Time Machine backup onto a new harddrive.

Hi! I am trying to get my backup material from Time Machine onto my new harddrive. The problem is that i do not have the installation disk for Leopard so I cannot access the utilities menu as stated on other forums of "how to's." I live in Cambodia, so do not have easy access at the moment to MAC users and help! Can someone please give me an easy explanation for getting all of my data off Time Machine onto this new one? Again, i do not have the installation disk for leopard...thanks!

Hi thanks- so my computer originally did not come with Leopard. When my system crashed, the computer shop here installed leopard onto it. Thus the reason why i do not have the disk. I have tried the migration assistant, followed the steps, but it appears that nothing happened. so....
1. none of my files or anything actually came off the time machine onto my new computer. ???
2. Also- it appears that i have "lost" all itunes music... any thoughts/ideas on this? I have tried to ask the "mac" provider here in town, but he does not know either...
hope this makes sense!
Anything else you can help me with will be greatly appreciated!!!

Similar Messages

  • I used migration assn't to load a Time Machine backup onto a new mac.  The first TM backup after that took some time, perhaps not surprising.  But the backups thereafter have all taken hours, with huge amounts of "indexing" time.  Time to reload TM?

    I used migration assn't to load a Time Machine backup onto a new mac.  The first TM backup after that took some time, perhaps not surprising.  But the backups thereafter have all taken hours, with huge amounts of "indexing" time.  Time to reload TM?

    Does every backup require lots of indexing?  If so, the index may be damaged.
    Try Repairing the backups, per #A5 in Time Machine - Troubleshooting.
    If that doesn't help, see the pink box in #D2 of the same link.

  • Unable to restore time machine backup onto a new hard drive

    I recently bought a new hard drive for my mid-2010 white Macbook. I have kept this computer regularly backed up with time machine, but just to be sure I made sure I hooked up my external hard drive prior to changing the hard drive and made sure it was fully backed up. I checked my exceptions and saw that my system files and applications were listed, so I removed them from the exceptions list and let it back up again (it only backed up a further 60MB though, so that made me a little uneasy).
    I successfully switched over the hard drive and then plugged in my external hard drive so I could do a restore from Time Machine. My external hard drive has 3 partitions: 2 time machine backups for each of my computers, and one partition for storing files that also has an old copy of 10.6 on it.
    When I booted the computer, I held option, then selected Macbook TM. When it came to the window with 4 options, including disk utility and restore from time machine backup, I selected restore from Time Machine backup. When I did so it said "No OS X Backups Were Found." Why wouldn't it have backups listed if I have been consistently backing it up? How else do I do a full system backup?
    Also, how can I be sure that I'm restoring this backup onto the new hard drive? It didn't prompt me to select that drive at any point, and I want to make sure I'm not overwriting the middle partition on the backup drive (or anything else).

    Please visit Pondini's Time Machine FAQ for help with all things Time Machine.
    You will find that Mountain Lion stores an invisible copy of the Recovery HD. You can boot from your Time Machine backup drive by restarting with OPTION boot:
    Boot Using OPTION key:
      1. Restart the computer.
      2. Immediately after the chime press and hold down the "OPTION" key.
      3. Release the key when the boot manager appears.
      4. Select the disk icon for your Time Machine backup drive.
      5. Click on the arrow button below the icon.
    Your computer should boot into the Recovery HD. You will be presented with a main window of options. Select the option to restore from a Time Machine backup then click on the Continue button.

  • Copy Time Machine Backup Folder to new harddrive

    Is it possible to copy your Backup Folder on an existing Time Machine drive to a new larger drive and then designate the new larger drive as the Time Machine destination? Tried twice and getting copy errors.

    I don't believe drag and drop will properly copy your files over. Can you use the Restore feature in Disk Utility to clone the contents over? If not, try CarbonCopyCloner.

  • I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the b.u. stops

    I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the backup stops. The system preferences are set to "Never" for Computer sleep and Display sleep. The computer does not ordinarily log off automatically, but it has done this twice since I started the Time Machine backup.

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
    If all you see are messages that contain the word "Starting," you didn't clear the search box.
    If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Some personal information, such as the names of your files, may be included — anonymize before posting.

  • How Can I Migrate My Time Machine Backups To A New External Hard Drive?

    I have a external hard drive that has 500 GBs left, but I want to buy a larger drive.

    ivan wrote:
    How Can I Migrate My Time Machine Backups To A New External Hard Drive?
    I have a external hard drive that has 500 GBs left, but I want to buy a larger drive.
    Hi iVain
    Fire up *Disk Utility*, click the Restore tab, then drag your old and new TM drives into the Source and Destination fields. Click Restore, and a complete copy of your old TM files will be made on the new drive. Go to TM preferences and select the new drive, and it will continue backing up just as it left off.
    Hope this answers your question. See:
    http://discussions.apple.com/thread.jspa?threadID=2595485&tstart=0

  • I am running my first time machine backup onto a Western Digital MyBook Live.  It is taking forever.  Is there antivirus software running in the background or any other settings I need to change to speed it up?  Also I am on a wireless network.

