Time Machine backup from previous computer

So I just traded in my 2009 iMac for a Mac Pro. I had backed up everything from the iMac using Time Machine. Is getting all that info back on the new Pro as easy as turning it on, mounting the Time Machine drive and getting it rolling? Or is there a step I'd be missing. Don't want to screw it up!
Thanks in advance!

NO!
It is easier.
When you start up your new computer, it will run the Setup Assistant. During that process it will ask you if you want to bring forward your previous data, and ask you to specify where it is.
Because you are running nearly the same class of Mac, you can do this without much worry. If converting from an older Mac, especially PowerPC to Intel, you should be careful NOT to migrate your Old Applications, because they will not be optimized for Intel Processors and may exhibit wieird problems.
Some here would suggest that you should re-install ALL your Applications anyway, regardless of what they were running on before. If any Application gives you trouble, that would be the first thing to do -- re-Install from the original CD/DVD.

Similar Messages

Help with restoring from Time Machine Backup from another computer

I was required to dump my Mac OSX on my MacBook Pro and convert to a windows machine to use a testing software that did not allow boot camp. Before doing so, I backed up my hard drive to a partition of my iMac via a wireless connection. I am now using a boot disk to try to restore my system from the Time Machine backup on the iMac. I have logged onto my wireless network, but the Mac OSX Installer just keeps saying "Searching for Time Machine Backups..." My iMac is on (typing this now) and is active on the network. What do I need to do to be able to see my Time Machine backup from my MacBook Pro?

Hi m,
I don't know if this would make a difference or not, but you could try booting the iMac in FireWire Target Disk Mode.
http://docs.info.apple.com/article.html?artnum=58583

Can't view time machine backups from old computer on new computer

My macbook pro laptop recently died and I am trying to access its time machine backup data through Finder on a different computer. In each one of my folders from different dates, however, the majority of the computer folders I would like to access (i.e. desktop, documents, dropbox, etc) have a little red "no" sign in the corner and prompt the following message when selected:
"The folder “FolderName” can’t be opened because you don’t have permission to see its contents"
How can I gain permission to see its contents? As the former user, I know whatever passwords are restricting these files, but I don't know how/where to go to give permission to these folders. I've tried going into Disk Utility and changing the permissions there, but to no avail, despite successful changing of the "Sharing & Permissions" to "Read & Write" for all listed accounts.
I'm currently trying to view this on an imac OSX 10.6.8. The dead MacBook pro ran OSX
thanks
kate

Hi Kate,
It sounds like you're running into an issue trying to recover that was on your previous Mac from a Time Machine backup. The article linked below will walk you through the process of recovering the data from your older Mac's Time Machine backup.
OS X: How to migrate data from another Mac using Mountain Lion and earlier
http://support.apple.com/kb/HT4889
Time Machine or other disk migration
If Migration Assistant isn't running on the target (new) Mac, open Migration Assistant (located in /Applications/Utilities/), select "From another Mac, PC, Time Machine backup, or other disk" then click Continue.
Connect your external hard drive if necessary.
Type in your admin password when prompted and click OK.
When the target Mac asks you for a migration method, select "From a Time Machine backup or other disk", then click Continue.
Select the Drive, Time Machine backup, or Time Capsule. If you select Time Capsule you will be prompted to enter the Time Capsule password. After entering the password, select the Time Machine backup.
Close all other applications on the source Mac, then click Continue to start the migration options.
The source Mac will ask you to select items to migrate.
You can customize your selection by clicking to open the disclosure triangles.
After you click Continue, the Migration Assistant will begin to transfer files to the target Mac. The amount of time that it takes for migration to complete depends on the amount of data being transferred and the speed of the network.
Note: To view documents that were migrated, choose Log Out from the Apple () menu, then login as the migrated user. The migrated documents will be located in the migrated user's home folder.
I hope this helps.
-Jason

Time Machine backup from previous install

Hey there,
I am a small question for the use of Time Machine. I have a week of backups in Time Machine and I am pretty happy with how it works, but my questions is IF I format my computer with a clean install of Leopard, will my "old" backups in Time Machine still work with the new install?
Will I be able to recover some files etc. from TM when backuped up in an old install?
Thank you in advance.
Kristia

