Time machine backup wont work anymore:(

My backup wont backup any more, I clicked on the i next to the Failed message, and it said, that the files seem to be in "read only" how do I change it so it will work?
Thanks

See #C6 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum).

Similar Messages

Existing time machine backup wont work when my drive is attached to my airport base station

I did a full time machine backup to my external hard drive via usb (for speed) and then connected the drive to my airport base station. I can see the drive and the backup folder, but time machine wont continue using that backup and just wants to start a new one! Is there anyway I can make the existing backup usable without having to do the whole lot via wifi! I've looked throught communities but had no luck as of yet!

You can't switch from local to network backups. See the blue box in #E2 of Time Machine - Troubleshooting.
And, I hate to have to tell you this, but backing-up to a USB drive on an Airport Exteme is unreliable and not supported by Apple. See: Using Time Machine with an Airport Extreme Air Disk.

Why is Time machine backup not working after Mavericks upgrade?

Why is Time machine backup not working after Mavericks upgrade?

I had the same problem due to the Fire Wire port. Apple tested it told me it is OK!, I tried a new cable, and have tested both ports on my back up device. I find it strange that as soon as I installed Mavericks. The drive does work using USB. It could be a coincidence, I don't absolutely know at this point, my back up drive ports could stop working, but I doubt it!

