Time Machine Backup Corrupted Everytime MacBook is closed.

Everytime my macbook is closed or taken with me to business meetings my time machine backup is corrupted and I have to start all over again with backups. This is obscene. On top of that I just had a hiccup with the Finder freezing and had to restart while time machine was seemingly hanging and, again, I must restart just as if I had never had time machine at all.
I am running TM to a Time Capsule.
This is unacceptable. I should be able to close my mac without fear of that corrupting the backup. I should also not have to wait for a backup to complete in order to be able to take my mac with me on business without fear of all backups vaporizing into the plane of non-existence.
Apple needs to institute some sort of checkpoint system where time machine will log its progress after certain points in its backup process. It is a bigger headache to use Time Machine than to manually backup at this point. At least with a manual backup I dont have to worry about data loss as much. Resetting Time Machine has become a daily task.
Anyone else just about fed up because of this blaring issue?

are you putting it to sleep or putting it to sleep by closing it?
Everytime i have closed my macbook while TM was running it has corrupted. we're not talking once or twice. I got the time capsule the day it came out... and have bee having this problem ever since.

Similar Messages

  • My Time machine won't back up.  Recently updated to OS x 10.7.5.  Error message is as follows:  "The backup disk image "/Volumes/Time Machine Backup/Scott's MacBook Pro.sparsebundle" is already in use."  What is wrong and how do I fix it?  Thanks.

    My Time machine won't back up.  Recently updated to OS x 10.7.5.  Error message is as follows:  "The backup disk image “/Volumes/Time Machine Backup/Scott’s MacBook Pro.sparsebundle” is already in use."  What is wrong and how do I fix it?  Thanks.

    Have you tried restarting the computer? Also, see Time Machine Error from this pages sidebar under More Like This.

  • Time Machine backups corrupt or external hard drive failure?

    My goal today was to upgrade my MacBook Pro's HD, and to restore my system from my latest Time Machine backup which resides on an external hard drive. I installed the new hard drive, formatted it as Mac OS Extended (Journaled), and selected Restore System From Backup from Utilities. The system restore was five minutes form finishing when I received an error that the system restore could not be completed, and that I should restart my machine and try again. I did as instructed, but once the system restore process began, the screen went gray, and I was told that the Snow Leopard install could not be completed.
    Before beginning the process a third time, I ran Disk Utility from the Snow Leopard install disc and attempted to verify and repair the external (Time Machine) hard drive. The Time Machine hard drive could not be verified, nor could it be repaired. I popped in the old hard drive into my MacBook Pro, booted Snow Leopard, and ran Disk Utility, and tried again repairing the Time Machine hard drive. Here is the log of the error I received:
    2010-12-29 21:14:30 -0800: Verify and Repair volume “Time Machine”
    2010-12-29 21:14:30 -0800: Starting repair tool:
    2010-12-29 21:14:31 -0800: Checking Journaled HFS Plus volume.
    2010-12-29 21:14:31 -0800: Checking extents overflow file.
    2010-12-29 21:14:31 -0800: Checking catalog file.
    2010-12-29 21:20:22 -0800: Invalid node structure
    2010-12-29 21:20:22 -0800: The volume Time Machine could not be verified completely.
    2010-12-29 21:20:22 -0800: Volume repair complete.
    2010-12-29 21:20:22 -0800: Updating boot support partitions for the volume as required.
    2010-12-29 21:20:22 -0800: Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
    2010-12-29 21:20:22 -0800:
    2010-12-29 21:20:22 -0800: Disk Utility stopped repairing “Time Machine”: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
    Do these errors indicate that my Time Machine backups located in the Backups.backupdb are corrupt, or is the external hard drive corrupt and failing?
    The Time Machine backups are on a Maxtor OneTouch, and from what I've read, they're prone to an early demise. I've also recently noticed that my Time Machine backups started slowing. For example, I would plug in my external hard drive and if 1.3GB needed to be backed up, it would stall at 300 MB before jumping to 700 MB, stall again, then jump to 900 MB. That could be a sign of a failing hard drive, correct? If the external hard drive is failing, I can purchase a new eternal hard drive then copy the Backups.backupdb to the new hard drive, correct?
    However, if Backups.backupdb is corrupt, then from what I understand, I would have to start fresh. I would prefer to not start fresh unless there's no other option, as I would be losing almost three years worth of Time Machine backups.
    Any guidance is appreciated. Thanks!

