Time Machine backup files not able to access

Before Reinstalling Mac OS X Lion 10.7.5, I have made my WD My passport 1TB as Recovery HD and then took time machine backup.
After Re-Installing Mac OS X Lion 10.7.5, I am not able to see any of the content in my HD.
I tried to connect Timemachine using Migration Assitant to connect my HD but still it is taking long time.
How can I get back my data in HD to reinstalled Mac.?

There are actually 3 passwords on the Time Capsule - assuming it has the same setup as my Airport Extreme Base Station.
One password for the WiFi connection.
One password to access setup of the device
One password for access to the storage drive - most people leave the check-box to just use the base-station setup password again.
And, as I said before, you also have the option to encrypt your TM backups. So even if somebody runs off with the device and breaks in to the disk, it will all be garbage without the TM password.
This is the screen as it is on my computer:
As you can see, to access my drive I have it set to use the device setup password.
Here is a screen shot of the other options:

Similar Messages

Can anyone access time machine backup files by connecting to time capsule by ethernet cable?

I operate an imac connected to a time capsule. It works great. My internet is connected to the time capsule with an ethernet cable and I access the internet on my imac using an ethernet cable connected to the time capsule. I can also connect to the time capsule using wireless.
A colleague of mine wants to connect to the internet and because of location issues the only convenient way is to let him connect to my time capsule using an ethernet cable. He can access the internet fine and he uses a windows PC. Now my question is, will he be able to access my time machine backup files if he connects to my time capsule using an ethernet cable? I have not given him my password.
Any help will be appreciated. I want to help him get online but I want to make sure he cannot access my time machine backup files.
Thanks

There are actually 3 passwords on the Time Capsule - assuming it has the same setup as my Airport Extreme Base Station.
One password for the WiFi connection.
One password to access setup of the device
One password for access to the storage drive - most people leave the check-box to just use the base-station setup password again.
And, as I said before, you also have the option to encrypt your TM backups. So even if somebody runs off with the device and breaks in to the disk, it will all be garbage without the TM password.
This is the screen as it is on my computer:
As you can see, to access my drive I have it set to use the device setup password.
Here is a screen shot of the other options:

Determining the Size of a Time Machine Backup File

When I highlight a Time Machine backup file and then click on Get Info under File to determine the size of the backup file, the disk drive works its heart out, but the Get Info window never arrives at a determination of the file size being seemingly stuck in the "calculating size" state.
Anybody have an idea of what's going on?
JohnnyS

JohnnyS wrote:
Regarding your statement: "If you Enter Time Machine (the "Star Wars" interface), from a Finder window with a "size" column, then browse your backups, you should be able to see the sizes easily." - what do you mean by the "Star Wars" interface?
Ah, you are new to Time Machine. Sorry, that's how you view and restore from your backups. Hold your mouse down on the TM icon in your Menubar and select +*Enter Time Machine,+* or click the TM icon in your Dock, or the +*Time Machine+* app in your Applications folder.
If I look at the pull-down menu under Finder, I do not see Enter Time Machine. Am I looking in the wrong place? Obviously, since I couldn't get by the first step, I never got to a "size" column, and to be honest, I don't know that I have ever seen a Finder window with a "size" column.
You can add one, by selecting View > as List, then View > Show View Options in a Finder window's menubar, and select or de-select whatever columns you want.
I'm a little embarrassed by my lack of knowledge, but if I don't acknowledge my shortcomings, I'll never get the question answered. Thanks for taking your time to try to help me.
Don't be. We all started at zero at one time or another.
I'm not sure just what you were looking for in your first post. The size of all your TM backups is just the amount used on your external disk, unless you have other data in the same partition (which isn't a good idea). Because of the way TM works, you can't really determine the size of an individual backup, and it really wouldn't mean much.
Perhaps if you clarified just what you want to know, we can help answer it.
For more info on Time Machine, you might want to review these:
Time Machine Tutorial
Time Machine 101
How to back up and restore your files
Time Machine Features
Apple - Support - Mac OSX v10.5 Leopard Time Machine
and perhaps browse the Time Machine - Frequently Asked Questions *User Tip* at the top of this forum.
If you have a problem setting-up or using Time Machine, start with the Time Machine - Troubleshooting *User Tip* at the top of this forum. It will show you how to locate the message(s) that describe the problem, then help you fix it.