Time Machine backups only work after restart

Hi
Getting frustrated as Time Machine backups only work after a restart. Work for a few hours and then get stuck with Backing up: XXMB of XXGB. I have left it on this for many hours ie overnight without completion
I have a Mid 2014 MBP 13 in running 10.10.2
I backup onto an external USB via a hub.
Things I have tried with review of Pondini great site which has helped with different TM backup problems.
Disk permissions and repair of SSD on MBP (were errors but did not solve issue)
Direct USB connection
Backup via Airport Extreme
Re-index spotlight
Reformat USB disk
New USB disk!
Below is log (backupd filtered) of latest backup attempts including final completed occuring after restart.
Any help gratefully received
19/03/2015 12:59:07.730 pm
com.apple.prefs.backup.remoteservice[2916]
Attempt to use XPC with a MachService that has HideUntilCheckIn set. This will result in unpredictable behavior: com.apple.backupd.status.xpc
19/03/2015 12:59:10.238 pm
com.apple.xpc.launchd[1]
(com.apple.backupd-auto) Unknown key for Boolean: ForceEnableHack
19/03/2015 12:59:10.240 pm
UserEventAgent[16]
com.apple.backupd-auto launchd job enabled
19/03/2015 12:59:10.238 pm
com.apple.xpc.launchd[1]
(com.apple.backupd-helper.status) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
19/03/2015 12:59:10.239 pm
com.apple.xpc.launchd[1]
(com.apple.backupd-auto) This service is defined to be constantly running and is inherently inefficient.
19/03/2015 12:59:23.162 pm
com.apple.backupd[2929]
Starting manual backup
19/03/2015 12:59:23.358 pm
com.apple.backupd[2929]
Backing up to /dev/disk2s1: /Volumes/TIMEMACH/Backups.backupdb
19/03/2015 1:01:55.000 pm
kernel[0]
process backupd[2929] thread 893245 caught burning CPU!; EXC_RESOURCE supressed due to audio playback
19/03/2015 1:12:00.297 pm
com.apple.backupd[2929]
Will copy (Zero KB) from Macintosh HD
19/03/2015 1:12:00.350 pm
com.apple.backupd[2929]
Found 221479 files (439.9 MB) needing backup
19/03/2015 1:12:01.050 pm
com.apple.backupd[2929]
2.33 GB required (including padding), 554.92 GB available
19/03/2015 1:21:04.659 pm
com.apple.xpc.launchd[1]
(com.apple.backupd-status) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
19/03/2015 1:21:04.659 pm
com.apple.xpc.launchd[1]
(com.apple.backupd.status.xpc) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
19/03/2015 1:21:04.659 pm
com.apple.xpc.launchd[1]
(com.apple.backupd-helper.status) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
19/03/2015 1:21:04.659 pm
com.apple.xpc.launchd[1]
(com.apple.backupd-auto) This service is defined to be constantly running and is inherently inefficient.
19/03/2015 1:21:51.062 pm
com.apple.backupd[167]
Starting manual backup
19/03/2015 1:21:51.380 pm
com.apple.backupd[167]
Backing up to /dev/disk2s1: /Volumes/TIMEMACH/Backups.backupdb
19/03/2015 1:24:40.000 pm
kernel[0]
process backupd[167] thread 7580 caught burning CPU! It used more than 50% CPU (Actual recent usage: 53%) over 180 seconds. thread lifetime cpu usage 90.616005 seconds, (29.940993 user, 60.675012 system) ledger info: balance: 90000913400 credit: 90000913400 debit: 0 limit: 90000000000 (50%) period: 180000000000 time since last refill (ns): 169146762635
19/03/2015 1:24:40.821 pm
spindump[507]
Saved cpu_resource.diag report for backupd version ??? (???) to /Library/Logs/DiagnosticReports/backupd_2015-03-19-132440_David-Henshaw-Work-Ma cbook.cpu_resource.diag
19/03/2015 1:34:29.100 pm
com.apple.backupd[167]
Will copy (Zero KB) from Macintosh HD
19/03/2015 1:34:29.155 pm
com.apple.backupd[167]
Found 221268 files (493.5 MB) needing backup
19/03/2015 1:34:29.235 pm
com.apple.backupd[167]
2.39 GB required (including padding), 554.92 GB available
19/03/2015 1:35:57.393 pm
com.apple.backupd[167]
Copied 5145 items (486.8 MB) from volume Macintosh HD. Linked 21319.
19/03/2015 1:36:33.451 pm
com.apple.backupd[167]
Created new backup: 2015-03-19-133632
19/03/2015 1:36:39.933 pm
com.apple.backupd[167]
Starting post-backup thinning
19/03/2015 1:36:39.943 pm
com.apple.backupd[167]
Error: Error Domain=NSOSStatusErrorDomain Code=-50 "The operation couldn’t be completed. (OSStatus error -50.)" (paramErr: error in user parameter list) deleting backup: /Volumes/TIMEMACH/Backups.backupdb/David Henshaw Work Macbook/2015-03-19-132152.inProgress/2AC908D9-122D-4267-9652-74A9DC6C8795
19/03/2015 1:36:39.944 pm
com.apple.backupd[167]
Error: Error Domain=NSOSStatusErrorDomain Code=-50 "The operation couldn’t be completed. (OSStatus error -50.)" (paramErr: error in user parameter list) deleting backup: /Volumes/TIMEMACH/Backups.backupdb/David Henshaw Work Macbook/2015-03-19-132152.inProgress/A01A1A4C-F424-4F99-9466-6A5F571CE4F5
19/03/2015 1:36:53.268 pm
com.apple.backupd[167]
Deleted /Volumes/TIMEMACH/Backups.backupdb/David Henshaw Work Macbook/2015-03-18-125436 (10.4 MB)
19/03/2015 1:37:05.844 pm
com.apple.backupd[167]
Deleted /Volumes/TIMEMACH/Backups.backupdb/David Henshaw Work Macbook/2015-03-18-115428 (20.6 MB)
19/03/2015 1:37:12.476 pm
com.apple.backupd[167]
Deleted /Volumes/TIMEMACH/Backups.backupdb/David Henshaw Work Macbook/2015-03-18-102131 (1.5 MB)
19/03/2015 1:37:12.476 pm
com.apple.backupd[167]
Post-backup thinning complete: 3 expired backups removed
19/03/2015 1:37:12.495 pm
com.apple.backupd[167]
Backup completed successfully.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(1295 ' 0.5 0.25 50 1000 15 5120 1000 25000 6 6 5 1 0 100 ' 51 25600 4 10 25 5120 102400 1000 25 1536 450 40 500 300 85 25 20480 262144 20 2000 524288 604800 5 1024 25 );k=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts Displays PCI UniversalAccess InstallHistory ConfigurationProfile AirPort 'com\.apple\.' -\\t N\\/A 'AES|atr|udit|msa|dnse|ax|ensh|fami|FileS|fing|ft[pw]|gedC|kdu|etS|is\.|alk|ODSA|otp|htt|pace|pcas|ps-lp|rexe|rlo|rsh|smb|snm|teln|upd-[aw]|uuc|vix|webf' OSBundle{Require,AllowUserLoa}d 'Mb/s:Mb/s:ms/s:KiB/s:%:total:MB:total:lifetime:sampled:per sec' 'Net in:Net out:I/O wait time:I/O requests:CPU usage:Open files:Memory:Mach ports:Energy:Energy:File opens:Forks:Failed forks:System errors' 'tsA|[ST]M[HL]' PlistBuddy{,' 2>&1'}' -c Print' 'Info\.plist' CFBundleIdentifier );f=('\n%s'{': ','\n\n'}'%s\n' '\nRAM details\n%s\n' %s{' ','\n'{"${k[22]}",}}'%s\n' '%.1f GiB: %s\n' '\n    ...and %s more line(s)\n' '\nContents of %s\n    '"${k[22]}"'mod date: %s\n    '"${k[22]}"'checksum: %s\n%s\n' );c=(879294308 4071182229 461455494 216630318 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 2636415542 3694147963 1233118628 2456546649 2806998573 2778718105 842973933 1383871077 1591517921 676087606 1445213025 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 3374894509 1051159591 892310726 1707497389 523110921 2883943871 3873345487 );s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[4]} ' s/:$//;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[9]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of|yc/!{ s/^.+is |\.//g;p;q;} ' ' BEGIN { FS="\f";if(system("A1 42 83 114")) d="^'"${k[21]}"'launch(d\.peruser\.[0-9]+|ctl\.(Aqua|Background|System))$";} { if($2~/[1-9]/) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else if(!d||$1!~d) print $1;} ' ' $1>1{$NF=$NF" x"$1} /\*/{if(!f)f="\n\t* Code injection"} {$1=""} 1;END{print f} ' ' NR==2&&$4<='${p[7]}'{print $4} ' ' BEGIN{FS=":"} ($1~"wir"&&$2>'${p[22]}') {printf("wired %.1f\n",$2/2^18)} ($1~/P.+ts/&&$2>'${p[19]}') {printf("paged %.1f\n",$2/2^18)} ' '/YLD/s/=/ /p' ' { q=$1;$1="";u=$NF;$NF="";gsub(/ +$/,"");print q"\f"$0"\f"u;} ' ' /^ {6}[^ ]/d;s/:$//;/([^ey]|[^n]e):/d;/e: Y/d;s/: Y.+//g;H;${ g;s/ \n (\n)/\1/g;s/\n +(M[^ ]+)[ -~]+/ (\1)/;s/\n$//;/( {8}[^ ].