    ali_baba7 wrote:
    2010-12-29 21:20:22 -0800: Invalid node structure
    2010-12-29 21:20:22 -0800: Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
    It's possible a heavy-duty 3rd-party utility such as +Disk Warrior+ can fix that. It's about $100, and there's no guarantee, but it's probably a good investment for the future.
    Do these errors indicate that my Time Machine backups located in the Backups.backupdb are corrupt, or is the external hard drive corrupt and failing?
    The structure of the file system is damaged.
    That may have been caused by the disk beginning to fail, but there's no way to tell for sure until you erase and reformat the disk and try to use it.
    I've also recently noticed that my Time Machine backups started slowing. For example, I would plug in my external hard drive and if 1.3GB needed to be backed up, it would stall at 300 MB before jumping to 700 MB, stall again, then jump to 900 MB. That could be a sign of a failing hard drive, correct?
    It could, but it could also be whatever's wrong with the file structure.
    If the external hard drive is failing, I can purchase a new eternal hard drive then copy the Backups.backupdb to the new hard drive, correct?
    No. You can't copy corrupted backups. They're all linked together, like a database, so if anything's damaged, the whole set is suspect, and can't be copied.
    There are a couple of options:
    If the disk is physically ok, and the directory damage was recent, you might be able to restore from an earlier backup. But since you noticed problems some time ago, the damage may not be recent.
    Or, you might be able to get up and running by just installing OSX from your SL Install disk (and the 10.6.5 "combo" update). You'll be missing whatever wasn't restored in that last 5 minutes or so. Things are restored in the same order they're listed by the Finder, so it will be the last things in the last user account. You should be able to figure out where it stopped, check or delete the very last file (likely incomplete) and selectively restore as many of the remaining things as you can, via the "Star Wars" display.
    Just to make things more difficult, if the disk is failing, the more you use it, the more likely it is to get worse or fail completely.
    So your safest bet may be to install OSX, then download and install the 10.6.5 "combo" update. Info and download available at: http://support.apple.com/kb/DL1324 Be sure to do a +Repair Permissions+ via Disk Utility (in your Applications/Utilities folder) afterwards. Then recover what you can.

  • Cannot access Time Machine backups on new MacBook Pro

    Hey, I'm new to the forums, just wanting to throw it out there.
    But to the point- Yesterday, I purchased a new MacBook Pro. I upgraded from a regular MacBook. I want to keep my Music, Pictures, and other Documents, so I used Time Machine to make an image of the old machine. I want to copy those specific folders over individually, so I didn't use the option to restore from the Time Machine backup. When I copied my Music folder into the location I wanted it, I tried to open the folder, and received an error message saying:
    "The folder "Music" could not be opened because you do not have sufficient access privileges."
    I went through Get Info and changed Permissions to Read and Write for Everyone. I don't really know what to do from here... It also does this when I try to access the backups on my external hard drive. Please help me!

