Time Machine backup not appear

Hi
I bought a bigger HDD for MacBook Pro (so I could install VMs locally) and decided to test TM data restore as a procedure to migrate data. I wanted to keep using my MBP for work, but luckily we have a loan which i used as follows:-
- Stuck in new 200GB HDD in drive chassis
- Booted off new HDD via USB on MBP
- Installed Leopard on new HDD
- Backed up my MBP to Leopard Server-based Time Machine across network
- When reached Migration Assistant I chose to restore from TM Backup
- This then froze. (I guess it doesn't just look across a network for TM Servers)
So...
- I rebooted MBP
- Plugged in external FW drive used for TM backups on Leopard Server
- Asked Migration Assistant to restore from TM Backup
- It found the drive but only offered to restore the Leopard Server Backup, not my laptop.
Have I misunderstood something?
Cheers
C

In the Finder, press the key combination shift-command-C, or select
Go ▹ Computer
from the menu bar. A window will open showing all mounted volumes. Select the one in question and open the Info window. What is shown as the Format in the General section? If it's not "Mac OS Extended," Time Machine can't back up the volume.

Similar Messages

  • Time machine backup not appearing in migration asst visible on time capsule

    Due to a disk utility error I just completed a fresh install of 10.9.2 when I go to the migration assistant that mac doesn't appear as a source to restore all of my old files back again. However, when I manually open the time capsule I see the hard drive and can copy the user folder but that doesn't help with applications etc... Please advise how to make the time capsule restore my files?

    Similar problem here under 10.5.8 (mac mini mid-2007 intel core 2 duo 2GHz, 4GB ram)
    Only way to fix it is to restart the computer, it clears it for a while but it always come back within a couple of days or a week. It appears that in my case it does not happen every time time machine runs, but it happens quite frequently. The number of duplicate volumes is also random, most of the times I get 2 or 3 duplicates but I had up to 10 a couple of times. I assumed this might be due to 10.5 but the OP's case suggest it's a time machine problem independent of the OS version. Could it be related to the use of a time capsule? anyone with such problem using an extreme with an attached drive for TM backup?
    It gets weirder once you consider that my wife iMac (latest i7) and kids MacBook pros (Dec 2009) (all under 10.6x) do not have the problem using the same time capsule. This would suggest it is caused by specific hardware combinations? (in my case time capsule with mac mini)

  • Time machine does not appear to backup an external HD.  how do I get that included in the backup?

    time machine does not appear to backup an external HD.  how do I get that included in the backup?

    In the Finder, press the key combination shift-command-C, or select
    Go ▹ Computer
    from the menu bar. A window will open showing all mounted volumes. Select the one in question and open the Info window. What is shown as the Format in the General section? If it's not "Mac OS Extended," Time Machine can't back up the volume.

  • The first time I connected my new My Passport portable hard drive to my Mac, the message asking if I want to use the drive to back up with Time Machine did not appear.  What is the next step?

    The first time I connected my new My Passport portable hard drive to my MacBook Pro, the message asking if I want to use the drive to back up with Time Machine did not appear.  I would like to set it up to do this.  What would my next step be?

    Drive Partition and Format
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Open Time Machine preferences to select this drive for use as the backup drive. Turn on Time Machine.

  • Why is Time machine backup not working after Mavericks upgrade?

    Why is Time machine backup not working after Mavericks upgrade?

    I had the same problem due to the Fire Wire port.  Apple tested it told me it is OK!, I tried a new cable, and have tested both ports on my back up device.  I find it strange that as soon as I installed Mavericks.  The drive does work using USB.  It could be a coincidence, I don't absolutely know at this point, my back up drive ports could stop working, but I doubt it!

  • HT3275 Time Machine backup not completed  because "the backup disk image ....sparsebundle already in use"

    Time Machine backup not completed because the "backup disk image"/Volumes/Data/MacBookAir.sparsebundle" is already in use. ??

    Reboot the TC.. this is most common issue since Mountain Lion.
    Look at the More Like This just on the right column.

  • Why does power nap time machine backup not work on my August 2012 macbook pro retina?

