Time Machine Backup - HELP!

Hi there!
I have a couple of things....
I have set up my Time Machine via a wireless network and to use as a mini server for my home business.
I want to back up two macbooks via ethernet cable for the first initial backup. Wouldmi have to reset the time machine up from scratch again with the ethernet connection? and also would it delete my folders on the time machine once i set up again from scratch?
Also, once i have backed up the macbooks, i will then set it up again to connec wirelessely but i assume it wont delete the first back up will it?
Ashley

Ashley,
You mentioned that I have set up my Time Machine via a wireless network and to use as a mini server for my home business.
Does this mean that you configured it to "Join a wireless network"? If yes, when you configure the Time Capsule this way, the device becomes a wireless hard drive.....and the Ethernet ports are not enabled.
Backing up using Ethernet is a great way to save time on the first backup as it will likely be 3-5 times faster than wireless.
Unfortunately, you will have to reconfigure the Time Capsule if you want to do this....and then reconfigure it back again after the first backups are done.
Not sure if you want to do this. Do you know how much space on each computer needs to be backed up?
If you are able to connect your Time Capsule to your wireless router using a permanent Ethernet cable connection, we can provide you with a setup that will allow either wireless or Ethernet backups to occur....with no change in settings required. Here I assume that your wireless router has an available Ethernet port on the back of the device.
Post back to let us know how you want to proceed, or with your questions.

Similar Messages

Need to restore trashed time machine backup - help

Help..
I was recently burgled and my iMac and my backup drive ( on which I used TIme Machine) were taken. So I lost everything. (No, i didnt have the time or extra monel to create another backup for off-sire storage, a mistake i will never make again)
I have an older ext harddrive that I used to use for Time Machine backups, but since i decommissioned it from being a backup drive, I deleted (trashed) the TM backup folder on it, and have written new data on there.
So far the situation is sounding grim, I know.   Surely there must be a chance of recovering at lease something from the drive.
Will things like MacKeeper or Stelar phoenix Mac Data recovery (or others) work?
Please help. I have lost the majority of my life's work (some was on other drives thankfully).

MacKeeper is something to avoid.   Period.   There are data recovery services but they do tend to be expensive.   Type 'data recovery' in the search box above, you will certainly find some recommendations ... the link below is typical.
Accidentally erased external hard drive: Apple Support Communities

Newbie asking iMac Pros for Time Machine Backup help

I have tried to do a lot of reading (FAQ & Google Search) about Time Machine. I have to admit it seems more than a bit complicated to me. In fact, perhaps I read and searched too much.
1) I have a wireless mouse and a wireless key board which work well with my iMac, although my mouse seems to use-up/run-down batteries (I do use rechargeable usually) somewhat fast. I have my DSL modem plugged into the Ethernet slot. I assume that means I can not use an ethernet cable with a Time Capsule drive. Will a wireless Time Capsule drive run as easily as my mouse and keyboard have? I'll be honest, $299 seems a bit steep if my iMac's life is only going to be around 3-4 years. Of course, losing everything on my internal HD wouldn't be a picnic either. I have manually backed up data such as mp3's, photos, and other files onto a Mentor HD, but it is not nearly big enough for Time Machine.
2) If I were to buy an external drive that I hook-up via USB cable, I need a iMac Pro to give me a good idea as to which ones seem to have had the best "life." I have a 1T internal drive; I assume that I should buy a 1T external drive, although I can't see me actually using that much space. Could I get by with a 500g, I wonder.
3) Finally, I would really appreciate if you could give me some pointers on what would be the best drive and best way for me to use Time Machine. I can come up with $200-$400 that may be necessary, even if I complain about doing it.
Thanks in advance if someone can help guide me.

JohnHusk wrote:
A) Time Capsule is NOT a wireless external HD as such; in other words, I can not just store my Time Machine backup data on it WITHOUT hooking it up to a Network.
well, that would be the most convenient solution.
you can turn the TC's wireless off and, by using an _*ethernet switch*_, could hook up both modem and TC to your iMac's ethernet port. i haven't tried such a setup but i believe it should work.
another option that i haven't tried would be to share your iMac's internet connection wirelessly with the TC by enabling +internet sharing+ in system preferences > sharing.
B) I can hook my DSL router into Time Capsule, but then I would have to configure Airport in order to connect my iMac to the internet?
yes. the setup is very easy.
C) ... I do not have a home network.
if your iMac has an airport card, you do
and I have my printer hooked-up to my iMac via USB.
the TC has an USB port for sharing e.g. a printer on your network
I do have a 7-year old working Dell Dimension that is not currently hooked-up to the Internet, unless I remove the Ethernet cable to the iMac and plug it into the Dell.
again, using an ethernet switch, it can be hooked to your iMac along with the modem. or, it could be connected to one of the TC's ethernet ports.
in fact, i have both my Macs and my Apple TV hardwired to my TC. additionally, by using *powerline adapters* _*such as these*_, i have an older airport extreme and two PC's connected to it via ethernet as well.
I'm just not grasping the overall concept too well. I read the section about Time Machine in my "Mac OS X 'In Depth'" Manual. I also have been trying to search the forums and use iMac Basics on the Apple Home Site.
see _*Time Machine 101*_ for more information.
JGG

Macbook Pro -yosemite install stalls at disc select with ''This disc is used for Time Machine Backups' - help !

Having downloaded Yosemite it installed fine on my iMac but on my Macbook Pro installation has frozen at the Disc Selection stage (where you want it to install) with the message 'This disc is used for Time Machine Backups'.
I cant find a way past this to complete the installation.
Any ideas anyone ?
Many thanks.

