Time machine backup erased? HELP

After encountering hard drive problems with my mac air and getting new installed, went home to restore computer from time machine backup. Problem is: disk is there, but there are noe files! It´s like it is wiped clean. Was what happened to mac hard drive as well. They were not connected as the macbook problem occured, but can there be a link? Had just backed up hours before. Also stored old photo albums on the back up drive separate from the backup files. These are gone too. Is it likely EVERYTHING is gone??

Triple-click anywhere in the line below to select it:
diskutil list
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste (command-V) into the Terminal window.
Post any lines of output that appear below what you entered — the text, please, not a screenshot.

Similar Messages

  • Clean install of Lion. Now I can;t see the partition on a USB external where I did a Time Machine backup. Help?

    Howdy.
    Ok, wanted to update my daughter's MacBookPro (late 2009 - 2.26ghz - 8GB RAM) I took a new external and partitioned into two GUID partitions. Installed Lion on one, and did a full (and verified) backup on the other. Booted off the external, erased the laptop drive and installed Lion. Works perfectly.
    But when I try and access the Time Machine backup, I can't even see the partition. The icon is on the Desktop, the partition is in Finder. When I first instaled it even asked if I wanted to use that partition for Time Machine. But I can't do anything but a full restore, which I obviously do not want.
    I tried going into Time Machine itself and when asked if I wanted to "Use Previous Disk" to do TM backups, I said yes. But I could not get the Mac to "inherit" the old backup.
    Migration Assistant doesn't see the partition either.
    Help?

    First I formatted 2 partitions GUID on the external and installed Lion into one of them., and backed up the Macbook (via Time Machine) into the other. I then booted off the external Lion partition, erased the Macbook, installed a fresh Lion.
    I then restarted using the new internal Macbook drive. Works perfectly. But now, when I try to use Migration Assistant I cant see the second partition, the one with the Time Machine backup.
    I know I can do it manually but actually the computer is with my daughter at college in Arizona and I'm in Connecticut, so I'd rather get to the screen that allows you to restore users and settings only.
    Thanks!

  • Concerns ALL Time Machine Users. HOW TO MOVE Time Machine backups. Help !