*){2,}/p;} ' 's:^:/:p;' ' !/, .+:/ { print;n++;} END{if(n<'{${p[12]},${p[13]}}')printf("^'"${k[21]}"'.+")} ' '|uniq' ' 1;END { print "/L.+/Scr.+/Templ.+\.app$";print "/L.+/Pri.+\.plugin$";if(NR<'{${p[14]},${p[21]}}') print "^/[Sp].+|'${k[21]}'";} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p;' '&&echo On' '/\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt)$/p' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".","");print $0"$";} END { split("'"${c[*]}"'",c);for(i in c) print "\t"c[i]"$";} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/((iTu|ok).+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt))$/p;' ' BEGIN{ FS="= "} $2 { gsub(/[()"]/,"",$2);print $2;} !/:/&&!$2{print "'${k[23]}'"} ' ' /^\//!d;s/^.{5}//;s/ [^/]+\//: \//p;' '>&-||echo No' '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[2]}'{$2=$2-1;print}' ' BEGIN { M1='${p[16]}';M2='${p[18]}';M3='${p[8]}';M4='${p[3]}';} !/^A/{next};/%/ { getline;if($5<M1) o["CPU"]="CPU: user "$2"%, system "$4"%";next;} $2~/^disk/&&$4>M2 { o[$2]=$2": "$3" ops/s, "$4" blocks/s";next;} $2~/^(en[0-9]|bridg)/ { if(o[$2]) { e=$3+$4+$5+$6;if(e) o[$2]=o[$2]"; errors "e"/s";next;};if($4>M3||$6>M4) o[$2]=$2": in "int($4/1024)", out "int($6/1024)" (KiB/s)";} END { for(i in o) print o[i];} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' BEGIN{FS=": "} /^ {10}O/ {exit} /^ {0,12}[^ ]/ {next} $1~"Ne"&&$2!~/^In/{print} $1~"Si" { split($2,a," ");if(a[1]-a[4]<'${p[5]}') print;};$1~"T"&&$2<'${p[20]}'{print};$1~"Se"&&$2!~"2"{print};' ' BEGIN { FS="\f";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1;} ' ' BEGIN { split("'"${p[1]}"'",m);FS="\f";} $2<=m[$1]{next} $1==9||$1==10 { "ps -c -ouid -p"$4"|sed 1d"|getline $4;} $1<11 { o[$1]=o[$1]"\n    "$3" (UID "int($4)"): "$2;} $1==11&&$5!~"^/dev" { o[$1]=o[$1]"\n    "$3" (UID "$4") => "$5" (status "$6"): "$2;} $1==12&&$5 { "ps -c -ocomm -p"$5"|sed 1d"|getline n;if(n) $5=n;o[$1]=o[$1]"\n    "$5" => "$3" (UID "$4"): "$2;} $1~/1[34]/ { o[$1]=o[$1]"\n    "$3" (UID "$4", error "$5"): "$2;} END { n=split("'"${k[27]}"'",u,":");for(i=n+1;i<n+4;i++)u[i]=u[n];split("'"${k[28]}"'",l,":");for(i=1;i<15;i++) if(o[i])print "\n"l[i]" ("u[i]")\n"o[i];} ' ' /^ {8}[^ ]/{print} ' ' BEGIN { L='${p[17]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n    "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n    [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${k[30]}"' "F|getline g) { l++;if(l<=L) f=f"\n    "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n    '"${k[22]}"'"T;printf("'"${f[8]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' 's/^.{52}(.+) <.+/\1/p' ' /id: N|te: Y/{i++} END{print i} ' ' /kext:/ { split($0,a,":");p=a[1];k[S]='${k[25]}';k[U]='${k[26]}';v[S]="Safe";v[U]="true";for(i in k) { s=system("'"${k[30]}"'\\ :"k[i]" \""p"\"/*/I*|grep -qw "v[i]);if(!s) a[1]=a[1]" "i;};if(!a[2]) a[2]="'"${k[23]}"'";printf("'"${f[4]}"'",a[1],a[2]);next;} !/^ *$/ { p="'"${k[31]}"'\\ :'"${k[33]}"' \""$0"\"/*/'${k[32]}'";p|getline b;close(p);if(b~/, .+:/||b=="") b="'"${k[23]}"'";printf("'"${f[4]}"'",$0,b);} ' '/ en/!s/\.//p' ' NR>=13 { gsub(/[^0-9]/,"",$1);print;} ' ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?'${k[32]}'$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ / [VY]/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' '/^find: /!p;' ' /^p/{ s/.//g;x;s/\nu/'$'\f''/;s/(\n)c/\1'$'\f''/;s/\n\n//;p;};H;' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */    /;p;' ' s/^.+ |\(.+$$//g;p;' '1;END{if(NR<'${p[15]}')printf("^/(S|usr/(X|li))")}' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END{ if(i>1)print n} ' s/{'\.|jnl: ','P.+:'}'//;s/ +([0-9]+)(.+)/\2'$'\t\t''\1/p' ' /^ +iP.+:$/{ s/://;b0'$'\n'' };/es: ./{ /iOS/d;s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(B2|[my]): /H;d;:0'$'\n'' x;/[my]: [AM]|m: I.+p$|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/'$'\f''(0|-(4[34])?)$/p' '|sort'{'|uniq'{,\ -c},\ -nr} ' s/^/'{5,6,7,8,9,10}$'\f''/;s/ *'$'\f'' */'$'\f''/g;p;' 's/:.+$//p' '|wc -l' /{\\.{kext,xpc,'(appex|pluginkit)'}'\/(Contents\/)?'Info,'Launch[AD].+'}'\.plist$/p' 's/([-+.?])/\\\1/g;p' 's/, /\'$'\n/g;p' ' BEGIN{FS="\f"} { printf("'"${f[6]}"'",$1/2^30,$2);} ' ' /= D/&&$1!~/'{${k[24]},${k[29]}}'/ { getline d;if(d~"t") print $1;} ' ' BEGIN{FS="\t"} NR>1&&$NF!~/0x|\.([0-9]{3,}|[-0-9A-F]{36})$/ { print $NF"\f"a[split($(NF-1),a," ")];} ' '|tail -n'{${p[6]},${p[10]}} ' s/.+bus /Bus: /;s/,.+[(]/ /;s/,.+//p;' ' { $NF=$NF" Errors: "$1;$1="";} 1 ' ' 1s/^/\'$'\n''/;/^ +(([MNPRSV]|De|Li|Tu).+|Bus): .|d: Y/d;s/:$//;$d;p;' ' BEGIN { RS=",";FS=":";} $1~"name" { gsub("\"","",$2);print $2;} ' '|grep -q e:/' '/[^ .]/p' '{ print $1}' ' /^ +N.+: [1-9]/ { i++;} END { if(i) print "system: "i;} ' ' NF { print "'{admin,user}' "$NF;exit;} ' ' /se.+ =/,/[\}]/!d;/[=\}]/!p ' ' 3,4d;/^ +D|Of|Fu| [0B]/d;s/^ |:$//g;$!H;${ x;/:/p;} ' ' BEGIN { FS=": ";} NR==1 { sub(":","");h="\n"$1"\n";} /:$/ { l=$1;next;} $1~"S"&&$2!~3 { getline;next;} /^ {6}I/ { i++;L[i]=l" "$2;if(i=='${p[24]}') exit;} END { if(i) print h;for(j=0;j<i;j++) print L[i-j];} ' ' /./H;${ x;s/\n//;s/\n/, /g;/,/p;} ' ' {if(int($6)>'${p[25]}')printf("swap used %.1f\n",$6/1024)} ' ' BEGIN{FS="\""} $3~/ t/&&$2!~/'{${k[24]},${k[29]}}'/{print $2} ' ' int($1)>13 ' p ' BEGIN{FS="DB="} { sub(/\.db.*/,".db",$2);print $2;} ' {,1d\;}'/r%/,/^$/p' ' NR==1{next} NR>11||!$0{exit} {print $NF"\f"substr($0,1,32)"\f"$(NF-7)} ' '/e:/{print $2}' ' /^[(]/{ s/....//;s/$/:/;N;/: [)]$/d;s/\n.+ ([^ ]+).$/\1/;H;};${ g;p;} ' '1;END { exit "find /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom -mtime -'${p[23]}'s"|getline;} ' ' NR<='${p[26]}' { o=o"\n"$0;next;} { o="";exit;} END{print o|"sed 1d"} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab kextfind top pkgutil "${k[30]}\\" echo cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin' env pluginkit scutil 'dtrace -q -x aggsortrev -n' security sed\ -En awk 'dscl . -read' networksetup mdutil lsof test osascript\ -e netstat mdls route cat uname powermetrics );c2=(${k[21]}loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'" 'L*/Ca*/'${k[21]}'Saf*/E* -d 2 -name '${k[32]} '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' -i '-nl -print' '-F \$Sender -k Level Nle 3 -k Facility Req "'${k[21]}'('{'bird|.*i?clou','lsu|sha'}')"' "-f'%N: %l' Desktop {/,}L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message CRne '0xdc008012|(allow|call)ing|Goog|(mplet|nabl)ed|ry HD|safe b|xpm' -k Message CReq 'bad |Can.t l|corru|dead|fail|GPU |hfs: Ru|inval|Limiti|v_c|NVDA[(]|pagin|Purg(ed|in)|error|Refus|TCON|tim(ed? ?|ing )o|trig|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o%cpu,comm,ruid' "' syscall::recvfrom:return {@a[execname,uid]=sum(arg0)} syscall::sendto:return {@b[execname,uid]=sum(arg0)} syscall::open*:entry {@c[execname,uid,copyinstr(arg0),errno]=count()} syscall::execve:return, syscall::posix_spawn:return {@d[execname,uid,ppid]=count()} syscall::fork:return, syscall::vfork:return, syscall::posix_spawn:return /arg0<0/ {@e[execname,uid,arg0]=count()} syscall:::return /errno!