Time machine needs its own partition to operate. So you are not going install a OSx Lion on that volume.
If there is enough room you may be able to partition the drive on the fly with DiskUtility
Are you saying you clean installed Lion and you are trying to move your user Data over with TM via the migration Assistant? Please explain.

Restoring iTunes library from Time Machine backup -- help!

I'm trying to restore my iTunes library from TM backup. I can restore songs from individual albums, but if I try to restore multiple albums at once I get this error: "The operation can’t be completed because you don't have permission to access [name of file containing a song]." At this rate, it will take days to restore my library. Help! There must be a better way!

http://pondini.org/TM/E10.html

I just restored my 13" MBP i5 at the apple store to the newest version of Lion after issues with a previous Time Machine backup from Snow Leopard- this time I created a new account and just ported files and folders, and now MS Office doesn't work. Help?

I just restored my 13" MBP i5 at the apple store to the newest version of Lion after issues with a previous Time Machine backup from Snow Leopard- this time I created a new account and just ported files and folders, and now MS Office doesn't work.
^^ that's the main problem. Here's the full history.
I bought a new 13" i5 MBP, early 2011 edition. I had an old white Macbook 2.14 ghz core2duo on Snow Leopard. I attempted to port over my time machine backup, but encountered problems in that my User was inaccessible from the new computer after the import finished, and I had to go in and change the root password, etc, and for some reason or another, I couldn't install any programs at all from that administrator's account. By "couldn't" I mean I could install them, but upon installation they would never boot. So, I took it to the apple store and did a clean install from the most up to date Lion OSX. Then, I created a brand new admin account, instead of trying to import the old one, and things seemed great. Then, I just imported my old files from the TM backup, but not any system settings, permissions, or user data. Just my Docs, pics, vids, apps, and itunes stuff.
Here's where things get weird again. I imported this stuff under the name "old", but all of these folders have a red negative sign on them, marking them as restricted. So, from my main admin account, I cannot even peruse these folders. Since I didn't import user data, I can't sign in to the "old" account to change permissions. I already tried to change the permissions from system preferences, but that didn't change anything. And now, for whatever reason, of all the apps that were imported then, MS Office is the only set of apps that does not work. When I click on it, it just says there was a problem and asks if I'd like to send a report to apple. I tried reinstalling it to no avail. I'm an English student, so i really need access to Word. Can anyone help? The Apple store is a major detour for me and would like to fix this issue myself.

Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.)

Clean install of Lion. Now I can;t see the partition on a USB external where I did a Time Machine backup. Help?

Howdy.
Ok, wanted to update my daughter's MacBookPro (late 2009 - 2.26ghz - 8GB RAM) I took a new external and partitioned into two GUID partitions. Installed Lion on one, and did a full (and verified) backup on the other. Booted off the external, erased the laptop drive and installed Lion. Works perfectly.
But when I try and access the Time Machine backup, I can't even see the partition. The icon is on the Desktop, the partition is in Finder. When I first instaled it even asked if I wanted to use that partition for Time Machine. But I can't do anything but a full restore, which I obviously do not want.
I tried going into Time Machine itself and when asked if I wanted to "Use Previous Disk" to do TM backups, I said yes. But I could not get the Mac to "inherit" the old backup.
Migration Assistant doesn't see the partition either.
Help?

First I formatted 2 partitions GUID on the external and installed Lion into one of them., and backed up the Macbook (via Time Machine) into the other. I then booted off the external Lion partition, erased the Macbook, installed a fresh Lion.
I then restarted using the new internal Macbook drive. Works perfectly. But now, when I try to use Migration Assistant I cant see the second partition, the one with the Time Machine backup.
I know I can do it manually but actually the computer is with my daughter at college in Arizona and I'm in Connecticut, so I'd rather get to the screen that allows you to restore users and settings only.
Thanks!

Time Machine backup and main drive corrupted. Help! (REWARD OFFERED)

