Time Machine backup on MBA 13" drop connection after a while

Nov 2010 MBA 13", OS X 10.6.7 (latest)
2008 Time Capsule, Firmware 7.5.2 (latest)
Since a while ago, possibly 10.6.7 patch, my MBA has had problems maintaining a wireless connection both to my TC and to an Airport Express that I have, especially when left unattended for 10' or so. My Iphone 4 and a Vista PC on the same network never had a similar problem.
Genius Bar folks ran hardware tests which showed nothing, then suggested a clean install and app migration (without network settings) which I did. For a day or so my MBA then starting to behave well.
Since yesterday, when I reinstalled 10.6.7, my MBA doesn't drop the connection, but has another problem. It won't finish its wireless Time Machine backup (3.6GB). Sometimes it can't find the TC disk, others it can. Then it goes ok for a while, even sometimes 2/3 of the way and then drops the internet connection and the connection to TC, but the Airport binding to the TC still shows as active on the MBA menubar. If I turn the Airport interface off and back on again on the MBA, eventually after a while it might find the wireless network again.
The only other internet-related app running in the background is Skype 5.1.0.914 (latest). Also, TC network channel is not shared with any other wireless close by.
I strongly believe this is a problem with the latest OS X patch (10.6.7) and MBA/TC combination. Even while it backups ok, it seems that the backup speed is low, which points to some conflict.
Do other people have the same or a similar issue?  Can Apple Support chime in, since Genius Bar suggestion didn't do much for me?
Thanks in advance.

Update:
Stopping Skype allows backups to run faster and complete normally. In fact Time Machine has never been that fast for me..
Seems the problem is gone, hopefully this might also help others.

Similar Messages

  • Is possible to have a time machine backup on an external hd connected to either a primary or secondary router and not have "back to my mac" using 10.7.3?

    Is possible to have a time machine backup on an external hd connected to either a primary or secondary router and not have "back to my mac" using 10.7.3?

    The bottom line is that Apple does not support Time Machine backups at the USB port of the AirPort Extreme. If they don't support their own router, they certainly don't support other routers from other manufacturers.
    Connect the drive directly to the Mac using either USB or FireWire.....or....use a Time Capsule.  Either of these setups will be supported.
    If you want to try the unsupported method(s), you can certainly do so. But, I would suggest that you have a secondary backup plan in place if this is important data that you will be backing up.

  • Time Machine: Backup folder changing size when connected to different computers

    Can someone please help me wrap my head around why the size of my Time Machine backup folder changes when connected to different computers? I tried to be as thorough as possible.  Thanks in advance for taking the time to read this.
    I made a backup of my one laptop (MacBook Pro running 10.6.8) before installing Mavericks.  The backup folder size is 258.56 GB and it is on a 1TB WD external.  There are no other computers backed up in this folder.
    Last night, I tried to copy the backup folder to another 1TB WD external and ran into the “you can’t do that” message.  After some researching, I came across articles explaining how Time Machine handles HDs and, in order for me to copy my backup folder, the drive I want to copy the folder to needs to have the “Ignore ownership on this volume” deselected.
    Okay, so here is my situation: I have the “Ignore ownership on this volume” deselected and journaling is correct on the drive I want to copy the backup folder to.  So I can continue working on my laptop, I want to use a different computer to copy the backup folder from one HD to the other.  The problem I’m having is each computer I own is showing me a different backup folder size O.o.
    (1) The computer I want to use – a Power Mac G5 Quad running 10.4.11 (non intel) – is showing a backup folder size of 592.7 MB, but the HD shows there is 258 GB being used.  When I drag copy, I only get a 592.7 MB backup folder.  For some reason, the backup folder is the only folder acting this way. I compared other folders from the same and different externals and all the sizes match up perfectly no matter the computer they were connected to. How is this possible?
    (2) My second option - Mac Pro (early 2009) running 10.9.4 – is showing a 256.15 GB backup folder size.  Very close, but not 258.56 GB.
    (3) My last option is to use the computer I’m trying to stay away from, the MacBook Pro running 10.6.8.  This is the computer I backed up and is showing me the correct folder size = 258.56GB.  As I mentioned, I'd like to work on my laptop while copying the backup folder using one of my other computers.
    I am able to drag and drop from each computer, but the folder size depends on the computer I’m using.  I don’t understand why I can't do a simple drag and drop of a 258 GB folder.
    Many thanks!!

    The directory files that you are seeing are not real. They are links to the actual backup files that are stored in a hidden directory on the drive. If you were to look at the same drive on a pc, you would see the folders and you would a list files that are in the folders but the files would all be 0 byte files and Windows will tell you the file is empty because there is nothing there but a link which Windows does not understand.
    So the point is you can't just copy the backupd files. The best solution that I know of (and maybe someone else will chime in) for copying them is to mirror the drive with something like Carbon Copy or some other program.
    See this site for more information about time machine and how it works: http://pondini.org/OSX/Home.html

  • Can I perform a Time Machine backup to a USB drive connected to the Time Capsule 3TB

    I would like to perform Time Machine backups to a portable USB drive, to use as an off-site backup copy.   However, when I plug the drive into the Time Capsule (3TB) it isn't seen by Time Machine from any of the computers on my network.  What do I need to do to make this work?

    I'm not sure about whether Time Machine can include a drive that is a month out of date in a normal rotation.
    This won't be a "normal" rotation. Assuming that you have already configured Time Machine on each Mac to back up to the USB drive, when you connect the drive to the Time Capsule, you will need to manually click Backup Now on a Mac to get the backup started. Then, do the same with other Macs that you want to back up.
    You could wait and see if Time Machine will start to back up on its own, but the wait would be unpredictable as far as time was concerned.
    Time Machine will also spend a good deal more time in the "Preparing" stage since it will have to look a month of history on the Mac since the last backup.
    It is set up and recognized in the Airport utility, and mounts normally. I can see the files using finder, but I can't get Time Machine to recognize that it is there and available for backups.
    So, if you open System Preferences on a Mac,
    Then, open Time Machine
    Click Add or Remove Disk
    The USB drive doe not appear as a potential destination?
    Have you restarted both the Mac and the Time Capsule?
    Any recent changes to the Mac.....like installing a new operating system?

