Time machine backups earliest hour but nothing later?

ok so i use time machine to back up my computer. im wondering what happened...
on sunday the 25th i had hourly backups like usual, i tried to get back into sundays TM and the only one there is at 144am. ---how do i get back to the later times? i need 544am! sometime between those 2 times, i lost some info.
so 144am is the ONLY backup available to click on on the right side in TM.
i need 544am...not an option.
anyway to find that file or is the only thing that i can look at now for sunday the 25th is 144am??
does this make sense??
thanks!

Hi, and welcome to the forums.
Try the things in #D5 of [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum).

Similar Messages

Time Machine backup history present but inaccessible after Mountain Lion clean install

Hi all,
A few days ago, I took the Mountain Lion plunge and after performing all the preliminary data copying to external hard drives as well as on last Time Machine backup to my dedicated Time Machine external hard drive, I booted from my ML recovery USB thumb drive, reformatted the internal HD, and proceeded to perform a clean install of OS X 10.8.
The ML install and initial setup completed without a hitch, and I had no difficulty in reconnecting to my existing Time Machine EHD and performing an initial backup of the freshly upgraded Mountain Lion system. It took several minutes in the "preparing backup" phase; but once it got through that, it backed up my entire system (which was basically nothing more than the new OS and iLife at this point) within an hour or so. Time Machine has since worked reliably in performing the automatic backups every hour.
But here's the problem: My backup history went back all the way to March 2011 before the ML upgrade, and it still (sorta kinda) does now. However, although I can see all of the backup history tick marks when I enter TM, the ONLY SELECTABLE backups are from the point where ML was installed and onward. The previous Lion and Snow Leopard backups are visible; just not selectable. I also verified that the physical backup folders are still present on my TM EHD dating all the way back to last March. I ran a verify and repair operation on the TM volume, and it came back clean. I have disconnected and reconnected the TM EHD to TM and of course rebooted, but no joy. TM did not force me to "start over" with a new backup as some posters have complained of. And it seems to be working fine otherwise.
Has anyone else had a similar experience after upgrading to ML? Any thoughts on how I might reconnect to my TM backup history?
Thanks in advance for your thoughts.

How did you put your data back after the erase?
I didn't, or rather I haven't yet. Basically, all I have done so far is:
Reformat Lion HD and install ML clean from USB thumb drive
Run through initial virgin boot setup, e.g. enter my Apple ID and desired user account info
Change a few preferences (the "use right side of mouse for secondary click" setting first and foremost!)
Configured Time Machine to use pre-existing Time Machine Backups EHD and let it do initial backup (which it simply added on to the existing backup history as I had hoped)
Drag-and-drop copied my saved iTunes library (~50 GB) from my ext. FW drive to my new Home Music folder and confirmed that iTunes was working and able to sync with my iPhone and iPad
Installed the iLife suite from my Bundled Applications DVD and then updated those apps via the App Store
Obviously the iTunes folder is an exception to "I haven't yet", but basically, the Lion's share (pun intended) of my previous data has not yet been copied back from the temporary storage on the EHD.
The reason you can't see the backups of the old home folder from the new one is simply that they have different names.
Yes, I know that now. Everything was fine all along. I just didn't realize that TM [quite sensibly] grays out any backup history finder windows and right-hand-side tick marks that contain no backup of the folder currently in focus. Since the folder I had in focus was one that didn't exist before I installed Mountain Lion, there was nothing to access except for the most recent post-upgrade backups.
Thanks much for your help.

