Time Machine Backup Options with old powerbook

I'm looking for some suggestions on the following. I have two computers running Leopard, my wifes iMac and my Macbook. I have an older powerbook (running tiger) that jumped out of an airplane, bounced hard, and rattled its monitor hard enough to be unviewable. I can, however, connect to it and control it via Chicken of the VNC.
What I would like to do is unclutter my wifes workspace by removing the 2 external HD's connected to the iMac, connect them to the powerbook and run our Time Machine backups through the powerbook onto the external harddrives.
How can I connect and use those drives with Time Machine if the powerbook is running Tiger, not Leopard?
If that isn't doable, what other options are there to make those hard drives mountable over a network?
Is there any other way to keep those hard drives out of sight while still running our backups to them?
Thanks for your help,
-JJ

Even with an 802.11n wireless card you will have to change your wireless router to one that also supports 802.11n. Every element of your home network will have to support 802.11n in order to use it. If the router doesn't support it then the network will default to 802.11g. 802.11n has a throughput rate of about 140 Mbits/sec which is only a little faster than 100BT Ethernet. Still quite slow. Not even as fast as USB 2.0 which is slower than FW400 in this type of use.
Frankly, if you can't use Gigabit Ethernet then I don't think you will be very pleased with using networked backup or storage.
The better option is to connect an external Firewire drive to each computer and use TM or third-party backup software. Use FW800 if the computers have a FW800 port. You can always use wireless for file sharing between the computers. Put the Pismo in the closet.
That's my opinion.

Similar Messages

How can I use the Time Machine Backups from my Old Computer?

I have two months of Time Machine backups made using my old Macintosh computer which died and I no longer have. I have now purchased a new computer and am trying to use the Time Machine back ups from the original computer, but it will not recognise them. How can I get my new MacBook Pro to use the Time Machine Backups from my old Computer? I phoned the Apple help line and they said I cannot use them and would have to delete them. This sounds crazy if you can only use the Time Machine back up file with one computer and have to delete it when you buy a new Mac. Surely there must be some way to transfer ownership (not files) from an old to the new Mac?
Thanks
Richard

Thanks Kevin for the suggestion posted on MacOSXHints how to "Repair Time Machine after logic board changes".
http://www.macosxhints.com/article.php?story=20080128003716101
It seems as though I am not alone with my frustration with the way Time Machine uses the MAC address of a computer to tell one system from another. This means that if you have your Mac repaired with a new logic board, or replace your system with a new one, you can't resume backups where you left off. Reading through the readers who used the fix using Terminal, it appears that the fix does not always work. I contacted Apple again, but they were no help. Surely Apple should come out with a solution as more and more people use Time Machine/Time Capsule.
It is CRAZY that after a change computers or a switch in the computer logic board that you cannot resume your Time Machine back ups.

How can I restore files from my old iMac to this new purchased MacBook Air? I am using time machine backup in my old imac.

How can I restore files from my old iMac to this new purchased MacBook Air? I am using time machine backup in my old imac.

Hi,
Try Target Disk Mode
OS X Yosemite: Transfer files between two computers using target disk mode
There is also Migration Assistant.
OS X Yosemite: Transfer your info from a computer or storage device

Just bought a used MacBook pro after my previous died. I want to migrate my applications, data, etc from a time machine backup of the old computer to the new. Will this affect, or overwrite the Apps., data, etc existing on the new machine?

Just bought a used MacBook pro after my previous died. I want to migrate my applications, data, etc from a time machine backup of the old computer to the new. Will this affect, or overwrite the Apps., data, etc existing on the new machine?

No. Only those Apps that are not installed on the new will migrate over.

IMovie Time Machine backup of my old Macbook Pro

Hi, I have a Time Machine backup of my old Macbook Pro. I need to edit one of the iMovie movies from the back up. How can I import all the data from my old iMovie to my new macbook Pro so I can edit it?

What version of iMovie were you using on you old machine?
What versions of iMovie do you have on your new machine?
Do you still have access to your old machine?
Assuming you were using iMovie 9 you need to copy over two folders called "iMovie Projects" and "iMovie Events" and put them at the root level of an external hard disk or in <user name> / Movies. However you need to open these in iMovie 9.
Geoff.

I need to backup my mails from a time machine backup disk from a powerbook leopard to an IMac snow Leopard...can I do this?

Hi everybody...
I need to backup my complete history of emails. I have a time machine backup disk I used in a powerbook intel, second generation with Leopard OS. Now I have an Imac of 24 inches, with Snow Leopard OS. Can I use that backup disk (TM) to put the mails that used to be in the powerbook into my IMac?
My original powerbook is broken, so I cant do anything there...

