Time Machine backups using a non time capsule drive.

Hello
I have a western digital My Book Essentials 2Tbit external hard drive which is partitioned 1/2 formated for Mac 1/2 for PC. When the hard drive is directly connected to the Mac time machine and the backup work just fine. But once I connect the hard drive to my wireless hub (Netgear N600) Time Machine does not seem to want to use it for back ups.
I can find the drive and folders with the mac. Infact time machine can tell there is a back up on but it still seems to not want to use it for the backup.
I have done the hack of using terminal and typing
defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1.
With this it seems ready to perform the back up but once it tries i receive 'disk image could not be created (error 45)'
Does anyone know how to get this to work??
thanks

I used the same hack for a while but when the drive got full it deleted everything - so I went out and bought a NAS that supported Time Machine. There is another way to do it using a sparse bundle but I've not tried it myself, more about that here: http://pdaddy.wordpress.com/2009/04/04/my-take-on-the-unsupported-time-machine-h ack/
or here: http://hints.macworld.com/article.php?story=20071108020121567

Similar Messages

I have a time machine backup file on a USB hard drive. I bought a time capsule / airport extreme, flat 3TB. I wish to transfer the backup file from the usb hard drive to the time capsule hard drive. 10.6.8

I have a time machine backup file on a USB hard drive. I bought a time capsule / airport extreme, flat 3TB. I wish to transfer the backup file from the usb hard drive to the time capsule hard drive. 10.6.8

Unfortunately, Time Machine backups that are stored on a drive that has been connected directly to a Mac are completely different than Time Machine backups that are stored on a Time Capsule.
Frankly, it is not worth the effort and trouble to try to transfer the old backups to the new Time Capsule.....my opinion....having done this in the past.
It is possible though, but I would not recommend it due to the complexity and downsides involved with this. To give you an idea of how to do this, check out this support article.
http://pondini.org/TM/18.html
Even if you transfer the "old" backups over to the Time Capsule successfully, Time Machine will not simply "add on" to the old backups.
Time Machine will make a new complete backup of your Mac and then add incremental backups from that point.
My advice.....start a new backup on the Time Capsule and move forward. Keep the USB hard drive around for a month, maybe 2 or 3 in case you need to go back to an old backup for some reason. At that time, you will not likely need the old backups at all since you will have a current 2-3 month history of new backups. At that point, you can erase the USB drive and use it for another purpose.

I restored a Macbook Pro from a Time Machine backup and now none of my passwords are working (and I know they are the correct passwords). What can I do?

I restored a Macbook Pro from a Time Machine backup and now none of my passwords are working (and I know they are the correct passwords). What can I do?

First, make sure caps lock is not on.
Another reason why the password might not be recognized is that the keyboard layout (input source) has been switched without your realizing it. You can select one of the available layouts by choosing from the flag menu in the upper right corner, if it's showing, or cycle through them by pressing the key combination command-space or command-option-space. See also this support article.
If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password. In OS X 10.10 and later, this option also works with FileVault, but only if you enabled it when you activated FileVault. It's not retroactive. Otherwise, see below.
Note: If you've activated FileVault, this procedure doesn't apply. Follow instead these instructions.
Start up in Recovery mode. When the OS X Utilities window appears, select
Utilities ▹ Terminal
from the menu bar at the top of the screen—not from any of the items in the OS X Utilities window.
In the window that opens, type this:
resetp
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens. Close the Terminal window to get it out of the way.
Select the startup volume ("Macintosh HD," unless you gave it a different name) if not already selected. You won't be able to do this if FileVault is active.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
 ▹ Restart
from the menu bar.
You should now be able to log in with the new password, but the Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as the login password), there's no way to recover it.

Time machine backups wont move to time capsule

i have two mac minis, one is the mid 2010 model and the the other one is a 2006 model. i have successfuly used superduper to finally move my 500 gigs
of time machine backups to the new time capsule. but the older 2006 model has me lost. i am tempted to go to the applestore to make them copy it
if i follow the directions including resetting time machine the best i can get is a pop up box every hour that says the identity of the time capsule cannot
be verified. this does not show up on the 2010 mini
when i tell it to pick the drive theres 2 other drives that i dont even have! those are "HOME" and "NET" on "localhost" i have no idea where its getting
those drive paths. maybe its my readynas , when i go to /Volumes, there is no home or net folders
another problem i have with time machine is for some strange reason there is a range of backups in an old sparse bundle file and i would like to move all the backups for this computer into one main directory, instead of having to browse old time machines. but when i try to copy from one sprarse bundle to another i get an error saying that the backup files cannot be modified