  • Time Machine Backup on External Drive Stops working after one week

    Hello,
    I'm having a problem with the Time machine backup on an external LaCie drive. After e few days, it suddenly locks up, not performing any backup unless I force-restart my computer and switch off the drive.
    *My setup*:
    - iMac Alu 24 with MacOS X 10.5.1 and 3Gb RAM
    - LaCie external drive 320 Gb - design by Porsche, connected to the FW 400 port of the iMac --> this is the one used for the bakcups, it is left powered on at any time (never switched off)
    - 2 other LaCie external drives 160 Gb - design by Porsche, connected to the FW 400 port of the iMac --> they are generally switched off
    TimeMachine is setup to its default scenario, backing up automatically on the external 320 Gb.
    *Daily usage* :
    - the iMac is set to boot automatically at 6:45
    - I usually switch it off manualy at the end of the day
    - Screen Saver is set to launch after 5 minutes
    - sleep time for computer is set to 1:30 hour
    - display sleep 15 min
    - hard disk are set to sleep whenever possible
    First symptom : the computer never goes to sleep
    Second symptom : I had the following problem already twice since I installed Leopard, once with the original install and today with the updated 10.5.1 version:
    - automatic backups went fine during the whole day : 7:45 8:45 9:45...
    - then an automatic backup starts but never finishes
    *Console log extract* :
    Nov 18 12:45:17 rjosse-iMac-Intel /System/Library/CoreServices/backupd[602]: Backup requested by automatic scheduler
    Nov 18 12:45:17 rjosse-iMac-Intel /System/Library/CoreServices/backupd[602]: Starting standard backup
    Nov 18 12:45:23 rjosse-iMac-Intel /System/Library/CoreServices/backupd[602]: Backing up to: /Volumes/Aristotle/Backups.backupdb
    Nov 18 12:45:23 rjosse-iMac-Intel /System/Library/CoreServices/backupd[602]: No pre-backup thinning needed: 504.7 MB requested (including padding), 165.05 GB available
    Nov 18 12:45:26 rjosse-iMac-Intel /System/Library/CoreServices/backupd[602]: Copied 919 files (11.4 MB) from volume Machiavel.
    Nov 18 12:45:26 rjosse-iMac-Intel /System/Library/CoreServices/backupd[602]: Starting post-backup thinning
    Nov 18 12:45:26 rjosse-iMac-Intel /System/Library/CoreServices/backupd[602]: No post-back up thinning needed: no expired backups exist
    Nov 18 12:45:26 rjosse-iMac-Intel /System/Library/CoreServices/backupd[602]: Backup completed successfully.
    Nov 18 12:58:18 rjosse-iMac-Intel kernel[0]: IOSCSIPeripheralDeviceType00::setPowerState(0x566e400, 2 -> 4) timed out after 100122 ms
    Nov 18 13:05:05 rjosse-iMac-Intel kernel[0]: IOSCSIPeripheralDeviceType00::setPowerState(0x566e400, 4 -> 3) timed out after 100119 ms
    Nov 18 13:10:05 rjosse-iMac-Intel kernel[0]: IOSCSIPeripheralDeviceType00::setPowerState(0x566e400, 3 -> 2) timed out after 100123 ms
    Nov 18 13:15:05 rjosse-iMac-Intel kernel[0]: IOSCSIPeripheralDeviceType00::setPowerState(0x566e400, 2 -> 1) timed out after 100123 ms
    Nov 18 13:45:17 rjosse-iMac-Intel /System/Library/CoreServices/backupd[655]: Backup requested by automatic scheduler
    Nov 18 13:45:17 rjosse-iMac-Intel /System/Library/CoreServices/backupd[655]: Starting standard backup
    Nov 18 13:46:58 rjosse-iMac-Intel kernel[0]: IOSCSIPeripheralDeviceType00::setPowerState(0x566e400, 1 -> 4) timed out after 100122 ms
    Nov 18 13:53:38 rjosse-iMac-Intel kernel[0]: IOSCSIPeripheralDeviceType00::setPowerState(0x566e400, 4 -> 3) timed out after 100127 ms
    Nov 18 13:58:38 rjosse-iMac-Intel kernel[0]: IOSCSIPeripheralDeviceType00::setPowerState(0x566e400, 3 -> 2) timed out after 100122 ms
    Nov 18 14:03:38 rjosse-iMac-Intel kernel[0]: IOSCSIPeripheralDeviceType00::setPowerState(0x566e400, 2 -> 1) timed out after 100123 ms
    Nov 18 14:09:52 rjosse-iMac-Intel kernel[0]: IOSCSIPeripheralDeviceType00::setPowerState(0x566e400, 1 -> 4) timed out after 100123 ms
    Nov 18 14:16:33 rjosse-iMac-Intel kernel[0]: IOSCSIPeripheralDeviceType00::setPowerState(0x566e400, 4 -> 3) timed out after 100123 ms
    Nov 18 14:21:33 rjosse-iMac-Intel kernel[0]: IOSCSIPeripheralDeviceType00::setPowerState(0x566e400, 3 -> 2) timed out after 100121 ms
    Nov 18 14:25:10 rjosse-iMac-Intel kernel[0]: IOSCSIPeripheralDeviceType00::setPowerState(0x566e400, 2 -> 1) timed out after 100123 ms
    Nov 18 14:40:23 rjosse-iMac-Intel diskarbitrationd[47]: Snapz Pro X [117]:30211 not responding.
    Nov 18 14:40:23 rjosse-iMac-Intel diskarbitrationd[47]: loginwindow [38]:16159 not responding.
    Nov 18 14:40:23 rjosse-iMac-Intel diskarbitrationd[47]: mds [37]:14595 not responding.
    Nov 18 14:40:23 rjosse-iMac-Intel diskarbitrationd[47]: fseventsd [43]:13059 not responding.
    Nov 18 14:40:27 rjosse-iMac-Intel mds[37]: (Error) LSOF: File '/Volumes/Aristotle' (fd=8) left open on device 234881029
    Nov 18 14:40:27 rjosse-iMac-Intel mds[37]: (Error) LSOF: File '/Volumes/Aristotle/.Spotlight-V100/Store-V1/Stores/EE68148A-EF55-4E6D-B3C2-2EC 10582235E/0.indexGroups' (fd=14) left open on device 234881029
    Nov 18 14:40:27 rjosse-iMac-Intel mds[37]: (Error) LSOF: File '/Volumes/Aristotle/.Spotlight-V100/Store-V1/Stores/EE68148A-EF55-4E6D-B3C2-2EC 10582235E/0.indexIds' (fd=16) left open on device 234881029
    Nov 18 14:40:27 rjosse-iMac-Intel mds[37]: (Error) LSOF: File '/Volumes/Aristotle/.Spotlight-V100/Store-V1/Stores/EE68148A-EF55-4E6D-B3C2-2EC 10582235E/0.indexHead' (fd=17) left open on device 234881029
    Nov 18 14:40:27 rjosse-iMac-Intel mds[37]: (Error) LSOF: File '/Volumes/Aristotle/.Spotlight-V100/Store-V1/Stores/EE68148A-EF55-4E6D-B3C2-2EC 10582235E/0.indexPostings' (fd=18) left open on device 234881029
    Nov 18 14:40:27 rjosse-iMac-Intel mds[37]: (Error) LSOF: File '/Volumes/Aristotle/.Spotlight-V100/Store-V1/Stores/EE68148A-EF55-4E6D-B3C2-2EC 10582235E/0.indexPositions' (fd=19) left open on device 234881029
    Nov 18 14:40:27 rjosse-iMac-Intel mds[37]: (Error) LSOF: File '/Volumes/Aristotle/.Spotlight-V100/Store-V1/Stores/EE68148A-EF55-4E6D-B3C2-2EC 10582235E/0.indexDirectory' (fd=20) left open on device 234881029
    Nov 18 14:40:27 rjosse-iMac-Intel mds[37]: (Error) LSOF: File '/Volumes/Aristotle/.Spotlight-V100/Store-V1/Stores/EE68148A-EF55-4E6D-B3C2-2EC 10582235E/live.0.indexGroups' (fd=21) left open on device 234881029
    Nov 18 14:40:27 rjosse-iMac-Intel mds[37]: (Error) LSOF: File '/Volumes/Aristotle/.Spotlight-V100/Store-V1/Stores/EE68148A-EF55-4E6D-B3C2-2EC 10582235E/live.0.indexIds' (fd=25) left open on device 234881029
    Nov 18 14:40:27 rjosse-iMac-Intel mds[37]: (Error) LSOF: File '/Volumes/Aristotle/.Spotlight-V100/Store-V1/Stores/EE68148A-EF55-4E6D-B3C2-2EC 10582235E/journalAttr.183' (fd=26) left open on device 234881029