    I am running my first time machine backup onto a Western Digital MyBook Live.  It is taking forever.  Is there antivirus software running in the background or any other settings I need to change to speed it up?  Also I am on a wireless network.

    The initial Time Machine backup can certainly take a long time over wireless. Days, possibly. It's impossible for anyone here to be able to predict how long it will take, and wireless environmental conditions can change at any time.
    Is there antivirus software running in the background
    Only you can determine that. If you're using third party AV software, anything is possible.
    NAS devices may not be compatible with Time Machine, regardless of what their manufacturers may claim. Even after the Time Machine backup completes, your backup may be unreliable. You may not discover that until you need to rely upon the backup for some reason, and corruption can occur months or years from now.
    Time Machine supports the following backup configurations:
    A locally mounted volume
    Time Capsule
    A volume resident on a USB hard disk connected directly to a Time Capsule or current production AirPort Extreme Base Station.
    That's it. Any configuration other than the above list places you in an experimental category. If your backup fails, you're on your own.

  • How does one SUCCESSFULLY transfer Time-Machine backup to a new (larger) hard disk drive using OSX 10.5.8

    I have read a number of articles about how to transfer a complete Time-Machine backup to a new (larger) hard disk-drive.  Some of these articles are specifically for OSX10.6 users, which are not applicable to me since I am operating with OSX 10.5.8.
    However, I have tried several times to use the Disk Utility 'Restore' function, dragging my old time-machine volume into the 'Source:' box and my new volume into the 'Destination:' box.  This works, of sorts, BUT the newly created volume on the new larger hard disk-drive remains the same size as the original volume on the old Time-Machine HDD, with no apparent way of increasing the new volume's size.  So I am not really any better off:
    E.g. the total capacity of my new HDD is stated by 'Disk Utility' to be 465.8 GB, of which I'm told 228.2 GB is used for the Backups.backdb folder, but only 4.6 GB of free space is actually available.  Yet under the 'Partition' tab of 'Disk Utility' it tells me that there is still 236.4 GB of available space.
    Does anyone know how to resolve this issue without upgrading to OSX 10.6?

    First, how did you prepare your new drive?  See:
    Drive Preparation
    1.  Open Disk Utility in your Utilities folder.  If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    If you plan to partition this new drive then be sure you create a larger partition for TM than your old volume.
    Next, clone your old TM volume:
    Clone using Restore Option of Disk Utility
    1. Open Disk Utility from the Utilities folder.
    2. Select the destination volume from the left side list.
    3. Click on the Restore tab in the DU main window.
    4.Check the box labeled Erase destination.
    5. Select the destination volume from the left side list and drag it to the Destination entry field.
    6. Select the source volume from the left side list and drag it to the Source entry field.
    7. Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.

  • Can I still use my "old" Mac after restoring Time Machine backup to a new Mac?

    Hi guys.
    Will I still be able to use my old Macbook Pro 2008 (Leopard) after restoring his latest Time Machine backup on a new Macbook Pro 2012 (Lion)?
    Using Setup Assistant and transfering data using Time Machine creats the same Account on the new machine that was on the old one. I just don't know how the old machine will react towards his clone. I don't want to make a mess...
    Please let me know.
    Thanks

    It should work if the drive is connected directly to your Mac. That is not the same as saying that it will work.
    Since Mountain Lion was just released, it might make sense to hold on a few weeks and watch the forums for new and unforeseen issues before you dive in.

  • Can I transfer a Time Machine backup to a new empty hard drive, without installing Mountain Lion again?

    Can I transfer a Time Machine backup to a new empty hard drive, without installing Mountain Lion on that new hard drive?

    Yes - I just did it the other night. Took five hours, but it finally finished and is working great.
    I sort of followed the instructions found here -->> http://pondini.org/TM/18.html.
    Also, if you want to have dual backups, see -->>
    http://pondini.org/TM/27.html.
    I say 'sort of' because I used Carbon Copy Cloner to do a block-level transfer. I just didn't want to get hung up with a Finder copy.
    Give CCC a try - you have to enable the block copy in Preferences before using this method, but I was quite happy with it. I used it to move over 1TB of TM backups from a FireWire 800 drive to a 2TB Thunderbolt drive. 5 seconds short of taking 5 hours.
    It should work well for you.
    Clinton

  • Transfer Time Machine backups to a new drive

    Is there an automated or an easy way to transfer my current Time Machine back ups to the new Time Capsule (I am sure I will inevitably buy it]. Looks like a great system for notebook users but I wouldn't like to start again with time Machine I like having the security of back ups I have already accrued. My current drive is certainly not full and won't be for a while.

