Time machine backup illegal name

Hi there, I've just finished setting up a new time machine backup and moving other files to my external hard drive but today i plugged it in and it wouldn't mount. I opened Disk Utility and tried to mount and repair disk but nothing has happened, all i get is errors saying illegal name and that it is unable to be repaired. I've seen that this can sometimes be caused by some adobe software but I have none installed or on that disk. I have also tried repairing it with DiskWarrior but all the options are greyed out. Here is the error by Disk Utility i get now:
Verify and Repair volume “Time Machine Backups”
Volume repair complete.
Updating boot support partitions for the volume as required.
Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
The first time i tried repairing i got two illegal name errors. The disk still mounts in under Windows 7 but i don't want to use that.
Any suggestions?
I am running Snow Leopard 10.6.8 on my MacBook

DiskWarrior ended up working and I rebuilt the directory

Similar Messages

I changed the name of my imac to reflect it's new location, but inadvertently, it unchecked the box to allow the administrative user account to administer the machine. I am trying to reinstall with a time machine backup and am unable

I need a little help. I changed the name of my imac to reflect it's new location, but inadvertently, when I saved the change, the system unchecked the "allow this account to administer the computer" so now I can't make any changes.... I tried to reinstall the OS, but it wants me to go online while installing and use my apple id, but this is not my iMAC, so I don't want to use my account. Also, I am working in a building that will not allow me network access until I authenticate, which can't be done unless I open the browser first. So I'm stuck at this point. I can't even restore a time machine backup that I have because it gives the error message that the system encountered an error. Any suggestions?

Ask the admin/owner to sign in.

Due to NAS issues, when I started a new time machine backup it did not have the old backups available. My question is do I need to delete them or will time machine automatically reclaim the space? Only one Sparse Bundle, same name.

Due to NAS issues, when I started a new time machine backup it did not have the old backups available. My question is do I need to delete them or will time machine automatically reclaim the space? There is only one sparse bundle but when I enter time machine I don't see my historic backups. I use a synology DS212 for my time machine. Started a new backup which is 218gb but it says 618 gb is occupied therefore it looks like 2 or 3 backups are still on the disk. Before my NAS issues the last backup was in 2014. As you can see there is a second sparse bundle from 2012. Not sure what that is.

This is an old message now, but what happened to me similarly was:
I had a major computer crash and through complicated pathways ended up reinstalling (Mavericks) as a new user (long story).
At least I had good Time Machine backups on an NAS drive (Synology DS212j), or so I thought - when I started Time Machine up again, the old backup file was gone, replaced by a new one using my "new computer" name. The old file was gone both by directly mounting the NAS drive and by clicking "Enter Time Machine".
It's like I had {OldShareName}.sparsebundle and then it was replaced by {NewShareName}.sparsebundle, all of the old info vanished.
(I have spent a week finding old files elsewhere and have completed a satisfactory self-restore. It pays to "archive" [my own variation of] as well as "back-up".)
My belief is that if this were a wired-netword-drive, e.g. plugged right into my iMac with a USB cable, then the old file would have remained.
But this is an NAS drive, connected directly to my Airport wireless router, and I don't know the significance of the fact that it stores its Time Machine backups as "sparsebundle" files rather than simply as plain(er) files.
As usual when things get complicated with computers (not just Apple computers) there was never a warning message. Something like "YOU'RE ABOUT TO DELETE A TIME MACHINE BACK-UP FILE!!!" would have made my life a lot simpler.
BTW, I did try a "restore from Time Machine" option the first thing I had my "new computer" (old hardware, 2009 iMac) up and running, using Migration Assistant, and it ran for many hours and then failed in the wee hours - what that has to do with anything I'm not sure.
I'm not sure that I have a question about this other than "why do these things happen to me?", but it's a warning. Apart from that I've been very happy with the stability and reliability (but not the cost or set-up complexity) of NAS vs. directly-cabled external drives.
Charles

Time Machine backup disk changed name to "3-/9=/=87"

I upgraded to Leopard, and attached a LaCie drive, which Time Machine recognized and used as its backup disk. After formatting the drive, the name was changed to Time Machine Backup disk, but now it has changed to 3-/9=/=87. I tested Time Machine to ensure that it is indeed restoring files, and it is. Any ideas on the name change, and if it will affect Time Machine?
Many thanks.

My solution
I found that after trying a few things in the aforementioned thread that in System Preferences > Sharing > Options if I disabled SMB and only enabled AFP on my Mac Pro, which has my Time Machine disk and is accessed over my local network LAN by my Macbook Pro laptop, only then did the Time Machine disk show up in the Time Machine preferences in my remote laptop TM settings.
I suspect my laptop had been connecting to my desktop via SMB instead of AFP and thusly TM would not work.

After replacing a failed hard drive with new one I inadvertently created a different account name(home/user) than the one in the Time Machine backup. Now I cannot restore the photos in iPhoto. What are my options?

After replacing a failed hard drive with new one I inadvertently created a different account name(home/user) than the one in the Time Machine backup. Now I cannot restore the photos in iPhoto. What are my options?