    Nov 18 14:40:27 rjosse-iMac-Intel mds[37]: (Error) LSOF: File '/Volumes/Aristotle/Backups.backupdb' (fd=27) left open on device 234881029
    Nov 18 14:40:27 rjosse-iMac-Intel mds[37]: (Error) LSOF: File '/Volumes/Aristotle/.Spotlight-V100/Store-V1/Stores/329E6119-D3C1-41DF-B404-4A2 C2B8DA6C6/indexState' (fd=28) left open on device 234881029
    Nov 18 14:40:27 rjosse-iMac-Intel mds[37]: (Error) LSOF: File '/Volumes/Aristotle/.Spotlight-V100/Store-V1/Stores/EE68148A-EF55-4E6D-B3C2-2EC 10582235E/0.indexCompactDirectory' (fd=29) left open on device 234881029
    Nov 18 14:41:06 rjosse-iMac-Intel /System/Library/CoreServices/coreservicesd[61]: SFLSharePointsEntry::CreateDSRecord: dsCreateRecordAndOpen(Christelle Geiger's Public Folder) returned -14135
    Nov 18 14:41:06 rjosse-iMac-Intel /System/Library/CoreServices/coreservicesd[61]: SFLSharePointsEntry::CreateDSRecord: dsCreateRecordAndOpen(Raphael Josse's Public Folder) returned -14135
    Nov 18 14:42:04 rjosse-iMac-Intel [0x0-0x44044].com.apple.Safari[460]: [460] http://abonnes.lemonde.fr/web/sequence/0,2-3208,1-0,0.html line 460: TypeError: Null value
    Nov 18 14:42:04 rjosse-iMac-Intel [0x0-0x44044].com.apple.Safari[460]: Unsafe JavaScript attempt to access frame with URL http://interfacelift.com/icons-mac/ from frame with URL http://pagead2.googlesyndication.com/pagead/ads?client=ca-pub-3902458398606385&d t=1195379025621&alternatead_url=http%3A%2F%2Fads.interfacelift.com%2Flocal%2Fvc_728x90.html&prev_fmts=728 x90_as%2C728x15_0ads_al_s&format=728x90_as&output=html&correlator=1195379025621& channel=5424080503&url=http%3A%2F%2Finterfacelift.com%2Ficons-mac%2F&color_bg=e4 e4e4&color_text=000000&color_link=0000FF&color_url=0000CC&color_border=e4e4e4&ad _type=text_image&cc=99&ga_vid=1910858155.1190116221&ga_sid=1195379024&ga_hid=572 641411&ga_fc=true&flash=9&u_h=1200&u_w=1920&u_ah=1127&u_aw=1920&u_cd=24&u_tz=60& u_his=1&u_java=true&u_nplug=14&unmime=168. Domains, protocols and ports must match.
    Nov 18 14:42:09: --- last message repeated 1 time ---
    Nov 18 14:42:04 rjosse-iMac-Intel [0x0-0x44044].com.apple.Safari[460]: Unsafe JavaScript attempt to access frame with URL http://interfacelift.com/wallpaper/index.php?sort=date from frame with URL http://pagead2.googlesyndication.com/pagead/ads?client=ca-pub-3902458398606385&d t=1195379027911&alternatead_url=http%3A%2F%2Fads.interfacelift.com%2Flocal%2Fvc_728x90.html&prev_fmts=728 x90_as%2C728x90_as%2C728x15_0ads_al_s&format=728x90_as&output=html&correlator=11 95379027911&channel=5424080503&url=http%3A%2F%2Finterfacelift.com%2Fwallpaper%2F index.php%3Fsort%3Ddate&color_bg=e4e4e4&color_text=000000&color_link=0000FF&colo r_url=0000CC&color_border=e4e4e4&ad_type=text_image&ref=http%3A%2F%2Finterfaceli ft.com%2Ficons-mac%2F&cc=99&ga_vid=1910858155.1190116221&ga_sid=1195379024&ga_hi d=881176033&ga_fc=true&flash=9&u_h=1200&u_w=1920&u_ah=1127&u_aw=1920&u_cd=24&u_t z=60&u_his=2&u_java=true&u_nplug=14&unmime=168. Domains, protocols and ports must match.
    Nov 18 14:42:09: --- last message repeated 1 time ---
    Nov 18 14:42:04 rjosse-iMac-Intel [0x0-0x44044].com.apple.Safari[460]: Unsafe JavaScript attempt to access frame with URL http://interfacelift.com/wallpaper/index.php?sort=date from frame with URL http://pagead2.googlesyndication.com/pagead/ads?client=ca-pub-3902458398606385&d t=1195379030801&alternatead_url=http%3A%2F%2Finterfacelift.com%2Finc%2Fads%2Frmxdirect_120x600.html&forma t=120x600_as&output=html&correlator=1195379030801&channel=7199947456&url=http%3A %2F%2Finterfacelift.com%2Fwallpaper%2Findex.php%3Fsort%3Ddate&color_bg=E4E4E4&co lor_text=000000&color_link=0000DD&color_url=EE0000&color_border=E4E4E4&ad_type=t ext_image&ga_vid=1910858155.1190116221&ga_sid=1195379024&ga_hid=424116187&ga_fc= true&flash=9&u_h=1200&u_w=1920&u_ah=1127&u_aw=1920&u_cd=24&u_tz=60&u_his=2&u_jav a=true&u_nplug=14&unmime=168. Domains, protocols and ports must match.
    Nov 18 14:42:23: --- last message repeated 1 time ---
    Nov 18 14:42:11 rjosse-iMac-Intel [0x0-0x1e01e].com.microsoft.DatabaseDaemon[144]: monitor: taskforpid failed (os/kern) failure
    Nov 18 14:42:23 rjosse-iMac-Intel com.apple.launchd[79] (0x10cd80.Locum[722]): Exited: Terminated
    Nov 18 14:42:28 rjosse-iMac-Intel Disk Utility[723]: ********
    Nov 18 14:42:28 rjosse-iMac-Intel Disk Utility[723]: Disk Utility started.
    Disk Utility is then locked up, and I force the computer to shut down.
    *Console log extract after forced restart* :
    Nov 18 14:45:38 localhost kernel[0]: npvhash=4095
    Nov 18 14:45:34 localhost com.apple.launchctl.System[2]: fsck_hfs: Volume is journaled. No checking performed.
    Nov 18 14:45:34 localhost com.apple.launchctl.System[2]: fsck_hfs: Use the -f option to force checking.
    Nov 18 14:45:37 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/chum.plist
    Nov 18 14:45:37 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
    Nov 18 14:45:37 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/pilotfish.plist
    Nov 18 14:45:37 localhost com.apple.launchd[1] (com.apple.distccdConfigd): Unknown key: SHAuthorizationRight
    Nov 18 14:45:37 localhost com.apple.launchd[1] (org.cups.cups-lpd): Unknown key: SHAuthorizationRight
    Nov 18 14:45:37 localhost com.apple.launchd[1] (org.cups.cupsd): Unknown key: SHAuthorizationRight
    Nov 18 14:45:37 localhost com.apple.launchd[1] (org.ntp.ntpd): Unknown key: SHAuthorizationRight
    Nov 18 14:45:38 localhost DirectoryService[11]: Launched version 5.0 (v514)
    Nov 18 14:45:39 localhost kernel[0]: hi mem tramps at 0xffe00000
    Nov 18 14:45:38 localhost DirectoryService[11]: WARNING - dsTouch: file was asked to be opened </Library/Preferences/DirectoryService/.DSIsRunning>: (File exists)
    Nov 18 14:45:39 localhost kernel[0]: PAE enabled
    Nov 18 14:45:39 localhost kextd[10]: 406 cached, 0 uncached personalities to catalog
    Nov 18 14:45:39 localhost kernel[0]: 64 bit mode enabled
    Nov 18 14:45:39 localhost kernel[0]: Darwin Kernel Version 9.1.0: Wed Oct 31 17:46:22 PDT 2007; root:xnu-1228.0.2~1/RELEASE_I386
    Nov 18 14:45:39 localhost kernel[0]: standard timeslicing quantum is 10000 us
    Nov 18 14:45:39 localhost kernel[0]: vmpagebootstrap: 770909 free pages and 15523 wired pages
    Nov 18 14:45:39 localhost kernel[0]: migtable_maxdispl = 79
    Nov 18 14:45:39 localhost kernel[0]: 101 prelinked modules
    Nov 18 14:45:40 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
    Nov 18 14:45:40 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
    Nov 18 14:45:40 localhost kernel[0]: Loading security extension com.apple.security.TMSafetyNet
    Nov 18 14:45:40 localhost kernel[0]: calling mpopolicyinit for TMSafetyNet
    Nov 18 14:45:40 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    Nov 18 14:45:40 localhost kernel[0]: Loading security extension com.apple.nke.applicationfirewall