    Concerns ALL Time Machine Users :
    MOVE (or COPY) Time Machine backups from a "x"To Disk to an "y"To greater disk.
    Hello and thank you all for reading me,
    First, excuse me if I make language errors (I'm French).
    Secundo, I don't know if you'll find something interesting for you
    in what I write about Time Machine and my own problems,
    but there's a possibility also that YOU could perhaps help me.
    I'm talking about Time Machine and his **** Backups.backupdb folder,
    containing "*Name of your Mac*" folder,
    this folder containing Time Machine backups, format : YYYY-MM-DD-HHMMSS
    Time Machine doesn't recognize the backups it made *IF YOU MOVE THEM*.
    I have perhaps a solution in this message.
    You'll see below what kind of problem I (and you could) have.
    Since 12/01/10, an Apple Adviser Level Two (and me)
    are trying to understand how to move backups from TM1To Disk to, let's say, a bigger one.
    My case is TM1,5To.
    *Purpose :* Move 19 backups from Time Machine X disk to Time Machine Y disk.
    Delete TMX disk Time Machine backups after that.
    Make TMY disk the current used Time Machine Disk.
    I don't remember exactly what we did before
    (we even created a "root" account with password (dangerous to do),
    but it didn't solve the problem),
    but we finally copied :
    TM1To > Backups.backupdb > *MacBook Pro* folder (containing 19 backups) into :
    TM1,5To > Backups.backupdb folder.
    The Copy application announced *16 hours !* (without antivirus, to remove absolutely).
    So I said goodbye and thank you to my Apple Adviser. After *8 hours*, Copy failed.
    BUT it had succeeded to copy *4 backups ONLY* (why ?) in TM1,5To.
    I immediately verified and checked each of these with Get Info.
    They had EXACTLY the same size (Byte to Byte) as in TM1To.
    ➔ BUT HERE IS MY OBSERVATION :
    After designing TM1,5To as Time Machine Disk, I ordered it to Backup (now).
    And what did Time Machine do in TM1,5To > Backups.backupdb ?
    It created a *NEW folder*, named *MacBook Pro 2* !
    ➔ *I HAVE NO ACCESS* to TM1,5To > Backups.backupdb > *MacBook Pro* (4 backups copied from TM1To, remember) ;
    ➔ while I still *HAVE ACCESS* to TM1To > Backups.backupdb > *MacBook Pro* (19 backups) ;
    ➔ *AND I HAVE ACCESS* to TM1,5To > Backups.backupdb > *MacBook Pro 2*,
    where Time Machine makes actually his backups.
    *NOTE :* If you *change the name* of your computer,
    Time Machine *changes automatically the name* of the folder who is in Backups.backupdb folder.
    ➔ ① I have *never seen* such protections (Sharing and Permissions).
    You are not allowed to do anything. I've tried to change permissions,
    first : "R+W", after that : "Make (Me) the owner", I can tell you : DON'T DO IT !
    ➔ ② It's impossible to install an OS on a Time Machine disk
    (I thought it would allow better permissions).
    OS Installer detects the existence of a Backups.backupdb folder
    and refuses to install on this disk or partition.
    I have now the bad intent to install minimal OS X
    1) after deleting (how ?) this folder (but not its contents, how to move it ?)
    and 2) declare *after that* the disk as Time Machine disk.
    ➔ ③ Time Machine doesn't backup OTHER Time Machine backups
    (who are in an ancient-not-choosed-for-backups Time Machine disk) NOR backups this disk
    (detects, once again, the existence of a Backups.backupdb folder).
    AND you can't *absolutely not remove backups from the folder the're in*
    (for me, *MacBook Pro* or *MacBook Pro 2*).
    ➔ ④ I didn't have time to do it, but I think there would perhaps be a solution
    in restoring backups in partitions specially created to receive them (having the same name,
    that sort of thing) and then re-backup these partitions (vicious and complicated).
    There is a function on Mac OS X Install DVD : start with it, and then (do not install)
    choose "*restore from Time Machine backup*" from the menu bar (it's called "Utilities", I believe).
    ➔ ⑤ I *absolutely don't understand* what follows :
    — If I add (in my TM1To disk) the bytes of the 19 backups
    in Backups.backupdb > *MacBook Pro* folder, I obtain about *1,8 To*.
    — It's impossible (and not french).
    — When I check the size used with Disk Utility (NOT with Get Info),
    I find a correct (?) size : *about 750 Go*.
    — What are Time Machine backups made of ?
    It can't be aliases (because of their size, and because *aliases suppose originals,
    and where could they be ?*), or am I wrong and becoming crazy ?
    ➔ ⑥ If you refer to the numbers shown at the end of this text (*4 backups*),
    you'll see I could *delete duplicate elements* inside these 4 backups,
    to win space (but *what kind* of space *if I delete aliases* ?).
    Back-In-Time (see below) says he does it.
    BUT is it really the OLDEST items I have to destroy (see ⑤),
    when I don't know with what kind of ARTEFACT I'm acting ?
    What does Time Machine delete to create more backup space ?
    Is it REALLY the OLDEST backups it treats, or duplicates, OR ?
    *What you can do :*
    Find and go to Tri-Edre.fr or Tri-Edre.com/fr site (it's a french company
    that creates small Mac applications since fifteen years at least,
    I think I already bought them several programs in 1990) ;
    Their program *Back-In-Time 1.4.4* is free (Trial) and complete to download (with PDF docs too).
    It is *ENTIRELY DEDICATED* to Time Machine and *things you can't do* with.
    Price is about 30 €, I think it's worth.
    The TRIAL version you will obtain can only work on the LAST Time Machine backup,
    but you will see what's featured *AND :*
    You will ACCESS to ANY Time Machine backup you want
    (It has to be the last of a serie of backups, but the serie you want.
    I've bought the application and own an activation key, but you understand I can't give it to you
    (it would not be ethic) and anyway you would be obliged to disconnect AirPort, Ethernet etc.
    •➔ I have bought the application because I thought (it's said in PDF FAQs) I could IN THE END move Time Machine backup files, but it cannot, (I'm afraid).
    *BUT ANY ACCESS PROBLEM IS SOLVED.*
    •➔ Back-In-Time 1.4.4 can *delete :* duplicate backups, complete backups,
    or duplicate items inside one or several Time Machine backups,
    things that I believe impossible with Time Machine itself
    (I've seen it offers to delete ALL occurences of an item) ;
    •➔ The application can also restore anything you want, where you want
    (but I think Time Machine does it too ?)
    •➔ Believe it or not, but since I've bought it on 15/01,
    I've only worked about 2 hours (no, much more) on it
    and didn't make sufficient progresses (enhancements ?)
    to talk of it with sufficient experience (I'm a bad guy, don't you think ?)
    •➔ Tri-Edre offers on-line support, e-mail support (and so on),
    and I EVEN didn't manage to join them, because I did many other things,
    and also somewhat have been disgusted *not to be able to move* or copy
    *(accessible by Time Machine after that)* backups,
    and I also didn't succeed (*another Time Machine inconvenient*) to DESTROY an ".inProgress"
    Time Machine (package) which doesn't work anymore (several interruptions while active),
    date (and name) 2010-01-27-164345.inProgress, but is used (*with failure results*)
    by Time Machine (it's turned off till I find how to destroy its **** ".inProgress" package.
    •➔ I've asked my Apple Adviser Level 2 to wait for news from me
    before working himself on the problem, and I think I will send him this message
    to prove I haven't forgotten him.
    •➔ I'll send it to Tri-Edre too, in the same move.
    I hope those remarks to be useful for somebody, tell me if it has helped.
    I will also publish this in any Time Machine topics I find here, and in MacRumors site too.
    As you can see, I need help too … Does anybody have an idea ?
    Perhaps if I used a specific Copy software, it could work ?
    You'll see below an example of some time I've spent to study my problem
    (you will think I'm crazy).
    With my kind regards, and good luck if you have other Time Machine problems !
    Olivier Herrbach
    <Edited by Host>
    Le but du jeu est de transférer toutes les sauvegardes Time Machine
    d'un volume/partition que nous appelerons "1 To"
    sur un volume/partition que nous appelerons "1,5 To".
    *Je rappelle que les 4 sauvegardes effectuées par Time Machine sur le 1 To
    n'ont pas été reconnues comme siennes par Time Machine sur le 1,5 To,
    bien que strictement identiques en taille après leur copie.
    J'ai remarqué dans Back-In-Time des fichiers invisibles (tels que "TimeMachine.log"
    ou quelque chose de genre), et je soupçonne fort qu'ils n'ont pas été copiés et que Time Machine,
    ne les trouvant pas dans le 1,5 To, a ignoré à cause de leur absence les 4 sauvegardes décrites ici.*
    *Sauvegardes effectuées par Time Machine sur 1 To :*
    Path : MacBook Pro > Volumes > 1 To > Backups.backupdb > MacBook Pro
    MacBook Pro contient 19 items (dont un alias appelé "Latest") :
    1°) 2010-01-02-045758 Size : 913.207 B for 41.888 items comprenant :
    • Hitachi 1 To Size : 907.664 B for 41.887 items 7 folders
    Différence avec 1°) = - 5.543 B - 1 item (1 folder)
    2°) 2010-01-03-001957 Size : 982.211.325 B for 67.490 items comprenant :
    • Hitachi 1 To Size : 901.516 B for 41.886 items 6 folders
    Différence avec 1°) = - 6.148 B - 1 item - 1 folder
    • Samsung 500 Go Size : 981.302.510 B for 25.602 items 4 folders
    Total • + • = Size : 982.204.026 B for 67.488 items
    Différence avec 2°) = -7.209 B - 2 items (2 folders)
    — *Supprimer • Hitachi 1 To* dans 2010-01-03-001957. Comparer les dossiers.
    3°) 2010-01-04-222709 Size : 5.241.032.819 B for 26.509 items comprenant :
    • Samsung 500 Go Size : 5.187.330.874 B for 19.392 items 8 folders
    Différence avec 2°) = + 4.206.028.364 B - 6.210 items + 4 folders
    • StartUp Disk Size : 53.692.703 B for 7.115 items 4 folders
    Total • + • = Size : 5.241.023.577 B for 26.507 items
    Différence avec 3°) = - 9.242 B - 2 items (2 folders)
    — *Supprimer Samsung 500 Go* dans 2010-01-03-001957. Comparer les dossiers.
    4°) 2010-01-05-125449 Size : 9.428.705.396 B for 204.915 items comprenant :
    • HD 250 Go Size : 9.374.308.265 B for 181.575 items 7 folders
    • Samsung 500 Go Size : 692.898 B for 16.222 items 8 folders
    Différence avec 3°) = - 5.186.637.976 B - 3.170 items
    • StartUp Disk Size : 53.692.703 B for 7.115 items 4 folders
    Total • + • + • = Size : 9.428.693.866 B 204.912 items
    Différence avec 4°) = - 11.530 B - 3 items (3 folders)
    — Supprimer • StartUp Disk dans 2010-01-04-222709. IDENTIQUE.