Old time machine backup partition erased, but new partition failed

I had a defective time machine backup and had to start over. My disk has 4TB. The original time machine backup contained two backups from different laptops and was in the largest partition of 2TB. I then had two addition 1TB partitions. I remade new time machine backups to each of the 1TB partitions for each of the mac book pros. When I went to delete and change the original 2TB partition I found I could minus it out to create free space, but all attempts to try to repartition it as 2TB or as 2 1 TB pieces and even a piece as small as 200MB failed and asked me to resize closer to the original partition.
I have seen many similar issues, but not quite like this. I have already shut down the external drive and unplugged it and the restarted my machine, but to no effect. I now have 2 1 TB partitions and a 2 TB empty space.
Any suggestions?
I'm a little afraid to copy the Time Machine backups to a new drive as I heard that is NOT a good idea.
Is this a problem created when a partition is used for a Time Machine backup?
Han

How are you looking for the backup?
Time Machine will only show the active backup.
You can hold down the Option key while selecting the Time Machine menu and you will have the option to Browse other Time Machine backups.
Here is some good info on how Time Machine "thinks:" http://pondini.org/OSX/Home.html

I'm trying a full restore in Lion, but it won't. States that there isn't enough space on the Mac HD. How do I restore everything from a recent Time Machine Backup?

I'm trying a full restore in Lion, but it won't. States that there isn't enough space on the Mac HD. How do I restore everything from a recent Time Machine Backup?

Thanks but I think it has something to do with the 'restore'. in the newest iTunes 11, when I click on the tab "iphone", it redirects me to the "welcome to your new iphone" page and asks about doing a 'restore'. I already did a 'restore', but it went to the original factory settings and I want to 'restore' to my lastest back up as of April 12. When I choose that option, it says my iphone doesn't have enough space. I don't know how much I need to delete in order to make it work. I've deleted lots, but it only has 4.1 GB available. I'm not sure why this isn't enough to do a 'restore'. I don't want to delete all my photos and videos, but maybe I will have to?...7.7GB is used up for that. I can't sync or do ANYTHING...

Recovering single file from old Time Machine Backup

I see many questions/answers that almost address my issue, but not quite, so I'm starting a new post. If this has been answered somewhere and I missed it feel free to just refer me to the correct post!
I recently had to do a full System Restore from a Time Machine backup. The good news is that it worked beautifully and I'm using my iMac like nothing ever happened. When Time Machine tried to run (post restore), it said I didn't have enough space on my external drive. Okay, based on other posts here I see that it won't just continue from the old TM backups and it's starting "anew"...got it.
The old TM backups must still be on that drive because it shows 144GB USED and 100GB AVAIL of my 250GB external drive. Okay, again based on other posts I know that I could just wipe the drive clean and start fresh...BUT...
I restored to my TM backup of 8/24....now I realize that there are one or two files that I at some point stopped having TM backup and now I want to get them back (the whole point of TM, right?)...I figured since it's "holding" that space on my external drive, the old backups are intact and I just need a way to get to them to pull them back to my restored system, then start TM from scratch.
I can't get at the old TM backups. I've tried:
1) Using the "Browse other Time Machine Backups..." feature. It doesn't see the old TM backup...sees the drive, but nothing on it.
2) Browsing the drive in "Finder"...nothing shows up...just the attempted NEW backup.
3) Connecting the external drive to an entirely different Mac and trying to browse the disk in Finder OR use the Browse other Time Machine Backups...still nothing.
So I have a 250GB drive that shows 144GB used, but no way to even view what that is....am I out of luck? Or would something in DiskUtility or a 3rd party software (DiskWarrior) help in this situation?
Is there any way to go pull one or two files from my old TM backup?

Exactly Glenn....I did nothing to the hard drive after the "restore from Time Machine Backup"...
I've never used the Migration Assistant...have to look into that.
I didn't want to be argumentative since I was the relative newbie asking for help, but I HAVE to believe that if I didn't write over the files (i.e. reformat the drive), AND the Finder is recognizing that there are 144 GB USED, the files must be there, untouched....
The urgency isn't there for me anymore, I've already re-created the one doc I wanted to recover and the other file was my Windows XP virtual machine file...(I didn't want to have to re-install Windows from scratch - but I did)....so maybe this is a good time to "play" with that drive while I can afford to lose everything on it!

