Time Machine backup to my NAS drive (MyBookLive from WD) stopped working after Lion Upgrade

After my upgrade to Lion OS, I noticed that Time Machine backup failed to connect to my MyBookLive WD NAS drive. It was perfectly working while the machine was still on Snow Leopard. This is the error I am getting.
"The network backup disk does not support the required AFP features.
Open Time Machine preferences to select a different backup disk."
Any help with workaround would be greatly aprreciated. Thx for your help and support.

OK I ran into issues. I'm doing the play by play on Q18 for copying a locally connected backup to a network connected backup - so I start the backup with the backup disk connected to the TC and then stop it when the XXX of YYY copied shows up. I disconnect and connect the disk directly. The problem is I don't seem to have permission to mount the sparsebundle:
So I get info and click the lock and enter my admin password and change the everyone from no access to read and write. Then I try to open the sparsebundle and I get:
So I did that twice with the same effect. Then I noticed I can mount the sparsebundle if I leave it connected to the time capsule. So its mounted - good. Then I go into disk utility and try to erase the mounted "time machine backups" drive and it didn't like that much - I wish I took a screenshot but I didn't. It basically said I can't do that.
So now I don't know what to do. I'm currently starting a backup set fresh and this time letting it run to completion however I excluded my entire user account so the backup size is only 25 GB. When it finishes then maybe I can move the disk local and go in and see if I can mount the partition and erase the contents and copy over my backup file into the sparsebundle.
So does anyone know why I can't access that sparsebundle the way Pondini says I should be able to? Any suggestions? If my latest attempt doesn't work then I'll just do a full backup and say to heck with my history although that would be unfortunate.

Similar Messages

How to move existent Time Machine backups to a NAS?

Hello everybody
I am not sure if I am posting this discussion in the correct community, so please move it to the right one in case you need.
Currently I am using a 1TB external hard drive to store all my time machine backups. This drive also contains other information (movies, photos etc). I bought a Western Digital MyBook World Edition II which is a NAS. I want it to move my Time Machine backups to my NAS. How can I do it? Just copy over the backups folder from the external hard drive to the NAS?
Thank you!
Gilson

That's just crazy slow.
It won't be fast, as the data can't go directly from the old disk to the new one. It must pass through your Mac, so is on the network twice, slowing the effective speed by roughly half. But that's awful.
There could be any number of causes, from bad ports or cables to problems with either drive or controller. I don't have any experience with modern RAID systems, but some of the older ones were extremely slow when there was a problem with one of the drives.
And it may get worse -- if the backups are damaged, the copy will fail and the result won't be useable.
About all I can recommend is the usual: it's always prudent to keep secondary backups. If you don't have any, I'd strongly recommend getting a (plain) external HD and making a "bootable clone" on it ASAP (that will probably slow the copy down somewhat). See Time Machine - Frequently Asked Question #27 for details and some suggestions.
It wouldn't have to be a 2 TB drive, just the same size as your internal HD (or at least 10% larger than the data on it). You might consider getting a portable drive, so you can take it to a secure off-site location once you get your TM backups working to the new WD box. Then update it periodically.

Time Machine Backups on multiple external drives

Hello,
I use time machine to back up to my NAS drive and also to a USB drive. I wish to restore some files and want to use my USB back up as it will be faster. When I go into Time Machine it opens the NAS drive back ups by default. How can I change it to the USB one.
Many thanks for any assistance give.
MacBook Pro (13-inch, Early 2011)
2.3 GHz Intel Core i5
8 GB 1333 MHz DDR3
510GB Flash Hard drive
OSX Yosemite 10.10.1
NAS Drive WDMyCloud 2TB
USB Drive WD My passport 2TB

I think I understand what you want to do and since the backups alternate, if you back up again, that will make the USB backup the most current, so that when you enter Time Machine, that will be the backup you enter. If you go to System Preferences/Time Machine, it will show you what drive was backed up to last.

Can I turn off Macbook while Time Capsule is archiving Time Machine backup to a USB drive?