    Hello. I got a MacBook Pro with retina display in August of this year 2012. I have done the SMC ? firmware update and I have 10.8.2 installed on my machine. Power nap still doesn't seem to work. I have the button in energy saver preferences and I have clicked it so it looks like power nap should work. When I am running Time Machine backup with the time capsule and I close the lid (plugged into power) it appears that no progress is made when I reopen the lid. I have closed the lid with activity monitor running and with network displayed. When I reopen the lid it may take up to one minutes to come out of sleep. When it does come out  of sleep I can see that there has been no network traffic.  Eventually, time machine backup resumes and I can see several megabytes per second. When I closed the lid overnight, just to make sure backup didn't restart after lid closing, I saw that no progress had been made in backup when I reopened the lid.
    What options are left if I already have 10.8.2 and I have done the required firmware?  One person has mentioned a clean install but I really don't like to have to reenter all the different passwords and all the different preferences again unless that's absolutely necessary. Are there any other options left to try before a clean install?
    One other bit of information.  I have filevault turned on; however, it looks like others have a working power nap even with file vault enabled.  If this is not an option, the power nap button should be grayed out when the machine is in filevault.
    Thank you for any help.

    Yeah I still have the same problem BTW; it still does not work.
    The second I open the lid and take it out of sleep mode, it starts to backup automagically, but when it's sleeping EVEN when it's connected to AC power, TM backups do NOT work to my OS X Server. 
    I don't understand what the problem is here.
    I didn't before but I do have FileVault turned on now -- should that make a difference?
    In either situation it didn't work, but now that I think about it, I could understand why it wouldn't backup while asleep.  Apparently the encrypted volume will stay encrypted during sleep and even at the lock screen; it's not until you open the lid and log in from the lock screen that it will unlock the encrypted boot volume.
    But even still, I did *not* have FV turned on before, and this still did not work.
    Is there some third party solution that can do what I want this to do?
    Here's my use case:
    1.) I have a mac mini at home that I use when I'm at home; it runs OS X server.app (bought and paid for) and has TM server turned on.
    2.) I have a laptop that I mainly use at work and I don't use at all when I come home (ie. when I'm ready to head home for the day I close the lid and don't open it until I'm back at work the next day, but the laptop does come home with me every day).
    What I want to have happen is this:
    1.) The minute my laptop enters my home wifi lan (even though it's still asleep with lid closed) I want it to automatically backup the boot drive.
    I thought that's what Power Nap was supposed to do, but then I found out that in order for this to work, you have to be connected to AC power; so then I tried that -- ie. every day I come home, I put my laptop in a docking station that has AC power, but TM backups while lid closed / sleeping STILL do not occur!
    Thanks for your help everyone...Looking forward to a solution that works.
    EDIT:
    I found this thread:
    https://discussions.apple.com/thread/4158709
    "It looks like Power Nap doesn't perform Time Capsule backups when the MacBook Air screen is closed."
    So apparently that is yet *another* requirement to get powernap working.  The lid can not be closed. 
    What is the difference between sleep with lid open and sleep with lid closed!?

  • Time Machine Backup Not Working - Please Help!