How to select correct time machine backup for migration assistant

We have two MacBooks backing up to one Time Capsule using time machine: let's call them H and R.
I have had to reinstall Leopard on Macbook H and am now trying to restore using Migration Assistant.
Migration Assistant finds the Time Capsule and identifies that there are two Time Machine Backups, but doesn't give an option to select the one to use.
Whenever I click 'Continue' it does the 'Checking time machine backup' (for hours), then brings up the data to restore, but every time it comes up with the data and settings from Macbook R.
How can I tell Migration Assistant which Time Machine Backup I want to use?

Brilliant. That was it.
I used the other MacBook to run Disk Utility on my backup volume and repaired it: #A5 is bang on.
Then, Setup Assistant saw both backups and let me select the one I wanted. It's now transferring my stuff.
Very relieved and extremely grateful.
Your apple tips should come with every mac and time capsule.

Lost folders after time machine backup

I have been moving my office and did not do a time machine since 2/09. Finally found the drive while unpacking and plug it into my laptop...took a bit but finished with no issues. This morning I turned the laptop on and every folder that had a 2009 label is GONE!...missing, everything from photo folders to work and customer folders with everything inside too. Even my 2009 Quickbook program is gone alone with the data!
I finally got back from the office and plugged in the time machine backup and there is nothing there either!
HELP, any ideas?

SLee_Meridian wrote:
The drive is portable and hard wired when running TM. Both backups are in a folder called Backups.backupdb. There are a few other folders on the drive, but I looked through them and nothing there either.
What is strange is that many recent files and folders are still on my computer and on yesterdays backup. It is only folders that started with 2009 (and the contents) that are missing.
Are you talking about the +backup folders+ or your +data folders?+
Via the Finder, in List mode, you should see something like this (dots representing indentations):
(note: be *extremely careful not to move, change, or delete anything via the Finder.)*
Backups.backupdb
....Your Computer Name
........Date/Time
............Your HD Name
........Date/Time
............Your HD Name
. . . etc . . .
...Your Son's Computer Name
........Date/Time
............His HD Name
........Date/Time
............His HD Name
. . . etc . . .
Each of those Date/Time folders represents one backup. What are the last three dates & times shown for your Mac?

Restoring from Lion Time Machine backup and keeping Lion recovery partition

I am installing a new hard drive in my MacBook Pro. I have a Time Machine backup of everything, but I'm aware that just restoring the Time Machine backup to the new drive will not restore the Lion recovery drive/partition. What is the best way to move my data to the new drive? Am I best doing a clean install and moving everything over by hand from the Time Machine backup?

I've just done this. I booted from a Lion Recovery USB stick then restored from a Time Capsule. I had no RecoveryHD partition after it.
However, if you download and run the Lion installer once you log in to your desktop it will re-create the RecoveryHD partition. Long way round though.
Best solution is to make a bootable USB (8GB) or DVD from the Lion installer App. Then do a new install of Lion to get the Recovery HD partition created. Once installed you can restart and boot up using the newly created Recovery HD and restore your entire computer from the Time Capsule. Hey presto, your computer should be back to the way it was.

Cannot see time machine backups with 10.8.1, server

Hello,
I am running 10.8.1 on an iMac 27", recently upgraded to server. I was going to erase my internal drive and restore from the latest time machine backup to defragment, but when I go into the recovery partition, choose 'restore from time machine backup', I do not see any of my server backups. The latest backup shown is prior to the ML upgrade with server. The backups appear to run normally. Could someone provide any guidence on how to actually see the latest backups? I am now concerned that I don't have accessible backups.
Thanks!
Eric

You can only do a full restore from snapshots that include a complete, bootable system. If you excluded system files from backup, the snapshots are not restorable in Recovery.

Hi, Question about secure empty trash. I moved some Time Machine backup files to the trash from an external hard drive. Now I can't secure empty trash. It starts, finds 74,003 files, and does nothing. The external hard drive shows it's empty, but it isn't

I moved some time machine backup files from an external USB hard drive to the trash. Tried secure empty trash. It counts 74,003 items, then just sits there. The external hard drive window shows it's empty, but the info pane says it only has 50G of memory left. I left the secure empty trash on over night. It did nothing. Ideas?
Thanks,
Ron

Relaunch the Finder, then from the Finder menu bar, select
Finder ▹ Preferences ▹ Advanced
and uncheck the box marked Empty Trash securely. Try again to empty the Trash.