The best thing to do would be to start over. Use Setup Assistant this time.
Boot into Recovery, launch Disk Utility, and erase the startup volume. This operation will destroy all data on the volume. Quit Disk Utility and install OS X. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
When you reboot, you'll be prompted to go through the initial setup process. That’s when you transfer the data from one of your backups. For a walkthrough, see here:
Using Setup Assistant
Don't transfer the Guest account, if it was enabled on the old system.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.

AEBS, device name, and Time Machine backups, question

Will changing the device name of my AEBS (what shows up, for example, in a Finder window sidebar, affect time machine backups that live on a an AirDisk? I just want to make sure, before I make any changes, that my computers won't 'lose' the existing backups if I do change the device name.

I'm afraid to try it, but that is what I am not clear about. The Drive name isn't changing, just the AEBS device name. The big question is does TM just care about the drive name, or does it also care about the AEBS device name. If you are right, than I am out of luck. But would love someone to definitely confirm.

If I change the name of my internal Hard drive how will it affects my time machine backup

Hi can anyone tell me the answer to this please?
My mates Hard drive is called Ian's HD and he wants to change it to My HD will it affect the Time Machine backup?

Thanks so much.
That's what I thought but it's always best to get a second opinion.

I want a new and more powerful (non-Apple) wireless router but I still want to use my existing Time Capsule to continue with my Time Machine backups and I still need the Time Capsule's Network Attached Storage (NAS) features and capabilities