=0/ {@f[execname,uid,errno]=count()} io:::wait-start {self->t=timestamp} io:::wait-done /self->t/ { this->T=timestamp - self->t;@g[execname,uid]=sum(this->T);self->t=0;} io:::start {@h[execname,uid]=sum(args[0]->b_bcount)} tick-10sec { normalize(@a,2560000);normalize(@b,2560000);normalize(@c,10);normalize(@d,10);normalize(@e,10);normalize(@f,10);normalize(@g,10000000);normalize(@h,10240);printa(\"1\f%@d\f%s\f%d\n\",@a);printa(\"2\f%@d\f%s\f%d\n\",@b);printa(\"11\f%@d\f%s\f%d\f%s\f%d\n\",@c);printa(\"12\f%@d\f%s\f%d\f%d\n\",@d);printa(\"13\f%@d\f%s\f%d\f%d\n\",@e);printa(\"14\f%@d\f%s\f%d\f%d\n\",@f);printa(\"3\f%@d\f%s\f%d\n\",@g);printa(\"4\f%@d\f%s\f%d\n\",@h);exit(0);} '" '-f -pfc /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag $ -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f'$'\f''%Sc'$'\f''%N -t%F {} \;' '/S*/*/Ca*/*xpc*' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' /\ kMDItemContentTypeTree=${k[21]}{bundle,mach-o-dylib} :Label "/p*/e*/{auto*,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {/p*,/usr/local}/e*/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list '-F "" -k Sender hidd -k Level Nle 3' /Library/Preferences/${k[21]}alf\ globalstate --proxy '-n get default' vm.swapusage --dns -get{dnsservers,info} dump-trust-settings\ {-s,-d,} -n1 '-R -ce -l1 -n5 -o'{'prt -stats prt','mem -stats mem'}',command,uid' -kl -l -s\ / '--regexp --files '${k[21]}'pkg.*' '+c0 -i4TCP:0-1023' ${k[21]}dashboard\ layer-gadgets '-d /L*/Mana*/$USER' '-app Safari WebKitDNSPrefetchingEnabled' '-Fcu +c0 -l' -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' '-F \$Message -k Sender kernel -k Message CReq "'{'n Cause: -','(a und|I/O |jnl_io.+)err|disk.+abo','USBF:.+bus'}'"' -name\ kMDItem${k[33]} -T\ hfs '-n get default' -listnetworkserviceorder :${k[33]} :CFBundleDisplayName $EUID {'$TMPDIR../C ','/{S*/,}'}'L*/{,Co*/*/*/L*/}{Cache,Log}s -type f -size +'${p[11]}'M -exec stat -f%z'$'\f''%N {} \;' \ /v*/d*/*/*l*d{,.*.$UID}/* '-app Safari UserStyleSheetEnabled' 'L*/A*/Fi*/P*/*/a*.json' users/$USER\ HomeDirectory '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' ' -F "\$Time \$(Sender): \$Message" -k Sender Rne "launchd|nsurls" -k Level Nle 3 -k Facility R'{'ne "user|','eq "'}'console" -k Message CRne "[{}<>]|asser|commit - no t|deprec|done |ect pas|fmfd|Goog|ksho|ndum|obso|realp|rned f|/root|sandbox ex" ' getenv '/ "kMDItemDateAdded>=\$time.now(-'${p[23]}')&&kMDItem'${k[33]}'=*"' -m\ / '' ' -F "\$Time \$(RefProc): \$Message" -k Sender Req launchd -k Level Nle 3 -k Message Rne "asse|bug|File ex|hij|Ig|Jet|key is|lid t|Plea|ship" ' print{,-disabled}\ {system,{gui,user}/$UID} '-n1 --show-initial-usage --show-process-energy' -r ' -F "\$Message" -k Sender nsurlstoraged -k Time ge -1h -k Level Nle 4 -k Message Req "^(ER|IN)" ' '~ "kMDItemKind=Package"' );N1=${#c2[@]};for j in {0..20};do c2[N1+j]=SP${k[j]}DataType;done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel,Firefox}\ extensions System\ load boot\ args FileVault\ {2,1} {Kernel,System,Console,launchd}\ log SMC Login\ hook 'I/O per process' 'High file counts' UID {System,Login,Agent,User}' services '{load,disabl}ed {Admin,Root}\ access Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory\ pressure Listeners Widgets Parental\ Controls Prefetching Nets Volumes {Continuity,I/O,iCloud,HID,HCI}\ errors {User,System}\ caches/logs XPC\ cache Startup\ items Shutdown\ codes Heat Diagnostic\ reports Bad\ {plist,cache}s 'VM (GiB)' Bundles{,' (new)'} Trust\ settings Activity Free\ space Stylesheet Library\ paths{,' ('{shell,launchd}\)} Data\ packages );N3=${#l[@]};for i in {0..8};do l[N3+i]=${k[5+i]};done;F() { local x="${s[$1]}";[[ "$x" =~ ^([\&\|\<\>]|$) ]]&&{ printf "$x";return;};:|${c1[30]} "$x" 2>&-;printf "%s \'%s\'" "|${c1[30+$?]}" "$x";};A0() { Q=6;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo -v;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;date '+Start time: %T %D%n';printf '\n[Process started]\n\n'>&4;printf 'Revision: %s\n\n' ${p[0]};};A1() { local c="${c1[$1]} ${c2[$2]}";shift 2;c="$c ` while [[ "$1" ]];do F $1;shift;done`";((P2))&&{ c="sudo $c";P2=;};v=`eval "$c"`;[[ "$v" ]];};A2() { local c="${c1[$1]}";[[ "$c" =~ ^(awk|sed ) ]]&&c="$c '${s[$2]}'"||c="$c ${c2[$2]}";shift 2;local d=` while [[ "$1" ]];do F $1;shift;done`;((P2))&&{ c="sudo $c";P2=;};local a;v=` while read a;do eval "$c '$a' $d";done<<<"$v";`;[[ "$v" ]];};A3(){ v=$((`date +%s`-v[3]));};export -f A1 A2 F;B1() { v=No;! ((v[1]))&&{ v=;P1=1;};};eval "`type -a B1|sed '1d;s/1/2/'`";B3(){ v[$1]="$v";};B4() { local i=$1;local j=$2;shift 2;local c="cat` while [[ "$1" ]];do F $1;shift;done`";v[j]=`eval "{ $c;}"<<<"${v[i]}"`;};B5(){ v="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d$'\e' <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F$'\e' ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`egrep -v "${v[$1]}"<<<"$v"|sort`;};eval "`type -a B7|sed '1d;s/7/8/;s/-v //'`";C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { B4 0 0 63&&C1 1 $1;};C4() { echo $'\t'"Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};C5() { sudo -k;pbcopy<<<"$o";printf '\n\tThe test results are on the Clipboard.\n\n\tPlease close this window.\n';exit 2>&-;};for i in 1 2;do eval D$((i-1))'() { A'$i' $@;C0;};';for j in 2 3;do eval D$((i+2*j-3))'() { local x=$1;shift;A'$i' $@;C'$j' $x;};';done;done;trap C5 2;o=$({ A0;D0 0 N1+1 2;D0 0 $N1 1;B1;C2 31;B1&&! B2&&C2 32;D2 22 15 63;D0 0 N1+2 3;D0 0 N1+15 17;D4 3 0 N1+3 4;D4 4 0 N1+4 5;D4 N3+4 0 N1+9 59;D0 0 N1+16 99;for i in 0 1 2;do D4 N3+i 0 N1+5+i 6;done;D4 N3+3 0 N1+8 71;D4 62 1 10 7;D4 10 1 11 8;B2&&D4 18 19 53 67;D2 11 2 12 9;D2 12 3 13 10;D2 13 32 70 101 25;D2 71 6 76 13;D2 45 20 52 66;A1 7 77 14;B3 28;A1 20 31 111;B6 0 28 5;B4 0 0 110;C2 66;D4 70 8 15 38;D0 9 16 16 77 45;C4;B2&&D0 35 49 61 75 76 78 45;B2&&{ D0 28 17 45;C4;};B2&&{ A1 43 85 117;B3 29;B4 0 0 119 76 81 45;C0;B4 29 0 118 119 76 82 45;C0;    };D0 12 40 54 16 79 45;D0 12 39 54 16 80 45;D4 74 25 77 15&&{ B4 0 8 103;B4 8 0;A2 18 74;B6 8 0 3;C3 75;};B2&&D4 19 21 0;B2&&D4 40 10 42;D2 2 0 N1+19 46 84;D2 44 34 43 53;D2 59 22 20 32;D2 33 0 N1+14 51;for i in {0..2};do A1 29 35+i 104+i;B3 25+i;done;B6 25 27 5;B6 0 26 5;B4 0 0 110;C2 69;D2 34 21 28 35;D4 35 27 29 36;A1 40 59 120;B3 18;A1 33 60 121;B8 18;B4 0 19 83;A1 27 32 39&&{ B3 20;B4 19 0;A2 33 33 40;B3 21;B6 20 21 3;};C2 36;D4 50 38 5 68;B4 19 0;D5 37 33 34 42;B2&&D4 46 35 45 55;D4 38 0 N1+20 43;B2&&D4 58 4 65 76 91;D4 63 4 19 44 75 95 12;B1&&{ D4 53 5 55 75 69&&D4 51 6 58 31;D4 56 5 56 97 75 98&&D0 0 N1+7 99;D2 55 5 27 84;D4 61 5 54 75 70;D4 14 5 14 96;D4 15 5 72 96;D4 17 5 78 96;C4;};D4 16 5 73 96;A1 13 44 74 18;C4;B3 4;B4 4 0 85;A2 14 61 89;B4 0 5 19 102;A1 17 41 50;B7 5;C3 8;B4 4 0 88;A2 14 24 89;C4;B4 0 6 19 102;B4 4 0 86;A2 14 61 89;B4 0 7 19 102;B5 6 7;B4 0 11 73 102;A1 42 86 114;j=$?;for i in 0 1 2;do ((i==2&&j==1))&&break;((! j))||((i))||B2&&A1 18 $((79+i-(i+53)*j)) 107+8*j 94 74||continue;B7 11;B4 0 0 11;C3 $((23+i*(1+i+2*j)));D4 $((24+i*(1+i+2*j))) 18-4*j 82+i-16*j $((112+((3-i)*i-40*j)/2));done;D4 60 4 21 24;D4 42 14 1 62;D4 43 37 2 90 48;D4 41 10 42;D2 48 36 47 25;A1 4 3 60&&{ B3 9;A2 14 61;B4 0 10 21;B4 9 0;A2 14 62;B4 0 0 21;B6 0 10 4;C3 5;};D4 9 41 69 100;D2 72 21 68 35;D2 49 21 48 49;B4 4 22 57 102;A1 21 46 56 74;B7 22;B4 0 0 58;C3 47;D4 54 5 7 75 76 69;D4 52 5 8 75 76 69;D4 57 4 64 76 91;D2 0 4 4 84;D2 1 4 51 84;D4 21 22 9 37;D0 0 N1+17 108;D4 76 24 88;A1 23 18 28 89;B4 0 16 22 102;A1 16 25 33;B7 16;B4 0 0 34;D1 31 47;D4 64 4 71 41;D4 65 5 87 116 74;C4;B4 4 12 26 89 23 102;for i in {0..3};do A1 0 N1+10+i 72 74;B7 12;B4 0 0 52;C3 N3+5+i;((i))||C4;done;A1 24 22 29;B7 12;B3 14;A2 39 57 30;B6 14 0 4;C3 67;A1 24 75 74;B4 1 1 122||B7 12;B4 0 0 123;B3 23;A2 39 57 30;B6 23 0 4;C3 68;B4 4 13 27 89 65;A1 24 23;B7 13;C3 73;B4 4 0 87;A2 14 61 89 20;B4 0 17;A1 26 50 64;B7 17;C3 6;D0 0 N1+18 109;D4 7 11 6;A3;C2 39;C4;} 4>&2 2>/dev/null;);C5
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
        Part 1 of 8 done at … sec
        Part 8 of 8 done at … sec
        The test results are on the Clipboard.
        Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Update to 10.9.3 Stopped My Time Machine Backup from Working