I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the b.u. stops

I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the backup stops. The system preferences are set to "Never" for Computer sleep and Display sleep. The computer does not ordinarily log off automatically, but it has done this twice since I started the Time Machine backup.

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If all you see are messages that contain the word "Starting," you didn't clear the search box.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

I used migration assn't to load a Time Machine backup onto a new mac. The first TM backup after that took some time, perhaps not surprising. But the backups thereafter have all taken hours, with huge amounts of "indexing" time. Time to reload TM?

I used migration assn't to load a Time Machine backup onto a new mac. The first TM backup after that took some time, perhaps not surprising. But the backups thereafter have all taken hours, with huge amounts of "indexing" time. Time to reload TM?

Does every backup require lots of indexing? If so, the index may be damaged.
Try Repairing the backups, per #A5 in Time Machine - Troubleshooting.
If that doesn't help, see the pink box in #D2 of the same link.

I want a new and more powerful (non-Apple) wireless router but I still want to use my existing Time Capsule to continue with my Time Machine backups and I still need the Time Capsule's Network Attached Storage (NAS) features and capabilities

THE SHORTER STORY
My goal is to successfully use my existing Time Capsule (TC) with a new and more powerful wireless router. I need a new and more powerful wireless router in order to reach a distant Denon a/v receiver that is physically located in a master bedroom some 50 feet away from my modem. I need to provide this Denon a/v receiver with an Internet connection so that it can obtain its firmware updates and I need to connect this Denon a/v receiver to my network in order to use its AirPlay feature. I believe l still need the TC's Network Attached Storage (NAS) features because I am not sure if the new wireless router will provide me with the NAS like features / capabilities I need to share files between my two Apple laptops with OS X 10.8.2. And I know that I absolutely need my TC's seamless integration with Apple's Time Machine (TM) application in order to continue to make effortless backups of my two Apple laptops. To my knowledge nothing works with TM like Apple's TC. I also need the hard disk storage space built into the TC.
I cannot use a long wired Ethernet cable connection in this apartment and I cannot use power-line adapters. I have read that wireless range extenders and repeaters are difficult to successfully set-up and that they will reduce data speeds, especially so when incorrectly set-up. I cannot relocate my modem and/or primary base station wireless router.
In short, I want to use my TC with my new and more powerful wireless router. I need to stop using the TC to connect to the modem. However, I still need the TC for seamless TM backups. I also need to use the TC's built in hard drive for storage. And I may still need the TC's NAS capabilities to share files wirelessly between laptops because I am assuming the new wireless router will not provide NAS capabilities for OS X 10.8.2 (products like this/non-Apple products rarely seem to work with OS X 10.8.2/Macs to provide NAS features and capabilities). Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone please advise on how to set-up my new Asus wireless router with my existing TC in such a way to accomplish all of this?
What is the best configuration or set-up to accomplish my above goals?
Thank you in advance for your assistance!!!
THE FULL STORY
I live in an apartment building where my existing Time Capsule (TC) is located in my living room and serves many purposes. Specially, my TC is at least all of the following:
(1) Wi-Fi router connected to Comcast Internet service via Motorola SB6121 cable modem - currently the TC is the Wi-Fi base station that connects to the modem and has the gateway address to the Internet. The TC now provides the DHCP service for the Wi-Fi network.
(2) Wireless router providing Internet and Wi-Fi network access to several Wi-Fi clients - two Apple laptop computers, an iPod touch, an iPad and an iPhone all connect wirelessly to the Internet via the TC.
(3) Wired Ethernet router providing Internet and Wi-Fi network access to three different devices - a Panasonic TV, LG Blu-Ray player and an Apple TV each use one of the three LAN ports on the back of the TC to gain access to the Internet.
(4) Primary base station in my attempt to extend my wireless network to a distant (located far away) Denon a/v receiver requiring a wired Ethernet connection - In addition to the TC, which is my primary base station, I am also using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. I cannot use a wired Ethernet connection to continuously travel from the living room to the master bedroom. The distance is too great as I cannot effectively hide the Ethernet cable in this apartment.
(5) Time Machine (TM) backup facilitator - I use my TC to wirelessly back-up two Apple laptops using Apple's Time Machine (TM) application. However, I ran out of storage space on my TC and therefore added external storage to it. Specifically, I added an external hard drive to my TC via the USB port on the back of the TC. I now use this added external hard drive connected to the TC via USB as the destination storage drive for my TM back-ups. I have partitioned the added external hard drive, and each of the several partitions all have enough storage space (e.g., each of the two partitions used by TM are sized at three times the hard drive space of each laptop, etc.). Everything works flawlessly.
