the space was used. Just before the need of backup, it was backing up. So, I am wondering if I need to use a different method. I lost all of my Christmas 2015 movies. My computer did some weird thing with passwords and it needs some resetting I had to do with the support team on the phone. The support person could not figure out how to access the back up on time capsule. I noticed the password resetting made my computer name different by putting a 3 behind the name I assigned it.
One thought that has crossed my mind is can you use the time machine backup and open it up on a completely different computer? If so, I should have been able to someone access my information. I would like to know the answer and how do it so I know in case this ever happens again and so that I can rely on this expensive back up machine I have purchased two different times on two different computers and never been able to actually use.Are you running Yosemite.. because it is the cause of loads of problems.
As to opening the TM backup from another computer.. yes you can.
Please read our TM expert Pondini.
Q14-17 on restore here.
http://pondini.org/TM/FAQ.html
Particularly as you will see Q17 and it will reference the prior info you need.
I have gone through this with several people.. and I have a post showing a manual file location and restore.
Can't access old files on time capsule
But not from Yosemite.. it has its own bunch of bugs.. as mentioned. Good luck with those.
I also strongly recommend people use a secondary backup method.. there are excellent third party.. I use Carbon Copy Cloner.. it is reasonable price.. $40 based on standard rsync.. and will create either bootable clones to a local drive or sparsebundle on a time capsule etc.
The bootable clone is the ideal way to recover files. since it is based on a simple computer reboot and then access of files that are in exactly the same place as you left them.. TM backs up in a most complicated manner.
See how tm works here. The top couple of articles and how it is different to clones. As Pondini suggests.. using both is no bad thing.
http://pondini.org/TM/Home.html
This is also useful for yosemite.. it is not working as TM used to.
Find files in Yosemite.
https://discussions.apple.com/thread/6681850?searchText=time%20machine%20yosemit e#27139370
While in Time Machine, press the key combination shift-command-C. The front window will show all mounted volumes. All snapshots should now be accessible. Select the one you want and navigate to the files you want to restore.
I am not sure why your previous use of TM failed.. In the midst of all its problems it does still work ok.. as mostly people can recover stuff they do.. albeit it needs a lot more messing than is typical Apple. -
Time Machine backup and main drive corrupted. Help! (REWARD OFFERED)
Here's the deal:
I have a Macbook Pro and a Mac Mini both runnign Snow Leopard. I use the Mac Mini as a kind of media center / server, it has a few external drives connected to it. On of these drives (1GB) is dedicated to Time Machine, the Mac Mini (80 GB hard drive) backs up to it directly and the Macbook Pro (500 GB hard drive) does it over the network (Time Machine created a sparsebundle). This has worked well for years now. Occasionally I got the error that Time Machine needed to start a new backup because the old one was corrupt. That happened about 2-3 times a year (did the same thing when I backued up via USB). Now about 2 weeks ago, that error came up and I just let the Macbook Pro on overnight and connected the ethernet cable for faster transfer.
When I woke up, the Macbook Pro didn't respont at all, spinning beachball, no response at all beside mouse movement. I let it do it's thing for another 10 hours (while I was at work) and just held down the power button to power off and restart it. But all I got was the gray-on-gray flashing folder with the question mark in it, that's what you get when the Mac can't find bootable partitions. So I popped in the OSX Snow Leopard install disk, ran disk utility. It saw the hard drive, but no partition (i.e. Machintosh HD) on it. I checked the Time Machine backup and the sparsebundle was 300 GB (the Macbook Pro had 400 GB used, the remaining 100 GB were free). There is no way to restore from an unfinished Time Machine backup...