You should be able to find and restore emails that were on the old Mac via Time Machine. Emails that were on the server, not the Mac, won't be there, of course.
See the blue box in #15 of Time Machine - Frequently Asked Questions.

Deleting time machine backup files from old time machine disk

I have an external USB HD that USED to be my Time Machine backup disk. I have replaced it with a newer FW HD and use the old one for archiving files, disk images, etc. The old disk still had 100gigs of backup files on it from time machine. To free up space, I thought I'd drag a few months of backups off the old dick into the trash. This worked. But I can't empty the trash. When I go to put the backup folders BACk on the USB disk, I get an error. So they are stuck in the trash.
Any help? Thanks.

I have always understood that there is no need to delete backup files from Time Machine. Once it reaches 'full' it begins to delete them sequentially of its own accord.
Good policy to check out Pondini's comments.
http://pondini.org/TM/Troubleshooting.htm
Or type Pondini into Google for a broader selection of his offerings.

I just moved iPhoto (9.6) library to EHD from my MBP. I had been running time machine backups. With the library now on an EHD, will time machine run a seamless backup next time i connect (if i allow TM to see other drives)?

I have MBP 2012 running Yosemite and iPhoto 9.6. I run Time machine backups daily.
I just moved iPhoto library to EHD and removed the iPhoto library on MBP. I have enabled external drives to be accessed on TM. The next time i run a TM backup with the EHD connected, will TM run a seamless backup or will it not like the fact that a backup is now spread across two devices where it used to be on only one?

By default EHDs are excluded for TM backups - you have to go to the TM preferences ==> options and remove them from the excluded list
And you need two disks connected -one for your iPhoto library and one for the TM backup - TM will backup all hard drives that ar not excluded - you do not need multiple TM backup disks
LN

Time Machine:Backup failed with error: 11

All of a sudden this weekend my Time Machine backup stopped working. I just installed a new Time Capsule about 2 months ago and was backing up with no problems until now. When the backup starts it runs for a few minutes, then throws the following error:
So I ran Disk Utility on the Time Capsule and I got this:
Verifying volume “Time Machine Backups”
Checking file systemChecking Journaled HFS Plus volume.
Detected a case-sensitive volume.
Checking extents overflow file.
Checking catalog file.
Checking multi-linked files.
Checking catalog hierarchy.
Checking extended attributes file.
Checking multi-linked directories.
Incorrect number of directory hard links
Checking volume bitmap.
Checking volume information.
The volume Time Machine Backups was found corrupt and needs to be repaired.
Error: This disk needs to be repaired. Click Repair Disk.
My question is this, if I run Repair Disk on my Time Capsule, am I going to lose all the data on there? Granted, I'd be punting 2 months worth of backups, which isn't the worst thing in the world, but if there is any way to save the data I'd prefer that option.

You have to repair to get the data to copy off.. generally.
But you can try to copy beforehand.. plug in a USB drive of adequate size and archive off the current backups.. you do this via the v5 utility.. apple simply left it out of v6.
That means you have to install v5 on Mountain Lion do it thusly.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
If the file doesn't copy that is half-expected as it is corrupt.
Run the repair.
Do the archive if you want.. of the repaired backup.
Now do an erase of the TC.. I would recommend a one pass erase which will take several hours as it has to low level format the drive. Any errors means the drive is no longer to be trusted. Take it back to apple and say the drive is corrupt.. that isn't good enough and you want a new one.