    Dear James Pond,
    Thank you once again, and, don't be afraid, I will be as short as possible,
    but I need to use your last reply (I've cut all what was already said).
    JP ➔ You can copy an entire set of backups, but you cannot copy part of it successfully. See #18 etc.
    JP ➔ Read this from the first paragraph: "you cannot copy only selected backups,
    or merge two (or more) sets of backups." The structure of the backups simply will not allow it.
    I've read it, and found it regrettable. And I've also read, after that, what were the solutions under Leopard and Snow Leopard, and my conclusion is that it's a *dead end* for me. In short,
    — I can't move (by drag and drop) the 1To's Backups.backupdb folder (containing MacBook Pro, 19 backups, access) to 1,5To, because there exists already the Backups.backupdb folder created by copy on 12/01 with Apple Assistance (containing [MacBook Pro, 4 backups of 19, no access] and [MacBook Pro 2, 15 backups, access]). I don't even know if it could be deleted by the copy (and I don't wanna do that anyway) ;
    — I can't rename (and what for, I already forgot it) any Backups.backupdb folder nor delete it ;
    — I can't copy any Computer'sName folder (entire set containing backups), being in a Backups.backup.db folder, into another Backups.backupdb folder ;
    — I can't copy any (or all of an entire set) YYYY-MM-DD-HHMMSS backup(s), being in a Computer'sName folder, into another Computer'sName folder (even if it would be empty).
    — Saying NONE in Time Machine Preferences and putting it to OFF is simply no use.
    All is said. What I can try to do is :
    — Delete (not with Finder, but with Back-In-Time) all duplicate things I find in all backups and also entire duplicate backups (I have full access to all with the software) ;
    — Restore each of the reduced-to-minimum backups obtained in specially right-sized partitions wearing the YYYY-MM-DD-HHMMSS name of each restored backup. Time Machine doesn't backup his backups, but will backup these partitions.
    I'm afraid to be actually completely running out of the target, when I read what I write … It's time to go to bed !
    Reminder (OH) : Where did you find these amazing informations ?
    JP➔ Some of it is detailed here: http://www.appleinsider.com/articles/07/10/12/roadto_maco[]sx_leopard_timemachine.html
    ➤ Thank you ;
    JP➔ and here:
    http://arstechnica.com/apple/reviews/2007/10/mac-os-x-10-5.ars/14
    ➤ Thank you too ;
    JP➔ You have to understand the structure. When TM does the first backup, yes, it copies everything.
    On subsequent backups, it copies what's new or changed, but also makes "hard links" (sort of like aliases) to the copies of the things that didn't change. That's how it can only back up a few things each time, but show you a complete "snapshot" of the way your entire system looked at the time of every backup.
    ➤ I'll do my best to understand.
    JP➔ Time Machine deletes backups under two conditions. See the first part of #12 in the Frequently Asked Questions User Tip, also at the top of this forum.
    Under normal circumstances, you should not have to delete any backups. See the rest of #12.
    ➤ I understood why Time Machine didn't delete oldest backups : they were not weeklies ones.
    Reminder (OH) : How can I destroy the (corrupted ?) not working "2010-01-27-164345.inProgress" in 1,5 To, which causes Time Machine to abort any backup of any size I ask ?
    JP➔ Why do you think it's corrupted? TM is designed to "recover" a partial backup.
    ➤ I'll verify that with the little Tools/Apps I discovered in your FAQ User Tip document and downloaded immediately.
    Why didn't Apple tell me anything ? It's my fault, I'm perhaps not clear and not demanding enough more from them.
    JP➔ You cannot install OSX on a disk containing TM backups. That's because they need to be on separate disks.
    Technically, you could put them on separate partitions of the same disk, but that would not be a good idea.
    ➤ I never told you that (there would be no interest at all). I talked about the same location, to see if it would allow me more permissions, but if all works without doing it, it's really no use.
    JP➔ Sorry, I don't know what that means.
    ➤ I'm sorry, I didn't explain : "but if all works" meant : Copy Backups.backupdb, "without doing it" meant : Install OSX.
    ➤ If I install an OSX BEFORE, Time Machine will REFUSE completely to backup on it, it's understood.
    JP➔ Correct. The partition you're running from will not be an option in TM Preferences > Select Disk. That prevents TM from backing-up it's own backups!
    ➤ Would it be so absurd ? Maybe it could resolve my actual problem ?
    I think you are right, but I don't know why. I trust you.
    Reminder (OH) : "I will not bore you again except if I don't find a specific answer to an unknown-never-seen-incredible malfuction."
    JP➔ Don't worry about that -- thats what this forum is for, especially if you're still having problems.
    ➤ It's seems in fact that there is no possible solution, except what I said above and is certainly crazy/out of subject.
    Just try to be as clear and concise as you can.
    And please don't post the same things repeatedly -- it wastes your time and ours, and can confuse other folks.
    ➤ You're absolutely right and I tried to do so this time, and I'm sorry because I see it's still (far) not enough (short).
    Thank you once more. I wish you a good evening and week-end. Here it's 01:40 AM.
    With my kind regards
    Olivier Herrbach
    [email protected]