    Hi, and welcome to the forums.
    You need to Restore the files from the backups, not copy them via the Finder. Time Machine, as you now know, uses special "deny everybody everything" permissions on it's backups to keep us mere mortals from moving, changing, or deleting them, which can hopelessly corrupt them. Restoring one Mac's backups to another one takes a few extra steps.
    TM keeps the backups for each Mac separate, and normally only shows the ones for the Mac it's running on, even if there are other Macs' backups on the same disk/partition.
    Since you're on a different Mac, you need the (badly named) +Browse Other Time Machine Disks+ option to see the old backups. Start with a normal Finder window, then hold down the Option key while selecting the TM icon in your Menubar, or by control-clicking (right-clicking) the TM icon in your Dock.
    You'll see a selection screen showing all the disks/partitions that have TM backups on them. Select the one you want, and you'll be taken to the normal TM "Star Wars" interface, where you should see all the backups on that disk/partition.
    You can then navigate to a backup (presumably the most recent one), in the "cascade" in the center of the display (the first, lowest one, represents "now"). Navigate to the folder you want to restore, select it, click the "gear" icon in the Finder window's toolbar and select the +Restore to ...+ option. Then you'll get a prompt for the destination.

  • Issues with restoring a Time Machine backup onto new Macbook Pro Retina

    I recently got a new Macbook Pro Retina and I've been trying to restore a Time Machine backup made today from my old Macbook Pro laptop. I didn't restore from the first start up (foolishly, seemingly) simply because of the trivial reason of wanting to see the system all clean and new.
    I've tried the Migration Assistant but it gets stuck on "looking for source..", despite having the ex.HD plugged in and double checking the existance of the backup itself on the ex.HD.
    I've also tried booting the laptop up in the 'restore' mode (cmd R) and restoring from there but it sends me in a constant loop of 'this backup was from a previous model of laptop' or something to that affect. It also doesn't display the recent backups at all, only displaying those from the beginning of this year for some reason. All backups are in the same place on the ex.HD so its not an issue with locating the backups.
    Really stuck on this one! Would really appreciate some help!
    Thanks a lot, and merry Christmas

    Yes, you can restore to another machine if needs be.

  • "Reconnecting" Time Machine Backups on New Macbook Pro

    I recently got a new macbook pro and used Time Machine to set it up. Unfortunately, when I attempt to continue to use time machine backups, I get the warning that I don't have enough space.
    I next attempted to use the Pondini B6 troubleshoot to reconnect my backups via the terminal (http://pondini.org/TM/B6.html), however upon attempting to execute the "sudo tmutil inheritbackup" command I received the following error message:
    The backup "I***Mac" can't be inherited because it would conflict with "I***’s MacBook Pro" (with I***Mac being the name of my old laptop and I***'s MacBook Pro being my new one).
    Does anyone have any suggestions? Should I just wipe my backup HD?
    Thanks so much

    It helps!
    After this:
    sudo tmutil delete "/Volumes/Time Machine/Backups.backupdb/Computername 2/"
    sudo tmutil associatedisk -a /Volumes/Mac\ HD /Volumes/Time\ Machine/Backups.backupdb/Computername/Latest/Mac\ HD
    I was able to go into Time Machine and see the backups that were in Computername that I hadn't been able to see via Time Machine (but could see from the command line).
    And then I deleted a folder in TIme Machine (a profile inside ~/Library/Application Support/Firefox and the entire old backup in /Volumes/Time\ Machine/Backups.backupdb/Computername/ was deleted.  Perhaps fat fingers?  I dunno.  I have a volume copy of the Time Machine volume, so I'll try again...

  • Using time machine backup from my Macbook pro to my new IMAC 27

    Hi just tried to do a system restore of my time machine back up from my macbook pro to my new Imac 27, and the imac won't boot. Can I use a time machine back up to restore all of my data to my new Imac 27? Any help would be great thanks.
    Antonio Medina