It worked for me. I had several major problems with Leopard, I think due in part to using Disk Warrior on it. So I removed it and installed Tiger from a (cloned copy) external backup drive. Once my work was done I backed it up, then reinstalled Leopard via Time Machine restore running off the Leopard install DVD. I chose an earlier date, to avoid the problems I saw on the last time I used it and this time it worked.
The only thing was it took about 17 hours to restore the iMac back to Leopard.
I am using a Buffalo one TB external drive as my Time Machine backup drive. I highly recommend it since as soon as your current drive fills up Time Machine will start to recycle the previous backup copies. So the larger the drive the greater time span you can go back and recover from, otherwise over time your old files will be lost.
I hope this answered your question.
Don

Restore Time Machine backup from different computer?

I'm going to put a new HD in my MacBook Pro.
Once I've done it will it be possible to restore my user folder, applications etc. from a different computer's (Power Mac) Time Machine backup?

Thanks again Joe.
One last question. Once I've transferred my files from the Power Mac's Time Machine disk could I select that disk in MacBook Pro's Preferences as it's Time Machine backup disk?
(Effectively stop using it as the Power Mac's backup disk & continue using it as the MacBook Pro's backup disk).
Backing up new files on the MacBook Pro to the disk, but still be able to 'go back in time' & restore files from the Time Machine disk (backup up over time on the Power Mac).

How can I recover time machine backup from previous iMac?

How can I recover some datas from a Time machine backup regularly done with my old imac,using now my new i7?
Problem is that when I open timemachine app,it's not giving me any chance to go "back" in the past snapshots of my desktop nor giving me any errors.So I suppose I'm doing something wrong
Any help?
Thanks

It's TimeMachine,
http://web.me.com/pondini/Time_Machine/Home.html
https://discussions.apple.com/message/16276201#16276201
http://www.macupdate.com/app/mac/29553/back-in-time

Restoring Time Machine backup from different computer

Last night my iMac hard drive crashed. I couldn't retreive any data as the Hard Disk was just not reading anything. I have since then reformatted the disk and have reloaded the OS.
Since the iMac is used primarily for home I don't backup the files on it. Most of my work is on my Macbook pro and I would like to keep the iMac like a mirror image of the Macbook. I am trying to restore a backup from my Mackbook Pro but there seems to be some problem.
I tried 'Browse other Time Machine' last night but after leaving the machine to restore the files overnight I have woken to find that nothing has been restored. Now I am trying to restore just the 'Users" and it's been 1 hour or so and all I am getting is 'Zero KB of 81.5gb - Estimating time remaining'.
What am I doing wrong? Why isn't any data transfering to my iMac? I ran the disk utility to check my disk and it was fine.

Read here on Pondini's Time Machine page on using Migration Assistant

I just restored my 13" MBP i5 at the apple store to the newest version of Lion after issues with a previous Time Machine backup from Snow Leopard- this time I created a new account and just ported files and folders, and now MS Office doesn't work. Help?

I just restored my 13" MBP i5 at the apple store to the newest version of Lion after issues with a previous Time Machine backup from Snow Leopard- this time I created a new account and just ported files and folders, and now MS Office doesn't work.
^^ that's the main problem. Here's the full history.
I bought a new 13" i5 MBP, early 2011 edition. I had an old white Macbook 2.14 ghz core2duo on Snow Leopard. I attempted to port over my time machine backup, but encountered problems in that my User was inaccessible from the new computer after the import finished, and I had to go in and change the root password, etc, and for some reason or another, I couldn't install any programs at all from that administrator's account. By "couldn't" I mean I could install them, but upon installation they would never boot. So, I took it to the apple store and did a clean install from the most up to date Lion OSX. Then, I created a brand new admin account, instead of trying to import the old one, and things seemed great. Then, I just imported my old files from the TM backup, but not any system settings, permissions, or user data. Just my Docs, pics, vids, apps, and itunes stuff.
Here's where things get weird again. I imported this stuff under the name "old", but all of these folders have a red negative sign on them, marking them as restricted. So, from my main admin account, I cannot even peruse these folders. Since I didn't import user data, I can't sign in to the "old" account to change permissions. I already tried to change the permissions from system preferences, but that didn't change anything. And now, for whatever reason, of all the apps that were imported then, MS Office is the only set of apps that does not work. When I click on it, it just says there was a problem and asks if I'd like to send a report to apple. I tried reinstalling it to no avail. I'm an English student, so i really need access to Word. Can anyone help? The Apple store is a major detour for me and would like to fix this issue myself.

Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.)

Help: cannot retrieve old files from Time Machine backup on new computer!

I backed up my old Macbook Pro for several months. I've got a new Macbook Pro and I succeeded to restore the last content of the old one using the migration assistant.
However, now I need some older files that I know are in the backup, but I can't restore them because you apparently can only do that with the computer from which you made the backups... a Time Machine backup is 'tied' to the sparsebundle using the MAC-address of the computer...
I don't have my old computer anymore, does this really mean that all the old file in the backup are lost for me? Or is there an other way?
Please help.
Wim

Wimek,
According to this KB article (http://support.apple.com/kb/TS1760)
"When upgrading from one Leopard-based Mac to a new Leopard-based Mac, and you wish to use Time Machine backups from the previous Mac, make sure the computer name of the new Mac (in Sharing preferences) is the same as your previous Mac's computer name was when its Time Machine backups were made. Afterwards, if the previous Mac is still on your network, give it a different computer name."

How can I use the Time Machine Backups from my Old Computer?

I have two months of Time Machine backups made using my old Macintosh computer which died and I no longer have. I have now purchased a new computer and am trying to use the Time Machine back ups from the original computer, but it will not recognise them. How can I get my new MacBook Pro to use the Time Machine Backups from my old Computer? I phoned the Apple help line and they said I cannot use them and would have to delete them. This sounds crazy if you can only use the Time Machine back up file with one computer and have to delete it when you buy a new Mac. Surely there must be some way to transfer ownership (not files) from an old to the new Mac?
Thanks
Richard

Thanks Kevin for the suggestion posted on MacOSXHints how to "Repair Time Machine after logic board changes".
http://www.macosxhints.com/article.php?story=20080128003716101
It seems as though I am not alone with my frustration with the way Time Machine uses the MAC address of a computer to tell one system from another. This means that if you have your Mac repaired with a new logic board, or replace your system with a new one, you can't resume backups where you left off. Reading through the readers who used the fix using Terminal, it appears that the fix does not always work. I contacted Apple again, but they were no help. Surely Apple should come out with a solution as more and more people use Time Machine/Time Capsule.
It is CRAZY that after a change computers or a switch in the computer logic board that you cannot resume your Time Machine back ups.

Time machine backup from external hdd to time capsule

Is it possible to transfer an time machine backup from an external hdd to a time capsule? I have changed the original 2tb time capsule hdd to a 3tb hdd because of loud sounds from the 2tb hdd. Now i want to transfer the backup from the (now external) 2tb hdd to the new 3tb hdd which is now in the time capsule. Could anybody help me?

Yes, it should be easy.. just copy the sparsebundle from the old 2TB plugged into your computer to the TC.
This will take a few hours maybe a lot more if the drive is near full.. use ethernet.. do not even dream of using wireless.. Do not plug the 2TB into the TC USB.. that is super slow.. plugged into your computer with a FW hard disk holder would be the ideal.. but USB is ok.
http://pondini.org/TM/18.html
Is it worth it??
Saving old backups.. or simply start again.. a clean fresh backup is much more efficient. Put the 2TB drive in a draw.. if you haven't needed any files on it in 6months from now.. wipe it.