    Hey everyone - first post here, please help!  I'm having trouble with TM.  Here are the messages from Time Machine Buddy:
    Starting automatic backup
    Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
    Forcing deep traversal on source: "Macintosh HD" (mount: '/' fsUUID: AD5C219F-0EC8-32C3-B827-2FF171A4AE46 eventDBUUID: 68A67596-22DD-4FB5-AA49-390E857688E1)
    Backup content size: 166.93 GB excluded items size: 34.36 GB for volume Macintosh HD
    Found 842174 files (132.56 GB) needing backup
    160.14 GB required (including padding), 824.43 GB available
    Copied 74.41 GB of 132.56 GB, 693114 of 842174 items
    Copied 130.6 GB of 132.56 GB, 728437 of 842174 items
    Copied 731588 files (130.76 GB) from volume Macintosh HD.
    Backup canceled.
    Starting manual backup
    Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
    Forcing deep traversal on source: "Macintosh HD" (mount: '/' fsUUID: AD5C219F-0EC8-32C3-B827-2FF171A4AE46 eventDBUUID: 68A67596-22DD-4FB5-AA49-390E857688E1)
    Didn't get valid migration dates.
    Found 842174 files (1.87 GB) needing backup
    3.9 GB required (including padding), 692.16 GB available
    Copied 85694 files (1.71 GB) from volume Macintosh HD.
    Using file event preflight for Macintosh HD
    Will copy (41.8 MB) from Macintosh HD
    Found 430 files (42.2 MB) needing backup
    2.23 GB required (including padding), 689.79 GB available
    Copied 5022 files (46 MB) from volume Macintosh HD.
    Created new backup: 2012-10-09-015038
    Copying OS X Recovery set
    Starting post-backup thinning
    Error: Error Domain=NSOSStatusErrorDomain Code=-50 "The operation couldn’t be completed. (OSStatus error -50.)" (paramErr: error in user parameter list) deleting backup: /Volumes/Time Machine Back
    I tried to back it up the first time, and it was taking forever, so I stopped it, and then started a new backup.  Can someone let me know what to do so I can be comfortable knowing the machine is definitely backed up?
    Thanks!

    The indication that the backup completed successfully is the best evidence that it did. If you want something more explicit, you can proceed as below.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Drag or copy — do not type — the following line into the Terminal window, then press return:
    sudo tmutil compare
    You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
    The command will take at least a few minutes to run. Eventually some lines of output will appear below what you entered.
    Each line that begins with a plus sign (“+”) represents a file that has been added to the source volume since the last snapshot was taken. These files have not been backed up yet.
    Each line that begins with an exclamation point (“!”) represents a file that has changed on the source volume. These files have been backed up, but not in their present state.
    Each line that begins with a minus sign (“-“) represents a file that has been removed from the source volume.
    Files that you’ve excluded from backup, or that are excluded automatically, are ignored.
    At the end of the output, you’ll get some lines like the following:
    Added:
    Removed:
    Changed:
    These lines show the total amount of data added, removed, or changed on the source(s) since the last snapshot.

  • Time Machine backup not completed with error "The disk was not ejected probably..."

    I have been using an UBS 3.0 capable external 2.5" hard drive from Lacie to backup my old 21.5" iMac for the last 2 years without problem.
    Recently I bought the new late 2013 27" iMac running 10.8.5 and try to migrate the data from the Time Machine backup without success. After a while, Mountain Lion complained with the below error and only data before this message appear were migrated. When I connected the same disk back to my old iMac and ran disk utility, everything looks fine and I was able to complete the TM backup. Eventually, I managed to migrate the data using network copy, instead of TM backup.
    Now that my new iMac is back online and I tried to setup Time Machine backup using the same 2.5" Lacie drive, the same error message appeared again in the middle of TM backup (after 3 minutes).
    Wonder if anyone ran into the same issue and if there is an issue with the UBS 3.0 port on the new iMac, or there is a work around to this problem.
    Any help or pointer would be highly appreciated.
    Cheers,
    Richard

    The system is losing connection with the drive for some reason, likely because the drive is losing power and unmounting, but there could be other reasons as well. Do you have access to an external power supply for the drive? If so then connect tthat so it is not relying on the USB bus power to keep the drive running. I have also found this to happen with some USB 3.0 enclosures, and it appears to be a compatibility issue with them and Apple's USB 3.0 drivers, so another option is to get a USB 2.0 hub and use that for the connection. Things will not run at USB 3.0 speeds, but the drives will not continually disconnect.

  • How migrate from older time machine backup (not the latest)?

    My old Snow Leopard Mac had a dying hard drive. In the last few days, files were disappearing left and right.
    I bought a new Lion Mac, but I don't trust the Time Machine backup for the last few days and I would like to migrate the backup from just before the problems started.
    I can't figure out any way to do this. Migration Assistant only offers to import the latest backup
    And the full Time Machine Restore feature, which DOES allow you to pick a backup, only works on the original machine, which will not boot any more.
    Can I somehow trick Migration Assistant by deleting the last few backups from the Time Machine drive and renaming the one I want to use to Latest? (I've made a copy of the entire Time Machine folder just in case...)
    Any other way to do this? I'm sure many people are in this situation.