    It sounds like you've overwritten the new computer's installation of OS X with one that is an earlier and incompatible version. You need to erase the new computer's hard drive then reinstall OS X using the original installation discs that came with the new computer. After you complete the installation you will have the opportunity to use Migration Assistant to migrate your Home folder, third-party applications and support files, and network preferences from an external drive, another connected computer, or an attached Time Machine backup drive.
    1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID, then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. After the above process has completed quit DU and return to the installer. Complete your OS X installation.
    5. When the installation is completed the computer will restart into the Setup Assistant. When you arrive at the point of setting up an initial admin account DO NOT use the same user (short) name that you have been using on your old system. Choose a temporary name to use such as Test or Temp, for example. At the end of the setup you will have an opportunity to migrate data from your TM backup. You can then migrate the Home folder, applications, network preferences, etc. Just do not do a full system restore, again.
    6. When the migration has completed open Accounts preferences. Click on the lock and authenticate. Click on the Account Options button (bottom of the sidebar with account listing.) Change the Automatic Login preferences to use your migrated account. Click on the OK button and restart the computer.
    7. Your computer should restart into your old Home folder with all your data. Open Accounts preferences, click on the lock icon and authenticate, select the temporary account you created then click on the Delete [-] button to remove it. Select the last option (immediate removal) and click on the OK button.

  • Time Machine backup corrupted

    Just replaced the internal hard drive in my iMac because I thought it was failing.
    Reinstalled 10.6, restored the Time Machine backup for the four users on the computer, and the symptoms have returned - spinning wheel at the startup, sometimes not finding the startup folder, sometimes long pauses between data accesses when it does startup, etc. Because there's a new hard drive inside, I'm assuming Time Machine has backed up some corrupted files that are leading to these symptoms.
    My question: Is it possible to delete a couple days' worth of backups in Time Machine inside the "Backups.backupdb" folder (because the iMac was functioning well a couple days before the failure) and THEN restore?
    Ron

    ronlevesque wrote:
    My question: Is it possible to delete a couple days' worth of backups in Time Machine inside the "Backups.backupdb" folder (because the iMac was functioning well a couple days before the failure) and THEN restore?
    If William's suggestion doesn't help, much better would be to do a full system restore from an earlier backup, per #14 in Time Machine - Frequently Asked Questions.

  • 10.5.8 Time Machine backup migrate new MacBook pro...?

    Hi all,
    My venerable PowerBook G4 has died, but I take regular time machine backups.
    If I purchase a new MacBook Pro, will I be able to migrate my data to it, if it's running Lion.
    I undestand some of the old programs won't work - so be it, but I'm more concerned about my photo's.
    Many thanks.

    Yes. 
    Your best bet is to use Setup Assistant when your shiny new Mac first stars up.  See How do I set up a new Mac from an old one, its backups, or a PC?

  • Can i use my time machine backup of my macbook pro for my iMac?

    its a new imac and i'm wondering if i can use time machine to get my imac where my macbook is...like mirror everything thats on my macbook.
    hope that makes sense.
    jon

    Use Migration Assistant on your new iMac and select "Time machine or other backup disk" as the source.
    Migration Assistant is in your Utilities folder.

  • HT201250 Time machine backup to new macbook

    I am purchasing a new macbook.
    If I use time machine and want to incorporate its backup into a new macbook, does it back up my itunes backup information of my iphone as well?

    Welcome to Apple Support Communities
    Time Machine makes a backup of everything on your OS X partition except you want to exclude some data. Also, if you want to restore files, you can choose what you want to restore, so the answer is that your iPhone backups will also be backed up

  • Cannot move iTunes library from Time Machine Backup onto new Macbook

    I'm trying to move my iTunes library off my iMac onto my MacBook.  I thought I could grab it from my Time Capsule but when I open the Time capsule it shows as a sparse bundle which I cannot do anything with.
    Is this the best way to do it?  I would imagine it would take forever over wifi...
    Can I transfer using Migration Assistant and an ethernet cable?  Does migration Assistant ask me to use an ethernet cable as an option?
    Thanks

    I forgot to mention the iMac is running snow leopard and macbook pro is Mountain Lion