rigormortis wrote:
if i follow the directions including resetting time machine the best i can get is a pop up box every hour that says the identity of the time capsule cannot
be verified.
Is that the message in #C15 of Time Machine - Troubleshooting? If so, are you selecting Use This Disk? If not, exactly what does it say (or post a screenshot).
another problem i have with time machine is for some strange reason there is a range of backups in an old sparse bundle file and i would like to move all the backups for this computer into one main directory, instead of having to browse old time machines. but when i try to copy from one sprarse bundle to another i get an error saying that the backup files cannot be modified
That's correct; you cannot merge one set of backups into another. A set of TM backups has a complex structure, with things all linked together; you cannot alter it. See How Time Machine works its Magic for an explanation.

Trying to use a new, larger external hard drive for my Time Machine backup. However, every time I start the backup, it gets started then fails. And, I can't delete the few files that did save on the external. Sort of a catch 22. Any ideas?

Trying to use a new, larger external hard drive for my Time Machine backup. However, every time I start the backup, it gets started then fails. And, I can't delete the few files that did save on the external. Sort of a catch 22. Any ideas?

Is it a USB hard drive? USB hard drives have the problem of not giving full speed if they are hooked up on the same bus as keyboards and mice. Double check your profiler to make sure that is not a problem. If it is Firewire, make sure there aren't other firewire devices in use at the same time. I recommend not only keeping a Time Machine backup, but also a clone, and if you do use Time Machine, to make sure the Time Machine drive or partition is at least twice the size of the original drive.

Copy Time machine backup using a different Mac

A friend has a Time Machine backup from an iMac that he sold some time ago. He's concerned that the drive might fail so wants to make a copy of the backup, but doesn't have a Mac at the moment. So he'd like to use my MacBook to copy his backup drive. The backup is about 400GB, my HD is 256GB and he'd like to copy it to a new 1TB drive.
All the answers that I can find to similar questions assume that the Time Machine backup belongs to the Mac making the copy, in this case it doesn't. So is there a way to copy a Time Machine backup using a Mac that wasn't used to create the backup?

Hi ozRob,
If you would like to copy an existing Time Machine backup from one drive to another, you may find the following article helpful:
Time Machine: How to transfer backups from the current backup drive to a new backup drive
http://support.apple.com/kb/ht5096
Regards,
- Brenden

HT201250 After restoring from a time machine backup using migration assistant I can't log in

Hi, I recently bought a Mac Pro and using a Mountain Lion boot disk I made installed a fresh ML install which went fine. During the final part of install it gives you the option of restoring user data etc etc from a time machine backup which I have from my MacBook Pro which again in principal went fine until I went to log in when I got the message 'An error has occurred unable to log into this account a this time'.
Looking on the web I thought at first it was a password issue so restarted with command-r and reset the password, however the same error still occurs. I don't think it is password issue as if you deliberately enter the wrong password it rejects it immediately where as with the correct password it hangs for about 15secs before throwing up the above error.
Can anyone offer any advice?
The only thing I can possibly think of is that on my MBP where the time machine backup is from my home folder is on a 2nd HDD that is not the boot disk and I only have a single HDD on my MacPro.......

You might try to access the desired Time Machine backup from "Browse Other Time Machine Disks" (click Time Machine icon in the Dock).
Also, you might find some help here.

Can I transfer a Time Machine backup to a new empty hard drive, without installing Mountain Lion again?

Can I transfer a Time Machine backup to a new empty hard drive, without installing Mountain Lion on that new hard drive?

Yes - I just did it the other night. Took five hours, but it finally finished and is working great.
I sort of followed the instructions found here -->> http://pondini.org/TM/18.html.
Also, if you want to have dual backups, see -->>
http://pondini.org/TM/27.html.
I say 'sort of' because I used Carbon Copy Cloner to do a block-level transfer. I just didn't want to get hung up with a Finder copy.
Give CCC a try - you have to enable the block copy in Preferences before using this method, but I was quite happy with it. I used it to move over 1TB of TM backups from a FireWire 800 drive to a 2TB Thunderbolt drive. 5 seconds short of taking 5 hours.
It should work well for you.
Clinton

Can I Update Time Machine Backup Without Booting From The Source Drive

Greetings,
Can I update a time machine backup without booting from the original source drive?
My main Macbook Pro internal drive seemed to have died. I had not backed up in months so my Time Machine backup was old.
I replaced the drive with a new one and settled for restoring from the old TM backup because my latest info was on the dead drive and not backed up.
I just plugged the "broken" drive into a dock and it mounted.
It won't boot from the drive but I can mount it and copy from it so far.
I now want to update my Time Machine backup with the info on the 'broken" drive while it's able to be mounted.
How can I accomplish this without booting from the 'broken" drive and running time machine.
Recap...
I need to update a Time Machine backup using another hard drive without booting from the source (as I cannot). Both drives are connected via USB to my MBP and I am booted from another MBP. I want to end up with the newer info from the "broken" drive updating my older Time Machine backup.
Thank You,
SG