    Nov 18 14:45:40 localhost kernel[0]: Loading security extension com.apple.security.seatbelt
    Nov 18 14:45:40 localhost kernel[0]: calling mpopolicyinit for mb
    Nov 18 14:45:40 localhost kernel[0]: Seatbelt MACF policy initialized
    Nov 18 14:45:40 localhost kernel[0]: Security policy loaded: Seatbelt Policy (mb)
    Nov 18 14:45:40 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    Nov 18 14:45:40 localhost kernel[0]: The Regents of the University of California. All rights reserved.
    Nov 18 14:45:39 localhost mDNSResponder mDNSResponder-164 (Nov 4 2007 13:23:04)[17]: starting
    Nov 18 14:45:40 localhost kernel[0]: MAC Framework successfully initialized
    Nov 18 14:45:40 localhost kernel[0]: using 15728 buffer headers and 4096 cluster IO buffer headers
    Nov 18 14:45:40 localhost kernel[0]: devfsmakenode: not ready for devices!
    Nov 18 14:45:40 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
    Nov 18 14:45:40 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
    Nov 18 14:45:40 localhost kernel[0]: mbinit: done
    Nov 18 14:45:40 localhost kernel[0]: Security auditing service present
    Nov 18 14:45:40 localhost kernel[0]: BSM auditing present
    Nov 18 14:45:40 localhost kernel[0]: rooting via boot-uuid from /chosen: 3BE69CB3-F529-3692-9254-BF5682D3F1EB
    Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT0@0 /IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDrive r/WDC WD3200AAJS-40RYA0 Media/IOGUIDPartitionScheme/AppleHFS_Untitled1@2
    Nov 18 14:45:40 rjosse-iMac-Intel configd[14]: setting hostname to "rjosse-iMac-Intel.local"
    Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: BSD root: disk0s2, major 14, minor 2
    Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: jnl: unknown-dev: replay_journal: from: 18105344 to: 25136640 (joffset 0x8650000)
    Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 001cb3fffe7fdb1e; max speed s800.
    Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: CSRHIDTransitionDriver::start []
    Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: CSRHIDTransitionDriver::switchToHCIMode legacy
    Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: USBF: 2.378 CSRHIDTransitionDriver[0x5672e00](IOUSBCompositeDevice) GetFullConfigDescriptor(0) returned NULL
    Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: CSRHIDTransitionDriver... done
    Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: E:[AppleUSBBluetoothHCIController][FindInterfaces] mInt0InterruptMaxPacketSize = 16
    Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: jnl: unknown-dev: journal replay done.
    Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: HFS: Removed 2 orphaned unlinked files or directories
    Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: Jettisoning kernel linker.
    Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: Resetting IOCatalogue.
    Nov 18 14:45:40 rjosse-iMac-Intel mDNSResponder[17]: SetDomainSecrets: mDNSKeychainGetSecrets failed error 0 CFArrayRef 00000000
    Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: Matching service count = 0
    Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: Matching service count = 0
    Nov 18 14:45:40: --- last message repeated 4 times ---
    Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: wl0: Broadcom BCM4328 802.11 Wireless Controller
    Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: 4.170.25.8.2yukon: Ethernet address 00:1b:63:96:3a:de
    Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: AirPort_Brcm43xx: Ethernet address 00:1c:b3:77:77:d8
    Nov 18 14:45:41 rjosse-iMac-Intel fseventsd[41]: event logs in /.fseventsd out of sync with volume. destroying old logs. (52617 17 52672)
    Nov 18 14:45:46 rjosse-iMac-Intel kernel[0]: AppleYukon2 - en0 link active, 100-Mbit, full duplex, symmetric flow control enabled port 0
    Nov 18 14:45:46 rjosse-iMac-Intel com.apple.launchd[1] (com.apple.distccdConfigd[44]): Exited with exit code: 255
    Nov 18 14:45:46 rjosse-iMac-Intel /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[36]: Login Window Application Started
    Nov 18 14:45:46 rjosse-iMac-Intel org.ntp.ntpd[27]: Error : nodename nor servname provided, or not known
    Nov 18 14:45:46 rjosse-iMac-Intel configd[14]: AppleTalk startup
    Nov 18 14:45:42 rjosse-iMac-Intel bootlog[48]: BOOT_TIME: 1195393524 0
    Nov 18 14:45:46 rjosse-iMac-Intel ntpdate[58]: can't find host time.apple.com
    Nov 18 14:45:45 rjosse-iMac-Intel blued[49]: Apple Bluetooth daemon started.
    Nov 18 14:45:46 rjosse-iMac-Intel rpc.statd[33]: statd.notify - no notifications needed
    Nov 18 14:45:47 rjosse-iMac-Intel ntpdate[58]: no servers can be used, exiting
    Nov 18 14:45:47 rjosse-iMac-Intel fseventsd[41]: log dir: /.fseventsd getting new uuid: D113BE4C-EACE-44B4-A5C1-32140ED4714A
    Nov 18 14:45:47 rjosse-iMac-Intel /usr/sbin/ocspd[66]: starting
    Nov 18 14:45:51 rjosse-iMac-Intel kextd[10]: writing kernel link data to /var/run/mach.sym
    Nov 18 14:45:52 rjosse-iMac-Intel configd[14]: AppleTalk startup complete
    Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]: disk0s2: memory allocation error.
    Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]:
    Nov 18 14:46:03: --- last message repeated 1 time ---
    Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]: disk0s2: memory allocation error.
    Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]:
    Nov 18 14:46:03: --- last message repeated 1 time ---
    Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]: disk0s2: memory allocation error.
    Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]:
    Nov 18 14:46:03: --- last message repeated 1 time ---
    Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]: disk0s2: memory allocation error.
    Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]:
    Nov 18 14:46:03: --- last message repeated 1 time ---
    Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]: disk0s2: memory allocation error.
    Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]:
    Nov 18 14:46:03: --- last message repeated 1 time ---
    Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]: disk0s2: memory allocation error.
    Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]:
    Nov 18 14:46:03: --- last message repeated 1 time ---
    Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]: disk0s2: memory allocation error.
    Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]:
    Nov 18 14:46:03: --- last message repeated 1 time ---
    Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]: disk0s2: memory allocation error.
    Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]:
    Nov 18 14:46:06: --- last message repeated 1 time ---
