"Time Machine Backups" could not be unmounted (Disk Utilities)

Hi there,
I am having an error message when trying to back up time machine. Therefore I went to disk utilities and verified disk.. said it needs to be prepared. When I try to repair time machine, i then get the following message "The disk “Time Machine Backups” could not be unmounted". I tried again and then it says its been repaired. so when i tried a backup of time machine i get "time machine error. unable to complete backup. an error occurred while copying files to the backup volume"
I have installed "Time machine buddy" and I am getting"error reading system logs"
I have a mac osx 10.5.8. No antivirus or spotlight running that i know of.
Any ideas?

One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode, see if external Drive can be repaired...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.

Similar Messages

I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the b.u. stops

I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the backup stops. The system preferences are set to "Never" for Computer sleep and Display sleep. The computer does not ordinarily log off automatically, but it has done this twice since I started the Time Machine backup.

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If all you see are messages that contain the word "Starting," you didn't clear the search box.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

Time Machine backups do not migrate from iMac to MacBook Pro

I just moved from a iMac G5 to a MacBook Pro. I love Apple's migration tool, but it seems that Time Machine backups do not migrate.
I checked with support, and did a basic amount of searching, and it seems that I need to erase and reformat the backup drive, losing all of my backups.
Can this be true? That's a pretty screwy backup solution.
Is it possible to rename the backup folder from "iMac G5" to "MacBook Pro"?
Is it possible to add a MacBook Pro backup folder to the one already there?
Any help is appreciated.

I'm not quite sure what you mean. It sounds like you successfully migrated, and got everything set up properly on the new Mac.
Now you want TM to just continue backing-up the new Mac to the old Mac's backups?
If so, then no, that's not going to work. TM keeps the backups for each Mac completely separate. This is usually an advantage, so you can back up two or Macs to the same drive without any conflicts.
Plus, the version of OS on your new Intel laptop is very different from the one from your old PPC desktop; a whole different set of drivers, and of course code for Intel vs. PPC.
So TM on the new Mac cannot treat the old backups as if they were from the new Mac. It must start a whole new "sequence" of backups for the new Mac. If there's room on the disk, you can leave the old backups there until you're sure you don't need them, but that presents another problem: when you want to delete them, you can do it only one at a time, via TM, using the procedure in item #12 of the Frequently Asked Questions *User Tip* at the top of this forum. That's rather tedious and time-consuming, so most folks just erase the TM drive and let it start fresh.
If I've misunderstood, please clarify the situation.

Time machine backup too big for empty disk??

So I restart my MacBook Pro a few minutes after completing a full Time Machine backup. When it restarts it goes through the grey startup screen, then gets stuck on the blue screen just before the desktop normally appears. This happens whenever I startup. I am still able to hit the power button and get the Restart/Shut Down dialog, so I restart using my Snow Leopard boot disk, run Disk Utility, repair permissions, and repair disk, but the problem still remains. I decide to Restore from Time Machine Backup, so I erase my disk (80 GB, had only 200 MB free), go to the Restore screen and connect my backup disk. Now the weird part -- it says my latest backup is too big for the disk, even though i just erased everything, and 74.2 GB show as free. All my previous backups seem to fit fine, but apparently the last time Time Machine backed up more from my disk than can fit on my disk! It seems having a hard disk close to full is enough to render a backup effectively useless. Guess I'll have to restore from a previous backup, then manually copy the newer files. Just wanted to alert others to this insane problem, so it doesn't happen to them.

dgordon412 wrote:
(80 GB, had only 200 MB free)
That's likely corrupted your system. You should have a minimum of 10% - 15% free at all times. That's almost certainly why it wouldn't restart.
even though i just erased everything, and 74.2 GB show as free.
There must be something else on the drive; if you erase it, it should have just under 80 GB free. Is there another partition?
Did you erase with a Leopard Install disc or a Snow Leopard disc? If you used a Leopard disc, that might explain showing only 74.2 GB free (it counts differently).
If so, use your +Snow Leopard+ install disc to do a complete reformat, and try to restore the backup. A Leopard disc cannot restore a Snow Leopard backup. Even the Snow Leopard disc may not work, as it's just too full and/or your system was damaged by getting too full.
All my previous backups seem to fit fine, but apparently the last time Time Machine backed up more from my disk than can fit on my disk! It seems having a hard disk close to full is enough to render a backup effectively useless.
Having an OSX drive that full will make your Mac extremely sluggish, cause data corruption and/or loss, apps to crash, etc.
Guess I'll have to restore from a previous backup, then manually copy the newer files. Just wanted to alert others to this insane problem, so it doesn't happen to them.
If you can get your Mac running, you need to make several GBs of space immediately.
If all else fails, reformat the internal HD and install OSX from your Snow Leopard Install disc, then use +Setup Assistant+ after the Welcome video to transfer +*most, but not all+* of your stuff from the backup. Omit the contents of one or more large sub-folders in a home folder (such as Photos, Music, or Movies).
See #19 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum), for details.