THE SHORTER STORY
My goal is to successfully use my existing Time Capsule (TC) with a new and more powerful wireless router. I need a new and more powerful wireless router in order to reach a distant Denon a/v receiver that is physically located in a master bedroom some 50 feet away from my modem. I need to provide this Denon a/v receiver with an Internet connection so that it can obtain its firmware updates and I need to connect this Denon a/v receiver to my network in order to use its AirPlay feature. I believe l still need the TC's Network Attached Storage (NAS) features because I am not sure if the new wireless router will provide me with the NAS like features / capabilities I need to share files between my two Apple laptops with OS X 10.8.2. And I know that I absolutely need my TC's seamless integration with Apple's Time Machine (TM) application in order to continue to make effortless backups of my two Apple laptops. To my knowledge nothing works with TM like Apple's TC. I also need the hard disk storage space built into the TC.
I cannot use a long wired Ethernet cable connection in this apartment and I cannot use power-line adapters. I have read that wireless range extenders and repeaters are difficult to successfully set-up and that they will reduce data speeds, especially so when incorrectly set-up. I cannot relocate my modem and/or primary base station wireless router.
In short, I want to use my TC with my new and more powerful wireless router. I need to stop using the TC to connect to the modem. However, I still need the TC for seamless TM backups. I also need to use the TC's built in hard drive for storage. And I may still need the TC's NAS capabilities to share files wirelessly between laptops because I am assuming the new wireless router will not provide NAS capabilities for OS X 10.8.2 (products like this/non-Apple products rarely seem to work with OS X 10.8.2/Macs to provide NAS features and capabilities). Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone please advise on how to set-up my new Asus wireless router with my existing TC in such a way to accomplish all of this?
What is the best configuration or set-up to accomplish my above goals?
Thank you in advance for your assistance!!!
THE FULL STORY
I live in an apartment building where my existing Time Capsule (TC) is located in my living room and serves many purposes. Specially, my TC is at least all of the following:
(1) Wi-Fi router connected to Comcast Internet service via Motorola SB6121 cable modem - currently the TC is the Wi-Fi base station that connects to the modem and has the gateway address to the Internet. The TC now provides the DHCP service for the Wi-Fi network.
(2) Wireless router providing Internet and Wi-Fi network access to several Wi-Fi clients - two Apple laptop computers, an iPod touch, an iPad and an iPhone all connect wirelessly to the Internet via the TC.
(3) Wired Ethernet router providing Internet and Wi-Fi network access to three different devices - a Panasonic TV, LG Blu-Ray player and an Apple TV each use one of the three LAN ports on the back of the TC to gain access to the Internet.
(4) Primary base station in my attempt to extend my wireless network to a distant (located far away) Denon a/v receiver requiring a wired Ethernet connection - In addition to the TC, which is my primary base station, I am also using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. I cannot use a wired Ethernet connection to continuously travel from the living room to the master bedroom. The distance is too great as I cannot effectively hide the Ethernet cable in this apartment.
(5) Time Machine (TM) backup facilitator - I use my TC to wirelessly back-up two Apple laptops using Apple's Time Machine (TM) application. However, I ran out of storage space on my TC and therefore added external storage to it. Specifically, I added an external hard drive to my TC via the USB port on the back of the TC. I now use this added external hard drive connected to the TC via USB as the destination storage drive for my TM back-ups. I have partitioned the added external hard drive, and each of the several partitions all have enough storage space (e.g., each of the two partitions used by TM are sized at three times the hard drive space of each laptop, etc.). Everything works flawlessly.
(6) Network Attached Storage (NAS) - In addition to using the TC's Network Attached Storage (NAS) capabilities to wirelessly back-up two Apple laptops via TM, I also store other additional files on both (A) the hard drive built into the TC and (B) the additional external hard drive connected to the TC via USB (there are additional separate partitions on this drive for these other additional and non-TM backup files).
I use the TC's NAS feature with my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Again, everything works wirelessly and flawlessly. (Note: the Apple TV is connected to the network via Ethernet and a LAN port on the back of the TC).
The issue I am having is when I try to listen to music via Apple's AirPlay in the master bedroom. This master bedroom is located at a distance of two rooms away from the TC's current location in the living room, which is a distance of about 50 feet. This apartment has a long rectangular floor plan where each room is connected to the next in a straight line. In order to use AirPlay in the master bedroom I am using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. This additional base station connects wirelessly to the WiFi network provided by my TC and then gives my Denon receiver the wired Ethernet connection it needs to use AirPlay. I have tried moving my iTunes music directly onto my laptop's hard drive, and then I used AirPlay on this same laptop to connect to the Denon receiver. I always get a successful connection and the song plays, but the problem is that the connection inevitably drops.
I live in an apartment building and all of the many wireless routers in this building create a great deal of WiFi interference on both the 2.4 GHz and 5GHz bands. I have tried connecting the Netgear product to each the 2.4 and 5 GHz bands, but neither band can successfully maintain a wireless connection between the TC and the Netgear product. I also attempted to maintain a wireless connection to an iPod touch using the 2.4 GHz band and AirPlay on this iPod touch to play music on the Denon receiver. Again, I was able to establish a connection and successfully play music, but after a few minutes the connection dropped and the music stopped playing. I therefore have concluded that I have a poor wireless connection in the master bedroom. I can establish a connection, but it is intermittent with frequent drops. I have verified this with both laptops by working in the master bedroom for an entire day on both laptops. The Internet connection in this master bedroom proved to drop out frequently - about once an hour with the laptops. The wireless connection and the frequency of its dropout are far worse with the iPod touch and an iPhone.
I cannot relocate the TC. Also, this is an apartment and I therefore cannot extend the range of my network with Ethernet cable (I cannot drill through walls/ceilings, etc.). It is an old building with antiquated wiring and power-line adapters are not likely to function properly, nor can I spare the direct power outlet required with a power-line adapter. I simply need every outlet I can get and cannot afford to block any direct outlet.
My solution is to use a more powerful wireless router. I found the ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router which will likely provide a better connection to my wireless Internet in the master bedroom than the TC. The 802.11ac band of this Asus wireless router is totally useless to me, but based on what I have read I believe this router will provide a stronger connection at greater distances then my TC. And I will be ready for 802.11ac when it becomes more widely available.
However, I still need to maintain the TC's ability to work seamlessly with TM to backup my two laptops. Also, I doubt the new Asus router will provide OS X 10.8.2 with NAS like features and capabilities. Therefore, I still would like to use the TC's NAS capabilities to share files on my network wirelessly assuming the Asus wireless router fails to provide this feature. I need a new and more powerful wireless router, but I need to maintain the TC's NAS features and seamless integration with TM. Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone advise on how to set-up my existing TC with this new Asus wireless router in such a way to accomplish all of this?
Modem
Motorola SB6121 SURFboard DOCSIS 3.0 Cable Modem
Existing Wireless Router and Primary Wi-Fi Base Station - Apple Time Capsule
Apple Time Capsule MC343LL/A 1TB Sim DualBand (purchased June 2010, likely the Winter 2009 Model)
Desired New Wireless Router and Primary Wi-Fi Base Station - Non-Apple Asus
ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router
Extended Wi-Fi Base Station - Provides an Ethernet Connection to a Denon A/V Receiver Two Rooms Away from the Modem
Netgear Universal Dual Band Wireless Internet Adapter for TV & Blu-Ray (WNCE3001)
Addition External Hard Drive Attached to the Existing Apple Time Capsule via USB
WD My Book Studio 4TB Mac External Hard Drive Storage USB 3.0
Existing Laptops on the Wireless Network Requiring Time Machine Backups
MacBook Air (11-inch, Mid 2012) OS X 10.8.2
MacBook Pro (13-inch Mid 2010) OS X 10.8.2
Other Existing Apple Products (Clients) on the Wireless Network
iPod Touch (second generation) is model A1288.
iPad (1st generation)
Apple TV (3rd generation) - Quantity two (2)