    I have this same question.  My hard drive died, and the last few Time Machine backups appear to be incomplete or corrupted.  New hard drive installed now.  Migration Assistant and Setup Assistant first refuse to even recognize my backup drive, then insist on migrating data from the newest backup instead of an older (but definitely complete and reliable) backup.  So I haven't migrated anything and am still using my old (OS 10.4) computer until i get this straightened out.  Ideas?

  • Time machine does not appear in Disk Utility

    Time machine does not show up in Disk Utilities, connected by ethernet.  I need to erase the disk.  How to solve?

    I am sorry - I simply do not understand your instructions!
    I have 2 Time Capsules and have been using both.  However a few days ago they quit working.  I have had to turn off Time Machine because I am getting hourly alerts that back-up failed because there is not enough space.  It does not delete old backups to provide additional space.  I am willing to erase both to try to get them working again but I cannot figure out how to erase and setup the drives.  Hence I turned Time Machine off.
    There is nothing wrong with the MBP internal hard drive.  "Sparse bundle" is total Greek to me!  My wifi network appears to be working properly.  The internal HD is mounted in Disk Utilities and verified as working properly.  I am a long time user of Apple but I am still a novice (Level 1)!
    Perhaps I should start a new thread.

  • 10.5 Time Machine backup not visible in 10.6 Migration Assistant

    Hello everyone,
    Helping my not-so-tech savvy auntie move over from her old 5,1 iMac to a newer 8,1 MacBook. Her old iMac has a Time Machine backup on OS 10.5.8. I plugged in the Time Machine to the new MacBook (which is on a clean install of OS 10.6.8) and for some reason the Migration Assistant is not picking up the Time Machine in the "Select Your Disk" section. All I can see is the MacBook's internal HD. The Time Machine backup is showing up in Finder, however the disk's icon is yellow, not Time Machine green.
    I'm a bit stumped - can someone please advise? By all indications, a 10.5 Time Machine backup should be able to restore to a 10.6 system. We are visiting for the weekend and I really would like to get her up and running before we leave tomorrow.
    Thanks!
    VIkki

    Yes, that's option B as she still has the IMac but I'm curious as to why the TM backup isn't working - just in case I need to do this on another machine down the road, it would be nice to know what's going wrong with the more convenient TM restore option.... Thanks!

  • External hard drive time machine backups not mounting

    I have used Seagate 500.11 external hard drive as a backup location for the time machine for over two years. I just got a message that it had not updated in over thirty days.  It is not listed on FInder, but it is listed on the disc utility.  The Time machine backups  are grayed out on the disc utility screen and cannot be mounted, even after the repair and verification tests said that their volumes were ok.  What should I do?

    Time Machine does not create bootable clones. It does not even create a bootable backup. If that's what you prefer then do not use Time Machine.
    If you use Time Machine then you must allocate at least twice as much space for the backups than the capacity of the drive you are backing up. A 2 TB backup drive would be suitable for a 1 TB main drive or smaller.
    If you plan to create a bootable backup, then partition the backup drive with one partition the size required for the clone. Then use the other partition for you additional storage neeeds.