Cannot transfer Time Machine backups from one external drive to another

Since I bought my 13 inch MacBook Pro in September 2014 I've been keeping Time Machine backups on an external 1TB Lacie Rugged. This is partitioned into three and one of the partitions contains my iPhoto library.
Last weekend I left my MBP disconnected from the power source but with the external hard drive still plugged in. Long story short - the battery level fell below the minimum needed to operate so it turned itself off and 'disconnected' the external hard drive. This resulted in a corrupted iPhoto library which is no longer accessible.
In order to restore my iPhoto Library from another backup I needed to buy a second external hard drive. Yesterday I bought a 2TB Lacie Rugged which I've now partitioned into 5.
I want to move my Time Machine backups from the 1TB Lacie Rugged to a partition on the 2TB Lacie Rugged (to take advantage of the new Lacie's Thunderbolt connection).
I read the Apple article -
HT202380: Time Machine: How to transfer backups from the current backup drive to a new backup drive
and followed the instructions precisely. About 2 hours into the transfer I came back to my MacBook Pro and saw a message saying that it was not possible to complete the transfer because I did not have the correct permissions. The only option was to click the OK button which stopped the transfer.
Can anyone advise what I should do next?
Cheers
Tricia

Hi Eric,
Thank you for your response. I came across another thread yesterday which suggested the Restore via Disk Utility method. It worked for me, too. This was after I had tried following the method suggested in the Apple article above three times but each time the message was the same ....
The operation can't be completed because you don't have permission to access some of the items.
I dare say that Apple would like to have us believe that it's a simple matter of 'drag and drop' but it certainly wasn't for me. From what I've read the permission problem crops up fairly frequently. Before the second and third attempts I had already amended Permissions on the Time Machine backups so that everyone could read and write, so that mustn't have been the problem. I'm the only person who uses my computer so that's not a problem.
The next problem I have is that I decided I would use the Restore route to transfer my SuperDuper clone rather than start from scratch. Unfortunately, the partition size on my original backup disk where SuperDuper clone is is 350GB and the size of the SuperDuper clone partition on my new backup is 300GB.
Of course, Apple says you can resize partitions using Disk Utility. What they don't say is you can downsize partitions but (in my experience and that of many other frustrated users on various forums) you CANNOT upsize using Disk Utility. I have 100GB spare on my external hard drive (from downsizing two partitions by 50GB each) BUT there is no way Disk Utility will let me increase the size of SuperDuper partition to 350GB :-(((
Cheers
Tricia

Move Time Machine backup from hard drive to Time Capsule

I have a new Time Capsule. Can I move my existing Time Machine backup from a hard drive to the TC? The tips given back in 2010 in this forum are no longer available.

It is extremely difficult if the disk you are talking about is plugged into your computer.. TM does different kind of file for network drives.. so you need to trick it.
See Q18 here.
http://pondini.org/TM/FAQ.html

Deleted Time Machine Backups from Finder

I back up my MacBook with Time Machine. My girlfriend has an older MacBook Pro, with Tiger. I was surprised to see that Tiger did not come with any sort of backup utility, and I eventually found Super Duper. I made a backup with Super Duper to my external hard drive with my Time Machine backups. Her computer died, and she took it to Apple. They could not restore her data, which wasn't a big problem because I had made a very recent back up.
I then proceeded to restore the backup. I thought SD kept track of what files belonged to what computer, like TM does. It started copying my TM backups to her hard drive. This wouldn't be a problem, except she only has a 160 GB hard drive, and her backup is about 100 GB and my TM backup was another 100 GB. Thus the file restore would fail. I decided to delete the TM folder, because I was not worried about my computer, and I could create another backup after partition to avoid this disaster again.
I deleted the TM backups... and my drive still had 200 GB of used space. Then I used Google to find out how I royally messed this up. That being said and done, I have had Disk Utility repairing my external hard drive since Thursday at 5p, and it's now 8:40a on Saturday. Furthermore, while I deleted the files, SD still enumerates them and somehow copies them which fills the hard drive before the restore is complete. When I plugged my external hard drive into my MacBook, it automatically started a new TM back up. However, it renamed the folder "Andrew Fawcett's something (2)", as if it were a duplicate folder. So OS 10.5.8 knows somehow that there are files, and so does SD, but I cannot see them.
Apple's support told me to delete the TM backups in Finder... and to fix the invibile files to reformat the drive. How do I fix my TM backups so I can get SD to work? I have files I need to restore! From what I've read, there are a few of you familiar with SD.