(6) Network Attached Storage (NAS) - In addition to using the TC's Network Attached Storage (NAS) capabilities to wirelessly back-up two Apple laptops via TM, I also store other additional files on both (A) the hard drive built into the TC and (B) the additional external hard drive connected to the TC via USB (there are additional separate partitions on this drive for these other additional and non-TM backup files).
I use the TC's NAS feature with my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Again, everything works wirelessly and flawlessly. (Note: the Apple TV is connected to the network via Ethernet and a LAN port on the back of the TC).
The issue I am having is when I try to listen to music via Apple's AirPlay in the master bedroom. This master bedroom is located at a distance of two rooms away from the TC's current location in the living room, which is a distance of about 50 feet. This apartment has a long rectangular floor plan where each room is connected to the next in a straight line. In order to use AirPlay in the master bedroom I am using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. This additional base station connects wirelessly to the WiFi network provided by my TC and then gives my Denon receiver the wired Ethernet connection it needs to use AirPlay. I have tried moving my iTunes music directly onto my laptop's hard drive, and then I used AirPlay on this same laptop to connect to the Denon receiver. I always get a successful connection and the song plays, but the problem is that the connection inevitably drops.
I live in an apartment building and all of the many wireless routers in this building create a great deal of WiFi interference on both the 2.4 GHz and 5GHz bands. I have tried connecting the Netgear product to each the 2.4 and 5 GHz bands, but neither band can successfully maintain a wireless connection between the TC and the Netgear product. I also attempted to maintain a wireless connection to an iPod touch using the 2.4 GHz band and AirPlay on this iPod touch to play music on the Denon receiver. Again, I was able to establish a connection and successfully play music, but after a few minutes the connection dropped and the music stopped playing. I therefore have concluded that I have a poor wireless connection in the master bedroom. I can establish a connection, but it is intermittent with frequent drops. I have verified this with both laptops by working in the master bedroom for an entire day on both laptops. The Internet connection in this master bedroom proved to drop out frequently - about once an hour with the laptops. The wireless connection and the frequency of its dropout are far worse with the iPod touch and an iPhone.
I cannot relocate the TC. Also, this is an apartment and I therefore cannot extend the range of my network with Ethernet cable (I cannot drill through walls/ceilings, etc.). It is an old building with antiquated wiring and power-line adapters are not likely to function properly, nor can I spare the direct power outlet required with a power-line adapter. I simply need every outlet I can get and cannot afford to block any direct outlet.
My solution is to use a more powerful wireless router. I found the ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router which will likely provide a better connection to my wireless Internet in the master bedroom than the TC. The 802.11ac band of this Asus wireless router is totally useless to me, but based on what I have read I believe this router will provide a stronger connection at greater distances then my TC. And I will be ready for 802.11ac when it becomes more widely available.
However, I still need to maintain the TC's ability to work seamlessly with TM to backup my two laptops. Also, I doubt the new Asus router will provide OS X 10.8.2 with NAS like features and capabilities. Therefore, I still would like to use the TC's NAS capabilities to share files on my network wirelessly assuming the Asus wireless router fails to provide this feature. I need a new and more powerful wireless router, but I need to maintain the TC's NAS features and seamless integration with TM. Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone advise on how to set-up my existing TC with this new Asus wireless router in such a way to accomplish all of this?
Modem
Motorola SB6121 SURFboard DOCSIS 3.0 Cable Modem
Existing Wireless Router and Primary Wi-Fi Base Station - Apple Time Capsule
Apple Time Capsule MC343LL/A 1TB Sim DualBand (purchased June 2010, likely the Winter 2009 Model)
Desired New Wireless Router and Primary Wi-Fi Base Station - Non-Apple Asus
ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router
Extended Wi-Fi Base Station - Provides an Ethernet Connection to a Denon A/V Receiver Two Rooms Away from the Modem
Netgear Universal Dual Band Wireless Internet Adapter for TV & Blu-Ray (WNCE3001)
Addition External Hard Drive Attached to the Existing Apple Time Capsule via USB
WD My Book Studio 4TB Mac External Hard Drive Storage USB 3.0
Existing Laptops on the Wireless Network Requiring Time Machine Backups
MacBook Air (11-inch, Mid 2012) OS X 10.8.2
MacBook Pro (13-inch Mid 2010) OS X 10.8.2
Other Existing Apple Products (Clients) on the Wireless Network
iPod Touch (second generation) is model A1288.
iPad (1st generation)
Apple TV (3rd generation) - Quantity two (2)