    Nov 18 14:46:06 rjosse-iMac-Intel loginwindow[36]: Login Window Started Security Agent
    Nov 18 14:46:07 rjosse-iMac-Intel authorizationhost[81]: MechanismInvoke 0x127320 retainCount 2
    Nov 18 14:46:07 rjosse-iMac-Intel SecurityAgent[82]: MechanismInvoke 0x12a370 retainCount 1
    Nov 18 14:46:07 rjosse-iMac-Intel SecurityAgent[82]: MechanismDestroy 0x12a370 retainCount 1
    Nov 18 14:46:07 rjosse-iMac-Intel loginwindow[36]: Login Window - Returned from Security Agent
    Nov 18 14:46:07 rjosse-iMac-Intel authorizationhost[81]: MechanismDestroy 0x127320 retainCount 2
    Nov 18 14:46:07 rjosse-iMac-Intel loginwindow[36]: USER_PROCESS: 36 console
    Nov 18 14:46:07 rjosse-iMac-Intel com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[77]): Exited: Terminated
    Nov 18 14:46:07 rjosse-iMac-Intel com.apple.launchctl.Aqua[86]: launchctl: Please convert the following to launchd: /etc/machinit_peruser.d/RemoteUI.plist
    Nov 18 14:46:08 rjosse-iMac-Intel /System/Library/CoreServices/coreservicesd[60]: SFLSharePointsEntry::CreateDSRecord: dsCreateRecordAndOpen(Christelle Geiger's Public Folder) returned -14135
    Nov 18 14:46:08 rjosse-iMac-Intel /System/Library/CoreServices/coreservicesd[60]: SFLSharePointsEntry::CreateDSRecord: dsCreateRecordAndOpen(Raphael Josse's Public Folder) returned -14135
    Nov 18 14:46:09 rjosse-iMac-Intel /System/Library/CoreServices/SystemUIServer.app/Contents/MacOS/SystemUIServer[9 6]: CPSGetProcessInfo(): This call is deprecated and should not be called anymore.
    Nov 18 14:46:09 rjosse-iMac-Intel /System/Library/CoreServices/SystemUIServer.app/Contents/MacOS/SystemUIServer[9 6]: CPSPBGetProcessInfo(): This call is deprecated and should not be called anymore.
    Nov 18 14:46:11 rjosse-iMac-Intel /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder[98]: CPSGetProcessInfo(): This call is deprecated and should not be called anymore.
    Nov 18 14:46:11 rjosse-iMac-Intel /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder[98]: CPSPBGetProcessInfo(): This call is deprecated and should not be called anymore.
    Nov 18 14:46:11 rjosse-iMac-Intel MagicMenuHotKeyDaemon[115]: Started
    Nov 18 14:46:11 rjosse-iMac-Intel [0x0-0x11011].com.stuffit.MagicMenu[111]: 2007-11-18 14:46:11.155 MagicMenuHotKeyDaemon[115:10b] Started
    Nov 18 14:46:14 rjosse-iMac-Intel /Applications/Snapz Pro X/Snapz Pro X.app/Contents/MacOS/Snapz Pro X[113]: CPSPostKillRequest(): This call is deprecated and should not be called anymore.
    Nov 18 14:46:14 rjosse-iMac-Intel com.apple.launchd[83] ([0x0-0x8008].com.apple.systemuiserver[96]): Exited: Terminated
    Nov 18 14:46:14 rjosse-iMac-Intel /System/Library/CoreServices/SystemUIServer.app/Contents/MacOS/SystemUIServer[1 17]: CPSGetProcessInfo(): This call is deprecated and should not be called anymore.
    Nov 18 14:46:14 rjosse-iMac-Intel /System/Library/CoreServices/SystemUIServer.app/Contents/MacOS/SystemUIServer[1 17]: CPSPBGetProcessInfo(): This call is deprecated and should not be called anymore.
    Nov 18 14:46:15 rjosse-iMac-Intel /Applications/Snapz Pro X/Snapz Pro X.app/Contents/MacOS/Snapz Pro X[113]: CPSGetProcessInfo(): This call is deprecated and should not be called anymore.
    Nov 18 14:46:15 rjosse-iMac-Intel /Applications/Snapz Pro X/Snapz Pro X.app/Contents/MacOS/Snapz Pro X[113]: CPSPBGetProcessInfo(): This call is deprecated and should not be called anymore.
    Nov 18 14:47:14 rjosse-iMac-Intel kernel[0]: jnl: disk1s3: replay_journal: from: 3197440 to: 5989888 (joffset 0x952000)
    Nov 18 14:47:15 rjosse-iMac-Intel kernel[0]: jnl: disk1s3: journal replay done.
    Nov 18 14:47:15 rjosse-iMac-Intel fseventsd[41]: event logs in /Volumes/Aristotle/.fseventsd out of sync with volume. destroying old logs. (45648 2 52766)
    Nov 18 14:47:15 rjosse-iMac-Intel fseventsd[41]: log dir: /Volumes/Aristotle/.fseventsd getting new uuid: 3DC60C6C-8E59-425A-A831-5C9FE4025DDC
    Nov 18 14:48:55 rjosse-iMac-Intel Adium[140]: PGBContactTimeZonePlugin Loaded!
    Next backup runs fine after fixing the drive :
    Nov 18 14:49:02 rjosse-iMac-Intel /System/Library/CoreServices/backupd[147]: Backup requested by user
    Nov 18 14:49:02 rjosse-iMac-Intel /System/Library/CoreServices/backupd[147]: Starting standard backup
    Nov 18 14:49:03 rjosse-iMac-Intel /System/Library/CoreServices/backupd[147]: Backing up to: /Volumes/Aristotle/Backups.backupdb
    Nov 18 14:49:04 rjosse-iMac-Intel /System/Library/CoreServices/backupd[147]: Event store UUIDs don't match for volume Machiavel
    Nov 18 14:49:04 rjosse-iMac-Intel /System/Library/CoreServices/backupd[147]: Node requires deep traversal:/ reason:kFSEDBEventFlagMustScanSubDirs|kFSEDBEventFlagReasonEventDBUntrustable|
    Nov 18 14:49:14 rjosse-iMac-Intel [0x0-0x22022].com.microsoft.Entourage[141]: monitor: taskforpid failed (os/kern) failure
    Nov 18 14:49:30 rjosse-iMac-Intel [0x0-0x25025].com.microsoft.entourage.syncservices[150]: monitor: taskforpid failed (os/kern) failure
    Nov 18 14:51:12 rjosse-iMac-Intel ntpd[27]: time reset +0.538285 s
    Nov 18 14:54:46 rjosse-iMac-Intel /usr/sbin/ocspd[158]: starting
    Nov 18 14:58:48 rjosse-iMac-Intel /System/Library/CoreServices/backupd[147]: No pre-backup thinning needed: 768.4 MB requested (including padding), 165.04 GB available
    Nov 18 14:59:25 rjosse-iMac-Intel /System/Library/CoreServices/backupd[147]: Copied 1915 files (231.1 MB) from volume Machiavel.
    Nov 18 14:59:26 rjosse-iMac-Intel /System/Library/CoreServices/backupd[147]: No pre-backup thinning needed: 491.4 MB requested (including padding), 164.80 GB available
    Nov 18 14:59:28 rjosse-iMac-Intel /System/Library/CoreServices/backupd[147]: Copied 1282 files (93 bytes) from volume Machiavel.
    Nov 18 14:59:30 rjosse-iMac-Intel /System/Library/CoreServices/backupd[147]: Starting post-backup thinning
    Nov 18 14:59:33 rjosse-iMac-Intel /System/Library/CoreServices/backupd[147]: Deleted backup /Volumes/Aristotle/Backups.backupdb/rjosse-iMac-Intel/2007-11-17-141141: 164.82 GB now available
    Nov 18 14:59:34 rjosse-iMac-Intel /System/Library/CoreServices/backupd[147]: Deleted backup /Volumes/Aristotle/Backups.backupdb/rjosse-iMac-Intel/2007-11-17-131052: 164.83 GB now available
    Nov 18 14:59:37 rjosse-iMac-Intel /System/Library/CoreServices/backupd[147]: Deleted backup /Volumes/Aristotle/Backups.backupdb/rjosse-iMac-Intel/2007-11-17-124718: 164.85 GB now available
    Nov 18 14:59:37 rjosse-iMac-Intel /System/Library/CoreServices/backupd[147]: Post-back up thinning complete: 3 expired backups removed
    Nov 18 14:59:37 rjosse-iMac-Intel /System/Library/CoreServices/backupd[147]: Backup completed successfully.
    Nov 18 15:04:11 rjosse-iMac-Intel /Applications/Microsoft Office 2004/Microsoft Entourage[141]: Warning: accessing obsolete X509Anchors.
    Raf