I have a time machine backup file on a USB hard drive. I bought a time capsule / airport extreme, flat 3TB. I wish to transfer the backup file from the usb hard drive to the time capsule hard drive. 10.6.8

I have a time machine backup file on a USB hard drive. I bought a time capsule / airport extreme, flat 3TB. I wish to transfer the backup file from the usb hard drive to the time capsule hard drive. 10.6.8

Unfortunately, Time Machine backups that are stored on a drive that has been connected directly to a Mac are completely different than Time Machine backups that are stored on a Time Capsule.
Frankly, it is not worth the effort and trouble to try to transfer the old backups to the new Time Capsule.....my opinion....having done this in the past.
It is possible though, but I would not recommend it due to the complexity and downsides involved with this. To give you an idea of how to do this, check out this support article.
http://pondini.org/TM/18.html
Even if you transfer the "old" backups over to the Time Capsule successfully, Time Machine will not simply "add on" to the old backups.
Time Machine will make a new complete backup of your Mac and then add incremental backups from that point.
My advice.....start a new backup on the Time Capsule and move forward. Keep the USB hard drive around for a month, maybe 2 or 3 in case you need to go back to an old backup for some reason. At that time, you will not likely need the old backups at all since you will have a current 2-3 month history of new backups. At that point, you can erase the USB drive and use it for another purpose.

Time Machine backup file corrupted and locked

This morning when I switch on my Mac there was a dialogue box telling me that my Time Machine backup file was corrupted and that Time Machine would have to create a new backup file.
I am backing up my Macs to a disk connected to my Airport Extreme. It's been working for months without any problems. Other than this morning. Time Machine buddy had the following message:
+Starting standard backup+
+Attempting to mount network destination using URL: afp://[email protected]/MyBookHome+
+Mounted network destination using URL: afp://[email protected]/MyBookHome+
+QUICKCHECK ONLY; FILESYSTEM DIRTY+
+Runtime corruption detected on /Volumes/MyBookHome/iMac27.sparsebundle (fsck_hfs -q termination status: 3)+
+Attempting to mount network destination using URL: afp://[email protected]/MyBookHome+
+Mounted network destination using URL: afp://[email protected]/MyBookHome+
+Backup verification failed for image /Volumes/MyBookHome-2/iMac27.sparsebundle!+
+Moved previous backup image to /Volumes/MyBookHome-2/iMac27_2010-11-01-032949.sparsebundle+
+Recovery backup declined by user.+
+Backup canceled.+
+Ejected Time Machine network volume.+
Has anybody seen something like this before?
I now have a locked and renamed sparsebundle on my disk and backups are not working anymore.

aschmid wrote:
Yes you are right, I know it isn't supported - as so many other things but they work!
This one is notorious for working for a while, then . . . not.
In addition to the problems above I got a pop-up from Time Machine saying the backup file is broken and it needs to create a new one. I told it to go ahead and what happened is that it actually proceeded to DELETE the old backup file before creating a new one - there goes my several months of backup history!
Yes, just as it says in the message. See #C13 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum).
All I can say do now is connect my drive directly to my iMac and figure out a way how I can backup my other iMac and the MacBook I have. On the AE this just worked remotely.
Yeah. Until it didn't.
Really not much options here to backup a home with 3 Macs!?!
Sure there is. Back the others up to the same drive, over your network, via sharing. See #22 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum), for details and setup instructions.

"Time Machine Backups" could not be unmounted (Disk Utilities)

Hi there,
I am having an error message when trying to back up time machine. Therefore I went to disk utilities and verified disk.. said it needs to be prepared. When I try to repair time machine, i then get the following message "The disk “Time Machine Backups” could not be unmounted". I tried again and then it says its been repaired. so when i tried a backup of time machine i get "time machine error. unable to complete backup. an error occurred while copying files to the backup volume"
I have installed "Time machine buddy" and I am getting"error reading system logs"
I have a mac osx 10.5.8. No antivirus or spotlight running that i know of.
Any ideas?