My Time Capsule is archiving my Time Machine backup to a USB drive attached to it. I have initiated this process on my macbook (on the same lan with the Time Capsule), on which I am monitoring the archiving progress on the Airport Utility. Still almost a couple of days to go... Can I turn off my Macbook, or will that interrupt the process of archiving?

If LaPastenague is willing to do a "test", then we will all know more.
Opened my big mouth.
The archive is happening.. I turned off the computer it was setup from.. running Mavericks and latest utility once I got it started. I have been checking from v6 utility on Mountain Lion.. and it is excruciatingly slow. But is running.
I can check the progress but v6 utility is utterly and completely useless.. it continually shows the same numbers.
v5 utility does show it is crawling along.
v6
20min later..
Look, look, there is a tiny blue fleck in the progress bar!!
v5 utility shows the actual progress. Actually tells you total and amount backed up so far.
Amazing how advanced v5 utility is over v6.
The estimate of 10hours is probably correct at the present rate of progress. I suppose for 500GB, around 50GB/hr is about what we expect from TM backups etc.
I will post another picture in an hour and probably kill it then before I die of watching paint dry.

Errors when transferring my Time Machine backup to an external drive.

Hello,
I need some help transferring my Time Machine backup to an external drive. Let me explain what happened.
I have a Mac OSX Mountain Lion that was upgraded to Mavericks when the upgrade came out. Prior to upgrading, I've been backing up WD Passport Mac with the proprietary software "WD Unlocker on it". It worked flawlessly but after upgrading to Mavericks, I decided to backup and noticed that once i inserted the WD Passport, my screen will flicker, windows will close and reappear.
I decided to read up on this and discovered that Mavericks is not compatible with the "WD Unlocker " program on the Passport drive. Since I already have a backup in place, i decided to restore my computer to factory settings and when I attached the Passport drive with my backup on it, My device will see the backup but it will keep spinning for hours without restoring my backup. I decided to read further on this and I got the same Mavericks compatibility conclusion.
I then copied my entire backups.backupdb folder to my Mac desktop and formatted my WD Passport external drive and got rid of the proprietary software "WD Unlocker".. Once this was completed, I then tried to copy my backups.backupdb folder to my external drive within finder. Each time i tried, i get error messages and permission messages. Even when i changed the permission on the backups.backupdb folder to read & write for everyone, i still get the permissions error.
Please helppppp. I have over 500gb of vital data in my backup.
Thank you.

Since you don't really have a question, I will give you a very broad information source for the next time you have a Time Machine question.
Please visit Pondini's Time Machine FAQ for help with all things Time Machine.
Oh, you cannot use a computer whose only disk drive is the target of a an OS X cloning operation regardless of what software is used for the clone. You can, however, use the source drive except if you try to clone using Disk Utility.

Transfer Time Machine backups to a new drive

Is there an automated or an easy way to transfer my current Time Machine back ups to the new Time Capsule (I am sure I will inevitably buy it]. Looks like a great system for notebook users but I wouldn't like to start again with time Machine I like having the security of back ups I have already accrued. My current drive is certainly not full and won't be for a while.

So far not very many people have had much success in copying their Time Machine backups to a new drive although the Restore option in Disk Utility ought to be able to do this. However, SuperDuper will support that capability when their new Leopard compatible version is released which should be in a week or so.
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
http://www.shirt-pocket.com/blog/

Can Time Machine Backup to Two Different Drives?

I have many Apple Computers, and I was wondering if it were possible to have time machine backup to two different drives.
I want it to back up My documents, Mail, and other files/folders that I access often to a partition of my internal drive every minute.
And
I want it to back up Everything on my Mac to my external each night upon connecting it to my mac.
I take my MacBook everywhere with me and I need to make sure that the files I work on the most stay Perfectly Accessible no matter what, and I don't want to sacrifice too much space for that procedure. I would rather just be able to do constant backups of my most used files and folders, and then do a system backup each night to make sure I always have what is needed.