    When reading my report, I forgot to mention how the external hard drive is formatted :
    Hard Drive FW/USB:
    Manufacturer: LaCie
    Model: 0x0
    GUID: 0xD04B78070AD64B
    Maximum Speed: Up to 400 Mb/sec
    Connection Speed: Up to 400 Mb/sec
    Sub-units:
    Hard Drive FW/USB Unit:
    Unit Software Version: 0x10483
    Unit Spec ID: 0x609E
    Firmware Revision: 0x110
    Product Revision Level:
    Sub-units:
    Hard Drive FW/USB SBP-LUN:
    Capacity: 298.09 GB
    Removable Media: Yes
    BSD Name: disk1
    Mac OS 9 Drivers: No
    Partition Map Type: APM (Apple Partition Map)
    S.M.A.R.T. status: Not Supported
    Volumes:
    Aristotle:
    Capacity: 297.97 GB
    Available: 164.85 GB
    Writable: Yes
    File System: Journaled HFS+
    BSD Name: disk1s3
    Mount Point: /Volumes/Aristotle
    Raf

  • HT4972 is my Time Machine backup sufficient to reload my iPad2 after Upgrading to IOS 5?

    Is my Time Machine backup acceptable to restore data to my iPad2 after upgrading the OS system to IOS 5?

    Not quite sure what you mean. Time Machine doesn't talk directly to the iPad, so there's no "restore from Time Machine" option when you restore the iPad. When you make a backup in iTunes, that backup is stored in a support folder, and when you restore it, you should see that option appear - but TM is not involved.
    Matt

  • Time Machine Backup on MBA...

    Hey all,
    While I've read about how Time Machine works to wirelessly back up your Mac when Time Capsule is connected wirelessly, I'm unsure how to do this with a wired USB external drive. I've read here to designate the drive as a backup for Time Machine, if the drive isn't plugged in is there a reminder that pops up to remind me to connect and perform a backup? Can the MBA be backed up while asleep with an external HD connected?
    Sly

    slyguy_28 wrote:
    Hey all,
    While I've read about how Time Machine works to wirelessly back up your Mac when Time Capsule is connected wirelessly, I'm unsure how to do this with a wired USB external drive. I've read here to designate the drive as a backup for Time Machine, if the drive isn't plugged in is there a reminder that pops up to remind me to connect and perform a backup?
    If you turn Time Machine ON, it will back up hourly while your Mac is awake and the destination is available. It will send a message after 10 days (I think) without a backup. Personally, I wish that could be set to a smaller value, but as of now, it can't.
    Feel free to request that at: http://www.apple.com/feedback/timemachine.html
    You can always see the date of the last backup, by clicking the TM icon in your Menubar, or looking at the +Time Machine Preferences+ window.
    Can the MBA be backed up while asleep with an external HD connected?
    No. Nothing runs when a Mac is asleep. But TM will do a backup upon wake.

  • Time Machine Backup of external hard drive connected to IMAC

    I have an external hard drive connected to my IMAC. I also have a 2TB Time Capsule connected to my network. I store all of my video (both events and projects from imovie) to the external hard drive to save space on the IMAC. Does the Time Capsule backup this external hard drive? When I open Time Machine I don't see where the external hard drive is backed up? The drive is formatted MAC OS extended (journaled).

    nujac,
    Time Machine backs up all locally attached drives unless you specifically exclude them in System Prefenences > Time Machine > Options.. icon.
    You should be able to see this in Finder, enter TM and highlight the external drive. Click back to a prior date. Sometimes it takes a little while to fully populate the display since it's reading across the network, give it a few minutes.
    Regards,
    Captfred

  • Time Machine backups slow down TC internet connection

    I'm having a problem with my TC internet connection slowing down dramatically. When I connect my DSL modem directly to my Mini, it's fine. When I connect it to the TC there are big slow downs off and on. I'm wondering if the backups done by TM slow down the internet connection and the network as a whole.

    Over ethernet no, it would have almost no effect.. over wireless yes.. it can have a big effect.
    How big are the backups generally? These should only be incremental and relatively small.
    Measure your actual speed of copying a file to the TC.. if you can put numbers to it, that will help. Use the Activity Monitor and see what is the average speed copying a file or when TM is backing up.
    Any improvements to the wireless speed will reduce the time the backup runs and how much time your internet is slow. Wireless is highly range and signal dependent. You might find a network rearrangement where you use the TC close to the Mini can solve the issue.. especially if you can connect to it by ethernet.. and then wireless bridge if you need to.