  • How to merge two iTunes libraries, one from a Time Machine backup.  Help!

    Hey there,
    Here´s the backstory, my laptop was stolen (along with my older iPod which had ALL of my music on it) in February.  I am from Minnesota, and I now live in New York, but my backup from December was in Minnesota at that time.  On me at the time my laptop got stolen was my 32 gig iPod Touch, which had ~80% of my music on it, but not all of it due to capacity issues.  I bought a new Macbook and loaded all of my music that I HAD onto my new laptop, and of course have downloaded a bunch of stuff since then.  I really like my new Macbook so I want to just pull and merge my old iTunes library onto my new computer, without duplicates and without having to manually go and delete things.   Since my iPod Touch was loaded randomly, I have a lot of albums that have something like 11 out of the 12 songs or whathaveyou.  I tried restoring from my old Time Machine backup, but I have realized that I really liked the cleanness and functionality of my new computer without three years of detrius in it, so I am going to restore from my NEW Time Machine backup, and would like to get my old music back onto my new computer.  If this is confusing at all please let me know and I will try to clarify.  Please help me with this, there has to be a program or something!!!

    You have some choices. Obvioiusly the easiest thing to do will be to restore the entire library from the Time Machine backup. You can also use the new iTunes in the Cloud feature built into the latest iTunes to download any music and TV shows you might have purchased from the iTunes Store.
    So what you could do is first, download your purchases from the iTunes Store, then restore everything else from the TM backup.

  • Problem restoring files from a Time Machine Backup! HELP!

    Heya,
    I have Snow Leopard and have been using Time Macine regularly since May.... I never needed to restore any file until now...
    Deleted some must have stuff.. and emtird the trash (of course!).. so went to time machine to restore it...
    Looked it up... nice interface.. have stuff since May 2011... nice.. found the 10+Gb of stuff I had deleted.. and restored... Pffffew!
    Opend the file... Bzzzz! you loose... file is currupt,,, what?
    load again.. still no go? files all look the right length m.. hmm very strance... can;t open then... lets try a simeple file...
    restore a text file... size ok.. but... EMPTY!
    use HexEdit to open the text file... All ZERO's!
    check the otehr files I restores ALL ZERO's!
    DOH! restore files I saved into safe old Time machine in May 2011... AL ZEROS!!
    ***! Everything is ZERO! my last 6 months worth of time machine backups is all gone! Directory structures say they are there.. file sizes are ok.. but NO DATA!!!
    Can somone please HELP ME!
    G./