One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode, see if external Drive can be repaired...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.

Hi, Question about secure empty trash. I moved some Time Machine backup files to the trash from an external hard drive. Now I can't secure empty trash. It starts, finds 74,003 files, and does nothing. The external hard drive shows it's empty, but it isn't

I moved some time machine backup files from an external USB hard drive to the trash. Tried secure empty trash. It counts 74,003 items, then just sits there. The external hard drive window shows it's empty, but the info pane says it only has 50G of memory left. I left the secure empty trash on over night. It did nothing. Ideas?
Thanks,
Ron

Relaunch the Finder, then from the Finder menu bar, select
Finder ▹ Preferences ▹ Advanced
and uncheck the box marked Empty Trash securely. Try again to empty the Trash.

Time Machine backups do not migrate from iMac to MacBook Pro

I just moved from a iMac G5 to a MacBook Pro. I love Apple's migration tool, but it seems that Time Machine backups do not migrate.
I checked with support, and did a basic amount of searching, and it seems that I need to erase and reformat the backup drive, losing all of my backups.
Can this be true? That's a pretty screwy backup solution.
Is it possible to rename the backup folder from "iMac G5" to "MacBook Pro"?
Is it possible to add a MacBook Pro backup folder to the one already there?
Any help is appreciated.

I'm not quite sure what you mean. It sounds like you successfully migrated, and got everything set up properly on the new Mac.
Now you want TM to just continue backing-up the new Mac to the old Mac's backups?
If so, then no, that's not going to work. TM keeps the backups for each Mac completely separate. This is usually an advantage, so you can back up two or Macs to the same drive without any conflicts.
Plus, the version of OS on your new Intel laptop is very different from the one from your old PPC desktop; a whole different set of drivers, and of course code for Intel vs. PPC.
So TM on the new Mac cannot treat the old backups as if they were from the new Mac. It must start a whole new "sequence" of backups for the new Mac. If there's room on the disk, you can leave the old backups there until you're sure you don't need them, but that presents another problem: when you want to delete them, you can do it only one at a time, via TM, using the procedure in item #12 of the Frequently Asked Questions *User Tip* at the top of this forum. That's rather tedious and time-consuming, so most folks just erase the TM drive and let it start fresh.
If I've misunderstood, please clarify the situation.

How do I unlock my external hard drives one has photos on them one is trying to run time machine and is not able to complete a basck up.

How do I unlock my external hard drives one has photos on them one is trying to run time machine and is not able to complete a basck up.

VK said for locked HDs and volumes at http://discussions.apple.com/thread.jspa?threadID=2329689
sudo chflags 0 /volumes/*
sudo chmod a+rx /volumes/*

Re Time Machine "You do not have appropriate access privileges to save file ".002332b7be8a" warning preventing backups--this may help temporarily

My TM is often giving me the "You do not have appropriate access privileges to save file “.002332b7be8a” in folder “Time Machine Backups”" message when I go to select my backup drive. I've reviewed past archived discussions on this and, like many other people, gotten completely flummoxed trying to find a permanent solution. Tried the suggested fixes via Terminal and it didn't help because I couldn't get through the entire process without Terminal telling me it couldn't find a file or drive. When I can find the time, I'm going to try Tinker Tool to reveal where that numbered file actually is and give it another go.
In the meantime, for those who are desperate to get their TM working again to get at least one backup done, I can offer people a temporary solution that's worked for me.
I've found that restarting my iMac somehow resets TM and usually allows it to do at least one of its automatic backups, sometimes several, before it reverts back to failing and producing that same darn warning message. I only want a backup done once a day, so it's not that inconvenient to go this route.
There's another even quicker method (perhaps a little more risky but hasn't been a problem for me yet) that I've been using more recently, and that is to simply unplug the external while the iMac is on (I close system preferences first though, and make sure TM isn't actually doing anything at the time) then plugging it back in and choosing the backup drive again in the TM system preferences window once that drive has shown up again in the Mac's list of devices. I don't get that warning message when I do this. It works every time for me and so far it hasn't lost or corrupted any data on the external, despite the warning message you get on Macs when you unplug a USB device without ejecting it first. However, do this at your own risk--don't flame me if it backfires on you. If you're of the opinion that it's not wise to unplug the device this way, then fine, go ahead and state such in this thread, but be polite about it.
Hope this helps anyone who's frantic to make a backup without having to start from square one with a whole new complete initial backup (can take many hours to make one) on a fresh external drive.
By the way, I've read somewhere that this problem was fixed with Snow Leopard. Whether that's true is another matter. I'm not quite ready to update to 10.6 for other reasons, even though I bought it, and I figure some other people are also still using 10.5.8 out of fear and loathing around the unknowns of installing a new OS too, so that's why I thought I'd post this message (couldn't find a discussion around this that was still active and not archived).