Thanks Bob Timmons.
In regards to a Plan B, I hear ya brother. I am already on what feels like Plan Z. Getting WiFi to a far off room in an apartment building crowded with WiFi routers is a major pain.
I am basing my thoughts on the potential of a new and more powerful router reaching the far off master bedroom based on positive reviews on cnet.com, pcmag.com and pcworld.com. All 3 of these web sites have reviewed the Asus RT-AC66U 802.11AC wireless router as well as its virtual twin cousin 802.11n router. What impressed me is that all 3 sites rated this router #1 overall in terms of both range and speed (in both the 802.11n and 802.11AC flavors). They tested the router in real world scenarios where the router needed to compete with a lot of other wireless routers. One of the sites even buried this Asus router in a media room with thick walls and inside a media cabinet. This Asus router should be able to serve my 2.4 GHz band wireless clients (iPod Touch and iPhone 4) with a 2.4GHz Wireless-N band offering some 50 feet of dependable range and a 60 Mbps throughput at that range. I am hoping that works, but it's borderline for my master bedroom. My 5 GHz wireless clients (laptops) will enjoy a 5GHz Wireless-N band offering 150 feet of range and a 200 Mbps throughput at that range. I have no idea what most of that stuff means, but I did also read that Asus could reach 300 feet and I got really excited. My mileage may vary of course and I'm sure I'm making some mistakes in my interpretation of their data. However, my Winter 2009 Time Capsule was rated by cnet.com to deliver real world performance of less than that, and 802.11AC may or may not be useful to me someday. But when this Asus arrives and provides anything other than an excellent and consistent wireless signal without drops in the master bedroom it's going right back!
Your solution sounds great, but I have some questions. I'm using OS X 10.8.2 and Airport Utility (version 6.1 610.31) and on its third tab labeled "Wireless" the top option enables you to set "Network Mode" to either:
Create a wireless network
Extend a wireless network
Off
Given your advice to "Turn off the wireless on the TC," should I set Network Mode to Off? Sorry, I'm clueless in regards to how to turn off the wireless on the TC any other way. Can you provide specific steps on how to turn off the wireless on the TC? If what I wrote is correct then what should the rest of this Wireless tab look like, or perhaps it is irrelevant when wireless is off?
Next, what do you mean by "Configure the TC in Bridge Mode?" Under Airports Utility's fourth tab labeled "Network" the top option "Router Mode" allows for either:
DHCP and Nat
DHCP Only
Off (Bridge Mode)
Is your advice to Configure the TC in Bridge Mode as simple as setting Router Mode to Off (Bridge Mode)? If yes, then what should the rest of this "Network" tab look like? Anything else involved in configuring the TC in Bridge Mode or is it really as simple as setting the Router Mode to "Off (Bridge Mode)"?
How about the other tabs in Airport Utility, can they all stay as is assuming I use the same network name and password for the new Asus wireless router? Or do I need to make any other changes to the TC via Airport Utility?