First thing I did was clone the internal (Macbook Pro) hard drive to a DMG disk image using DiskDrill (the only program I found that could recognize the drive at all, not even DiskWarrior could). I also bought the exact same hard drive model and partitioned it like the cloned the corrupted hard drive to the new one using ddrescue (a command line tool that doesn't quit upon i/o errors but proceeds and tries to recover as much as it can). It copied everything except 65 kilobytes, the corrupted drive seemed to be physically damaged in a bunch of sectors relatively at the beginning of the disk. Since I had now an exact copy on a fresh, healthy drive, I went crazy trying out Disk Warrior (didn't recognize the drive at all), data rescue, testdisc, p a Windows isk, etc. Only R-Studio (on windows) showed the EFI and Macintosh HD partitions on there, they started and ended on the same sectors on the corrupted drive and its clone. After some research, I figured that the partition table was corrupt so I reformated the clone disk using the OSX Snow Leopard install disk (1 HFS Journaled Partition with GUID Partition table). R-Studio showed the EFI and Macintosh HD on that reformated drive, again, same sectors as before. So I figured I could just copy just the bytes where the Macintosh HD starts from the corrupted drive to the clone (using ddrescue). That worked, after almost 24 hours, I had the clone drive with a "disk1" partition on it that even disk utility could see.
Now I was able to run Disk Warrior on it, but all it could do was recover a few Application folders (Resource-Folders and lproj-stuff), about 100 MB in total. It couldn't repair more of catalog file apparently. Luckily, Time Machine backed up quite a bit (300 GB out of 400 GB of data) and I was able to manually copy all the Dokuments, Desktop, user Library, Applications, Music, Download and Movies. Unfortunatley, only a little bit of the Pictures folder was copied. iPhoto library (80 to 100 GB) was nowhere to be found, backup must have failed right then. I can salvage the drives (time machine drive, original hard drive with a few broken sectors, DMG-image of that drive, 1-1 copy of that drive with partition table repaired) but that only gives me files with numeric names and today's date on teh JPEGs (instead of the date the picture was taken).
Is there any way I can recover that iPhoto library? It appears the catalog file got corrupted because the hard drive (only 8 months old...) failed on a few sectors. If I understand it correctly, the catalog file on HFS+ file systems is where the folder structure and file names are stored in a B-Tree. I can't imagine that some i/o error during backup can totally annihilate that file when it was working perfectly before. Here's a few things I want to try out but haven't figured out how so far:
- Time Machine had to start a new backup. There's plenty of free space on that drive so there's a good chance there's old data left on it. Is there a way to restore files (including file names) and fodlers from deleted time machine backups?
- Is there any way to re-build that catalog file from what is there left on the original hard drive? I can't imagine 65 kilobytes destroys it all.
- Are there other ways to recover my iPhoto Library? The raw JPEG (and AVI) files with correct file names or metadata would suffice.
Thanks in advance for any help, I'll actually reward the person with a working solution, 5 years of photo memories are somewhat important. It really ***** that a failure during a backup destroys that...Final Update:
The catalog file on the original hard drive could not be fixed. Seems like Mac OSX tried to repair the catalog file while the sectors this file resides on failed. To make things worse the partition table was also broken beyond repair, even overwriting the sectors with a new correct partition table didn't help. DiskWarrior found less then 100 MB worth of stuff, mainly Applications folders.
I recovered pretty much everything from the incomplete Time Machine backup by right-clicking the sparsebundle and browsing through the folders with the long alphanumeric names, looking for the version of the folder with the most files in there. All I was missing was part of the ~/Pictures folder, i.e. photobooth pictures and the whole iPhoto Library. My best option was to recover these files using data recovery tools.
DiskDrill proved to be the absolute best, fast, responsive, efficient, and the only one able to mount the DMG-file with no valid file system on it. As there were many i/o errors and broken sectors on the original hard drive, I made a copy of it using a free command line tool called ddrescue (the standard dd tool just aborted when it encountered the i/o error). ddrescue copied the whole drive to a DMG image, I had 56 kilobytes with errors on the first pass, but it managed to shrink that down to just 4 kilobytes (wow!) after the second pass where it tries to re-read the broken secors. It took about 24 hours for a 512 GB 2.5" drive (5400 rpm) but well worth it. Be advised that ddrescue is really persistent and tries everything to recover those last errorneous bytes. At the very end of the process, the read/write head of the hard drive just goes wild trying to catch the data on the sectors with different momentum. This works but I assume this is pretty damaging for the original drive. I also copied it all to a new hard drive (again using ddrescue) and tried partition and catalog repair tools on that (DiskWarrion, testdiks, pdisk, etc.). Still no hint of a good result.