Thanks Bob Timmons.
In regards to a Plan B, I hear ya brother. I am already on what feels like Plan Z. Getting WiFi to a far off room in an apartment building crowded with WiFi routers is a major pain.
I am basing my thoughts on the potential of a new and more powerful router reaching the far off master bedroom based on positive reviews on cnet.com, pcmag.com and pcworld.com. All 3 of these web sites have reviewed the Asus RT-AC66U 802.11AC wireless router as well as its virtual twin cousin 802.11n router. What impressed me is that all 3 sites rated this router #1 overall in terms of both range and speed (in both the 802.11n and 802.11AC flavors). They tested the router in real world scenarios where the router needed to compete with a lot of other wireless routers. One of the sites even buried this Asus router in a media room with thick walls and inside a media cabinet. This Asus router should be able to serve my 2.4 GHz band wireless clients (iPod Touch and iPhone 4) with a 2.4GHz Wireless-N band offering some 50 feet of dependable range and a 60 Mbps throughput at that range. I am hoping that works, but it's borderline for my master bedroom. My 5 GHz wireless clients (laptops) will enjoy a 5GHz Wireless-N band offering 150 feet of range and a 200 Mbps throughput at that range. I have no idea what most of that stuff means, but I did also read that Asus could reach 300 feet and I got really excited. My mileage may vary of course and I'm sure I'm making some mistakes in my interpretation of their data. However, my Winter 2009 Time Capsule was rated by cnet.com to deliver real world performance of less than that, and 802.11AC may or may not be useful to me someday. But when this Asus arrives and provides anything other than an excellent and consistent wireless signal without drops in the master bedroom it's going right back!
Your solution sounds great, but I have some questions. I'm using OS X 10.8.2 and Airport Utility (version 6.1 610.31) and on its third tab labeled "Wireless" the top option enables you to set "Network Mode" to either:
Create a wireless network
Extend a wireless network
Off
Given your advice to "Turn off the wireless on the TC," should I set Network Mode to Off? Sorry, I'm clueless in regards to how to turn off the wireless on the TC any other way. Can you provide specific steps on how to turn off the wireless on the TC? If what I wrote is correct then what should the rest of this Wireless tab look like, or perhaps it is irrelevant when wireless is off?
Next, what do you mean by "Configure the TC in Bridge Mode?" Under Airports Utility's fourth tab labeled "Network" the top option "Router Mode" allows for either:
DHCP and Nat
DHCP Only
Off (Bridge Mode)
Is your advice to Configure the TC in Bridge Mode as simple as setting Router Mode to Off (Bridge Mode)? If yes, then what should the rest of this "Network" tab look like? Anything else involved in configuring the TC in Bridge Mode or is it really as simple as setting the Router Mode to "Off (Bridge Mode)"?
How about the other tabs in Airport Utility, can they all stay as is assuming I use the same network name and password for the new Asus wireless router? Or do I need to make any other changes to the TC via Airport Utility?
Finally, in regards to your Plan B suggestion. I agree. But do you have a Plan B for me? I would greatly appreciate any alternative you could provide. Specifically, if you needed a TC's Internet connection to reach a far off corner of your home how would you do it? In the master bedroom I need both a wired Ethernet connection for the Denon a/v receiver and wireless Internet connection for the iPhone and iPod Touch.
Power-Line Adapters - High Cost, Blocks at Least One Wall Outlet and Does Not Solve the Wireless Need
I actually like exactly one power-line adapter, which is the D-Link DHP-540 PowerLine AV 500 4-Port Gigabit Switch. This D-Link power-line adapter plugs into your wall outlet with a normal sized plug (regular standard power cord much like any other electronic device) instead of all of the other recommended power-line adapters that not only use at least one wall outlet but also often block the second outlet. You cannot use a power strip with a power-line adapter which is very impractical for me. And everything about my home is strange and upside down. The wiring here is a disaster and I don't have faith in its ability to carry Internet access from the living room to the master bedroom. And this D-Link power-line adapter costs $90 each and I need at least two to make the connection to the Denon A/V receiver. So, $180 on this solution and I still don't have a dependable drop free wireless connection in the master bedroom. The Denon might get its Ethernet Internet connection from the power-line adapter, but if I want to use an iPhone 4 or iPod Touch to stream AirPlay music to the Denon wirelessly (Pandora/iTunes, etc.) from the master bedroom the wireless connection will not be stable in there and I've already spent $190 on just the two power-line adapters needed.
Extenders / Repeaters / Wirelessly Extending the Wireless Network
I have also read great things about the Amped Wireless High Power Wireless-N 600mW Gigabit Dual Band Range Extender (Repeater) SR20000G and the My Net Wi-Fi Range Extender. The former is very powerful and the latter is easier to install. Both cost about $150 ish so similar to a new Asus router. However, everything I read about Range Extenders points to them not being very effective for a far off corner of your house wherein it's apparently hard to place the range extender in the sweet spot where it both gets a strong enough signal to actually effectively extend the wireless signal and otherwise does not reduce network throughput speeds to unacceptable speeds.
Creating a Roaming Network By Hard Wiring with Ethernet Cable - Wife Would Say, "**** No!"
Even Apple seems to warn against wirelessly extending your network (see: http://support.apple.com/kb/HT4145#) and otherwise strongly recommends a roaming network where Ethernet cable is used to connect two wireless base stations. However, I am in an apartment where stringing together two wireless base stations with Ethernet cable would have an extremely low wife acceptance factor (WAF). I cannot (both contractually and from a skill prospective) hide Ethernet wire in the walls or ceiling. And having visible Ethernet cable running from room-to-room would be unacceptable, especially to the wife.
So what is left? Do you have a Plan B for me? Thanks in advance for your help!