Finally, in regards to your Plan B suggestion. I agree. But do you have a Plan B for me? I would greatly appreciate any alternative you could provide. Specifically, if you needed a TC's Internet connection to reach a far off corner of your home how would you do it? In the master bedroom I need both a wired Ethernet connection for the Denon a/v receiver and wireless Internet connection for the iPhone and iPod Touch.
Power-Line Adapters - High Cost, Blocks at Least One Wall Outlet and Does Not Solve the Wireless Need
I actually like exactly one power-line adapter, which is the D-Link DHP-540 PowerLine AV 500 4-Port Gigabit Switch. This D-Link power-line adapter plugs into your wall outlet with a normal sized plug (regular standard power cord much like any other electronic device) instead of all of the other recommended power-line adapters that not only use at least one wall outlet but also often block the second outlet. You cannot use a power strip with a power-line adapter which is very impractical for me. And everything about my home is strange and upside down. The wiring here is a disaster and I don't have faith in its ability to carry Internet access from the living room to the master bedroom. And this D-Link power-line adapter costs $90 each and I need at least two to make the connection to the Denon A/V receiver. So, $180 on this solution and I still don't have a dependable drop free wireless connection in the master bedroom. The Denon might get its Ethernet Internet connection from the power-line adapter, but if I want to use an iPhone 4 or iPod Touch to stream AirPlay music to the Denon wirelessly (Pandora/iTunes, etc.) from the master bedroom the wireless connection will not be stable in there and I've already spent $190 on just the two power-line adapters needed.
Extenders / Repeaters / Wirelessly Extending the Wireless Network
I have also read great things about the Amped Wireless High Power Wireless-N 600mW Gigabit Dual Band Range Extender (Repeater) SR20000G and the My Net Wi-Fi Range Extender. The former is very powerful and the latter is easier to install. Both cost about $150 ish so similar to a new Asus router. However, everything I read about Range Extenders points to them not being very effective for a far off corner of your house wherein it's apparently hard to place the range extender in the sweet spot where it both gets a strong enough signal to actually effectively extend the wireless signal and otherwise does not reduce network throughput speeds to unacceptable speeds.
Creating a Roaming Network By Hard Wiring with Ethernet Cable - Wife Would Say, "**** No!"
Even Apple seems to warn against wirelessly extending your network (see: http://support.apple.com/kb/HT4145#) and otherwise strongly recommends a roaming network where Ethernet cable is used to connect two wireless base stations. However, I am in an apartment where stringing together two wireless base stations with Ethernet cable would have an extremely low wife acceptance factor (WAF). I cannot (both contractually and from a skill prospective) hide Ethernet wire in the walls or ceiling. And having visible Ethernet cable running from room-to-room would be unacceptable, especially to the wife.
So what is left? Do you have a Plan B for me? Thanks in advance for your help!