I made a deep scan on the clone hard drive with DiskDrill. At the end (after about 8 hours over USB) it found 13 partition (I assume that's the Macintosh HD, EFI and some DMG files lying around) and hundreds of thousands of pictures. I restored some JPG files just to check the quality, some were damaged, some were good with all the EXIF data intact. I just made it copy all JPG files into a folder. I know the pictures taken from my camera produce JPGs larger than 1 MB and smaller than 5 MB, so I sorted them by size and moved the smaller and larger files into seperate folders. I took the remaining folder (100 GB) and just dragged it into iPhoto. It imported them overnight. Auto-Split by events and I got my library back, alas with different file names, originals and edited versions side by side, lots of duplicates, some damaged, some not. But hey, all the pictures in chronological order. Okay there was also one large event with all the JPGs without valid EXIF data landed inside, iPhoto just takes the file creation date (i.e. the date where the recovered file was copied). As far as I can tell, these are all just data corpses, halfway overwritten copies, random pictures from the internet, desktop pictures, etc.
I started to work my way back through the events, deleting the duplicates and renaming the events. There's an app called "Duplicate Annihilator" which apparently can find duplicate pictures in iPhoto and mark them for you. The free version only does 500 pictures but if it works, I'll get the full version. It can mark th eduplicate photos by adding something to the picture comment in iPhoto so you can manually review it all. Good stuff! -
I recently tried to look up my pictures on my time machine back up on an external hard drive. As soon as I try to open it I get the following message.
"The iPhoto library is a Time Machine backup, and so cannot be used as the main library. Reopen iPhoto with the Option key held down to choose another library."
I have tried holding down the option key but still couldn't few the photos.
I want to know if there is anyway I can actually view these photos. I have over 85gbs of photos on the hard drive. I have tried googling and looking at pervious forums with the same problem but nothing is working.
Please help!Select Mac Help from the Finder's Help menu. Search for "Restore items backed up with Time Machine."
-
Use TC 2TB for Time Machine Backup and Storage simultaneously?
Hi
I am planning to buy a TC 2TB.
I would like to know if the TC can be used as a Time Machine backup device and for storage simultaneously?
for example:
Can I use 1TB for Time Machine backups and 1TB for storage.
Please let me know if this is possible?
Thank youI tried for ages to seek a relatively easy way to do this.. i.e. partition it, it's a huge pain! You can, but i'm pretty savvy and got bored and confused! What I did do was switch the TM back-ups to manual so they don't end up filling the disk. Trust me it's the easiest and best option!
-
Time capsule as time machine backup and NAS?
I've read the TC section of the website and notice a blurb about computers able to connect to it as a HDD.
I realize the device has yet to be released but was wondering about this. I have a handfull of macs and a handfull of xp machines on my network (wired and wireless)
1 of my XP machine is just used as a file server. (1.5TB NTFS formated holding all video/audio/docs as well as having iTunes running to download HD podcast) All computers (Mac/XP) can access this. Five of my XP computers are MCE2005 which are configured to record SD and HD shows directly to this box.
I have yet to have a HFS formated drive to actually do time machine backups and I would like to start. I understand that going with TC I will loose some abilities I currently have by running a dedicated computer/file server but I like the fact that it is small and self contained.
I just want to make sure I understand the specifiations correctly. Can I make a various folders on TC and then map it to my Mac/XP machines via windows naming convention (ie \\TimeMachine\RecordedTV\)
I am in the process of upgrading my file server so this would be a perfect time to think about going this route. Should TC not meet my needs I will continue with my build of a Raid 5 server.Until we get more information, at the present time the only certain thing we know about Time Capsule is that it will support TimeMachine backups.
What we don't know:
1. whether TimeMachine backups to network drives other than Time Capsule will ever be supported
2. whether the Time Capsule internal drive can be used for general file storage, or only Time Machine backups. Current information on Apple's web site could be interpreted either way. I suspect it can be used for general file storage - but that is just my opinion.