Hi. Just now I upgraded my Mac from 10.9.2 to 10.9.3.
I also use Time Machine to back up my Mac to an external drive and I've been using it for years.
One result of the update from 10.9.2 to 10.9.3 is that I'm now unable to back up to my Time Machine drive. I successfully backed up to it earlier this afternoon at 3:17PM (it's now 4:32PM), but I'm now getting this error message:
"Time Machine couldn't complete the backup to 'Time Machine Backup.'
Files can't be copied onto the backup disk because it is read-only. You may need to repair or erase the disk using Disk Utility. If the disk can't be repaired, select a different disk for backups.
Last successful backup: Today, 3:17PM"
I shut down my Mac and restarted it, thinking maybe the error would go away, but it hasn't.
Did 10.9.3 somehow make my Time Machine backup drive read-only? Is there a way to change it back so that it also has write permissions? I can't figure out how to do it. Or am I going to have to erase the drive?
Thanks.
M

I've had intermittent read-only unable to auto-back-up to an external hard drive in general without the OS number considerations as well. Sometimes just a reboot of the computer and/or the drive reset it. As others stated, I also went into disk utility and checked the disk...which took 30 minutes or so. It then always auto-reinstated my ability to write to the disk as well as ungreyed the write permission below it (still in disk utility) so I could click which setting I wanted, and allowed me to use the other info gui to also change the permissions (which was locking me out before the long disk check). I had alternatively tried to use the terminal to chmod my write permissions to that drive, emulating exactly the other drive permissions (which did work), but I was unsuccessful. After doing the long check disk process as above, however, it did show the command line permissions to be exactly as the working disk, surprise surprise. Maybe I could have sudo-ed the chmod command (I didn't try that before giving up and doing the long disk check process) right away. If so, my advice would be to find the path to the disk by using a file inside it (you can drag something to the terminal to auto-write the path), use ls -l to look at the permissions you want to emulate, and sudo chmod [permission] [file] using this wiki http://en.wikipedia.org/wiki/Chmod.