Here's the deal:
I have a Macbook Pro and a Mac Mini both runnign Snow Leopard. I use the Mac Mini as a kind of media center / server, it has a few external drives connected to it. On of these drives (1GB) is dedicated to Time Machine, the Mac Mini (80 GB hard drive) backs up to it directly and the Macbook Pro (500 GB hard drive) does it over the network (Time Machine created a sparsebundle). This has worked well for years now. Occasionally I got the error that Time Machine needed to start a new backup because the old one was corrupt. That happened about 2-3 times a year (did the same thing when I backued up via USB). Now about 2 weeks ago, that error came up and I just let the Macbook Pro on overnight and connected the ethernet cable for faster transfer.
When I woke up, the Macbook Pro didn't respont at all, spinning beachball, no response at all beside mouse movement. I let it do it's thing for another 10 hours (while I was at work) and just held down the power button to power off and restart it. But all I got was the gray-on-gray flashing folder with the question mark in it, that's what you get when the Mac can't find bootable partitions. So I popped in the OSX Snow Leopard install disk, ran disk utility. It saw the hard drive, but no partition (i.e. Machintosh HD) on it. I checked the Time Machine backup and the sparsebundle was 300 GB (the Macbook Pro had 400 GB used, the remaining 100 GB were free). There is no way to restore from an unfinished Time Machine backup...
First thing I did was clone the internal (Macbook Pro) hard drive to a DMG disk image using DiskDrill (the only program I found that could recognize the drive at all, not even DiskWarrior could). I also bought the exact same hard drive model and partitioned it like the cloned the corrupted hard drive to the new one using ddrescue (a command line tool that doesn't quit upon i/o errors but proceeds and tries to recover as much as it can). It copied everything except 65 kilobytes, the corrupted drive seemed to be physically damaged in a bunch of sectors relatively at the beginning of the disk. Since I had now an exact copy on a fresh, healthy drive, I went crazy trying out Disk Warrior (didn't recognize the drive at all), data rescue, testdisc, p a Windows isk, etc. Only R-Studio (on windows) showed the EFI and Macintosh HD partitions on there, they started and ended on the same sectors on the corrupted drive and its clone. After some research, I figured that the partition table was corrupt so I reformated the clone disk using the OSX Snow Leopard install disk (1 HFS Journaled Partition with GUID Partition table). R-Studio showed the EFI and Macintosh HD on that reformated drive, again, same sectors as before. So I figured I could just copy just the bytes where the Macintosh HD starts from the corrupted drive to the clone (using ddrescue). That worked, after almost 24 hours, I had the clone drive with a "disk1" partition on it that even disk utility could see.
Now I was able to run Disk Warrior on it, but all it could do was recover a few Application folders (Resource-Folders and lproj-stuff), about 100 MB in total. It couldn't repair more of catalog file apparently. Luckily, Time Machine backed up quite a bit (300 GB out of 400 GB of data) and I was able to manually copy all the Dokuments, Desktop, user Library, Applications, Music, Download and Movies. Unfortunatley, only a little bit of the Pictures folder was copied. iPhoto library (80 to 100 GB) was nowhere to be found, backup must have failed right then. I can salvage the drives (time machine drive, original hard drive with a few broken sectors, DMG-image of that drive, 1-1 copy of that drive with partition table repaired) but that only gives me files with numeric names and today's date on teh JPEGs (instead of the date the picture was taken).
Is there any way I can recover that iPhoto library? It appears the catalog file got corrupted because the hard drive (only 8 months old...) failed on a few sectors. If I understand it correctly, the catalog file on HFS+ file systems is where the folder structure and file names are stored in a B-Tree. I can't imagine that some i/o error during backup can totally annihilate that file when it was working perfectly before. Here's a few things I want to try out but haven't figured out how so far:
- Time Machine had to start a new backup. There's plenty of free space on that drive so there's a good chance there's old data left on it. Is there a way to restore files (including file names) and fodlers from deleted time machine backups?
- Is there any way to re-build that catalog file from what is there left on the original hard drive? I can't imagine 65 kilobytes destroys it all.
- Are there other ways to recover my iPhoto Library? The raw JPEG (and AVI) files with correct file names or metadata would suffice.
Thanks in advance for any help, I'll actually reward the person with a working solution, 5 years of photo memories are somewhat important. It really ***** that a failure during a backup destroys that...

Final Update:
The catalog file on the original hard drive could not be fixed. Seems like Mac OSX tried to repair the catalog file while the sectors this file resides on failed. To make things worse the partition table was also broken beyond repair, even overwriting the sectors with a new correct partition table didn't help. DiskWarrior found less then 100 MB worth of stuff, mainly Applications folders.
I recovered pretty much everything from the incomplete Time Machine backup by right-clicking the sparsebundle and browsing through the folders with the long alphanumeric names, looking for the version of the folder with the most files in there. All I was missing was part of the ~/Pictures folder, i.e. photobooth pictures and the whole iPhoto Library. My best option was to recover these files using data recovery tools.
DiskDrill proved to be the absolute best, fast, responsive, efficient, and the only one able to mount the DMG-file with no valid file system on it. As there were many i/o errors and broken sectors on the original hard drive, I made a copy of it using a free command line tool called ddrescue (the standard dd tool just aborted when it encountered the i/o error). ddrescue copied the whole drive to a DMG image, I had 56 kilobytes with errors on the first pass, but it managed to shrink that down to just 4 kilobytes (wow!) after the second pass where it tries to re-read the broken secors. It took about 24 hours for a 512 GB 2.5" drive (5400 rpm) but well worth it. Be advised that ddrescue is really persistent and tries everything to recover those last errorneous bytes. At the very end of the process, the read/write head of the hard drive just goes wild trying to catch the data on the sectors with different momentum. This works but I assume this is pretty damaging for the original drive. I also copied it all to a new hard drive (again using ddrescue) and tried partition and catalog repair tools on that (DiskWarrion, testdiks, pdisk, etc.). Still no hint of a good result.
I made a deep scan on the clone hard drive with DiskDrill. At the end (after about 8 hours over USB) it found 13 partition (I assume that's the Macintosh HD, EFI and some DMG files lying around) and hundreds of thousands of pictures. I restored some JPG files just to check the quality, some were damaged, some were good with all the EXIF data intact. I just made it copy all JPG files into a folder. I know the pictures taken from my camera produce JPGs larger than 1 MB and smaller than 5 MB, so I sorted them by size and moved the smaller and larger files into seperate folders. I took the remaining folder (100 GB) and just dragged it into iPhoto. It imported them overnight. Auto-Split by events and I got my library back, alas with different file names, originals and edited versions side by side, lots of duplicates, some damaged, some not. But hey, all the pictures in chronological order. Okay there was also one large event with all the JPGs without valid EXIF data landed inside, iPhoto just takes the file creation date (i.e. the date where the recovered file was copied). As far as I can tell, these are all just data corpses, halfway overwritten copies, random pictures from the internet, desktop pictures, etc.
I started to work my way back through the events, deleting the duplicates and renaming the events. There's an app called "Duplicate Annihilator" which apparently can find duplicate pictures in iPhoto and mark them for you. The free version only does 500 pictures but if it works, I'll get the full version. It can mark th eduplicate photos by adding something to the picture comment in iPhoto so you can manually review it all. Good stuff!