afawcett wrote:
I back up my MacBook with Time Machine. My girlfriend has an older MacBook Pro, with Tiger. I was surprised to see that Tiger did not come with any sort of backup utility, and I eventually found Super Duper. I made a backup with Super Duper to my external hard drive with my Time Machine backups. [snip]
I then proceeded to restore the backup. I thought SD kept track of what files belonged to what computer, like TM does. It started copying my TM backups to her hard drive. This wouldn't be a problem, except she only has a 160 GB hard drive, and her backup is about 100 GB and my TM backup was another 100 GB. Thus the file restore would fail. I decided to delete the TM folder, because I was not worried about my computer, and I could create another backup after partition to avoid this disaster again.
I deleted the TM backups... and my drive still had 200 GB of used space. Then I used Google to find out how I royally messed this up. That being said and done, I have had Disk Utility repairing my external hard drive since Thursday at 5p, and it's now 8:40a on Saturday. Furthermore, while I deleted the files, SD still enumerates them and somehow copies them which fills the hard drive before the restore is complete. When I plugged my external hard drive into my MacBook, it automatically started a new TM back up. However, it renamed the folder "Andrew Fawcett's something (2)", as if it were a duplicate folder. So OS 10.5.8 knows somehow that there are files, and so does SD, but I cannot see them.
Apple's support told me to delete the TM backups in Finder... and to fix the invibile files to reformat the drive. How do I fix my TM backups so I can get SD to work? I have files I need to restore! From what I've read, there are a few of you familiar with SD.
SuperDuper! copies entire volumes. That's why it tried to transfer those Time Machine files. If you register SuperDuper! (USD28), you can tell it to exclude certain files, such as those TM files.
If you want to use an external drive for both TM and other storage, you might be happier if you partitioned that drive, using one partition for TM and the other for any other files.
Until you have this resolved, I'd turn off TM on both computers.

Transferring Time Machine backup from old to new Time Capsule

After transferring my old Time Machine backup from a 5 year old Time Capsule to a new Airport Time Capsule, my MacBook Air wants to start a new full Time Machine backup to the new TC. I was under the impression that the Time Machine backups would pick up where they left off. Was I mistaken? Is the backup supposed to begin anew even if you've transferred an old backup?
Also, if it must begin from scratch, how would I access the old TM backups if I needed to restore a file from the old backup?
Thanks for any help you can provide.

pmpknetr21 wrote:
After transferring my old Time Machine backup from a 5 year old Time Capsule to a new Airport Time Capsule, my MacBook Air wants to start a new full Time Machine backup to the new TC.
How far did you go? By that I mean did you allow the MBA to actually start the backup.
It can be very simple thing.. I have done it lots of times in my repairs to Time Capsules.. if I move a sparsebundle to another location, TM will not even check for the old sparsebundle until it start running.
So the operation is as follows..
Move the sparsebundle.
There is an Apple document as well as what Pondini produced.
Transfer TM backups..
Apple doco. http://support.apple.com/kb/ht5097
Pondini doco http://pondini.org/TM/18.html
As long as you are talking network backups it doesn't much matter. The same rules apply to moving the sparsebundle.
When you reset TM to the new location of the backup.. it will always tell you it will begin a new backup..
As long as you did not change the computer name.. or install a new OS or upgrade.. only when the backup actually starts will it look for existing sparsebundles.. find it.. and begin from where it left off.
So you simply have to start. Wait for TM to figure out there is an existing sparsebundle with the correct name.. and start what will often be a deep scan of the existing sparsebundle. So it can take a long time.. and we do still recommend doing this first one by ethernet.. albeit on an Air that does mean buying the thunderbolt to ethernet dongle.
As a general principle I generally recommend people do start a new backup. Archive the old one.. it is easy to access old backups.. Again see pondini FAQ.. 14-17 on all the neato things you can do.

Time Machine backup from previous computer

Similar Messages

Maybe you are looking for