If it is not essential that you make a purchasing decision before Time Capsule ships within the next month (and more detailed information becomes available) I suggest you wait. My two cents worth of opinion - if it is general file storage that you want, and Time Machine automated backups are not a priority on the "wish list", then I think you would be far better off setting up your own network file server rather than using Time Capsule for this purpose. -
Is it possible to use an external hard drive for time machine backup and also as a regular hard drive?
I am using an external drive in the exact way that you described. You just keep it plugged in to the computer when you want to access the movies and files. In order to put files on it, just go to finder open up the drive under devices and drag and drop files onto the drive. It is just like using a usb drive with a terabyte of space.
-
I cannot load Maverick on my iMac HD. It reports that my HD is used for Time Machine backups and will not load to that drive. I do not use this drive for backups. I use an external 1 TB WD My Book for backups as well as Super Duper Backups. Can anyone offer advice. Thanks.
Welcome to Apple Support Communities
You have got the "Backups.backupdb" folder in the root level of your hard drive. This is the folder used by Time Machine to save backups to, and the OS X Mavericks installer thought that your hard drive is being used to store Time Machine backups
To fix this, open a Finder window, select the Go menu (on the menu bar) > Go to Folder, and type:
Then, delete "Backups.backupdb" and empty the Trash. Finally, open the Mavericks installer from the Applications folder and follow the steps -
56 day Time Machine backups. and 27" iMac problems.
56 day Time Machine backups. and 27” iMac problems.
I have a problem and its driving me to mad. I wish to backup my iMac to a separate hard drive, When I start TimeMachine backup there is a window that appears ,I switch on Time Machine , select my Verbatim separate hard drive which I have partitioned into three section , one called time machine backups, and click ‘backup now’ the process starts by stating ‘436GB of 500GB available’, Preparing Backup’ and this stays there for ages and then when it does start to backup states backing up 234 byts of 28.3 GB . I left my IMac on for fifteen hours and it still read the same , 234 byts of 28.3 GB also at one time showed ‘time remaining’ as 56 Days. It will not allow me to reformat the Verbatim and will not allow me to eject the backup hard drive. On disc repair it says things are OK, disk partitions are OK. Could I have damaged the Verbatim Hard drive when I previously forced a shut down as it was taking so long and would not eject theVerbatim hard drive. Also Just recently it has been impossible to shut down the iMac as ‘Messages’ is working and won't even force quit. I switch of at the mains. Please help.
Equipment.
iMac 27” 3.2 GHz intel core i5 [four months old]
Running OS X Yosemite
Verbatim [SamsungHD] [three years old]
Partitioned in Three , Formatted as Mac OS Extended [Journaled]
connected by USB 2 Cable
Thanks.First you should NEVER EVER partition a Time Machine or any other backup drive for anythings else but backup. This is likely why you are having issues, buy yourself a high quality EHD such as an OWC (www.macsales.com) Mercury Elite Pro, format it correctly and make that your Time Machine backup HD.
Maybe you are looking for
-
How to build Hierarchy and get values from DAX Evaluation Query?
i have create Calander Hierachy for Year,Quarter,Month... in this invisible tabuler model medata properties. any one give steps for create Hierachy and Get Data From DAX evaluation context ?. VenkadesanPerumal
-
Sampel XPRESS code to call Lockinfo
Does anyone have a piece of sample XPRESS code to check for locks and the user locking the object on a user or configuration object? I've tried this several ways and am just doing something wrong. Any help would be appreciated. Thanks.
-
Hello, I have a number of Solaris 8 Sun servers that have open ports that I cannot identify. I see some with 1012-1020 (which are reserved ports according to the IANA. Lsof does not identify these. One server has all these on and one server just has
-
Text Determination Procedure - Text Management - SAP Library
To add a comment, please log in or register on the top of this page and choose Reply. Please write your comment in English. You can also go back to the SAP help page.
-
How to Transport Personalized mail?
Hi Gurus How to Transport Personalized mail From Development servers to quality sever and also Production Server Cheers Mahi