  • Time Machine Backup is slow (perhaps corrupt?) after Mountain Lion upgrade

    Hello!
    I managed to download and upgrade from Lion to Mountain Lion yesterday. Before the upgrade, I performed a backup via TM just in case. Now, in Mountain Lion, the backup prepares and begins around 12GB of backups but never gets passed 2MB of data transferred. The TM logo keeps turning, the external HDD is clicking and the activity light is blinking to indicate communication.
    I vaguely remember having a slow backup after upgrading from Snow Leopard to Lion, but never *this* slow.
    Has anyone else encountered a similar issue or know of any diags I could do? As a prerequisite to this, I have attempted to verify the disk in Disk Utility but it seemed to be taking a long time (around 2 hours without completion) to verify, too.
    Thanks =]

    I am also experiencing very slow backups since upgrading to ML.  You didn't go into specifics on your hardware setup (type of machine, backup drive, etc).
    I'm using a MB air (Mid 2011) with a Thunderbolt display.  I have a G-Tech 2 gig external drive connected with Firewire 800 through the Thunderbolt display.
    My backups had always been pretty quick.  Now they can take up to half an hour or longer depending on the amount of data to be processed.
    One suggestion for you is to obtain a time machine log viewer.  I use "logviewer for time machine" that I got in the Mac App store.  I think it is $0.99, but there other apps that are available for free.  This is nothing more than a log viewer that you refresh and see each step of your backup including any errors.  A lot better than right clicking the spinning circle around the clock in the menu bar for status updates.
    I am baffled on why the slowdown.  I am think of opening a case with Apple Support.
    Take care

  • First time machine backup from MacBook Pro 13" (early 2011) on time capsule is extremely slow - unusable!

    I recently bought a Time Capsule 2TB.
    First I set it up to create a new wifi network parallel to my existing wifi network. The first Time Machine backup on my MBP 13 connected via ethernet cable finished overnight (under 10 hrs for about 150 GB), as expected.
    Then I found that my MBP was logging into my old network more often than to the time capsule network so that backups were not being made regularly. So I re-configured the Time Capsule to extend the exisitng network - all fine. Except that now Time Machine said it couldn't find the existing backup. After trying logging out and in, etc. I eventually deleted that sparsebundle to force Time Machine to start again new.
    Now I get an estimated time of 2 - 3 days for the first backup - even via ethernet cable. Sometimes it hangs up and says something like 4000 days... I can't afford to hook my MBP up to the time capsule or even stay at home for this time to let it finish, and I know it should be faster than that!
    I've tried a few of the tips I found so far in the forums, such as excluding my home folder from Spotlight, or even turning Spotlight off, but nothing has helped so far. Perhaps I missed some important step on the way.
    Can anyone give me a reliable step by tep method to solve this problem. I don't want a geeky workaround, I want to plug in (o better, be in my wifi network) and make the backup work like Time Machine is supposed to do it. And I would like to keep on using Spotlight, too.
    Thanks in advance!
    Robin

    Unless you have a desktop Mac you can back up to over your network, your choices are:
    Spend a bunch on a Time Capsule, kind of a waste if you already have a wireless router.
    Spend $100 or so on an external HD and have some inconvenience until Iomega updates.
    Risk losing all your data.
    It's your call, but a no-brainer to me. 
    Better:  get a portable external.  Once you get the Iomega working, start making regular "clones" to the portable and take it off-site so you're also protected against fire, flood, theft, etc.

  • Time Machine backup to a HD on another Mac on my network?

    _The short story_:
    I want my MacBook Pro Time Machine backup drive to be one connected to my G5. The MacBook and G5 are connected via my wired network. I have file sharing turned on and can access it, with read and write permissions, but Time Machine can't find it. How do I browse for it and select it?
    _The Long story_:
    I was out of town for 8 months, during which time I bought a MacBook Pro (OS 10.6.2). I also purchased an OWC 1.5TB HD which I connected directly to the MacBook via Firewire 800 and used it for Time Machine backups. Cake.
    Now I am home, where my trusty old G5 resides. The G5 is at OS 10.5.8. The MacBook and G5 are both on my wired network.
    I connected the new OWC 1.5TB drive to the G5 via Firewire 800. I can see this drive from my MacBook via file sharing, can read and write to it, etc, but when I go to "Select Backup Disk" in Time Machine on the MacBook, no drives show up. If I right-click on the Time Machine icon and select "Browse Other Time Machine Disks", there is nothing there either.
    Essentially, I just need to find that same drive which is now connected to another networked Mac.
    The only user account I have on each machine is just a single Admin account. Does it have something to do with creating a new account on the G5?
    Since the drive in question is connected to the G5, it seems like the G5 is the gateway (for lack of a better term) for my MacBook to get to that drive. I just don't know how to make that happen, since when browsing in Time Machine for backup drives, you can't select a networked computer and then drill down to a specific drive.

    I was hoping to find a way to automatically mount the OWC drive on the desktop of my MacBook, so on the MacBook I selected "Go" in Finder and chose "Connect to Server". I selected my G5 and was then able to drill down to the OWC drive. That brought up a Finder window that allowed me to access everything on the G5. I guess that is just basic file sharing via my network.
    I had a feeling that would allow Time Machine on the MacBook to use that drive, and it did. However, when I selected "Back Up Now", it appears to create a new backup, not just the usual incremental backup that you get after the first time you use Time Machine.
    I am closer, but clearly don't have the full solution. I was hoping Time Machine would see that drive as the same one it had been using (since it is), but obviously it wants to start a backup from scratch, so to speak.
    Ideas?

  • Any way to restore iTunes and iPhoto libraries from failed Time Machine backup?

    Is there a way to restore iTunes and iPhoto libraries from an unmountable Time Machine backup?
    Background: I received an update alert on my iMac (mid-2010, 1TB) from Time Machine (wirelessly connected to a Time Capsule, 2TB 2013)  that it required an update and required rebooting, of course, it happened when I was in the middle of a project and I postponed the restart for later.  That evening I turned off the computer and coincidentally the next morning, the iMac would not start; it loaded to the Apple logo and about an 1/8 of the progress bar would load before the iMac would turn off.
    The iMac had been fine to that day (OS upgrades and all since 2010) so I was assuming something misfired when I declined the Time Machine update. I tried the PRAM and SMC resets mentioned in the forums but no dice. I then went into Disk Utility to try repairs and there were errors on the hard drive that could not be fixed. My next step was to erase the drive and restore from my Time Machine backup. Before doing that I checked Disk Utility and to my horror,  it told me that my Time Machine backups were unmountable so of course my first thought was that all my files were gone.
    The TC was under warranty so I called support and they referred me to the local Genius Bar. The Genius was great and showed me that my files weren't lost even though the Time Machine backup was unmountable. They recommended I erase the partitions, starting from scratch and I would have to transfer the Time Machine backup files manually by directly connecting an ethernet cable from the TC to the computer. If that didn't work, the hard drive was bad and needed replacement which they could take care of.
    I followed their recommendation and the hard drive is fine. I was so relieved to hear that my files were safe that I forgot to ask about all of the metadata that was lost in iTunes (de-selected songs, playlists, rankings, play counts) and iPhoto (geotags, names, etc). Any ideas / help? I sank considerable time into my music and photos and would love to have that time back.
    FWIW, I'm in the process of buying an external hard drive as a secondary backup to the TC as my confidence is a little shaken on the product line - the first time I ever actually need a backup and the backup is unmountable. My whole point of spending a little more and buying into the Apple ecosystem for a backup solution was to streamline the backup process and avoid these types of issues.