How do I encrypt my Time Machine Backup on the External Hard disk

I have taken a backup of my data onto an external Hard Disk. I have used the Time Machine application to take the back up.
I want to encrypt this time machine backup on the External Hard disk. Any suggestions???

jcorroon wrote:
The Encrypt Backup Disk is greyed out for me. Any suggestions?
Many thanks!
Have you selected the disk?
You can only encrypt disks that are directly-connected (ie, not on a network), with the GUID partition map scheme.
Put your mouse pointer on the dimmed checkbox, and after a moment an explanation should appear.

Time Machine: sparcebundle could not be accessed (error -1)

Hello!
I’ve using Time Machine with my Time Capsule for some time and out of nowhere it started giving me the following error: The backup disk image “xxx/xxx/xxx.sparcebundle”could not be accessed (error -1).
I’ve been searching weeks for a fix without success, already tried http://pondini.org/TM/Troubleshooting.html - #C17 and it didn’t help.
Also tried on my Time Capsule: unplug, reset, factory reset, erase disk, format disk, change password, and on Time Machine preferences tried to remove disk and add again…. no success, error persists.
I discovered the only way for backup to work is to I login as a test user which I created for this purpose (I’m the administrator).
Any help would be greatly appreciated. Thanks.
Here are the logs:
Backup logged in as Administrator (Backup Failed):
Starting automatic backup
Attempting to mount network destination URL: afp://xxxx%20xxxx;AUTH=SRP@Aar._afpovertcp._tcp.local/Data
Mounted network destination at mount point: /Volumes/Data using URL: afp://xxxx%20xxxx;AUTH=SRP@Aar._afpovertcp._tcp.local/Data
Failed to eject volume /Volumes/Data (FSVolumeRefNum: -166; status: -47; dissenting pid: 0)
Waiting 60 seconds and trying again.
Network destination already mounted at: /Volumes/Data
Failed to eject volume /Volumes/Data (FSVolumeRefNum: -166; status: -47; dissenting pid: 0)
Waiting 60 seconds and trying again.
Network destination already mounted at: /Volumes/Data
Failed to eject volume /Volumes/Data (FSVolumeRefNum: -166; status: -47; dissenting pid: 0)
Giving up after 3 retries.
Backup failed with error: 21
[SnapshotUtilities mountPointForVolumeRef] FSGetVolumeInfo returned: -35
Failed to eject volume (null) (FSVolumeRefNum: 0; status: -35; dissenting pid: -1)
Failed to eject Time Machine disk image: /Volumes/Data/Super’s iMac.sparsebundle
Backup logged in as a test user (Backup completed successfully):
Starting automatic backup
Attempting to mount network destination URL: afp://xxxx%20xxxx;AUTH=SRP@Aar._afpovertcp._tcp.local/Data
Mounted network destination at mount point: /Volumes/Data using URL: afp://xxxx%20xxxx;AUTH=SRP@Aar._afpovertcp._tcp.local/Data
Disk image /Volumes/Data/Super’s iMac.sparsebundle mounted at: /Volumes/Time Machine Backups 2
Backing up to: /Volumes/Time Machine Backups 2/Backups.backupdb
Using file event preflight for Mac HD
Will copy (44.4 MB) from Mac HD
Using file event preflight for Dados
Will copy (Zero KB) from Dados
Found 2280 files (44.4 MB) needing backup
1.5 GB required (including padding), 752.35 GB available
Copied 7285 files (45.2 MB) from volume Mac HD.
Copied 7303 files (45.2 MB) from volume Dados.
Using file event preflight for Mac HD
Will copy (2.6 MB) from Mac HD
Found 58 files (2.6 MB) needing backup
1.59 GB required (including padding), 752.32 GB available
Copied 1122 files (4.4 MB) from volume Mac HD.
Copied 1140 files (4.4 MB) from volume Dados.
Created new backup: 2013-10-02-121637
Starting post-backup thinning
Deleted /Volumes/Time Machine Backups 2/Backups.backupdb/Super’s iMac/2013-10-01-120751 (4.1 MB)
Deleted /Volumes/Time Machine Backups 2/Backups.backupdb/Super’s iMac/2013-10-01-110755 (8.5 MB)
Deleted /Volumes/Time Machine Backups 2/Backups.backupdb/Super’s iMac/2013-10-01-101239 (21.7 MB)
Deleted /Volumes/Time Machine Backups 2/Backups.backupdb/Super’s iMac/2013-10-01-004813 (1.3 MB)
Post-back up thinning complete: 4 expired backups removed
Backup completed successfully.
Ejected Time Machine disk image: /Volumes/Data/Super’s iMac.sparsebundle
Ejected Time Machine network volume.