Error message when trying to install mavericks. It won't let me select a disk to install Mavericks on. Message says "This disk is used to Time Machine backups." It is NOT used for back ups. help

When trying to chose a disk on which to install mavericks I get a message that says "this disk is used for Time Machine backups" and cannot be used. Help!

I don't know what will help at this point. You should never update a system that has problems, unless you're absolutely sure that the problems are caused by a bug that is fixed in the update. With your backups in an uncertain state, you should not update or do anything else except start a new backup.

Concerns ALL Time Machine Users. HOW TO MOVE Time Machine backups. Help !

Concerns ALL Time Machine Users :
MOVE (or COPY) Time Machine backups from a "x"To Disk to an "y"To greater disk.
Hello and thank you all for reading me,
First, excuse me if I make language errors (I'm French).
Secundo, I don't know if you'll find something interesting for you
in what I write about Time Machine and my own problems,
but there's a possibility also that YOU could perhaps help me.
I'm talking about Time Machine and his **** Backups.backupdb folder,
containing "*Name of your Mac*" folder,
this folder containing Time Machine backups, format : YYYY-MM-DD-HHMMSS
Time Machine doesn't recognize the backups it made *IF YOU MOVE THEM*.
I have perhaps a solution in this message.
You'll see below what kind of problem I (and you could) have.
Since 12/01/10, an Apple Adviser Level Two (and me)
are trying to understand how to move backups from TM1To Disk to, let's say, a bigger one.
My case is TM1,5To.
*Purpose :* Move 19 backups from Time Machine X disk to Time Machine Y disk.
Delete TMX disk Time Machine backups after that.
Make TMY disk the current used Time Machine Disk.
I don't remember exactly what we did before
(we even created a "root" account with password (dangerous to do),
but it didn't solve the problem),
but we finally copied :
TM1To > Backups.backupdb > *MacBook Pro* folder (containing 19 backups) into :
TM1,5To > Backups.backupdb folder.
The Copy application announced *16 hours !* (without antivirus, to remove absolutely).
So I said goodbye and thank you to my Apple Adviser. After *8 hours*, Copy failed.
BUT it had succeeded to copy *4 backups ONLY* (why ?) in TM1,5To.
I immediately verified and checked each of these with Get Info.
They had EXACTLY the same size (Byte to Byte) as in TM1To.
➔ BUT HERE IS MY OBSERVATION :
After designing TM1,5To as Time Machine Disk, I ordered it to Backup (now).
And what did Time Machine do in TM1,5To > Backups.backupdb ?
It created a *NEW folder*, named *MacBook Pro 2* !
➔ *I HAVE NO ACCESS* to TM1,5To > Backups.backupdb > *MacBook Pro* (4 backups copied from TM1To, remember) ;
➔ while I still *HAVE ACCESS* to TM1To > Backups.backupdb > *MacBook Pro* (19 backups) ;
➔ *AND I HAVE ACCESS* to TM1,5To > Backups.backupdb > *MacBook Pro 2*,
where Time Machine makes actually his backups.
*NOTE :* If you *change the name* of your computer,
Time Machine *changes automatically the name* of the folder who is in Backups.backupdb folder.
➔ ① I have *never seen* such protections (Sharing and Permissions).
You are not allowed to do anything. I've tried to change permissions,
first : "R+W", after that : "Make (Me) the owner", I can tell you : DON'T DO IT !
➔ ② It's impossible to install an OS on a Time Machine disk
(I thought it would allow better permissions).
OS Installer detects the existence of a Backups.backupdb folder
and refuses to install on this disk or partition.
I have now the bad intent to install minimal OS X
1) after deleting (how ?) this folder (but not its contents, how to move it ?)
and 2) declare *after that* the disk as Time Machine disk.
➔ ③ Time Machine doesn't backup OTHER Time Machine backups
(who are in an ancient-not-choosed-for-backups Time Machine disk) NOR backups this disk
(detects, once again, the existence of a Backups.backupdb folder).
AND you can't *absolutely not remove backups from the folder the're in*
(for me, *MacBook Pro* or *MacBook Pro 2*).
➔ ④ I didn't have time to do it, but I think there would perhaps be a solution
in restoring backups in partitions specially created to receive them (having the same name,
that sort of thing) and then re-backup these partitions (vicious and complicated).
There is a function on Mac OS X Install DVD : start with it, and then (do not install)
choose "*restore from Time Machine backup*" from the menu bar (it's called "Utilities", I believe).
➔ ⑤ I *absolutely don't understand* what follows :
— If I add (in my TM1To disk) the bytes of the 19 backups
in Backups.backupdb > *MacBook Pro* folder, I obtain about *1,8 To*.
— It's impossible (and not french).
— When I check the size used with Disk Utility (NOT with Get Info),
I find a correct (?) size : *about 750 Go*.
— What are Time Machine backups made of ?
It can't be aliases (because of their size, and because *aliases suppose originals,
and where could they be ?*), or am I wrong and becoming crazy ?
➔ ⑥ If you refer to the numbers shown at the end of this text (*4 backups*),
you'll see I could *delete duplicate elements* inside these 4 backups,
to win space (but *what kind* of space *if I delete aliases* ?).
Back-In-Time (see below) says he does it.
BUT is it really the OLDEST items I have to destroy (see ⑤),
when I don't know with what kind of ARTEFACT I'm acting ?
What does Time Machine delete to create more backup space ?