Let me add some more observations. I use two disks, one at home (its a mounted volume on another Mac at home) and the other is a portable disk that I attach to my MBP at work. This works fine.
About your details - TM backs up every hour. If you look around you'll find some posts that give instructions on changing the frequency (I haven't paid attention to these, so I can't help you). However, backing up to another partition on the same drive is not what I'd recommend. If the drive dies, you may lose both partitions.
As for doing constant backups of the most used files and at night doing a system backup - it seems to me you aren't "getting" TM. This sounds like the type of backup strategy one uses with "regular" backup software. I don't think I'd recommend backups every minute, but for short intervals, why not just do a default backup of everything. It doesn't really back up everything, just things that have changed. The only time it does a complete backup is the first time you use it with a specific drive. After that it no longer does complete backups, unless you reformat the drive and start from scratch.

Does Time Machine backup other external hard drives?

I am using a Seagate 500 GB to backup my data. Will Time Machine backup another external hard drive on which I store my iMovie projects? If so, how do I access them in the Time Machine mode? Thanks in advance.

nachdenki wrote:
strange, my external HDs were added to the exception list automatically. maybe because they wouldn't fit on the time machine volume.
It seems to depend on when the drives were connected. When you first turn Time Machine on, it only excludes the TM drive itself, and any drives not formatted HFS+.
If you connect a drive later on, that drive will be excluded automatically.

Can time-machine backup the boot camp drive?

can time-machine backup the boot camp drive?

can time-machine backup the boot camp drive?
No. Use third-party software such as WinClone to do that.
Time Machine can backup a Windows image file used by an emulator such as Parallels Desktop.
(50538)

Time Machine Backup on a NAS

Hello,
I've recently started using Time Machine to backup my iMac to my external NAS (WD MyBookLive).
The backup was done correctly, however I want to know why can't I find the backup folders & files when I browse the NAS. Instead, the Time Machine backup appears as a separate "mount" among my Devices.
I know the backup is on the NAS, judging by the free space there, but I want to know why I can't locate and browse the folder & files of the backup there (even though I've enabled the hidden folders).
Regards,

http://pondini.org/TM/2.html

Limiting Time Machine backup size onto external drive

I have a 6TB RAID LaCie external drive that I would like to use with Time Machine. My mac has a 1TB HD which is not full. I do not want Time Machine to fill up my external drive with multiple backups. Is there some way to limit how much space Time Machine will use on an external drive? My understanding is that Time Machine will fill up the drive completely, then start overwriting the oldest files.
I do not think that I could partition the drive. But I am not sure how to do that, if it works with mac, and if I can do it now without reformating the drives. I am looking to see if there is a solution on the Time Machine software side.

Try Use Terminal to limit Time Machine sparcebundle size on timecapsule,
should work to limit Time Machine backup size on any NAS or external disk (or not...)
sudo defaults write /Library/Preferences/com.apple.TimeMachine MaxSize500000
to return to ilimited
sudo defaults delete /Library/Preferences/com.apple.TimeMachine MaxSize
if you want to reclame deleted files space shrink it use
hdiutil resize -size 500g -shrinkonly /Volumes/TimeMachineYOURNAME/YOURNAME.sparsebundle/
Regards

Time Machine Backups Not Recognized When Drive Added to Airport Extreme

Since January, I have been taking backups of my Mac Pro with Time Machine and a SimpleTech external drive plugged into a USB port.
Recently, I purchased an Airport Extreme router and decided that plugging the SimpeTech drive into the router would provide access all the times. After plugging the drive into the router and providing the correct password, Voila!, instant access.
Later, when it became time for the next scheduled backup, initially TM could not find the drive. No problem... in TM preferences, the SimpleTech drive was listed as available, and so it was a simple matter to telling TM to use that drive.
So far, so good... but now the issue.
Instead of creating the next incremental backup in the set, Time Machine created a new folder and started taking a full backup of the entire HD as if it were the first backup being taken. Incidentally, the name of the computer in the original backup set was "Ron's Computer". Now, TM says that it is backing up "Ron's Computer 78989018975923789637289795278957928". Obviously, I would like TM to continue taking backups of "Ron's Computer" using the original set of incremental backups.
Have I incorrectly added the drive to the network?
Was there something I failed to do in the TM setup?
I interrupted the full backup assuming that (a) it could not be merged with the original set of incrementals and (b) I would not/should not do so anyway.
Anyone else have this issue? Resolution?