    Open Disk Utility. Click once on the external drive left-most icon (not the indented volume name/icon); what does it indicate for Partition Map Scheme? Also, do you have an Intel Mac or a PPC Mac?
    Now click "Verify Disk" and see if it finds errors or if it reports "ok."
    What I am hoping (this is something of a long shot) is that there will be errors found on the disk that Disk Utility can repair and then your data will be properly associated with the file names and headers. "Verify" simply reports back on the state of the file system and can do no harm; only when you click on "Repair" will it actually try to repair anything. You might want to report back first on the results of "Verify" before trying to "repair."
    By the way, this Verify (or Repair) procedure can take ~ hours for a large disk that is mostly full. I did this recently on an external Time Machine drive that was 1.5 TB in size and 2/3 full and it took ~ 3 hours.
    If severe errors are found on that disk, something stronger than Apple's Disk Utility might be called for, such as Disk Warrior. Hence better to report back here before roceeding with any "repairs."
    The type of error I am hoping you might have is in the file system that relates the filenames and their header (and file sizes) to the locations around the disk where the actual data inside the file are located. If that file system gets damaged, your computer will have trouble finding the actual data that goes with each file. Hence getting zeros when you should have gotten data. Sometimes this can be fixed, sometimes it cannot. Often it can. If the problem is caused by a physical problem with the disk, the likelihood of recovery is low. If the problem is with the file system/mapping to the data on the drive, it very well might be fixable.
    Have you had any power failures, system freezes, improper or disorderly computer shutdowns, etc. or unexpected dismounting of the backup drive anytime since you have been using it? Have you ever gone into that external backup drive in the finder and changed any of the files on it yourself, or has it only been touched indirectly through Time Machine?

  • My 2008 MacBook Pro Stop Recognizing my Time Machine Backup Disk "HELP"

    My 2008 MacBook Pro Stop Recognizing my Time Machine Backup Disk & without it my MBP Run's Slow like a "I Hate to say it Windows OS" Is my USB Drives? (2.0) Or is it Time to UPGRAIDE to a Unibody MBP? Please Help ASAP

    Take it to an Apple store or AASP.

  • Time Machine Backup Crash - HELP!!!!   Everything wiped out.

    After reinstalling my time machine back-up, at restart I receive the following error:
    panic(cpu 0 caller 0x5591cb: "Unable to find driver for this platform: \"ACPI\".\n"@/SourceCache/xnu/xnu-1504.7.4/iokit/Kernal/IOPlatformExpert.cpp:13 89
    Dbugger called <panic>
    Backtrace (CPU 0), Freame : Return Address (4 potential args on stack)
    BSD process name corresponding to current thread: Unknown
    Mac OS version:
    Not yet set
    Kernel version:
    Darwin Kernel Version 10.4.0 ....
    Can anyone help??? Obviously, this is reinstalling over the old, so everything is wiped out. The reinstall took 16 hours. I have tried reinstalling several older versions all with the same results. I verified the hard drive and everything is fine. I am at a loss.

    This does not answer the question, and your wording is vague enough that it's hard to be sure exactly what's going on. Did you do exactly what is said here:
    http://web.me.com/pondini/Time_Machine/14.html
    If not, tell us step-by-step what you did, as if you were trying to explain how to duplicate it to someone who knows nothing about computers.

  • Unable to restore from Time Machine after an erase and reinstall - MacbookPro cannot access my old Time Machine backup volume. Desperate for help please?

    My MacbookPro would not move past the Apple logo and spinning wheel for a number of hours.  After trying the numerous suggestions to solve the issue I eventually opted to erase and reinstall feeling confident my Time Machine backups would come to the rescue.  After a successful erase and reinstall I tried to restore all my data from my TIme Capsule using Command-R during start up and by using the Migration Assistant.  Neither worked and I have received messages to the effect that the backup volumes on my Time Capsule cannot be access because I have entered a wrong password or because the backup volume is damaged.
    When I open my Time Capsule in Finder and click on my sparsebundle I get an eror message saying that the disk image could not be opened and that the resource is temporarily unavailable.
    Desperate for some help and comfort that many years of personal data have not been lost.
    Thank you.
    M