  • Time machine backup from damaged MacBook Pro

    I was at a party on Saturday and a friend spilt some lager onto my MacBook Pro I quickly turned it upside down and left it over night I switched it on next day and it worked but now it won't switch on I suspect the main board is damaged. If I take my laptop to Apple would they be able to backup my hard drive to an external hard drive before they carry out any repairs or will I have to get the hard drive backed up before I take it to apple?
    Cheers Niall

    Usually a HDD survives liquid damage.  You can take it out from your MBP and connect it to anther Mac and see if it has survived.  If so copy the data to another external HDD.
    If you bring it to Apple, make certain that the staff knows that the HDD should be copied before any work is done.  If they are not aware of the situation, they could possibly wipe the HDD.
    Ciao.

  • Continue Time Machine backup on MacBook Pro Retina

    Yesterday evening I copied my Time Machine backup from my MacBook Pro to my MacBook Pro Retina. When this was done, the icon of Time Machine was gray. When I tried to make a Time Machine backup, it wasn't possible to continue with the (old) Time Machine backup; instead there was made a new (complete) backup (and I stopped that after a few seconds). I didn't get an opportunity to choose "inherit backup".
    So my question: is it possible to continue a Time Machine backup of a (normal) MacBook Pro on a MacBook Pro Retina? (I don't need to use the backup on the normal MacBook Pro, but I want to be able to search in my old files using Time Machine, not via Finder and searching in the folders of the old Time Machine backup).

    The warranty entitles you to complimentary phone support for the first 90 days of ownership.
    If you bought the product in the U.S. directly from Apple (not from a reseller), you also have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

  • Migrate Time Machine backup (10.6.x) to MacBook Pro (10.8.x)

    On a USB drive, I have a Time Machine backup--from a Macbook running (10.6.x).
    I'd like migrate this account from its TM backup to a Macbook Pro (10.8.x)
    I've plugged in the USB drive to the new machine, it mounts and works perfectly.
    But using Migration Assistant, I select "From a Time Machine backup or Another disk".
    The disk is never found, the "Looking for other Comuters" spinner never stops.
    How the heck do I get this account to the newer machine?
    Thanks!

    On a USB drive, I have a Time Machine backup--from a Macbook running (10.6.x).
    I'd like migrate this account from its TM backup to a Macbook Pro (10.8.x)
    I've plugged in the USB drive to the new machine, it mounts and works perfectly.
    But using Migration Assistant, I select "From a Time Machine backup or Another disk".
    The disk is never found, the "Looking for other Comuters" spinner never stops.
    How the heck do I get this account to the newer machine?
    Thanks!

Maybe you are looking for

  • I can't organize my tabs, when I click and drag on a tab to move it, it just stays in it original place

    I have more than one tab open, and I can usually move them around and organize them freely. But a couple of days ago when I tried to move them they just get stuck and stay in the spot it was put in when i created the new tab. I didn't download or cha

  • Importing multiple column names to Logical Model

    I have approximately 2,000 column names to import into a new logical model and create my glossary. The names are in currently in .xls format. Is there an easy/efficient way to do this or must I enter each into the logical model attributes? Maybe a wa

  • RoboHelp for Word in RoboHelp 9

    I just upgraded from Robohelp X5 to Robohelp 9.  After installing version 9, I am unable to find where the new version of Robohelp for Word is.  All I can find is RoboHelp HTML.  How do you work on existing Winhelp projects with version 9?  We switch

  • Accounting entries for initial stock upload (URGENT HELP NEEDED)

    Dear all, I wanna confirm following are my accounting document entry kindly confirm if it is right. CO.Code Itm PK SG Account Description Amount Curr. 2000 1 91 235199 Balance Upload Account 12.000,00- SAR 2000 2 86 411520 Price Difference Acc. 1 2.0

  • ACL filtering icmp ECHO-Reply Behavior

    Hello Guys....                     I needed some help here.....i have attached the topology with this in case you dont get what iam trying to ask i have just 2 routers connected directly like this......     R1<------------> R2,  The network between t