    Thank you for the reply. I tried the Disk Utility to repair my TC's Time Machine backup disk with no luck, it stopped with the message:
    Disk utility stopped repairing "iMac"
    Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
    It took a night but I was able to copy all the TC Time Machine files to the external hard drive as a backup to a backup just in case. I'm still pretty bummed the TC's backup didn't allow for Disk Utility's restore functionality. Fortunately, the iPhoto library backup I dragged to the iMac from the Time Capsule backup worked without a hitch. On the downside, the "iTunes Library.itl" backup I dragged over is locked so now I'm checking out the forums for any ways to fix that. I temporarily created a new iTunes library with all my apps and music but plan on reverting to the old iTunes library if possible so I can start syncing my iOS devices again.

  • Time Machine: Backup Disk Not Available

    I realize there are a few topics floating around about this issue, but I'm still not finding a solution. Not sure if my situation is different than the others but figured I'd take a shot a describing my scenario in a new thread and seeing if it generates any new ideas.
    I have a 2TB Seagate external expansion drive connected to a MacMini on my home network. The drive is formatted as Mac OS Extended (Journaled) and is not partitioned.
    I have mounted the drive on my MacBook Pro 2.66/i7 running 10.6.6. I then go to the TM Preference pane and select the drive, enter the username and password for my admin account on the Mini. It indicates that it's preparing and then comes back a minute later with a Time Machine error indicating that the backup drive is not available.
    I have an older MacBook Pro, my sons MacBook, and my wife's Macbook also on the network. Each of these Macs can mount the backup drive, select it in the TM Preference pane and successfully begin and maintain the TM backup.
    I have created a second "test" account on my MacBook Pro. I have followed the same steps and have had no problems with time machine preparing and successfully beginning the back up account.
    So - with those facts - I have had to conclude that there is something amiss with my main account.
    Other steps I have taken on my MBP with my main account include:
    * Deleting the com.timemachine.plist file from /Library/Preferences - restarting and trying again. No luck.
    * Restarting into applejack and performing an "applejack auto restart". No luck
    * Removing all timemachine related entries in the Keychain, running Keychain FirstAid. No luck.
    * Reformatting the external drive on the Mini, repairing permissions and running a disk repair and starting all over again. No luck.
    In each case above a restart was done before attempting to reinitiate the TM process.
    So - with out blabbering on with any more details, I think it's clear that I'm at a bit of a loss as to what else I should try. I'm WIDE open to suggestions.

    I resolved this issue just this morning (see below). This may not (or may) apply to your situation because yours magically corrected itself, but hopefully it will help somebody.
    Environment Architecture: We appear to have a very similar system architecture to the one you describe. In my case, we have 4 macs all relying on Time Machine and a networked 1TB Time Capsule for backups. Each of 3 workstation macs share data from the 4th, which we use as a primary server. I ran into my problem when the Time Capsule filled up and stopped backing up our primary server due to lack of available space. All recommended solutions for freeing up space appeared time consuming, and because we do daily off-site backups through MOZY (we use Time Machine for simplicity of recovery for hourly backups) I could take the "easier" path of just reformatting the Time Capsule's data drive and start again fresh.
    Problem identified: Per instructions, I used Airport Utility to erase my Time Capsule data drive, but thought I'd check my existing settings while I was there. Seeing the password prompt, and not remembering for sure what my password was, I thought I'd just reset it to what I wanted. Seemed benign at the time. When I started my 1st system's backup, I was prompted for the Time Capsule's password, and entered the new password. It accepted it as it should have, but then rejected the backup with a message indicating that I had provided the incorrect network account and password. The odd part was that it had originally accepted it, and even flashed the available space on the Time Machine preferences window. After much searching through these topics, I discovered that the password is stored multiple times -- some correctly and some not. Correcting the passwords fixed the problems.
    Where to look:
    http://support.apple.com/kb/TS2048
    Mac OS X 10.5.3 or later: Time Machine - "Backup volume could not be mounted" after changing network volume's password
    * Last Modified: October 14, 2008
    * Article: TS2048
    As it turns out, Apple stores that password in multiple places in your Keychain (don't ask me why!), even using the identical Keychain entry name. All I can presume is that one piece of the software looked in one Keychain entry, and another looked in a different Keychain entry. The passwords were different (one was my original password, and one was my new password). Once I changed them to the same thing on each of my satellite stations, they all worked again and Time Machine is happily chugging along on all workstations.

  • Can I Update Time Machine Backup Without Booting From The Source Drive

    Greetings,
    Can I update a time machine backup without booting from the original source drive?
    My main Macbook Pro internal drive seemed to have died. I had not backed up in months so my Time Machine backup was old.
    I replaced the drive with a new one and settled for restoring from the old TM backup because my latest info was on the dead drive and not backed up.
    I just plugged the "broken" drive into a dock and it mounted.
    It won't boot from the drive but I can mount it and copy from it so far.
    I now want to update my Time Machine backup with the info on the 'broken" drive while it's able to be mounted.
    How can I accomplish this without booting from the 'broken" drive and running time machine.
    Recap...
    I need to update a Time Machine backup using another hard drive without booting from the source (as I cannot). Both drives are connected via USB to my MBP and I am booted from another MBP. I want to end up with the newer info from the "broken" drive updating my older Time Machine backup.
    Thank You,
    SG

    Hi
    Time Machine will only be able to backup whilst booted into OSX, so unless you can mount the drive, and boot up the OS that is installed on the disk, then no, you will not be able to run a Time Machine backup of that drive.
    You could image the drive onto another using Disk Utility
    Cheers

Maybe you are looking for

  • Bex transport  in SAP BW 3.1

    Hello everybody, how do you organize Bex transport in SAP BW? In our installation, we find it necessary that some queries need to be designed in development system and tested before transport in production. We would like the person who's creating the

  • What's New in Time Capsule firmware 7.4.1 upgrade from 7.3.2?

    Is it worth upgrading the firmware on my home and work Time Capsules to the latest 7.4.1? What's new or known to be better in it?

  • Unwanted line in DW when adding a Flash item...Help!

    Guys/Gals When I try to put a movie item in my Dreamweaver page, an additional line appears underneath - that I do not want. See this page: http://perryautolaval.com/autoaboutfr.php right under the flash banner, a grey lines appears. It should look l

  • Data Driven EMail Subscription in SQL Server Reporting Services...

    Hi,    I have a clarification in SQL Server Reporting Services Data Driven Subscription. We have a request to send an email a report based on the report parameter Site . The request is to send email For each site the report is running, email should s

  • No native resolution of 1366x768 in gnome resolution manager..

    I kinda have a problem..My computer's monitor is an acer monitor and its configured right in the xserver (Brand name and everything recognized) but in the gnome monitor manager it does not give me a resolution of 1366x768 which is my monitors native