noodlenose wrote:
My TM is often giving me the "You do not have appropriate access privileges to save file “.002332b7be8a” in folder “Time Machine Backups”" message when I go to select my backup drive.
Wow, I haven't seen that in a looooong time!
Tried the suggested fixes via Terminal and it didn't help because I couldn't get through the entire process without Terminal telling me it couldn't find a file or drive.
Do you mean in #C5 of Time Machine - Troubleshooting?
When I can find the time, I'm going to try Tinker Tool to reveal where that numbered file actually is and give it another go.
It should be at the top level of the drive.
By the way, I've read somewhere that this problem was fixed with Snow Leopard.
Yes. I'm not sure if it was 10.6.0 or one of the early updates, but I haven't seen any reports of this in quite a while.

Time machine backup files gone and can't create new backup

Last week I noticed on my Time Machine backup HD that the Backup.backupdb files were gone. Also I am unable to complete backups any longer. I get an error "The backup disk image “/Volumes/Time Machine-2/walle.sparsebundle” could not be accessed (error -1)."
This Volume "Time Machine" is connected to an Airport Extreme 7.6.1. I have ejected the disk, disconnected all users, cycled the power on my computer (2.26Ghx MacBook running 10.7.5), Airport, and HD. All it does after I eject is that it give the Volume a new number...ie instead of "Time Machine" it becomes "Time Machine-1"...then "Time Machine-2" and repeates the error message with the new name. So I cannot start a new backup because of the above error on top of not being able to find my old files.
Thanks for the help

Hmmm.. sorry to jump in but...
I Wish I had seen this before I got mine.
Mine has been doing this auto eject stuff too.
I think I just plugged it in and TM let me select it but is it possible
I should have reformatted it with DU first, like with all the WD drive problems ?
Is it too late for that ?
Or just try to return it or get rid of it ?
TIA

Time Machine Backups disk not automatically unmounting after backup completes in Lion

I am using Time Machine over WiFi on a 3rd party USB drive shared as an AirDisk through an Airport Extreme router. Ever since switching to Lion (clean install), I have noticed that the Time Machine backup disk will not automatically unmount after a backup is completed. This creates a problem when my MacBook Pro comes back from sleep. Specifically, the WiFi notification icon in the Finder toolbar indicates that WiFi is connected, even though it's not connected to a network, and I am unable to connect to any networks for what seems like several minutes until the Time Machine backups disk disappears from the desktop and WiFi actually connects.
Since the disk was not cleanly unmounted, Time Machine then keeps complaining that the sparse bundle file is locked and cannot be mounted every time it tries to do a backup. I have to either disconnect/reconnect the USB drive physically from the router, or restart the router every time this happens to resolve the issue. That is getting really annoying to have to do every time. I suppose I could manually unmount the Time Machine disk after every backup but it's ridiculous to have to do that every time I want to put the computer to sleep.
Is anyone else experiencing this issue and is there a fix?

For others who might be having this problem - I was able to resolve it by connecting my backup disk to my mac via USB, completely erasing it, and starting over from a new backup. Disk Utility was not reporting any errors when I verified the disk, but I went ahead and repartitioned it and started fresh. The disk now automatically unmounts after backups complete.

How do I restore Time Machine backup files (from TC) to an external HD?

I did a full Time Machine backup of my machine to a Time Capsule. All told, around 500GB. The MBP to which I'd like to transfer the files doesn't have a big enough hard drive. However, I do have a 1TB External HD that I could use. Can I use Time Machine or Migration Assistant to move/access the files? I'm using Lion.