    When I try to Verify option it says Unable to Verify - Resource temporarily unavailable.
    Here is the past of the log screen:
    2013-06-09 15:00:00 -0500: Disk Utility started.
    2013-06-09 15:09:01 -0500: Disk Utility started.
    2013-06-09 15:19:53 -0500: [DUDiskController viewablePartitions] expecting DUDisk, but got nil
    2013-06-09 15:19:53 -0500:
    2013-06-09 15:20:00 -0500: [DUDiskController viewablePartitions] expecting DUDisk, but got nil
    2013-06-09 15:20:00 -0500:
    2013-06-09 15:20:05 -0500: [DUDiskController viewablePartitions] expecting DUDisk, but got nil
    2013-06-09 15:20:05 -0500:
    2013-06-09 15:20:13 -0500: Verifying Image “Macajee’s MacBook Pro”
    2013-06-09 15:20:14 -0500: Unable to verify “Macajee’s MacBook Pro.” (Resource temporarily unavailable)
    2013-06-09 15:20:14 -0500:
    2013-06-09 15:25:21 -0500: Verifying Image “Macajee’s MacBook Pro”
    2013-06-09 15:25:23 -0500: Unable to verify “Macajee’s MacBook Pro.” (Resource temporarily unavailable)
    2013-06-09 15:25:23 -0500:
    2013-06-09 15:25:27 -0500: Attach Image “Macajee’s MacBook Pro”
    2013-06-09 15:25:27 -0500: Initializing…
    2013-06-09 15:25:31 -0500: Attaching…
    2013-06-09 15:25:31 -0500: Finishing…
    2013-06-09 15:25:32 -0500: Unable to attach “Macajee’s MacBook Pro.” (Resource temporarily unavailable)
    2013-06-09 15:25:32 -0500:
    2013-06-09 20:02:06 -0500: Disk Utility started.
    2013-06-09 20:05:22 -0500: Disk Utility started.
    2013-06-09 20:07:11 -0500: Disk Utility started.
    2013-06-09 20:18:34 -0500: [DUDiskController viewablePartitions] expecting DUDisk, but got nil
    2013-06-09 20:18:34 -0500:
    2013-06-09 20:19:34 -0500: [DUDiskController viewablePartitions] expecting DUDisk, but got nil
    2013-06-09 20:19:34 -0500:
    2013-06-09 20:19:36 -0500: [DUDiskController viewablePartitions] expecting DUDisk, but got nil
    2013-06-09 20:19:36 -0500:
    2013-06-09 20:22:29 -0500: [DUDiskController viewablePartitions] expecting DUDisk, but got nil
    2013-06-09 20:22:29 -0500:
    2013-06-09 20:22:33 -0500: [DUDiskController viewablePartitions] expecting DUDisk, but got nil
    2013-06-09 20:22:33 -0500:
    2013-06-09 20:22:45 -0500: Verifying Image “Macajee’s MacBook Pro”
    2013-06-09 20:22:45 -0500: Unable to verify “Macajee’s MacBook Pro.” (Resource temporarily unavailable)
    2013-06-09 20:22:45 -0500:
    2013-06-09 20:34:53 -0500: [DUDiskController viewablePartitions] expecting DUDisk, but got nil
    2013-06-09 20:34:53 -0500:
    2013-06-09 20:34:56 -0500: [DUDiskController viewablePartitions] expecting DUDisk, but got nil
    2013-06-09 20:34:56 -0500:
    2013-06-09 20:38:17 -0500: Verifying Image “Macajee’s MacBook Pro”
    2013-06-09 20:38:17 -0500: Unable to verify “Macajee’s MacBook Pro.” (Resource temporarily unavailable)
    2013-06-09 20:38:17 -0500:
    2013-06-09 20:47:35 -0500: Disk Utility started.
    2013-06-09 20:53:06 -0500: Disk Utility started.
    2013-06-09 20:55:30 -0500: Disk Utility started.
    2013-06-09 20:56:40 -0500: Disk Utility started.
    2013-06-09 21:06:32 -0500: Verifying Image “macajee’s MacBook Pro”
    2013-06-09 21:06:32 -0500: Unable to verify “macajee’s MacBook Pro.” (Resource temporarily unavailable)
    2013-06-09 21:06:32 -0500:
    2013-06-09 21:07:08 -0500: Verifying Image “macajee’s MacBook Pro”
    2013-06-09 21:07:08 -0500: Unable to verify “macajee’s MacBook Pro.” (Resource temporarily unavailable)
    2013-06-09 21:07:08 -0500:

  • HT1379 I had to restart by resetting the NVRAM/PRAM.  Now I have a window showing OS X Utilities.  My options are restore from Time Machine Backup (which I could do), Disk Utility to repair or erase, get help online or reinstall OS X.  What should I do?

    I had to restart by resetting the NVRAM/PRAM.  Now I have a window showing OS X Utilities.  My options are restore from Time Machine Backup (which I could do), Disk Utility to repair or erase, get help online or reinstall OS X.  What should I do?  The problem began when I tried to restart my computer and the only thing I saw was the grey screen, Apple logo, and the timer; the computer wouldn't restart from there.

    I searched through trouble shooting options on the Apple Support page and was able to make it this far.

  • Verbatim disk drive historically used only for time machine backups. Recently i added some other media files to use some of available space without partitioning, the disc now refuses to mount in finder despite appearing in disk utility. Repair fails. HELP

    Sorry to elaborate a bit more.
    I have used time machine since owning my mac book pro with no issues. i keep the timemachine backups on an external hard drive made by Verbatim. This has not external power source.
    Recently i decided to use up some of the available space on the external verbatim disk drive to store some movie files which were sitting on my macbook pro.
    Therefore i created a new folder outside of the time machine backup folder and stored the movie files in there.
    From then on Time machine failed... and a few days later i noticed it was not mounting in 'finder'
    Therefore i used disk utility to see if it was recognising it. Which i was. However when i try to repair it the repair process fails.
    In disk utility i am presented with 1 TB Samsung HN M10 which has a child called Verbatim HD.
    The 1TB Samsung hardware appears fine, but the verbatim disk i am unable to fully verify and fix.
    Does this mean i have lost all my back ups?
    Have I lost all the media that i put on there?
    Is there any way to fix this?
    Any help would be appreciated.
    didier07...