Is it REALLY the OLDEST backups it treats, or duplicates, OR ?
*What you can do :*
Find and go to Tri-Edre.fr or Tri-Edre.com/fr site (it's a french company
that creates small Mac applications since fifteen years at least,
I think I already bought them several programs in 1990) ;
Their program *Back-In-Time 1.4.4* is free (Trial) and complete to download (with PDF docs too).
It is *ENTIRELY DEDICATED* to Time Machine and *things you can't do* with.
Price is about 30 €, I think it's worth.
The TRIAL version you will obtain can only work on the LAST Time Machine backup,
but you will see what's featured *AND :*
You will ACCESS to ANY Time Machine backup you want
(It has to be the last of a serie of backups, but the serie you want.
I've bought the application and own an activation key, but you understand I can't give it to you
(it would not be ethic) and anyway you would be obliged to disconnect AirPort, Ethernet etc.
•➔ I have bought the application because I thought (it's said in PDF FAQs) I could IN THE END move Time Machine backup files, but it cannot, (I'm afraid).
*BUT ANY ACCESS PROBLEM IS SOLVED.*
•➔ Back-In-Time 1.4.4 can *delete :* duplicate backups, complete backups,
or duplicate items inside one or several Time Machine backups,
things that I believe impossible with Time Machine itself
(I've seen it offers to delete ALL occurences of an item) ;
•➔ The application can also restore anything you want, where you want
(but I think Time Machine does it too ?)
•➔ Believe it or not, but since I've bought it on 15/01,
I've only worked about 2 hours (no, much more) on it
and didn't make sufficient progresses (enhancements ?)
to talk of it with sufficient experience (I'm a bad guy, don't you think ?)
•➔ Tri-Edre offers on-line support, e-mail support (and so on),
and I EVEN didn't manage to join them, because I did many other things,
and also somewhat have been disgusted *not to be able to move* or copy
*(accessible by Time Machine after that)* backups,
and I also didn't succeed (*another Time Machine inconvenient*) to DESTROY an ".inProgress"
Time Machine (package) which doesn't work anymore (several interruptions while active),
date (and name) 2010-01-27-164345.inProgress, but is used (*with failure results*)
by Time Machine (it's turned off till I find how to destroy its **** ".inProgress" package.
•➔ I've asked my Apple Adviser Level 2 to wait for news from me
before working himself on the problem, and I think I will send him this message
to prove I haven't forgotten him.
•➔ I'll send it to Tri-Edre too, in the same move.
I hope those remarks to be useful for somebody, tell me if it has helped.
I will also publish this in any Time Machine topics I find here, and in MacRumors site too.
As you can see, I need help too … Does anybody have an idea ?
Perhaps if I used a specific Copy software, it could work ?
You'll see below an example of some time I've spent to study my problem
(you will think I'm crazy).
With my kind regards, and good luck if you have other Time Machine problems !
Olivier Herrbach
<Edited by Host>
Le but du jeu est de transférer toutes les sauvegardes Time Machine
d'un volume/partition que nous appelerons "1 To"
sur un volume/partition que nous appelerons "1,5 To".
*Je rappelle que les 4 sauvegardes effectuées par Time Machine sur le 1 To
n'ont pas été reconnues comme siennes par Time Machine sur le 1,5 To,
bien que strictement identiques en taille après leur copie.
J'ai remarqué dans Back-In-Time des fichiers invisibles (tels que "TimeMachine.log"
ou quelque chose de genre), et je soupçonne fort qu'ils n'ont pas été copiés et que Time Machine,
ne les trouvant pas dans le 1,5 To, a ignoré à cause de leur absence les 4 sauvegardes décrites ici.*
*Sauvegardes effectuées par Time Machine sur 1 To :*
Path : MacBook Pro > Volumes > 1 To > Backups.backupdb > MacBook Pro
MacBook Pro contient 19 items (dont un alias appelé "Latest") :
1°) 2010-01-02-045758 Size : 913.207 B for 41.888 items comprenant :
• Hitachi 1 To Size : 907.664 B for 41.887 items 7 folders
Différence avec 1°) = - 5.543 B - 1 item (1 folder)
2°) 2010-01-03-001957 Size : 982.211.325 B for 67.490 items comprenant :
• Hitachi 1 To Size : 901.516 B for 41.886 items 6 folders
Différence avec 1°) = - 6.148 B - 1 item - 1 folder
• Samsung 500 Go Size : 981.302.510 B for 25.602 items 4 folders
Total • + • = Size : 982.204.026 B for 67.488 items
Différence avec 2°) = -7.209 B - 2 items (2 folders)
— *Supprimer • Hitachi 1 To* dans 2010-01-03-001957. Comparer les dossiers.
3°) 2010-01-04-222709 Size : 5.241.032.819 B for 26.509 items comprenant :
• Samsung 500 Go Size : 5.187.330.874 B for 19.392 items 8 folders
Différence avec 2°) = + 4.206.028.364 B - 6.210 items + 4 folders
• StartUp Disk Size : 53.692.703 B for 7.115 items 4 folders
Total • + • = Size : 5.241.023.577 B for 26.507 items
Différence avec 3°) = - 9.242 B - 2 items (2 folders)
— *Supprimer Samsung 500 Go* dans 2010-01-03-001957. Comparer les dossiers.
4°) 2010-01-05-125449 Size : 9.428.705.396 B for 204.915 items comprenant :
• HD 250 Go Size : 9.374.308.265 B for 181.575 items 7 folders
• Samsung 500 Go Size : 692.898 B for 16.222 items 8 folders
Différence avec 3°) = - 5.186.637.976 B - 3.170 items
• StartUp Disk Size : 53.692.703 B for 7.115 items 4 folders
Total • + • + • = Size : 9.428.693.866 B 204.912 items
Différence avec 4°) = - 11.530 B - 3 items (3 folders)
— Supprimer • StartUp Disk dans 2010-01-04-222709. IDENTIQUE.