Please read this whole message before doing anything.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click anywhere in the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -ef
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; crontab -l 2> /dev/null; } | open -ef
Step 4
ls -A /e*/{cr,la,mach}* {,/}Lib*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -ef
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of login items' | open -ef
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Time Machine Error and Can't Unmount Disk

I hope I'm posting this in the right place. I think Leopard must be optimized for Intel Macs, and I'm guessing my problems have to do with using a G5. Anyway, I have a 250G start up drive and a 500G second hard drive which I've been using for Time Machine back ups. A few days ago I began getting errors that time machine could not complete its back up. No details whatsoever.
I looked at several articles and it appeared that I needed to create a partition on my 500G drive and do something else, I forget what. But when I attempted to do this, I got a message that the "disk could not be unmounted". What does this mean and what do I do now?
thanks!

Hi! You shouldn't have to partition it but it does need to be in the Mac format which you can check in disk utility. AS for the failure to unmount often when you get this message if you'll watch the disk actually goes ahead and dismounts and you can just attempt to erase again and it will go ahead and erase. Tom

Moutain Lion Time Machine Backup To WHS 2011 Via Disk Utility Image On Windows Share?

I read that with Lion you could do a Time Machine backup to a network share on Windows Home Server 2011. I read you could create a image file via Disk Utility that would be placed on the network share, but mounted as a regular disk in Mac. I think I read this method no longer works on Moutain Lion though. Has anyone tried it? I'm setting up a new Mac Mini and would like to do time machine backups to my WHS 2011 drivepool. If it is possible great, any way to use the backup for bare metal restores as well? (ether across the network, or putting that image file on a usb drive first etc) I use bootcamp to go back and forth on my Mac Mini, but I'd like to keep things backed up on the Mac side via standard time machine.

I re-googled and found something I read about a few days ago that shows how it was done in Lion:
http://basilsalad.com/how-to/create-time-machine-backup-network-drive-lion/
I think maybe I found someone that tells how to do it:
http://www.jamesbadger.ca/2012/09/12/mountain-lion-time-machine-over-afp-auto-mo unt-edition/
The question is, how do I use this backup for a baremetal restore then? I'm assuming I would do a generic Mountain Lion restore, and then just restore over the network after I manually re-mount the image again first.
Does this sound like a real option/solution? Looks like maybe I answered my own question, but I'd like to hear anyone else confirm it works and is worth trying.
So my goal is to do a time machine backup over the network to a windows machine.
If it's not possible, I guess I'll have to break down and plug in an external USB drive, but I'd still like to know if it's possible for another friend as well.

Encryption of Time Machine backup on an external hard disk

I use an external hard disk (not Time Capsule) for my Time Machine backup. How can I encrypt this external hard disk. I didn't find such a function in the Mac OS. Thanks a lot for any hint.

Click here and follow the instructions. The image's contents can't be accessed without the password, but the image file can still be deleted.
(56647)

Time Machine backup failure on case-sensitive disk?