Why does power nap time machine backup not work on my August 2012 macbook pro retina?

Hello. I got a MacBook Pro with retina display in August of this year 2012. I have done the SMC ? firmware update and I have 10.8.2 installed on my machine. Power nap still doesn't seem to work. I have the button in energy saver preferences and I have clicked it so it looks like power nap should work. When I am running Time Machine backup with the time capsule and I close the lid (plugged into power) it appears that no progress is made when I reopen the lid. I have closed the lid with activity monitor running and with network displayed. When I reopen the lid it may take up to one minutes to come out of sleep. When it does come out of sleep I can see that there has been no network traffic. Eventually, time machine backup resumes and I can see several megabytes per second. When I closed the lid overnight, just to make sure backup didn't restart after lid closing, I saw that no progress had been made in backup when I reopened the lid.
What options are left if I already have 10.8.2 and I have done the required firmware? One person has mentioned a clean install but I really don't like to have to reenter all the different passwords and all the different preferences again unless that's absolutely necessary. Are there any other options left to try before a clean install?
One other bit of information. I have filevault turned on; however, it looks like others have a working power nap even with file vault enabled. If this is not an option, the power nap button should be grayed out when the machine is in filevault.
Thank you for any help.

Yeah I still have the same problem BTW; it still does not work.
The second I open the lid and take it out of sleep mode, it starts to backup automagically, but when it's sleeping EVEN when it's connected to AC power, TM backups do NOT work to my OS X Server.
I don't understand what the problem is here.
I didn't before but I do have FileVault turned on now -- should that make a difference?
In either situation it didn't work, but now that I think about it, I could understand why it wouldn't backup while asleep. Apparently the encrypted volume will stay encrypted during sleep and even at the lock screen; it's not until you open the lid and log in from the lock screen that it will unlock the encrypted boot volume.
But even still, I did *not* have FV turned on before, and this still did not work.
Is there some third party solution that can do what I want this to do?
Here's my use case:
1.) I have a mac mini at home that I use when I'm at home; it runs OS X server.app (bought and paid for) and has TM server turned on.
2.) I have a laptop that I mainly use at work and I don't use at all when I come home (ie. when I'm ready to head home for the day I close the lid and don't open it until I'm back at work the next day, but the laptop does come home with me every day).
What I want to have happen is this:
1.) The minute my laptop enters my home wifi lan (even though it's still asleep with lid closed) I want it to automatically backup the boot drive.
I thought that's what Power Nap was supposed to do, but then I found out that in order for this to work, you have to be connected to AC power; so then I tried that -- ie. every day I come home, I put my laptop in a docking station that has AC power, but TM backups while lid closed / sleeping STILL do not occur!
Thanks for your help everyone...Looking forward to a solution that works.
EDIT:
I found this thread:
https://discussions.apple.com/thread/4158709
"It looks like Power Nap doesn't perform Time Capsule backups when the MacBook Air screen is closed."
So apparently that is yet *another* requirement to get powernap working. The lid can not be closed.
What is the difference between sleep with lid open and sleep with lid closed!?

Help with Time Machine Backups not working..

Let me preface this by saying I have spent the last day scouring the internet for solutions to my problem. I have tried every option that I have run across and have had no luck in resolving my problem. As a last resort, I'm turning here in hopes that you can be of help.
I have a 2012 Macbook Pro running Moutain Lion. I use an external HD for my time machine backups. I am having an issue with Time Machine not functioning. The initial error message I receive when I attempt to use TM to backup is: "Time machine couldn't coplete the backup to Rick's backup disk". "Unable to complete backup. an error occurred while creating the backup folder".
I searched the forums and net and found several things to do to try and resolve this issue. My computer will freeze out and not let me erase, or re-partition the the hard drive, so I switched it over to an older macbook of my girlfriends and am successfully able to erase, and re-partition the drive (using disk utility) as suggested by several forum postings I have read. I am able to run disk verify and disk repair and both say the disk is "ok" with no issues. The moment the erase and partition is done, her computer prompts a message : "Would you like to use this disk for Time Machine Backups" which tells me it is working properly. When I move it back to my macbook pro and attempt to run TM backup, it will now work and copy about 10g of my 120g before shutting down with this error message:
"Time Machine couldn't complete the backup to "Rick's Backup Disk". An error occurred while copying files. The problem may be temporary. If the problem persists, use disk utility to repair your backup disk."
If i attempt to re-run TM at that point, I get the original error message:
"Time machine couldn't coplete the backup to Rick's backup disk". "Unable to complete backup. an error occurred while creating the backup folder".
If I move the TM back to my Girlfriends computer and attempt to run TM, it will function properly and backup her entire harddrive. When I erase and try again on mine, I always end up back with the same issues. It's clearly something in my macbook that is screwing it up. Can anyone please offer some help! I'd be much appreciative.

rcury4 wrote:
"Time machine couldn't coplete the backup to Rick's backup disk". "Unable to complete backup. an error occurred while creating the backup folder".
See #C10 in Time Machine - Troubleshooting
"Time Machine couldn't complete the backup to "Rick's Backup Disk". An error occurred while copying files. The problem may be temporary. If the problem persists, use disk utility to repair your backup disk."
Not one of Apple's more informative messages.
There's a problem with a file on your system. See #C3 in the above link. It will show you how to locate the message(s) that describe the problem, then help you fix it. If that doesn't help, post back with details, including all the messages, what you've done, and the results.

Time machine backup not working right!