See: Mac 101- Time Machine, Time Machine - 101 Tutorial, Pondini's Time Machine FAQ - All You Need for Time Machine, and Pondini's Time Machine FAQ.

HT204350 USB Time Machine backup drive not visble in Mavericks Migration Assistant

Hi all,
Yesterday I updated my dad's iMac from Snow Leopard (SL) to Mavericks. Seemed to work ok apart from the fact that turning on iCloud wiped out the calendars. In order to get the calendars back I restored from the most recent SL Time Machine backup. This turned out to be a big mistake! It did get the calendars back but stopped all programs not included in the OS X install to stop working!
I then managed to get a bootable flash drive installer for Mavericks sorted out and installed a fresh copy of Mavericks on the computer with the plan of using Migration Assistant to bring all my dad's files, settings, etc over. The problem is that when I open Migration Assistant and try to migrate from the USB Time Machine backup drive, the drive doesn't show up in the list.
I have also tried restoring from the Time Machine backups that were made straight after the upgrade to Mavericks as I have exported copies of the calendars now and that was the only issue at the time but when I do that the restore fails after about 4.5% progress.
Any help would be amazing as my dad runs two small businesses with the computer and the down time causing quite a few issues.
Thanksin advance!

If you synchronize any of your calendars with a server such as iCloud, disable that synchronization. Quit Calendar.
Triple-click anywhere in the line below on this page to select it:
~/Library/Calendars
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder selected. Enter Time Machine and restore that folder from the snapshot you want.
Relaunch Calendar and test. Your calendars should be as they were when the snapshot was taken. If you don't sync with a server, stop here. If you do sync some of the calendars with a server, select each one in turn and then select
File ▹ Export ▹ Export…
from the menu bar. You'll get ICS files with the filename extension ".ics". Re-enable sync. Usually, all the calendars you just restored will be deleted. That's not a problem. Create a new calendar on the server for each one you exported and want to sync:
File ▹ New Calendar
Then import the calendar from the corresponding ICS file by double-clicking it. Follow the prompts to import the new events to the calendar you just created. For calendars that you don't want to sync, just import them again. They'll appear in the calendar list under On My Mac.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

Time Machine backup file differs in size from HD

I just backed up my MacBook for the first time using time machine to a time capsule. I checked out the file size of the sparse bundle file and its approx. 70gb, however my HD has 86.5gb on it. Is this correct? I thought the backup file would be the exact same size as the HD.
Also, there is a disk image mounted under the HD in the finder called "Backup of "name's" computer". Does that have to stay or can I eject it?
Thanks in advance for the help.

cgapper wrote:
Thanks for the info on the disk image, it has since disapeared.
16gb of size difference seems like a lot. Could it be that there are 16gb out of 86gb that isn't being used efficently on my HD? While it was doing its initial backup, I noticed toward the end when I checked on it in the morning, there was still approx 16gb left to transfer.
I agree, 16gb is "a lot" just for fragmented files. When I performed my first full backup, the disk image virtually matched the size of my data on the Mac. So I don't have an explanation not knowing more about your setup.
BTW - How did you check "the file size of the sparse bundle file". Are you connected via ethernet or wirelessly? When ever I call up Get Info wirelessly it never reports a size, just "Calculating size...".
When I checked back a few mins later, the figures in the progress box had changed to 'xx' mb out of 6mb. Seems kinda wierd to me. Any more thoughts on that? b
Yes, what you say at the end was the 2nd pass of Time Machine. This explains it...
*Time Machine Appears to Make 2 Backups*
It is normal for Time Machine to perform two passes with each backup. This is because some files/folders have likely changed while Time Machine was performing the first pass of the backup backup, particularly if the current backup took some time to complete or your computer was in use during the Time Machine backup. So it picks up those changes with a second pass. George Schreyer refers to this behavior in his article on Time Machine: “The copy process is pretty straight forward and can happen in two passes if changes happen DURING a backup.” [http://www.girr.org/mac_stuff/backups.html]
Cheers!

Time Machine backup files not able to access

Similar Messages

Maybe you are looking for