Dear James Pond,
Thank you once again, and, don't be afraid, I will be as short as possible,
but I need to use your last reply (I've cut all what was already said).
JP ➔ You can copy an entire set of backups, but you cannot copy part of it successfully. See #18 etc.
JP ➔ Read this from the first paragraph: "you cannot copy only selected backups,
or merge two (or more) sets of backups." The structure of the backups simply will not allow it.
I've read it, and found it regrettable. And I've also read, after that, what were the solutions under Leopard and Snow Leopard, and my conclusion is that it's a *dead end* for me. In short,
— I can't move (by drag and drop) the 1To's Backups.backupdb folder (containing MacBook Pro, 19 backups, access) to 1,5To, because there exists already the Backups.backupdb folder created by copy on 12/01 with Apple Assistance (containing [MacBook Pro, 4 backups of 19, no access] and [MacBook Pro 2, 15 backups, access]). I don't even know if it could be deleted by the copy (and I don't wanna do that anyway) ;
— I can't rename (and what for, I already forgot it) any Backups.backupdb folder nor delete it ;
— I can't copy any Computer'sName folder (entire set containing backups), being in a Backups.backup.db folder, into another Backups.backupdb folder ;
— I can't copy any (or all of an entire set) YYYY-MM-DD-HHMMSS backup(s), being in a Computer'sName folder, into another Computer'sName folder (even if it would be empty).
— Saying NONE in Time Machine Preferences and putting it to OFF is simply no use.
All is said. What I can try to do is :
— Delete (not with Finder, but with Back-In-Time) all duplicate things I find in all backups and also entire duplicate backups (I have full access to all with the software) ;
— Restore each of the reduced-to-minimum backups obtained in specially right-sized partitions wearing the YYYY-MM-DD-HHMMSS name of each restored backup. Time Machine doesn't backup his backups, but will backup these partitions.
I'm afraid to be actually completely running out of the target, when I read what I write … It's time to go to bed !
Reminder (OH) : Where did you find these amazing informations ?
JP➔ Some of it is detailed here: http://www.appleinsider.com/articles/07/10/12/roadto_maco[]sx_leopard_timemachine.html
➤ Thank you ;
JP➔ and here:
http://arstechnica.com/apple/reviews/2007/10/mac-os-x-10-5.ars/14
➤ Thank you too ;
JP➔ You have to understand the structure. When TM does the first backup, yes, it copies everything.
On subsequent backups, it copies what's new or changed, but also makes "hard links" (sort of like aliases) to the copies of the things that didn't change. That's how it can only back up a few things each time, but show you a complete "snapshot" of the way your entire system looked at the time of every backup.
➤ I'll do my best to understand.
JP➔ Time Machine deletes backups under two conditions. See the first part of #12 in the Frequently Asked Questions User Tip, also at the top of this forum.
Under normal circumstances, you should not have to delete any backups. See the rest of #12.
➤ I understood why Time Machine didn't delete oldest backups : they were not weeklies ones.
Reminder (OH) : How can I destroy the (corrupted ?) not working "2010-01-27-164345.inProgress" in 1,5 To, which causes Time Machine to abort any backup of any size I ask ?
JP➔ Why do you think it's corrupted? TM is designed to "recover" a partial backup.
➤ I'll verify that with the little Tools/Apps I discovered in your FAQ User Tip document and downloaded immediately.
Why didn't Apple tell me anything ? It's my fault, I'm perhaps not clear and not demanding enough more from them.
JP➔ You cannot install OSX on a disk containing TM backups. That's because they need to be on separate disks.
Technically, you could put them on separate partitions of the same disk, but that would not be a good idea.
➤ I never told you that (there would be no interest at all). I talked about the same location, to see if it would allow me more permissions, but if all works without doing it, it's really no use.
JP➔ Sorry, I don't know what that means.
➤ I'm sorry, I didn't explain : "but if all works" meant : Copy Backups.backupdb, "without doing it" meant : Install OSX.
➤ If I install an OSX BEFORE, Time Machine will REFUSE completely to backup on it, it's understood.
JP➔ Correct. The partition you're running from will not be an option in TM Preferences > Select Disk. That prevents TM from backing-up it's own backups!
➤ Would it be so absurd ? Maybe it could resolve my actual problem ?
I think you are right, but I don't know why. I trust you.
Reminder (OH) : "I will not bore you again except if I don't find a specific answer to an unknown-never-seen-incredible malfuction."
JP➔ Don't worry about that -- thats what this forum is for, especially if you're still having problems.
➤ It's seems in fact that there is no possible solution, except what I said above and is certainly crazy/out of subject.
Just try to be as clear and concise as you can.
And please don't post the same things repeatedly -- it wastes your time and ours, and can confuse other folks.
➤ You're absolutely right and I tried to do so this time, and I'm sorry because I see it's still (far) not enough (short).
Thank you once more. I wish you a good evening and week-end. Here it's 01:40 AM.
With my kind regards
Olivier Herrbach
[email protected]

Unable to restore from Time Machine after an erase and reinstall - MacbookPro cannot access my old Time Machine backup volume. Desperate for help please?