I am running Snow Leopard on a reasonably new imac 20".
I have been having problems getting my computer to backup to our timecapule. We have it programmed to automatically backup, but it is coming up with the error message: the backup was not performed because an error occurred while copying files to the backup disk.
I have looked in the console, and initially found an error message relating to a flashplayer/sys file (sorry can't remember all the detail, and it doesn't seem to be there now). I set it to exclude that file from backup, and crossed my fingers. Still no joy.
It is now showing the following error message:
Dec 14 22:08:21 00-25-4b-8d-28-95 com.apple.backupd[427]: Error: (5) getxattr for key:com.apple.backupd.SnapshotState path:/Volumes/Backup of Sebastian Jonsson’s iMac/Backups.backupdb/Sebastian Jonsson’s iMac/2009-12-03-053418
It keeps repeating, the only difference is the numbers at the end.
I have no idea what to do now. Can anyone please help me, I'm worried about not having my info backed up properly.

I have the same problem which has just started when all was working fine. I have done I think all the things suggested in Time Machine - Troubleshooting User Tips but I still get the same error message.
Starting standard backup
Attempting to mount network destination using URL: afp://Thom%20Dennis%20MacBookPro%[email protected] al/Thom%20Dennis%20MacBookPro%204's
Mounted network destination using URL: afp://Thom%20Dennis%20MacBookPro%[email protected] al/Thom%20Dennis%20MacBookPro%204's
Disk image /Volumes/Thom Dennis MacBookPro 4's/Thom Dennis MacBookPro 4.sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Event store UUIDs don't match for volume: Thom Freedom 2
Forcing deep traversal on source: "Thom Freedom 2" (mount: '/' fsUUID: 8CCFA0EB-DF43-399B-9212-905CCB159237 eventDBUUID: BF4914D6-7DB6-447E-B0C4-71D3A5ED830B), {1, 1, 1, 0}
Node requires deep traversal:/ reason:must scan subdirs|require scan|
No pre-backup thinning needed: 2.12 GB requested (including padding), 361.76 GB available
Indexing a file failed. Returned 200 for: /Library/Application Support/Adobe/Adobe Version Cue CS4/Client/4.0.0/VersionCue.framework/Versions/A/Resources, /Volumes/Time Machine Backups/Backups.backupdb/Thom Dennis MacBookPro 4/2009-12-24-104229.inProgress/C627CFC7-FA55-4D69-936C-B192A4A
+Error message before that one:+
Starting standard backup
Attempting to mount network destination using URL: afp://Thom%20Dennis%20MacBookPro%[email protected] al/Thom%20Dennis%20MacBookPro%204's
Mounted network destination using URL: afp://Thom%20Dennis%20MacBookPro%[email protected] al/Thom%20Dennis%20MacBookPro%204's
Disk image /Volumes/Thom Dennis MacBookPro 4's/Thom Dennis MacBookPro 4.sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Event store UUIDs don't match for volume: Thom Freedom 2
Forcing deep traversal on source: "Thom Freedom 2" (mount: '/' fsUUID: 8CCFA0EB-DF43-399B-9212-905CCB159237 eventDBUUID: BF4914D6-7DB6-447E-B0C4-71D3A5ED830B), {1, 1, 1, 0}
Node requires deep traversal:/ reason:must scan subdirs|require scan|
Stopping backupd to allow ejection of backup destination disk!
+And before that ...+
Starting standard backup
Attempting to mount network destination using URL: afp://Thom%20Dennis%20MacBookPro%[email protected] al/Thom%20Dennis%20MacBookPro%204's
Mounted network destination using URL: afp://Thom%20Dennis%20MacBookPro%[email protected] al/Thom%20Dennis%20MacBookPro%204's
Disk image /Volumes/Thom Dennis MacBookPro 4's/Thom Dennis MacBookPro 4.sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Event store UUIDs don't match for volume: Thom Freedom 2
Forcing deep traversal on source: "Thom Freedom 2" (mount: '/' fsUUID: 8CCFA0EB-DF43-399B-9212-905CCB159237 eventDBUUID: BF4914D6-7DB6-447E-B0C4-71D3A5ED830B), {1, 1, 1, 0}
Node requires deep traversal:/ reason:must scan subdirs|require scan|
No pre-backup thinning needed: 2.05 GB requested (including padding), 361.76 GB available
Indexing a file failed. Returned 200 for: /Applications/Adobe Illustrator CS4, /Volumes/Time Machine Backups/Backups.backupdb/Thom Dennis MacBookPro 4/2009-12-24-104229.inProgress/1A14CF13-0CE0-47C7-8689-2401DE2A51C7/Thom Freedom 2/Applications/Adobe Illustrator CS4
Aborting backup because indexing a file failed.
Stopping backup.
Copied 24 files (21 KB) from volume Thom Freedom 2.
Copy stage failed with error:11
Backup failed with error: 11
Ejected Time Machine disk image.
When I have flagged a file for not being backed up, the error message indicates an indexing problem with another file.
Where now please?

Time Machine backups not working with Yosemite upgrade?

Time Machine backups "Waiting" with no data after Yosemite install?

But still not working.....Im getting some error message/info come up though that i never had come up before when running mavericks....I can't even insert a 2.9MB pic/image of pic i took of screen error msg...says 3.0MB Max??
Saying something about the disc couldn't be found.....but i have highlighted/encrypted back up disc selected...not "available discs".....back up disc is the one I've always backed up to....can anyone on here just help me with this please!!??
Thank you.

Time Capsule backup not working anymore after upgrade to Snow Leopard

Hi,
after I upgraded to Snow Leopard I started the backup process with the time capsule. Within several days I tried this about 5 times and the iMac crashed or froze after some time doing the backup - but it never completed.
I then deleted the whole content of the time capsule and started a fresh backup. Now I receive a message after some gigabyte that there was a problem and I should try it again. Again the backup has not finished so far. I tried to reduce the amount of files to backup by excluding folders - no chance. Since the upgrade to snow I was not able to complete one single backup.
Any ideas or similar experience?

I have had a similar problem. I have the latest 1TB Time Capsule and backup worked fine in Leopard. I am backing up over my home wireless network. The backup starts, but at some point it freezes with the spinning pizza wheel if I click on anything. Everything freezes with no possibility of force quitting any application.
I tried trashing the plist for Time Machine, but that didn't work. Tonight I'm going to try a backup with the computer connected to the Time Capsule by Ethernet.
I can access my existing Time Machine backups on the Time Capsule.
This is a frustrating situation. But for this, SL works great, but this problem is a critical one.