  • Time Machine Backup Not Accessible

    Hello all,
    Just had a computer die on me (HDD went bad) and took the oprotunity to upgrade, but my time machine backups are acting weird and I cannot get to my data.  My setup is:
    Dead computer:  OS X 10.6.8
    New computer:  OS X 10.8.3 (maybe 10.8.5, reinstalled today and it took 4 freaking hours to d/l the OS.  Sure miss those OS DVDs...)
    TM backups:  Going to the second HDD of OS X Server 10.7.5 over ethernet
    Other cmoputer: OS X 10.8.4 (my laptop I used to try and view the TM backups)
    First thing I did was use migration assistant on the new computer to move everything over from the old computers TM backup... and that did not go well.  Files were missing, and the computer acted sluggish and displayed anomalies such as the menu bar at top vanishing until the desktop was clicked, and other weird little things.  Thought: okay, must be the jump in OS versions.  No problem, I'll do a fresh install.
    So now I have decided to access the dead computers backup using TM from another computer.  First problem:  nobody has permissions to access the sparse bundle on the drive.  Fixed that with the Admin account on the server, adding my u/n as having read/write access.
    Now I can mount the sparse bundle, and I see all the folders are there, and some files.  I do the "Browse other backup disks..." from my "other computer" on the network, and it gives me the option "Browse dead computer on ..."  Click that and into space we go... and all I see are my files, on my local computer.  Same thing happens when I use the server itself to try and view the sparse bundle.
    I figure this is something weird with using the network and decide to try something else.  I reformat another HDD connected to the server via FW800 as a case-sensitive drive, open up the sparse bundle, and copy the root folder onto the drive.  Took a few hours, got one -50 error message (but it didn't stop the copy) and just tried to access it using "Browse dead computer on ..." and again, it shows me the local files.  It doesn't display any of the TM backups from the dead computer.
    What's going on here?  Durring the OS install, I can pick the "restore system from TM" and it will find the TM server, I enter the u/n and p/w of the dead computer, and it prompts me to pick a TM backup I'd like to restore from.  Likewise from migration assistant, it sees the TM backups just fine, and it "works" to an extent (in that it copies most of my files over.  From what I recall, migration didn't prompt for a day to pick, it just copied probably the latest backup, which I bet wasn't complete due to the dead computer kicking the can for whatever reason.  Moot point though).  Is a OS version conflict preventing me from viewing a backup created with 10.6.8?  Would a computer running SL be able to view the TM backup properly?  (...I thought I tried this, can't recal now.  But I can try at work again, I do have one last SL machine on the network).
    Anyway, what other options do I have to view the data?  At this point, I feel like I'm stuck rooting through the backups folder and hunting for files to copy over manually, which I know isn't prescribed practice.
    Thanks for any input.

    You can try a cloning program so that you'll have multiple backups which can help in a situation like this.
    Clone  - Carbon Copy Cloner          (Often recommended as it has more features than some others)
    Clone – Data Backup
    Clone – Deja Vu
    Clone  - SuperDuper
    Clone - Synk
    Clone Software – 6 Applications Tested
    Commonly Used Backup Methods

  • Time Machine backup not complete?

    I've had Time Machine running now succesfully for a while.
    HOWEVER ... a week ago my machine all of a sudden came to a grinding halt, with the internal HD becoming unresponsive.
    After a lot of checking for solutions online, I've decided to erase the HD, and restore a former system thru TimeMachine.
    The internal HD is still not functioning properly, but when I start up from an external HD, I can see it in Finder. When I check the contents, however, it does not seem to contain my applications!
    I thought TM was supposed to make a full system backup?
    Or maybe I'm looking in the wrong place?
    Also, it now takes AGES for a folder to open on the restored drive. Is this normal?

    TC-Productions wrote:
    I've had Time Machine running now succesfully for a while.
    HOWEVER ... a week ago my machine all of a sudden came to a grinding halt, with the internal HD becoming unresponsive.
    After a lot of checking for solutions online, I've decided to erase the HD, and restore a former system thru TimeMachine.
    Exactly how did you do the restore?
    The internal HD is still not functioning properly, but when I start up from an external HD, I can see it in Finder. When I check the contents, however, it does not seem to contain my applications!
    I thought TM was supposed to make a full system backup?
    Or maybe I'm looking in the wrong place?
    Since there's a problem on the internal, don't trust anything you see there. When you start up from the external, use Time Machine to see what's on the Time Machine backups, via the "Star Wars" display. Unless you excluded the Applications folder via TM Preferences > Options, it should be there.
    Also, it now takes AGES for a folder to open on the restored drive. Is this normal?
    If the drive is failing, don't count on anything being normal!

Maybe you are looking for