Time Machine Backup Stuck on Preparing Backup for 12 hours

Hello,
I have a 2011 iMac and am running OS X 10.7.2. Up until a few days ago, my Time Machine backups (to a USB 2.0 external hard drive) were running fine. Now, when Time Machine tries to back up, all it does is display the progress bar with the words "Preparing backup..." below. This message will remain indefinitely (I've let Time Machine run for as long as 12 hours and nothing changes).
I have done a fair amount of searching online regarding this problem and have tried the steps in Pondini's troubleshooting list ( http://pondini.org/TM/D1.html ):
1. I first tried downloading and running the Time Machine buddy widget. I installed it but the widget was just blank. So, I went into Console and saved one my logs instead. My log consisted of a huge string of similar entries. Three of these entries are shown below:
1/28/12 12:12:53.629 PM          com.apple.backupd          Error (256): fetching properties: Error Domain=NSCocoaErrorDomain Code=256 "The file “yprime.h” couldn’t be opened." UserInfo=0x7f91ae359590 {NSURL=file://localhost/Volumes/JQTimeMachineBackup/Backups.backupdb/Jason%20Qu int%E2%80%99s%20iMac/2012-01-25-234450/Macintosh%20HD/Applications/MATLAB.app/ex tern/examples/shrlib/yprime.h, NSFilePath=/Volumes/JQTimeMachineBackup/Backups.backupdb/Jason Quint’s iMac/2012-01-25-234450/Macintosh HD/Applications/MATLAB.app/extern/examples/shrlib/yprime.h, NSUnderlyingError=0x7f91ae358480 "The operation couldn’t be completed. Not a directory"}
1/28/12 12:13:20.758 PM          com.apple.backupd          Error (256): fetching properties: Error Domain=NSCocoaErrorDomain Code=256 "The file “yprime.mexmaci64” couldn’t be opened." UserInfo=0x7f91ae071010 {NSURL=file://localhost/Volumes/JQTimeMachineBackup/Backups.backupdb/Jason%20Qu int%E2%80%99s%20iMac/2012-01-25-234450/Macintosh%20HD/Applications/MATLAB.app/ex tern/examples/shrlib/yprime.mexmaci64, NSFilePath=/Volumes/JQTimeMachineBackup/Backups.backupdb/Jason Quint’s iMac/2012-01-25-234450/Macintosh HD/Applications/MATLAB.app/extern/examples/shrlib/yprime.mexmaci64, NSUnderlyingError=0x7f91ae072e40 "The operation couldn’t be completed. Not a directory"}
1/28/12 12:13:47.893 PM          com.apple.backupd          Error (256): fetching properties: Error Domain=NSCocoaErrorDomain Code=256 "The file “include” couldn’t be opened." UserInfo=0x7f91ae071010 {NSURL=file://localhost/Volumes/JQTimeMachineBackup/Backups.backupdb/Jason%20Qu int%E2%80%99s%20iMac/2012-01-25-234450/Macintosh%20HD/Applications/MATLAB.app/ex tern/include/, NSFilePath=/Volumes/JQTimeMachineBackup/Backups.backupdb/Jason Quint’s iMac/2012-01-25-234450/Macintosh HD/Applications/MATLAB.app/extern/include, NSUnderlyingError=0x7f91ae072050 "The operation couldn’t be completed. Not a directory"}
2. I then tried performing a "full reset" of Time Machine, as explained on Pondini's page. This didn't fix my problem.
3. Finally, I used Disk Utility and clicked "Repair" for my external hard drive --no problems were found. I also selected my internal hard drive (my main drive with OS X on it) and clicked "Verify"; no problems were found.
Any ideas what might be going on? Note that I had emptied about 70 GB of files from my trash and deleted some other movies from my hard drive soon before these problems cropped up.
Thank you very much,
Jason

This issue has been reported a few times, and it's clearly a bug in Time Machine, but I'm not sure what triggers it. TM creates multi-linked directories, and it seems that these links sometimes get broken.
The first thing you should do is a start a new backup set on another drive. You should do that anyway, because one backup isn't enough, even if you're not having problems with it.
Was the MATLAB application one of the items you had deleted from the source volume? If so, and if you're sure you'll never want to restore it from a backup, I suggest you delete it from the TM repository by entering TM, selecting it in a snapshot, and then choosing "Delete All Backups of..." from the action menu (gear icon.) You may have to do the same with other items that are giving the same error.

Restored system from Time Machine backup disk but the system could not start-up

On MacBook Pro early 2008, restored the entire system from Time Machine backup disk to the entire disk.
The previous system on the backup disk had FileVault turned on.
The restore completed successfully and I was prompted to restart the system via the new restored system disk.
I heard the normal start-up sound, then the Apple logo, but it stuck at the logo screen. And the cooling fan run at almost full speed?
I have been waiting for a few hours, guessing it might FileVault the disk.
Finally I have to shutdown the machine as it stuck at the logo screen forever.
Anyone has the same issue? Any ideas?

BTW, I also tried Repair the system disk, Fix permissions via Disk Utility.
I guess I must lose some files either during the backup or the restore.

Time machine backups earliest hour but nothing later?

Similar Messages

Maybe you are looking for