How do I use time machine backup to restore onto a different computer

I am trying to troubleshoot the best way to back up my Mac. I have been a mac user since 20009 and always used a time machine. The two times I have needed it for backup, my computer did not read the portion the backup was. You could tell under disk utility the space was used. Just before the need of backup, it was backing up. So, I am wondering if I need to use a different method. I lost all of my Christmas 2015 movies. My computer did some weird thing with passwords and it needs some resetting I had to do with the support team on the phone. The support person could not figure out how to access the back up on time capsule. I noticed the password resetting made my computer name different by putting a 3 behind the name I assigned it.
One thought that has crossed my mind is can you use the time machine backup and open it up on a completely different computer? If so, I should have been able to someone access my information. I would like to know the answer and how do it so I know in case this ever happens again and so that I can rely on this expensive back up machine I have purchased two different times on two different computers and never been able to actually use.

Are you running Yosemite.. because it is the cause of loads of problems.
As to opening the TM backup from another computer.. yes you can.
Please read our TM expert Pondini.
Q14-17 on restore here.
http://pondini.org/TM/FAQ.html
Particularly as you will see Q17 and it will reference the prior info you need.
I have gone through this with several people.. and I have a post showing a manual file location and restore.
Can't access old files on time capsule
But not from Yosemite.. it has its own bunch of bugs.. as mentioned. Good luck with those.
I also strongly recommend people use a secondary backup method.. there are excellent third party.. I use Carbon Copy Cloner.. it is reasonable price.. $40 based on standard rsync.. and will create either bootable clones to a local drive or sparsebundle on a time capsule etc.
The bootable clone is the ideal way to recover files. since it is based on a simple computer reboot and then access of files that are in exactly the same place as you left them.. TM backs up in a most complicated manner.
See how tm works here. The top couple of articles and how it is different to clones. As Pondini suggests.. using both is no bad thing.
http://pondini.org/TM/Home.html
This is also useful for yosemite.. it is not working as TM used to.
Find files in Yosemite.
https://discussions.apple.com/thread/6681850?searchText=time%20machine%20yosemit e#27139370
While in Time Machine, press the key combination shift-command-C. The front window will show all mounted volumes. All snapshots should now be accessible. Select the one you want and navigate to the files you want to restore.
I am not sure why your previous use of TM failed.. In the midst of all its problems it does still work ok.. as mostly people can recover stuff they do.. albeit it needs a lot more messing than is typical Apple.