My MacbookPro would not move past the Apple logo and spinning wheel for a number of hours. After trying the numerous suggestions to solve the issue I eventually opted to erase and reinstall feeling confident my Time Machine backups would come to the rescue. After a successful erase and reinstall I tried to restore all my data from my TIme Capsule using Command-R during start up and by using the Migration Assistant. Neither worked and I have received messages to the effect that the backup volumes on my Time Capsule cannot be access because I have entered a wrong password or because the backup volume is damaged.
When I open my Time Capsule in Finder and click on my sparsebundle I get an eror message saying that the disk image could not be opened and that the resource is temporarily unavailable.
Desperate for some help and comfort that many years of personal data have not been lost.
Thank you.
M

When I try to Verify option it says Unable to Verify - Resource temporarily unavailable.
Here is the past of the log screen:
2013-06-09 15:00:00 -0500: Disk Utility started.
2013-06-09 15:09:01 -0500: Disk Utility started.
2013-06-09 15:19:53 -0500: [DUDiskController viewablePartitions] expecting DUDisk, but got nil
2013-06-09 15:19:53 -0500:
2013-06-09 15:20:00 -0500: [DUDiskController viewablePartitions] expecting DUDisk, but got nil
2013-06-09 15:20:00 -0500:
2013-06-09 15:20:05 -0500: [DUDiskController viewablePartitions] expecting DUDisk, but got nil
2013-06-09 15:20:05 -0500:
2013-06-09 15:20:13 -0500: Verifying Image “Macajee’s MacBook Pro”
2013-06-09 15:20:14 -0500: Unable to verify “Macajee’s MacBook Pro.” (Resource temporarily unavailable)
2013-06-09 15:20:14 -0500:
2013-06-09 15:25:21 -0500: Verifying Image “Macajee’s MacBook Pro”
2013-06-09 15:25:23 -0500: Unable to verify “Macajee’s MacBook Pro.” (Resource temporarily unavailable)
2013-06-09 15:25:23 -0500:
2013-06-09 15:25:27 -0500: Attach Image “Macajee’s MacBook Pro”
2013-06-09 15:25:27 -0500: Initializing…
2013-06-09 15:25:31 -0500: Attaching…
2013-06-09 15:25:31 -0500: Finishing…
2013-06-09 15:25:32 -0500: Unable to attach “Macajee’s MacBook Pro.” (Resource temporarily unavailable)
2013-06-09 15:25:32 -0500:
2013-06-09 20:02:06 -0500: Disk Utility started.
2013-06-09 20:05:22 -0500: Disk Utility started.
2013-06-09 20:07:11 -0500: Disk Utility started.
2013-06-09 20:18:34 -0500: [DUDiskController viewablePartitions] expecting DUDisk, but got nil
2013-06-09 20:18:34 -0500:
2013-06-09 20:19:34 -0500: [DUDiskController viewablePartitions] expecting DUDisk, but got nil
2013-06-09 20:19:34 -0500:
2013-06-09 20:19:36 -0500: [DUDiskController viewablePartitions] expecting DUDisk, but got nil
2013-06-09 20:19:36 -0500:
2013-06-09 20:22:29 -0500: [DUDiskController viewablePartitions] expecting DUDisk, but got nil
2013-06-09 20:22:29 -0500:
2013-06-09 20:22:33 -0500: [DUDiskController viewablePartitions] expecting DUDisk, but got nil
2013-06-09 20:22:33 -0500:
2013-06-09 20:22:45 -0500: Verifying Image “Macajee’s MacBook Pro”
2013-06-09 20:22:45 -0500: Unable to verify “Macajee’s MacBook Pro.” (Resource temporarily unavailable)
2013-06-09 20:22:45 -0500:
2013-06-09 20:34:53 -0500: [DUDiskController viewablePartitions] expecting DUDisk, but got nil
2013-06-09 20:34:53 -0500:
2013-06-09 20:34:56 -0500: [DUDiskController viewablePartitions] expecting DUDisk, but got nil
2013-06-09 20:34:56 -0500:
2013-06-09 20:38:17 -0500: Verifying Image “Macajee’s MacBook Pro”
2013-06-09 20:38:17 -0500: Unable to verify “Macajee’s MacBook Pro.” (Resource temporarily unavailable)
2013-06-09 20:38:17 -0500:
2013-06-09 20:47:35 -0500: Disk Utility started.
2013-06-09 20:53:06 -0500: Disk Utility started.
2013-06-09 20:55:30 -0500: Disk Utility started.
2013-06-09 20:56:40 -0500: Disk Utility started.
2013-06-09 21:06:32 -0500: Verifying Image “macajee’s MacBook Pro”
2013-06-09 21:06:32 -0500: Unable to verify “macajee’s MacBook Pro.” (Resource temporarily unavailable)
2013-06-09 21:06:32 -0500:
2013-06-09 21:07:08 -0500: Verifying Image “macajee’s MacBook Pro”
2013-06-09 21:07:08 -0500: Unable to verify “macajee’s MacBook Pro.” (Resource temporarily unavailable)
2013-06-09 21:07:08 -0500:

I had to reformat my OSX 10.5.8 and i can't restore my emails from my time machine backup from an external hard drive - only the latest (post backup) time machine back ups are available to restore. Please can any help

I had to reformat my OSX 10.5.8 and I can't restore my emails from my time machine backup from an external hard drive - only the latest (post backup) time machine back ups are available to restore. Please can any help? I can find the mail folder in my libraries, but the Restore Button is grayed out

OSX treats the reformatted drive as a different one; it's the same as replacing it, and the old one is no longer connected.
See #E3 in Time Machine - Troubleshooting to see and restore from the "old" drive.
And, you may not want to restore via the Finder; see the blue box in #15 of Time Machine - Frequently Asked Questions.