    To summarize: You used an external Verbatim HD for your TM backups. Then, you stored some movie files on the "spare" space on the Verbatim drive. Now, Disk Utility isn't being recognized, and repair is disabled. Your home Samsung drive is working fine, but the Verbatim cannot be verified.
    The problem, I believe, is that the external Verbatim drive wasn't partitioned. There should be two partitions: one for TM backups, the other for video. That way, you can perform backups, and still retain some space for video or somesuch.
    Frankly, I don't know how to fix this except through the following. (1) Erase the Verbatim drive, (2) Create a new blank space and format it, (3) Make two partitions - one for backup, the other for video. (4) Run TM through one partition, but switch to the other for your videos.  The better solution might be to have one dedicated drive (perhaps the Verbatim) for backups, and another dedicated drive for video backups; that way, you'll have plenty of space for expansion.
    I hope someone will correct me if I'm incorrect, but I believe you've essentially lost your backups and media. I don't know how you can retrieve that clump of the now-undifferentiated data on the Verbatim drive. To retrieve any lost data, you're going to require another external drive that's larger in capacity, as well as data recovery software; don't expect encouraging results. If you're desperate, there are firms like Drive Savers that can offer a more comprehensive solution - at a cost.
    Post if you have questions, or additional concerns!

  • Restore files from last Time Machine backup after HD erase and install

    I just had to do an "erase and install" ... trying to restore files from my last Time Machine backup but after completing the Airport Utility setup / configure steps, it says "waiting to restart" for a few minutes and then says it cannot find TIme Capsule after restart (though TC never restarted). I'm pretty desperate to get my files back as it's Sunday night and my business needs to be up and running by morning. Any help would be greatly appreciated ... even if it's saying I need to take TC into a Mac store to have them retrieve my files.

    While in Time Machine, press the key combination shift-command-C. The front window will show all mounted volumes. All snapshots should now be accessible. Select the one you want and navigate to the files you want to restore.

  • Help with Time Machine Backups not working..

    Let me preface this by saying I have spent the last day scouring the internet for solutions to my problem. I have tried every option that I have run across and have had no luck in resolving my problem. As a last resort, I'm turning here in hopes that you can be of help.
    I have a 2012 Macbook Pro running Moutain Lion.  I use an external HD for my time machine backups.  I am having an issue with Time Machine not functioning.  The initial error message I receive when I attempt to use TM to backup is:  "Time machine couldn't coplete the backup to Rick's backup disk". "Unable to complete backup. an error occurred while creating the backup folder".
    I searched the forums and net and found several things to do to try and resolve this issue.  My computer will freeze out and not let me erase, or re-partition the the hard drive, so I switched it over to an older macbook of my girlfriends and am successfully able to erase, and re-partition the drive (using disk utility) as suggested by several forum postings I have read.  I am able to run disk verify and disk repair and both say the disk is "ok" with no issues.  The moment the erase and partition is done, her computer prompts a message : "Would you like to use this disk for Time Machine Backups" which tells me it is working properly.  When I move it back to my macbook pro and attempt to run TM backup, it will now work and copy about 10g of my 120g before shutting down with this error message:
    "Time Machine couldn't complete the backup to "Rick's Backup Disk".  An error occurred while copying files. The problem may be temporary. If the problem persists, use disk utility to repair your backup disk."
    If i attempt to re-run TM at that point, I get the original error message:
    "Time machine couldn't coplete the backup to Rick's backup disk". "Unable to complete backup. an error occurred while creating the backup folder".
    If I move the TM back to my Girlfriends computer and attempt to run TM, it will function properly and backup her entire harddrive.  When I erase and try again on mine, I always end up back with the same issues.  It's clearly something in my macbook that is screwing it up.  Can anyone please offer some help! I'd be much appreciative. 

    rcury4 wrote:
    "Time machine couldn't coplete the backup to Rick's backup disk". "Unable to complete backup. an error occurred while creating the backup folder".
    See #C10 in Time Machine - Troubleshooting
    "Time Machine couldn't complete the backup to "Rick's Backup Disk".  An error occurred while copying files. The problem may be temporary. If the problem persists, use disk utility to repair your backup disk."
    Not one of Apple's more informative messages. 
    There's a problem with a file on your system.  See #C3 in the above link. It will show you how to locate the message(s) that describe the problem, then help you fix it.    If that doesn't help, post back with details, including all the messages, what you've done, and the results.

  • Need to restore trashed time machine backup - help

    Help.. 
    I was recently burgled and my iMac and my backup drive ( on which I used TIme Machine) were taken.  So I lost everything. (No, i didnt have the time or extra monel to create another backup for off-sire storage, a mistake i will never make again)
    I have an older ext harddrive that I used to use for Time Machine backups, but since i decommissioned it from being a backup drive, I deleted (trashed) the TM backup folder on it, and have written new data on there.
    So far the situation is sounding grim, I know.   Surely there must be a chance of recovering at lease something from the drive.  
    Will things like MacKeeper  or Stelar phoenix Mac Data recovery  (or others) work?   
    Please help.  I have lost the majority of my life's work (some was on other drives thankfully).