Hello,
I just started getting a Time Machine backup failure error that says "A disk you are backing up is case-sensitive, but the backup disk is not."
None of my external disks have changed and I've not added any new ones.
The error seems to be stemming from the fact that I'm logged in as multiple users on my system, all with MobileMe accounts. When I "get info" on all mounted disks, the only ones that are reporting "Mac OS Extended (Case-sensitive, Journaled)" are the mounted iDisks from the other use accounts that I'm currently logged in as.
Does this mean I cannot use Time Machine while logged in as multiple users, all with the iDisks mounted? That would be a major annoyance to either have to log out/log in to each user as I need them or to disable iDisk syncing in my MobileMe prefs.
Regards,
Terry

That seems odd to me; my iDisk shows WebDAV as the format and doesn't interfere with backups, but I don't have any other users' iDisks, either.
Another possibility would be to reformat your TM drive as case-sensitive. That would, of course, erase all your backups so TM would start over from scratch, and some possible troubles when restoring (see the pink box in #5 of the Frequently Asked Questions *User Tip,* also at the top of this forum, for details); but you'd no longer have the backup problem.

Time Machine Backup does not fit on HDD

Hi,
I have a very odd problem. I do have a 750GB hdd in my macbook pro. My external time machine backup drive is 1TB. After haveing some issues with my system I had to reinstall OSX. Now I want to recover my system from the external drive. When I run through the recovery process formatting the 750GB drive the drive utiliity tool tells my that I have 748GB available. When I get to to the point to chose the target for my recovery partition of the 748GB only 697GB are left. Now, of course) the recovery tool tells that there is not enough space to recovery the system from the external drive.
My old system was quite full. I only had 2 GB free space left. So the size of the time machine backup should be close to the 750GB. But 697GB is just not enough. What happened to the 50GB between formatting the drive and wanting to recover from the external HDD?
Thanks for your help.

Erbsenroller wrote:
When I run through the recovery process formatting the 750GB drive the drive utiliity tool
Do you mean Disk Utility? If so, that's not how you restore Time Machine backups.
After erasing the HD, quit Disk Utility and select the Restore From Time Machine Backup option.
See Time Machine - Frequently Asked Question #14 for the gory details.

Time machine backup is not recognized in Setup Assistant

Hi, I went through lots of discussion but could not find answers to my case.
My Macbook pro crashed the other day and replaced HDD.
I had Time Machine Backup several days ago and was trying to restore.
I started with install CD and used utility to restore from backup.
It recoginzed the volume of Time Machine Backup and next step, it does not show any backups that I can choose.
I installed Mac OSX and tried "transfer from a Time Machine Backup" but it does not recognize my the backup.
I checked hard drive on other computers and can see backups and no issues with hard drive.
Can anyone help?
Mac OS X 10.6.3 (Snow Leopard)
Macbook pro 2.53 GHz Intel Core duo
Thanks.

Dear Pondini,
I found the .exclusions.plist file at the 3/6 backup and it has the bunch of exclusions list...I guess this was the reason. But I really didn't set this up.
Thanks again. Somehow, I don't have "com.apple.mail.plist" in "~/zzang/library/preference". I foundt it under "~/zzang/library/containers/com.apple.mail/Data/Library/Preferences/".
1. I first deleted the current preferences files and copied the com.apple.mail.plist from the backup to ~/zzang/library/preference/ folder.
2. I also delted all the files under ~zzang/Library/Mail.
3. I copied contents under ~Library/Mail/ from backup.
4. I started Mail and saw basic account settings and different mail accounts were there. But all the contents (mail, signature, mailboxes under each accounts (sent, deleted, spam, etc.), mailboxes on my mac, are missing.
5. I rebuilt the root mailboxes and no effect.
6. Hence, I checked copied mailboxes and got information and it only has size of 8KB each. When I copied, it was copying 6.6GB. I don't know what is going on here.
7. Hence, I started again from the process 1 above. It is now copying 6.6GB again.
8. What I noticed when I started Apple Mail, it says it will import mail but it was very short and then went back to the same status. No contents....
I looked at more details...
Original backup has V2 directory and no other directories or files ~zzang/Library/Mail while my current Mac created bunch of other things over there. See below images.
3/6 backup
Copied mail on the computer.

Time machine backup is not working

I have tried three different times to restore my computer from a time machine backup. Each time it gets stuck on the Apple logo screen once it it is done restoring the information. Not sure what to do.. every time I restart it by holding the power button it gets stuck on the same screen.