Initial Time machine backup to Time capsule results in kernel panic

I recently purchased a Retina display MacBook Pro (running Lion at the time) and transferred the data from an external hard drive with my Time Machine backups from my previous MBP. I also bought a new Time Capsule.
The first time I tried to back up to the Time Capsule from the Retina MBP via an ethernet connection it got to 40GB of 140GB before it shut down from a kernel panic. Interestingly, the Time Machine backup was successful when I used the external hard drive I was previously using for my Time Machine backups (connected via USB).
I don't think there is an issue with the Time Capsule because Finder can locate the Time Capsule and I can copy and paste files from the Macintosh HD to the Time Capsule disk.
I've done the following steps in order to try and fix the problem:
1. Repair permissions
2. Verify and Repair Macintosh HD
3. Updated the operating system to Mountain Lion (at which point I successfully completed a Time Machine backup to the external hard drive I was using for Time machine backups but was unable to backup to the Time Capsule without the computer crashing from a kernel panic)
4. Used Airport Utility to erase the sparse disk image bundle that had been created on the Time Capsule then tried to back up via ethernet to the time capsule - kernel panic ensued at 40GB of 140GB
5. Used Disk Utility to erase Macintosh HD and re-installed Mountain Lion. Transferred data from the external hard drive Time Machine backup from step 3.
6. Erased the sparse disk image bundle on the Time Capsule again.
7. Tried to backup to the Time Capsule again via Ethernet - kernel panic.
For each of the attemtps to back up to the Time Capsule I've used a different ethernet cable (Cat 5 and 5e) and plugged it into a different ethernet port on the Time Capsule each time. I've also tried using both Thunderbolt ports on the MBP (with an Ethernet to Thunderbolt adaptor).
I'm out of ideas on how to trouble shoot this problem and would greatly appreciate any ideas!!
If anyone knows how to read error logs, here's the readout from one of the kernic panics:
Thu Aug 9 23:58:29 2012
panic(cpu 6 caller 0xffffff80002c4794): Kernel trap at 0xffffff80003c0da3, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000130, CR3: 0x0000000000100000, CR4: 0x00000000001606e0
RAX: 0x0000000000000000, RBX: 0xffffff80ebcc0500, RCX: 0x000000000000000a, RDX: 0x0000000000004000
RSP: 0xffffff80f3bebd60, RBP: 0xffffff80f3bebef0, RSI: 0xffffff80008cd400, RDI: 0xffffff80ebcc0500
R8: 0xffffff80ebcce29c, R9: 0xffffff80f3bebc50, R10: 0xffffff80f1b73cb8, R11: 0x00000000001c3b08
R12: 0xffffff80ebcce200, R13: 0xffffff80ea22d000, R14: 0xffffff80ebca2400, R15: 0xffffff8013e85388
RFL: 0x0000000000010207, RIP: 0xffffff80003c0da3, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0x0000000000000130, Error code: 0x0000000000000000, Faulting CPU: 0x6
Backtrace (CPU 6), Frame : Return Address
0xffffff80f3beba10 : 0xffffff8000220792
0xffffff80f3beba90 : 0xffffff80002c4794
0xffffff80f3bebc40 : 0xffffff80002da55d
0xffffff80f3bebc60 : 0xffffff80003c0da3
0xffffff80f3bebef0 : 0xffffff80003c269d
0xffffff80f3bebf10 : 0xffffff800036523f
0xffffff80f3bebf60 : 0xffffff8000343c9b
0xffffff80f3bebfb0 : 0xffffff8000820057
BSD process name corresponding to current thread: kernel_task
Mac OS version:
11E2620
Kernel version:
Darwin Kernel Version 11.4.2: Wed May 30 20:13:51 PDT 2012; root:xnu-1699.31.2~1/RELEASE_X86_64
Kernel UUID: 25EC645A-8793-3201-8D0A-23EA280EC755
System model name: MacBookPro10,1 (Mac-C3EC7CD22292981F)
System uptime in nanoseconds: 824267354982
last loaded kext at 119110896089: com.lacie.driver.LaCie_RemoteComms          1.0.1 (addr 0xffffff7f807df000, size 12288)
last unloaded kext at 195930890039: com.lacie.driver.LaCie_RemoteComms          1.0.1 (addr 0xffffff7f807df000, size 8192)
loaded kexts:
com.intego.iokit.VirusBarrierX6Service          10.6.14
com.intego.iokit.VBX6NKE          1
com.intego.iokit.BehavioralKext          1
com.intego.kext.VirusBarrier.AppBarrierKPI          10.6.14
com.intego.kext.VirusBarrierKPI          10.6.14
com.oxsemi.driver.OxsemiDeviceType00          1.28.13
com.apple.filesystems.afpfs          9.8.1
com.apple.nke.asp_tcp          6.0.1
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AppleBluetoothMultitouch          70.12
com.apple.filesystems.autofs          3.0
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AGPM          100.12.69
com.apple.driver.ApplePlatformEnabler          2.0.5d3
com.apple.driver.X86PlatformShim          5.0.0d8
com.apple.driver.AppleHDA          2.2.3f13
com.apple.driver.AppleMikeyDriver          2.2.3f13
com.apple.driver.AppleUpstreamUserClient          3.5.9
com.apple.driver.AudioAUUC          1.59
com.apple.driver.AppleSMCPDRC          5.0.0d8
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.iokit.IOBluetoothSerialManager          4.0.7f2
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleSMCLMU          2.0.1d2
com.apple.GeForce          7.2.8
com.apple.driver.AudioIPCDriver          1.2.3
com.apple.driver.ApplePolicyControl          3.1.32
com.apple.driver.AppleMuxControl          3.1.32
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleMCCSControl          1.0.33
com.apple.driver.AppleIntelHD4000Graphics          7.2.8
com.apple.driver.AppleIntelFramebufferCapri          7.2.8
com.apple.driver.BroadcomUSBBluetoothHCIController          4.0.7f2
com.apple.driver.AppleUSBTCButtons          227.6
com.apple.driver.AppleUSBTCKeyboard          227.6
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          33
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.0.4
com.apple.driver.AppleSDXC          1.2.2
com.apple.driver.AppleUSBHub          5.0.8
com.apple.iokit.AppleBCM5701Ethernet          3.2.4b8
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.driver.AirPort.Brcm4331          560.7.21
com.apple.driver.AppleAHCIPort          2.3.0
com.apple.driver.AppleUSBEHCI          5.0.7
com.apple.driver.AppleUSBXHCI          1.0.7
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleACPIButtons          1.5
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.5
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          195.0.0
com.apple.nke.applicationfirewall          3.2.30
com.apple.security.quarantine          1.3
com.apple.security.TMSafetyNet          8
com.apple.driver.AppleIntelCPUPowerManagement          195.0.0
com.apple.security.SecureRemotePassword          1.0
com.apple.driver.AppleMultitouchDriver          231.4
com.apple.driver.IOBluetoothHIDDriver          4.0.7f2
com.apple.kext.triggers          1.0
com.apple.driver.DspFuncLib          2.2.3f13
com.apple.iokit.IOSurface          80.0.2
com.apple.iokit.IOSerialFamily          10.0.5
com.apple.iokit.IOAudioFamily          1.8.6fc18
com.apple.kext.OSvKernDSPLib          1.3
com.apple.driver.AppleHDAController          2.2.3f13
com.apple.iokit.IOHDAFamily          2.2.3f13
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleGraphicsControl          3.1.32
com.apple.driver.X86PlatformPlugin          5.1.1d6
com.apple.driver.AppleSMC          3.1.3d10
com.apple.driver.IOPlatformPluginFamily          5.1.1d6
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.nvidia.nvGK100hal          7.2.8
com.apple.NVDAResman          7.2.8
com.apple.iokit.IONDRVSupport          2.3.4
com.apple.iokit.IOGraphicsFamily          2.3.4
com.apple.driver.AppleUSBBluetoothHCIController          4.0.7f2
com.apple.iokit.IOBluetoothFamily          4.0.7f2
com.apple.driver.AppleUSBMultitouch          230.5
com.apple.iokit.IOUSBHIDDriver          5.0.0
com.apple.driver.AppleThunderboltDPInAdapter          1.8.4
com.apple.driver.AppleThunderboltDPAdapterFamily          1.8.4
com.apple.driver.AppleThunderboltPCIUpAdapter          1.2.5
com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.5
com.apple.driver.AppleUSBMergeNub          5.0.7
com.apple.driver.AppleUSBComposite          5.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice          3.2.1
com.apple.iokit.IOSCSIArchitectureModelFamily          3.2.1
com.apple.driver.AppleThunderboltNHI          1.6.0
com.apple.iokit.IOThunderboltFamily          2.0.3
com.apple.iokit.IOEthernetAVBController          1.0.1b1
com.apple.iokit.IOUSBUserClient          5.0.0
com.apple.iokit.IO80211Family          420.3
com.apple.iokit.IONetworkingFamily          2.1
com.apple.iokit.IOAHCIFamily          2.0.8
com.apple.iokit.IOUSBFamily          5.0.8
com.apple.driver.AppleEFIRuntime          1.6.1
com.apple.iokit.IOHIDFamily          1.7.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          177.5
com.apple.kext.AppleMatch          1.0.0d1
com.apple.driver.DiskImages          331.7
com.apple.iokit.IOStorageFamily          1.7.2
com.apple.driver.AppleKeyStore          28.18
com.apple.driver.AppleACPIPlatform          1.5
com.apple.iokit.IOPCIFamily          2.7
com.apple.iokit.IOACPIFamily          1.4
Model: MacBookPro10,1, BootROM MBP101.00EE.B00, 4 processors, Intel Core i7, 2.6 GHz, 8 GB, SMC 2.3f32
Graphics: NVIDIA GeForce GT 650M, NVIDIA GeForce GT 650M, PCIe, 1024 MB
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333531533642465238432D50422020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333531533642465238432D50422020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xEF), Broadcom BCM43xx 1.0 (5.106.198.19.21)
Bluetooth: Version 4.0.7f2, 2 service, 18 devices, 1 incoming serial ports
Network Service: Thunderbolt Ethernet, Ethernet, en4
Network Service: Wi-Fi, AirPort, en0
PCI Card: Apple 57762-A0, sppci_ethernet, Thunderbolt@104,0,0
Serial ATA Device: APPLE SSD SM512E, 500.28 GB
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1a100000 / 2
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8510, 0x1a110000 / 3
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1d100000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2512, 0x1d180000 / 3
USB Device: BRCM20702 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1d181000 / 5
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8286, 0x1d181300 / 7
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0262, 0x1d182000 / 4