    MacKeeper is something to avoid.   Period.   There are data recovery services but they do tend to be expensive.   Type 'data recovery' in the search box above, you will certainly find some recommendations ... the link below is typical.  
    Accidentally erased external hard drive: Apple Support Communities

  • Help! Macbook Air lost association with USB Airport hosted Time Machine Backup

    Okay, so my wife's Macbook Air was doing Time Machine backup to USB drive attached to previous generation Airport Extreme...
    We bought a brand new Airport router a couple of weeks ago, I plugged it in and everything went smoothly. Plugged in USN drive that attached to older APE router, and it's still visible on the network. However, ever since we got the new router, the existing backups are not associated with the Macbook Air anymore.
    Yes, I can start over with a new backup file, but I was hoping to use the existing backup (it takes a while to backup wirelessly, and we lose the whole history if we wanted to recover previous versions of files that were backed up—I can't think of anything we'd need right now, but Murphy's Law will probably apply if I go ahead and erase the old and start new).
    I was hoping all I would have to do was drag the old backup file onto the Time Machine icon to re-associate it with this computer, but I can't see any way to tell Time Machine, "hey, here's the backup file you are looking for... it's right here on the same USB drive attached to the new router."
    (Also, before anyone says to make sure I have a backup of the backup, I do. The computer is backed up offsite with Backblaze, too.)
    Perhaps it will be best to just start from scratch with a new Time Machine backup, that just seems like overkill, since there was nothing wrong or corrupt with the existing Time Machine file, I just switched what router it was attached to. Thanks for any advice/enlightenment.

    I guess I have a few comments.
    Apple has an opt out.. they do not support Time Machine backups on older Airport Extreme. Apple have always stated it is unreliable and so refused to support it.. only with Gen6 of the AE have they changed to supporting TM backups.
    From your point of view it should have worked.. it may indeed still work. But the change of network is significant and it will take some work on your part.
    1. I need to know what OS is the MBA running??
    2. Moving a disk from one network location to another, I would strongly recommend a full reset of Time Machine on the computer.
    See A4 here. http://pondini.org/TM/Troubleshooting.html
    3. Pondini in the same reference has some info about inheriting old backups .. slightly different context but it also could help.
    see B5 and B6
    4. It is also possible to move old backups into a new backup.. but this is then going too far.
    I would simply buy a new USB drive.. and keep the old backup drive for a few months until your new one builds up sufficient history to be sure you will not need the old ones.. at that point you can use the old backup drive again after a reformat.
    5. To do the new backup, since wireless is indeed a long and burdensome chore to make that crucial first backup, buy a thunderbolt to ethernet adapter.. assuming your MBA is recent enough. Ethernet is so worthwhile having it is required not optional extra. The cost at $35 is one of the cheapest adapters for a very expensive interface..

  • Time Machine wont erase oldest backups

    So at work and at home im having issues with my time machine backups. It doesnt seem that time machine wants to erase the oldest backups to make room for new backups. I have a 1TB hard drive in the iMac and i have 1TB backup hard drive with only 1 partition, all dedicated for backup. It keeps saying...
    "This backup is too large for the backup disk. The backup requires 392.28 GB but only 243.40 GB are available.
    Time Machine needs work space on the backup disk, in the addition to the space required to store backups. Open Time Machine preferences to select a larger backup disk or make the backup smaller by excluding files."
    Thing is that if it needs more space it should get ride of older files, should it not?? a 1TB backup drive should be able to backup a 1TB HD shouldntn it??
    any help would be much appreciated!

    Hi,
    I recommend you slide on over to the Time Machine forum and spend a little time reading the TM FAQ. You can locate them at:
    http://discussions.apple.com/forum.jspa?forumID=1227
    If you still can't find your answer then repost in that forum.
    Roger

Maybe you are looking for

  • Error While Filtering a Particular Value in the Query Navigation

    Hi ALL,         we have a time charecteristic 0FISCPER in our query and the output of the query  is fine until we filter this on the variant  V3 ,system is throwing an error   "System error in program SAPLRRK0 and form SORT_END_TRUE-01- (see long tex

  • JMS and XML in PL/SQL

    I'm prototyping a JMS Listener / XML Parser in PL/SQL. I've not used either technology in conjunction with PL/SQL before, so I'm looking for resources to aid my research. Our current system is a Java Application that receives JMS messages off of a TI

  • No increase in file transfer speed?

    AEBS n connected as a wireless bridge, all networks showing up. IMAC is wired to Linksys router and AEBS is ethernet connected to Linksys. I don't get any increase in speed in transferring files over the network between an IMAC and Macbook which are

  • Everytime I have to reconect... It's just not fair...

    I am using FCP and then importing project files from Live Type to make lower third animations with text. I have both programs running at the same time so I can see the changes over my video. Everytime I make a change to the project in LT, FC wants me

  • KI235 - can post without cost object if select "continue" in profit segment

    Hello all,  I have a GL account where cost object is required.  This works correctly and KI235 error message is given.  However, if I go into the profitability segment and select CONTINUE - even though no cost object is assigned, SAP allows posting t