Read all the info about restore in Pondini.. I am not sure what you are looking at but he goes through the different methods here.
http://pondini.org/TM/Home.html
See info for setup assistant and migration assistant.
More particular info from inside the OS.
http://pondini.org/TM/FAQ.html
Q14-17
The backup could be corrupt.. and it can take a long time to work over wireless .. it is really important to use fastest possible connection.. if you are talking Time Capsule that is ethernet.. if you are talking external drive that is whatever is the best external drive system you have available.
Pondini also has info on how to verify the backup is working and to fix minor issues.
See A5 here. http://pondini.org/TM/Troubleshooting.html
Let me add.. TM is great when it works .. and it is a dog when it fails.. Of late.. it fails alot. Yosemite being the worst possible. If you are trying to restore a computer having loaded Yosemite it is probably no longer possible to recover back to what you were running.

How to setting up new (June 2011) TC to do wireless time machine backup but not connected to network?

Hello. Just got new (refurbished June 2011, 2TB) Time Capsule. My building has a shared wifi network, and I'm assuming it's hard to join the network with Time Capsule and still be satisfied with security/privacy/performance. (Of course, if I'm assuming wrong, please let me know!)
My understanding is that I can use Time Capsule wirelessly to do Time Machine backups by switching out of my wireless network to - I assume - a new Time Capsule generated network(?). It's an extra step, but that beats connecting cables to the computer everytime I need to do backup. Basically it's like an external wireless hard drive that I have to join everytime the backup is updated, right? (Again, if there is a better way to go about doing this, please let me know.)
So how do I go about doing this? The setup manual isn't helpful (not at all).
Here's more detail if necessary. I have 10.8 Macbook Air (which I plan to upgrade to 10.9 soon) and my spouse is running 10.9 Macbook Pro. I am also assuming I don't have to partition Time Capsule, and when the Time Machine backs up, it'll figure who's who.
Thanks in advance.

Hello. Just got new (refurbished June 2011, 2TB) Time Capsule. My building has a shared wifi network, and I'm assuming it's hard to join the network with Time Capsule and still be satisfied with security/privacy/performance. (Of course, if I'm assuming wrong, please let me know!)
Security is ok.. but performance is abominable.
The TC unfortunately has some design limitations that Apple imposed that makes it rather poor for anything but ethernet.
There is a couple of ways around the problem of sequential internet or backups.
1. Get a wireless bridge that is suited to your in-building system.. and plug that into the TC so it can take normal router settings .. This will give you double NAT but I doubt your in building system will be handing out public IP anyway. An airport extreme can do this. Although it is pricey for the same results as a $35 standard wireless bridge. All devices in your place will then get both internet and backup direct to the TC.
One flaw here could be the download limits.. if you have two connections do you get double the downloads.. ??
ie how many IP are allocated to you?? And is it divided between all of them or the more IP clients the more download bandwidth?
2. Use a USB wireless stick in the Mac.. these can be tiny little things now.. just buy Mac compatible ones.. use that for internet and use the internal (faster) wireless for local connections. there are some manual setup tricks needed here but nothing hard.

Time Machine backup did not restore office suite app from backup

I recently restored to my internal HD from a Time Machine backup.
I had not done a Time Machine restore before, so I did not attempt to customize the restore -- that is, I just accepted the default behavior after selecting the source disk.
I've since found that Time Machine does not seem to have backed up a third party office suite I had been using on my MacBook Pro or a file I had saved to my hard drive from that app. Perhaps I'll find that other files were also not restored.
Does anyone have any idea why those would have been missed in the restore?
Also, given the situation I’m now in would it be best to just download the app and start from scratch? I don’t know how one manually restores an already-installed app (i.e., from its backup), given the many different files that are usually created in many different locations when an app is installed from its original 'package' file.
Thanks.

Linc Davis wrote:
Locate the files in the Finder, then enter Time Machine. You should see snapshots of the open Finder window cascading back in time.
Delayed response, sorry. What I meant to ask there was how one can navigate quickly to the window that (hopefully) has what one is looking for.
E.g., if I don't recall anything else about a file than its name (& hopefully I remember that well enough to get a search hit from it -- its own kind of problem since a filename misspelling can end you up with no hits), how to locate the desired file quickly -- i.e., without paging through lots of Finder windows.
Any further advice about how to do that?
Maybe I'm misunderstanding how to do this in Time Machine, but the Finder window cascade seems to me like having a file cabinet full of folders, any of which might have the desired file.
Thanks again.

"Time Machine Backups" could not be unmounted (Disk Utilities)

Similar Messages

Maybe you are looking for