I commented on another thread and came to a surprising revelation:
Time Machine backups are created differently depending on if the target drive is connected locally or if it is connected as a network attached storage (NAS) device.
Your initial backup was via a local HDD. Once connected to your AXBS, TM treats your external HDD as a NAS. Now TM will create a sparsebundle backup which is DIFFERENT than your initial local backup. It cannot add to your first backup even though it's right there on the drive. I believe you can still access the backups (ctrl-click the TM icon -> Browse other TM disks). If the old backup doesn't have too much important info, just continue with the new backup as the wireless backup option is functional. I don't know if the old backup will be deleted without warning if space starts to run out, though.
If you are intent on continuing with the old backup (January is a long time), check out these links (not really for the faint of heart):
http://discussions.apple.com/thread.jspa?messageID=7860904&#7860904
http://rolf.haynberg.de/?p=83
Good luck and welcome to Apple Discussions!

Time machine with WD 1tb NAS drive

Hi,
I have just purchased a 1GB WD NAS drive but I cannot access it from my mac pro via time machine. Is there a way that I can do this or should i return it now and get a refund?
Thanks peeps.

With the exception Time Capsule, Time Machine backup to NAS is not supported. A USB HDD attached to an AirPort Extreme Base Station can work, but isn't officially supported. All others are hacks.

Can I move all data from time machine backup to another external drive & work from it?

Hi all, the harddrive on my macbook died (2nd time in a year) & I had a new one put in that's much smaller than the old one. Can I move everything from my time machine backup onto a seperate external drive and work directly from that on my laptop/imac? At the mo. I don't think time machine will recognise my computer as it's a new drive etc. Thanks Jenny.

What exactly do you want to do?
Is it that you wish to extract an older version of some documents to edit, but leave the original intact?
You can Restore an older version from TM and choose not to replace the current one.
Or, do you wish to install the OS on your new drive, and migrate all the information from the TM backup to the new isntallation?
EDIT: Ok, re-reading your question, I think macjack probably has the right idea.
However, see Pondini's Time Machine FAQ # 16

HT5096 I need to transfer a time machine backup to a new drive. It keeps failing.

I have a 2TB Time Capsule that I was using for Time Machine for both a MacBook and an iMac. The iMac sparse bundle became corrupted earlier this spring and I was unable to delete it, so I need to reformat the TC. First, however, I need to move the TM sparse bundle for the MacBook to a new drive that I have set up just for TM for the MacBook. After reformatting, I plan to only use the TC for the iMac. I tried moving the sparse bundle tonight to the new drive, following directions listed in several places on this site and on Pondini's site. However, it failed. I am going to guess that it failed b/c I was not hooked up to the TC via ethernet. (I was on WIFI). The new backup drive is a 2TB external that was plugged directly to the MacBook. So, now I have connected them via ethernet. I am again reparing the TC volume using Disk Utility, just to make sure all permissions, etc, are ok before moving. Will I be able to move this file to the new drive easily, or should I plug the new drive directly to the Time Capsule and move it that way (while MacBook is connected via Ethernet).
Alternativey, is there a way to just archive that sparse bundle for the MacBook before I erase the drive?
FYI I am still running Snow Leopard on these machines, but trying to clean up the time machine backups today before installing Lion and moving to iCloud, so time is of the utmost importance here.
Thanks so much!
Kat

OK, this has now failed twice. I repaired the drive using DU and there were no problems (even though it took 2 hours to go thru everything to verify). Right now, the MacBook is connected via Ethernet to the TC. The new TM drive (WD 3TB external, USB 3.0/2.0) is attached to the MacBook via USB. I really need to keep this TM backup for the MacBook and also need to erase the TC. How can I accmplish both? I thought that there was a way to archive a TM sparse bundle?

Time Machine backup to my NAS drive (MyBookLive from WD) stopped working after Lion Upgrade

Similar Messages

Maybe you are looking for