Limiting Time Machine backup Size with WD MyBookLive and 10.8

I cannot take credit for the any part of this solution; merely for merging and clarifying how the solutions discovered by 2 Apple Support Communities contributors much smarter than I (namely “Pondini” – Florida and “himynameismarek”) - worked perfectly for my situation. All cudo’s to these two!
I have about average or better PC skills, but am an absolute newbie with Apple. This week I got a new iMac. Having a number of home PC’s all sharing files and back up space on a Western Digital MyBookLive (“WD MBL”) 3TB network drive (NAS), naturally I wanted to use it to backup the new Mac rather than rushing out to buy an Apple Time Capsule.
There are hundreds of threads on limiting size of a Time Machine (“TM”) backup, many of which required entries in “Terminal” or were devised on older versions of OSX. I’m running OSX Mountain Lion 10.8, so was concerned they may not work.
The issues I wanted to resolve were:
Time Machine will use up all of the space on my WD MBL if left to it’s own devices.
The WD MBL is compatible with Mac and PC’s… which is good… but unlike a back up in Windows 7 Pro which will allow you to make backups in a mapped “share” you create yourself, Apple TM Backups will not; they end up in a hidden folder on the NAS (much like PC backups done with WD Smartware)
At first I thought maybe I could limit the size of a share created in the MBL, but not possible, at least not that I've seen and I have searched for days.
The solutions:
First make sure you have the latest firmware for the WD MBL as of today it is MyBookLive 02.11.09-053. From what I’ve read Western Digital fixed the compatibility issues with 10.8 Mountain Lion just recently.
Next you need to start TM so that it starts to create a back up. You can stop the back up once you see files being copied. Do this before you walk thru the video tutorial by my Marek below. WD MBL will create the hidden folder you need to find for TM Backups. This folder is called “TimeMachine” but it is not visible even in the “MBL_NAME-backup” folder in Finder.
Open safari and type “ afp://xxx.xxx.x.xxx ” but use your own ip address of your MBL. Mine was 192.168.1.120, yours will be different.
It will ask how you want to connect. CHOOSE AS A GUEST even if your MBL is protected… I’m not sure why it works but it does. Then a window will come up asking which share you’d like to mount. You will see all of your own shares plus one called software and now one called “TimeMachine”. Choose that one.
Now in “Finder” you will see a mounted shared item called “YOUR_MBL_NAME-“ (the same as the one that is probably already there but with a dash(-) at the end). You’ll also see a new “device” in the device list called “Time Machine Backups” (If you already have watched the video tutorial by Marek, you’d know you are looking for a file called “YOUR_MACHINE_NAME.sparsebundle”. Well if you browse the folder “Backups.backupdb” in the Time Machine Backups device you won’t find it… again I don’t know why but you won’t. It resides in the hidden folder called “TimeMachine” that is now visible in the thing you just mounted in step 4)
NOW watch this video tutorial http://youtu.be/Nq7mSizqUSI and follow it step by step.
Voila... issues resolved. Thank you Pondini and Marek!

Try Use Terminal to limit Time Machine sparcebundle size on timecapsule,
should work to limit Time Machine backup size on any NAS or external disk (or not...)
sudo defaults write /Library/Preferences/com.apple.TimeMachine MaxSize 500000
to return to ilimited
sudo defaults delete /Library/Preferences/com.apple.TimeMachine MaxSize
if you want to reclame deleted files space shrink it use
hdiutil resize -size 500g -shrinkonly /Volumes/TimeMachineYOURNAME/YOURNAME.sparsebundle/
Regards

Disk Repair notified me it could not repair the HD. Iam to reformat the disk and restore backed up files. OS Utilities give me a "Restore From Time Machine Backup" option. I have not reformatted the disk; does this restore option do both?

Disk Repair reported that it could not repair the HD Disk. I am to reformat the disk and restore backed up files. OSX Utilities give me a choice of restoring from time machine backup (which I have on MyPassport) but no information on reformatting the disk, which I assume I have to do first. How do I reformat the HD ...or does the restore from Time Machine do both things?

Boot OS X Recovery and use Disk Utility.
If Disk Utility reported the disk cannot be repaired though, you should replace it with a new one.

How do I copy a time machine backup onto my old computer after I've replaced the hard drive?

Hi everyone,
I own a MacBook that I purchased in 2009, and it's served me very well since then; the only exception is that the hard drive suffered after I dropped the computer, and I had to replace it last month.
The old hard drive is now useless, and the new one is nearly blank, and I'd like to upload my old Time Machine contents onto my computer without losing some new files I've gained. What's the best way to do it?
Thanks!

Use Migration Assistant to move over the files from the Time Machine backup to the Mac.
Finder > Applications > Utilities > Migration Assistant

Time Machine Backup Problem with OS X 10.9.4

I am having a problem with the Time Machine backup on a MacBook Pro 2.6 running OS X 10.9.4. What is happening is it starts the backup and then gets to a certain point and just freezes indefinitely at that point. (Indefinitely meaning overnight >12 hrs) I deleted the sparsebundle file and restarted the backup and it essentially freezes at the same point. It's like there's a particular file it has an issue with. Is there a way to tell what file it's backing up when it freezes so I can exclude it from the backup. I initially thought it was a Time Capsule and backing up over the network issue. I acquired a USB 3 Seagate drive and tried using it with the same result. So, the issue has nothing to do with the Maverick network "qwerks" I've seen referenced.
My initial backup size is about 250 GB. I've pared that back by excluding the Parallels Virtual Machines on the hard drive and my IPhoto Library. That scales the back up size to about 55 GB.   Before I did the file exclusion it was hanging up at 1.83 GB out of ~250GB. Now it's hanging up at 1.82 GB out of ~55 GB. So it's as if it is reaching some file it has an issue with and stopping.
Any thoughts?