Verbatim disk drive historically used only for time machine backups. Recently i added some other media files to use some of available space without partitioning, the disc now refuses to mount in finder despite appearing in disk utility. Repair fails. HELP

Sorry to elaborate a bit more.
I have used time machine since owning my mac book pro with no issues. i keep the timemachine backups on an external hard drive made by Verbatim. This has not external power source.
Recently i decided to use up some of the available space on the external verbatim disk drive to store some movie files which were sitting on my macbook pro.
Therefore i created a new folder outside of the time machine backup folder and stored the movie files in there.
From then on Time machine failed... and a few days later i noticed it was not mounting in 'finder'
Therefore i used disk utility to see if it was recognising it. Which i was. However when i try to repair it the repair process fails.
In disk utility i am presented with 1 TB Samsung HN M10 which has a child called Verbatim HD.
The 1TB Samsung hardware appears fine, but the verbatim disk i am unable to fully verify and fix.
Does this mean i have lost all my back ups?
Have I lost all the media that i put on there?
Is there any way to fix this?
Any help would be appreciated.
didier07...

To summarize: You used an external Verbatim HD for your TM backups. Then, you stored some movie files on the "spare" space on the Verbatim drive. Now, Disk Utility isn't being recognized, and repair is disabled. Your home Samsung drive is working fine, but the Verbatim cannot be verified.
The problem, I believe, is that the external Verbatim drive wasn't partitioned. There should be two partitions: one for TM backups, the other for video. That way, you can perform backups, and still retain some space for video or somesuch.
Frankly, I don't know how to fix this except through the following. (1) Erase the Verbatim drive, (2) Create a new blank space and format it, (3) Make two partitions - one for backup, the other for video. (4) Run TM through one partition, but switch to the other for your videos. The better solution might be to have one dedicated drive (perhaps the Verbatim) for backups, and another dedicated drive for video backups; that way, you'll have plenty of space for expansion.
I hope someone will correct me if I'm incorrect, but I believe you've essentially lost your backups and media. I don't know how you can retrieve that clump of the now-undifferentiated data on the Verbatim drive. To retrieve any lost data, you're going to require another external drive that's larger in capacity, as well as data recovery software; don't expect encouraging results. If you're desperate, there are firms like Drive Savers that can offer a more comprehensive solution - at a cost.
Post if you have questions, or additional concerns!

I cannot able able to start my macbook and then i started my mac in a recovery mode now mac os X utility window opens with 4 options 1. Restore From Time Machine Backup 2. Reinstall Mac OSX 3. Get Help Online 4. Disk Utility if i try to restore my mac wit

i cannot able able to start my macbook and then i started my mac in a recovery mode now mac os X utility window opens with 4 options 1. Restore From Time Machine Backup 2. Reinstall Mac OSX 3. Get Help Online 4. Disk Utility if i try to restore my mac with time machine no option appears if i reinstall from Mac OSX error comes and cannot able to recover from disk utility please help how can i reinstall mac OSX

Guitar21,
your MacBook Pro has booted into its Recovery mode. From the OS X Utilities menu, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Does it get to the login screen now?

Time Machine Backup Not Working - Please Help!

Hey everyone - first post here, please help! I'm having trouble with TM. Here are the messages from Time Machine Buddy:
Starting automatic backup
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Forcing deep traversal on source: "Macintosh HD" (mount: '/' fsUUID: AD5C219F-0EC8-32C3-B827-2FF171A4AE46 eventDBUUID: 68A67596-22DD-4FB5-AA49-390E857688E1)
Backup content size: 166.93 GB excluded items size: 34.36 GB for volume Macintosh HD
Found 842174 files (132.56 GB) needing backup
160.14 GB required (including padding), 824.43 GB available
Copied 74.41 GB of 132.56 GB, 693114 of 842174 items
Copied 130.6 GB of 132.56 GB, 728437 of 842174 items
Copied 731588 files (130.76 GB) from volume Macintosh HD.
Backup canceled.
Starting manual backup
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Forcing deep traversal on source: "Macintosh HD" (mount: '/' fsUUID: AD5C219F-0EC8-32C3-B827-2FF171A4AE46 eventDBUUID: 68A67596-22DD-4FB5-AA49-390E857688E1)
Didn't get valid migration dates.
Found 842174 files (1.87 GB) needing backup
3.9 GB required (including padding), 692.16 GB available
Copied 85694 files (1.71 GB) from volume Macintosh HD.
Using file event preflight for Macintosh HD
Will copy (41.8 MB) from Macintosh HD
Found 430 files (42.2 MB) needing backup
2.23 GB required (including padding), 689.79 GB available
Copied 5022 files (46 MB) from volume Macintosh HD.
Created new backup: 2012-10-09-015038
Copying OS X Recovery set
Starting post-backup thinning
Error: Error Domain=NSOSStatusErrorDomain Code=-50 "The operation couldn’t be completed. (OSStatus error -50.)" (paramErr: error in user parameter list) deleting backup: /Volumes/Time Machine Back
I tried to back it up the first time, and it was taking forever, so I stopped it, and then started a new backup. Can someone let me know what to do so I can be comfortable knowing the machine is definitely backed up?
Thanks!

The indication that the backup completed successfully is the best evidence that it did. If you want something more explicit, you can proceed as below.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Drag or copy — do not type — the following line into the Terminal window, then press return:
sudo tmutil compare
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
The command will take at least a few minutes to run. Eventually some lines of output will appear below what you entered.
Each line that begins with a plus sign (“+”) represents a file that has been added to the source volume since the last snapshot was taken. These files have not been backed up yet.
Each line that begins with an exclamation point (“!”) represents a file that has changed on the source volume. These files have been backed up, but not in their present state.
Each line that begins with a minus sign (“-“) represents a file that has been removed from the source volume.
Files that you’ve excluded from backup, or that are excluded automatically, are ignored.
At the end of the output, you’ll get some lines like the following:
Added:
Removed:
Changed:
These lines show the total amount of data added, removed, or changed on the source(s) since the last snapshot.

Time Machine Backup - HELP!

Similar Messages

Maybe you are looking for