Time machine backups wont move to time capsule

i have two mac minis, one is the mid 2010 model and the the other one is a 2006 model. i have successfuly used superduper to finally move my 500 gigs
of time machine backups to the new time capsule. but the older 2006 model has me lost. i am tempted to go to the applestore to make them copy it
if i follow the directions including resetting time machine the best i can get is a pop up box every hour that says the identity of the time capsule cannot
be verified. this does not show up on the 2010 mini
when i tell it to pick the drive theres 2 other drives that i dont even have! those are "HOME" and "NET" on "localhost" i have no idea where its getting
those drive paths. maybe its my readynas , when i go to /Volumes, there is no home or net folders
another problem i have with time machine is for some strange reason there is a range of backups in an old sparse bundle file and i would like to move all the backups for this computer into one main directory, instead of having to browse old time machines. but when i try to copy from one sprarse bundle to another i get an error saying that the backup files cannot be modified

rigormortis wrote:
if i follow the directions including resetting time machine the best i can get is a pop up box every hour that says the identity of the time capsule cannot
be verified.
Is that the message in #C15 of Time Machine - Troubleshooting? If so, are you selecting Use This Disk? If not, exactly what does it say (or post a screenshot).
another problem i have with time machine is for some strange reason there is a range of backups in an old sparse bundle file and i would like to move all the backups for this computer into one main directory, instead of having to browse old time machines. but when i try to copy from one sprarse bundle to another i get an error saying that the backup files cannot be modified
That's correct; you cannot merge one set of backups into another. A set of TM backups has a complex structure, with things all linked together; you cannot alter it. See How Time Machine works its Magic for an explanation.

Time Machine Backup Not Working - Please Help!

Hey everyone - first post here, please help! I'm having trouble with TM. Here are the messages from Time Machine Buddy:
Starting automatic backup
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Forcing deep traversal on source: "Macintosh HD" (mount: '/' fsUUID: AD5C219F-0EC8-32C3-B827-2FF171A4AE46 eventDBUUID: 68A67596-22DD-4FB5-AA49-390E857688E1)
Backup content size: 166.93 GB excluded items size: 34.36 GB for volume Macintosh HD
Found 842174 files (132.56 GB) needing backup
160.14 GB required (including padding), 824.43 GB available
Copied 74.41 GB of 132.56 GB, 693114 of 842174 items
Copied 130.6 GB of 132.56 GB, 728437 of 842174 items
Copied 731588 files (130.76 GB) from volume Macintosh HD.
Backup canceled.
Starting manual backup
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Forcing deep traversal on source: "Macintosh HD" (mount: '/' fsUUID: AD5C219F-0EC8-32C3-B827-2FF171A4AE46 eventDBUUID: 68A67596-22DD-4FB5-AA49-390E857688E1)
Didn't get valid migration dates.
Found 842174 files (1.87 GB) needing backup
3.9 GB required (including padding), 692.16 GB available
Copied 85694 files (1.71 GB) from volume Macintosh HD.
Using file event preflight for Macintosh HD
Will copy (41.8 MB) from Macintosh HD
Found 430 files (42.2 MB) needing backup
2.23 GB required (including padding), 689.79 GB available
Copied 5022 files (46 MB) from volume Macintosh HD.
Created new backup: 2012-10-09-015038
Copying OS X Recovery set
Starting post-backup thinning
Error: Error Domain=NSOSStatusErrorDomain Code=-50 "The operation couldn’t be completed. (OSStatus error -50.)" (paramErr: error in user parameter list) deleting backup: /Volumes/Time Machine Back
I tried to back it up the first time, and it was taking forever, so I stopped it, and then started a new backup. Can someone let me know what to do so I can be comfortable knowing the machine is definitely backed up?
Thanks!

The indication that the backup completed successfully is the best evidence that it did. If you want something more explicit, you can proceed as below.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Drag or copy — do not type — the following line into the Terminal window, then press return:
sudo tmutil compare
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
The command will take at least a few minutes to run. Eventually some lines of output will appear below what you entered.
Each line that begins with a plus sign (“+”) represents a file that has been added to the source volume since the last snapshot was taken. These files have not been backed up yet.
Each line that begins with an exclamation point (“!”) represents a file that has changed on the source volume. These files have been backed up, but not in their present state.
Each line that begins with a minus sign (“-“) represents a file that has been removed from the source volume.
Files that you’ve excluded from backup, or that are excluded automatically, are ignored.
At the end of the output, you’ll get some lines like the following:
Added:
Removed:
Changed:
These lines show the total amount of data added, removed, or changed on the source(s) since the last snapshot.

Time Machine Backup Not Working

I connected my external hd to my computer to do a backup. But ended up running out of time, had to stop the backup and disconnect my harddrive to leave.
When I came back to it about 12hrs later, my computer would not mount my HD.
I went to disk utility at which stage it registered my HD but still wouldn't mount. Went to repair and it said I couldn't repair need to reformat.
Now i've divided my HD into 2 sections 500gb/500gb
One for Time Machine, and other for general use.
I couldn't access either.
Afraid that I could lose everything I try my HD in my PC to get what I can off the general use side and it mounts no problem at all.
How can I get my Time Machine backups off. As I need them at the moment because i've somehow synced a new phone with my mac and its deleted my entire calendar.
Any thoughts?

You can't do much if the disk won't mount.
Try this...
Launch/Utilities/Terminal and enter this command at the prompt:diskutil listPress return. Note the number of the disk (far left column) you want to unmount.
Then, enter this command:sudo diskutil umount force /dev/ (the number of the disk)
You may also want to run sudo diskutil repairVolume /dev/(the number of the disk)
-mj

IMac freezes & Time Machine doesn't work anymore

Hello,
For several days now my trusty iMac (two years old) keeps freezing without a recognizable pattern. Programs like iTunes, iPhoto or maybe even the Finder just stop working and display only the rotating ball - the only thing left to do for me after that is to manually terminate that process or (in the case of the Finder) to restart the whole iMac. I'm really clueless as to where this behaviour suddenly comes from, up until about a week ago the iMac worked perfectly. And now something like this happens every single time I start it.
Another thing that doesn't work anymore is Time Machine. My last automatic backup is from September 17th. After that it just stopped working. Every time an automatic or manual backup is initiated it just says "Searching for backup volume" but doesn't find it, even after several hours of looking. The Time Capsule itself works perfectly, no errors whatsoever.
My iMac is up-to-date, I also already ran the disgnostics of the hard drive program - everything seems to be fine. Can anyone help me?
Thank you in advance,
Paul

When you next have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Time Machine backup not working from startup disk

So, in an attempt to make BootCamp work, I erased my hard drive (as instructed) after first backing up with Time Machine. Now trying to restore from the Time Machine drive, after starting up from install disk, and nothing happens. Disk Utility works when I open that from Utilities, but when I try to open "Restore System from backup..." nothing happens.
Any clues?

SDRussell wrote:
So, in an attempt to make BootCamp work, I erased my hard drive (as instructed) after first backing up with Time Machine. Now trying to restore from the Time Machine drive, after starting up from install disk, and nothing happens. Disk Utility works when I open that from Utilities, but when I try to open "Restore System from backup..." nothing happens.
nothing at all? that can only mean you have a problem with your install DVD. nothing can be done about that. what kind of DVD is it? is it the install disk that came with your computer? if so you can try asking apple for a replacement dvd. another option would be to do a fresh install of leopard and them use migration assistant during the original computer setup (you'll be given that option) to import your data and applications from the TM backup.
Any clues?

Time machine backup wont work anymore:(

Similar Messages

Maybe you are looking for