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the word "Starting" (without the quotes.) You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard."
Each message in the log begins with the date and time when it was entered. Note the timestamp of the last "Starting" message that corresponds to the beginning of an an abnormal backup. Now
CLEAR THE WORD "Starting" FROM THE TEXT FIELD
so that all messages are showing, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ If all you see are messages that contain the word "Starting," you didn't clear the text field.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. Don't post more than is requested.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

My Time machine backup fails with an error message

Time machine used to work just fine when I first upgraded to Leopard but now every time it tries to backup I get an Error message "Unable to complete backup. An error occurred while copying files to the backup volume." This occurs while Time Machine is "Preparing". Next hour it starts all over again and does the same thing. I have reformatted the backup drive but still get the error. I'm backing up to a 300g Firewire drive and have used about 207G for the backups.backupdb folder.
An ideas how to resolve this issue?

Here is a list of some TM articles that may help. You can look for more by searching Mac Help from the Finder's Help menu or searching the Knowledge Base from Apple's Support Page.
Time Machine Troubleshooting
Here are several articles to help troubleshoot Time Machine Problems as well as assist in properly setting up Time Machine.
Mac 101- Using Time Machine in Mac OS X 10.5 Leopard
Is Time Machine all you need?
Some advice for those using Time Machine
TidBITS Macs & Mac OS X- Time Machine- The Good, the Bad, and the Missing Features
Mac OS X 10.5- Time Machine backups are not visible
OS X 10.5- Time Machine stops backing up to external disk
10.5- Disable the 'use this disk?' Time Machine dialog
Time Machine tips and troubleshooting
Mac OS X 10.5 Help- Restoring files backed up with Time Machine
OS X 10.5- Using Time Machine and troubleshooting Time Machine issues

Time Machine backups fail with no error message

My Time Machine hasn't successfully completed a backup since 3/19. It starts the backup on schedule, indexes over 2 million objects, goes through the phase of preparing objects, and then just stops. I know that there have been many changes since that time, but it isn't backing them up. Please tell me how to fix this.

I have the same problem - Time Machine fails to backup with no error message - after a brief foray into Mavericks. Each time it tries to backup, TM creates a new folder in the "in progress" directory but fails to complete. Otherwise TM looks normal with no obvious errors. I have several HDDs. I installed Mavericks on an external drive, migrated my data over to it. Booted from it and after a day or two decided I just didn’t' like it and booted from my Snow Leopard partition. All was fine but apparently, I had forgotten to turn OFF Time Machine while booted into Mavericks. Thereafter, Time Machine failed to backup. Here's what I've done and the error logs:
Deleted the NEW directory that Mavericks created on TM
Done a full reset of TM (deleted: /Library/Preferences/com.apple.TimeMachine.plist
Re-entered the exclusions
Rebuilt the directory structure on the boot disc using DiskWarrior
Repaired the TM disc using Disc Utility
Resynced the Spotlight cache on the boot disk
TM also seems not to do a deep traversal since it just stops after checking files to backup.
Here are the error logs from the TM Buddy widget:
Starting standard backup
Error loading /Library/Plug-ins/DiskImages/VirtualPCDiskImagePlugin.bundle/Contents/MacOS/Vir tualPCDiskImagePlugin: dlopen(/Library/Plug-ins/DiskImages/VirtualPCDiskImagePlugin.bundle/Contents/Ma cOS/VirtualPCDiskImagePlugin, 262): no suitable image found. Did find:\n /Library/Plug-ins/DiskImages/VirtualPCDiskImagePlugin.bundle/Contents/MacOS/Vir tualPCDiskImagePlugin: mach-o, but wrong architecture
Cannot find function pointer MacDiskImagePluginFactory for factory 7F1FD83E-6684-11D8-968F-000A957703C0 in CFBundle/CFPlugIn 0x102f00930 </Library/Plug-ins/DiskImages/VirtualPCDiskImagePlugin.bundle> (bundle, not loaded)
Backing up to: /Volumes/Time Machine/Backups.backupdb
Event store UUIDs don't match for volume: Mac Pro Data
Forcing deep traversal on source: "Mac Pro Data" (mount: '/Volumes/Mac Pro Data' fsUUID: B4BEA50F-15B1-34BB-92F1-B7605139B852 eventDBUUID: BA019CB5-8123-4C99-9806-C9593D4EFA34), {1, 1, 1, 0}
Event store UUIDs don't match for volume: Music HDD
Forcing deep traversal on source: "Music HDD" (mount: '/Volumes/Music HDD' fsUUID: FF1EF8F5-30D0-34C0-BC02-ACDB5AD18B3A eventDBUUID: 92A95F63-5F4A-4987-90DB-5444ADF33D40), {1, 1, 1, 0}
Node requires deep traversal:/ reason:must scan subdirs|
Error: Flushing index to disk returned an error: 0
Backup canceled.
I don't know what to do next. Any ideas?
Thanks,
John

Time Machine Backup Options with old powerbook

Similar Messages

Maybe you are looking for