Any or all of the following third-party system modifications may be contributing to your problem:
LaCie drive software
VirusBarrier
I suggest you uninstall them according to the developers' instructions, reboot, and see whether there's any improvement. If there is, you can experiment with putting them back, one at a time, to identify which one is at fault. "VirusBarrier" is harmful and should not be reinstalled in any case.
If there's no improvement after making the suggested changes, post again.

Can I upload a Time Machine backup (Passport) made on my computer to my husband's computer?

I'm afraid that my present Macbook is starting to have problems. I have an old Time Machine backup that I made on a Passport USB drive last year (using OS 10.6) so I can transfer the contents of my computer to my husband's Macbook (also OS 10.6). But when I connected the Passport, I got a message saying, "This backup was created on a different computer. If you reuse this backup it can no longer be used by the original computer."
I'm not sure what the implications of this are. I'm pretty sure I created the backup on my computer, but it might have been made on my husband's computer. In any case, I'd like to make a new one on my computer and upload it to my husband's as planned. Question:
1. Is there a way I can check to see which computer the backup was made on?
2. If it's an old backup of what's on my computer, is there a way I can update it, rather than go through the long process of creating a new backup? (The USB drive is 1 TB, so an original backup takes forever!)
3. If it's a backup of what's on my husband's computer, can I overwrite it ("Reuse Backup"?) and then upload it to his computer?
Thanks for any information out there!

1. Hook up the drive to your husband's computer. If you don't get the same error message, then it is likely a backup of his computer. If you don't get an error message when attached to your husband's computer, enter Time Machine and check the admin user name.
2. Depends on answer to first question. If it is your computer, start a backup.
3. You can have 2 backups on the same drive. If it is your husband's backup, just start a new one for your computer.

I am trying to install Mavericks on my McbookAir, but it won't install, saying that my hd is used for time machine backups. I have an external HD connected to my mbAir that I'm using for time machine.