    So far not very many people have had much success in copying their Time Machine backups to a new drive although the Restore option in Disk Utility ought to be able to do this. However, SuperDuper will support that capability when their new Leopard compatible version is released which should be in a week or so.
    http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
    http://www.shirt-pocket.com/blog/

  • HT201250 when restoring a time machine backup to a new computer, does it affect the new operating system on the new computer

    when restoring a time machine backup to a new computer, does it affect the new operating system on the new computer?

    That depends on how you do it.
    By far the best, easiest, most reliable method is to use Setup Assistant when your shiny new Mac first starts up, to transfer your apps, users, data, etc.   That doesn't disturb either the OS or basic Apple apps that came with the new Mac.  See Using Setup Assistant on Mountain Lion or Lion.
    There is a facility to restore an entire system from Time Machine backups, including the version of OSX on the backup, but that's for use when your internal HD has been erased or replaced only.  It's not a good idea to restore the full backup of one Mac to a different one.  Depending on the circumstances, the installer may not allow it.  Even if it does, the Mac may not start up, or may kernel panic, or not work properly.

  • How do I access an old Time machine backup from my new MBP?

    I wanted to access my Time Machine Backup from a new MBP. Time machine recognized my backup drive but could not find my Backup file. What's wrong here? I use another Login name on my new MBP - could that be the reason?

    Take a look on this page at item #17:
    http://web.me.com/pondini/Time_Machine/FAQ.html

  • HT201250 existing Time Machine backups to a new Mac

    how do i migrate existing time machine backups to a new mac from my time capsule?

    It took a little more research, but that link in the end solved my problem.  After mounting the Time Capsule and the previous backup sparsebundle, I ran these commands to inherit the old backup (with <capsule> and <machine> representing the names of the Time Capsule and machine/hard drive respectively:
              sudo tmutil inheritbackup /Volumes/<capsule>/<machine>.sparsebundle
              sudo tmutil associatedisk -a / /Volumes/Time\ Machine\ Backups/Backups.backupdb/<machine>/2012-12-09-114511/<machine>
              sudo tmutil setdestination /Volumes/<capsule>/
    "2012-12-09-114511" was the latest snapshot that was there.  According to the documentation, you can pick any snapshot, since the "-a" in that command will update all of the associated snapshots.

  • Issues with restoring a Time Machine backup onto new Macbook Pro Retina

    I recently got a new Macbook Pro Retina and I've been trying to restore a Time Machine backup made today from my old Macbook Pro laptop. I didn't restore from the first start up (foolishly, seemingly) simply because of the trivial reason of wanting to see the system all clean and new.
    I've tried the Migration Assistant but it gets stuck on "looking for source..", despite having the ex.HD plugged in and double checking the existance of the backup itself on the ex.HD.
    I've also tried booting the laptop up in the 'restore' mode (cmd R) and restoring from there but it sends me in a constant loop of 'this backup was from a previous model of laptop' or something to that affect. It also doesn't display the recent backups at all, only displaying those from the beginning of this year for some reason. All backups are in the same place on the ex.HD so its not an issue with locating the backups.
    Really stuck on this one! Would really appreciate some help!
    Thanks a lot, and merry Christmas

    Yes, you can restore to another machine if needs be.

Maybe you are looking for

  • Frequent lock ups

    I am almost at my wits end with my MAC. When it is running right, it is wonderful. When it's not, its very frustrating. Shortly I will be contacting Apple AGAIN to try and resolve the problem. this has been going on for about 5 months, and it is alwa

  • Table and Fields Required

    Dear Guru's, We are trying to build a project profitability report for which we are unable to find the tables for, 1. Planned Revenue 2. Actual Revenue 3. Budget 4. Actual Cost In our case we are using sales contract as sales document. I am not able

  • Are there a dynamic way for evaluting variables in as3?

    Hi..! eval() is a usefull method or function in javascript.. Because we may define our variables via dynamic way..! There are following code is for understanding that how can define dynamic defining variables in javascript.. And Are there a dynamic w

  • In IE I was able to raise site icons on the screen for quick site access but that facility does not seem to be available on Firefox

    When I used IE if I was on an internet site and wanted to keep the icon on my desktop for easier future reference all I had to do was Click File Click 'send to' Then choose 'desktop' and the icon for the site was on screen for easy access. I have jus

  • Iweb/podcast question

    I created a podcast using Audacity. i forgot to put the artist name in the id3 tag. now when i go to iTunes the artist name says UNKNOWN. Who do i change this? i used iweb to make my website, and used the podcast page to post my podcast. the RSS feed