2012 Macbk air, with OSX 10.8.5. See my question above. Mavericks won't install on my Air's HD, says that both the HD - AND - the external HD (which has a different name from the laptop HD) are used for time machine backups. I've deleted my time machine plists, restarted, repaired permissions, turned time machine off, repeatedly selected the external drive in time machine preferences. HELP. (Install went perfectly on my desktop Mac, which also has an external HD for time machine).

I need to add that the only place I have the "Backups.backupdb" folder is on my backup external disk, and it's not on my HD :-( . If it were, I'd delete it!

I'm having a problem with logging into a FileVault-protected user account after restoring from Time Machine backup.

Hi all,
My computer had been running really slowly for a while, so I decided to erase the whole hard drive and reinstall the operating system, and then I was going to restore the files I cared about from Time Machine. The main account, which had all my documents and photos, was FileVault-protected. The last thing I did before erasing the hard drive was to run one last Time Machine backup. As far as I remember, I always ran Time Machine backups with the FileVaulted user logged in.
I don't remember whether I was using FileVault 1 or 2. I had been using FileVault 1, but I installed Lion as soon as it came out and I thought I had migrated to FileVault 2 at that point.
Once I erased the hard drive and reinstalled the operating system, I browsed the Time Machine disk and, within the Users folder, there was no folder for the main user account. When I tried to reinstall everything by restoring from Time Machine backup, I'd get the option for all the user accounts, but when I tried to log in with the main one I'd get the dreaded "You are unable to log in to the FileVault user account "User" at this time. Log in failed because an error occurred." Finally, when attempting to restore from the Time Machine backup again, I noticed something strange: After the computer got to about 10% done restoring, it declared itself completed successfully and rebooted.
I've tried a number of tips that came up from questions about similar issues on the Apple support forum, but had no luck. Is there any way to get these files back? Did they ever even get backed up?
Thanks.

Hroodbwai wrote:
I can't find it! not sure what's going on but the only folder shown is the " Shared" folder.
Did you have only the one user account? If there were others, they should also be in the "Users" folder. You probably won't have access to the files inside them, but they should be there.
From what can make out, it looks like it's not backed up any of the files for the filevault account. Can't see user folder when looking through previous backups in Time Machine galaxy view.
Are you doing that from a Finder window set to your internal HD, or your computer name? It should look something like this (with the Finder in List view):
|
|
I'd been logging out and backing up manually on a regular basis.
Scheduled backups should run normally; but they won't back up the File Vault sparse bundle, nor will any run manually.
The only time it's backed-up is when you actually log out.
You should have seen this window on logout:
|
|
followed by this one:
|
|
If you didn't see the second one, or cancelled it, the account wasn't backed-up.

I just restored my 13" MBP i5 at the apple store to the newest version of Lion after issues with a previous Time Machine backup from Snow Leopard- this time I created a new account and just ported files and folders, and now MS Office doesn't work. Help?

I just restored my 13" MBP i5 at the apple store to the newest version of Lion after issues with a previous Time Machine backup from Snow Leopard- this time I created a new account and just ported files and folders, and now MS Office doesn't work.
^^ that's the main problem. Here's the full history.
I bought a new 13" i5 MBP, early 2011 edition. I had an old white Macbook 2.14 ghz core2duo on Snow Leopard. I attempted to port over my time machine backup, but encountered problems in that my User was inaccessible from the new computer after the import finished, and I had to go in and change the root password, etc, and for some reason or another, I couldn't install any programs at all from that administrator's account. By "couldn't" I mean I could install them, but upon installation they would never boot. So, I took it to the apple store and did a clean install from the most up to date Lion OSX. Then, I created a brand new admin account, instead of trying to import the old one, and things seemed great. Then, I just imported my old files from the TM backup, but not any system settings, permissions, or user data. Just my Docs, pics, vids, apps, and itunes stuff.
Here's where things get weird again. I imported this stuff under the name "old", but all of these folders have a red negative sign on them, marking them as restricted. So, from my main admin account, I cannot even peruse these folders. Since I didn't import user data, I can't sign in to the "old" account to change permissions. I already tried to change the permissions from system preferences, but that didn't change anything. And now, for whatever reason, of all the apps that were imported then, MS Office is the only set of apps that does not work. When I click on it, it just says there was a problem and asks if I'd like to send a report to apple. I tried reinstalling it to no avail. I'm an English student, so i really need access to Word. Can anyone help? The Apple store is a major detour for me and would like to fix this issue myself.

Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.)

How can I restore a single image from an aperture time machine backup, do I have to restore the entire library? that does not make sense

I hope there has been found a more efficiant solution for this, how can I restore a single image from an aperture time machine backup, I really hope I don't have to restore the entire library? that does not make sense
any suggestions?

Did you try browsing your backups in the Finder ? That is, do not go and "Enter Time Machine". Instead, navigate to your Time Machine backup via Finder and then manually go to the time period (by folder name) you are looking for ... when you find your Aperture library you can then "Show Package Contents" and find the Master you are looking for.

Time machine backup illegal name

Similar Messages

Maybe you are looking for