Hi
Time Machine will only be able to backup whilst booted into OSX, so unless you can mount the drive, and boot up the OS that is installed on the disk, then no, you will not be able to run a Time Machine backup of that drive.
You could image the drive onto another using Disk Utility
Cheers

How Can I Migrate My Time Machine Backups To A New External Hard Drive?

I have a external hard drive that has 500 GBs left, but I want to buy a larger drive.

ivan wrote:
How Can I Migrate My Time Machine Backups To A New External Hard Drive?
I have a external hard drive that has 500 GBs left, but I want to buy a larger drive.
Hi iVain
Fire up *Disk Utility*, click the Restore tab, then drag your old and new TM drives into the Source and Destination fields. Click Restore, and a complete copy of your old TM files will be made on the new drive. Go to TM preferences and select the new drive, and it will continue backing up just as it left off.
Hope this answers your question. See:
http://discussions.apple.com/thread.jspa?threadID=2595485&tstart=0

Can you use the same external hard drive for Time Machine backups and as an additional storage drive?

I have an external HD that I've been using exclusively for Time Machine backups. I need to clear space on my hard drive, so I was thinking to move music & photos to an external drive. Wondering if I can use the same one I have (which I'll aslo keep using for Time Machine) or if I need to get another drive.

Hi Jossydtaylor,
Time Machine can use either an entire external disk or a partition of that disk:
OS X Mountain Lion: Disks you can use with Time Machine
http://support.apple.com/kb/PH11171
You can use Time Machine with a Time Capsule, and with USB, FireWire, and Thunderbolt disks. The backup disk can be directly connected to your computer or be on a network. If the backup disk has been divided into partitions, you can use one of the partitions.
If the disk is partitioned using the Master Boot Record (MBR) partition type, some partitions may not be available for use with Time Machine. The GUID Partition Table (GPT) partition type is recommended.
For more info on partitioning, see this article:
Disk Utility 12.x: Partition a disk
http://support.apple.com/kb/PH5845
Cheers!
- Ari

How can recover a Time Machine backup deleted from my time capsule?

I made a Time Machine backup from my Time Capsule. Yesterday I entered to my Time Capsule to deleted some files and I made a mistake and deleted my backup time machine and empty the trash of my computer. Is it posible recover that Time Machine Backup? Thank you very much.

For most users, it is not possible to retrieve a file that has been deleted this way.
In order to do so, you would have needed to power off your Time Capsule immediately after the file was deleted. Then, you must open up the Time Capsule and remove the hard drive, place it in a special enclosure, and use special software to try to retrieve the data.
Even if you do this, there is no guarantee that you will be able to retrieve the file.

Time Machine backup via ethernet to Time Capsule

I need to replace my 5 year old FireWire hard disk. I'm considering a Time Capsule and would connect it to my main Mac via ethernet.
Will my iMac see the Time Capsule disk and mount it on the desktop? And can I use it for Time Machine backups when connected with ethernet (rather than AirPort)?
I assume Time Capsule will do the above, but would like to hear from users who's used it like this. Thanks!

I would have to disagree with Smokerz. I've had repeated problems backing up to my airdisk through my AEBS when my computer was connected via an ethernet cable. Backups would go fine for a week or so, then suddenly the DMG wouldn't mount. There was no way to successfully repair it, and I'd have to start over again.
I have several computers on my network, and they were all backing up just fine, except mine, which was connecting with a cable. The others were backing up wirelessly with no problems.
Finally, on a hunch, I disconnected my ethernet cable from my AEBS and opted for using my Airport card. It seemed silly since the computer is right next to the AEBS, but it has been working for nearly a month with no significant errors.
(Before someone asks, I did not have the Airport connection running simultaneously with the ethernet connection. I used only one at a time, and I had them correctly configured with good, working equipment.)
Message was edited by: fletchbiz

Airport Extreme and Time Machine backups using a USB drive

Hi there,
I checked through the threads/FAQ's for an answer to this but couldn't find anything...
I have an AE set up with a USB drive attached as my Time Machine backup drive. When I start my MBP up and initiate a forced backup, Time Machine will go and find my drive (via the AE), mount it and carry out the backup without a problem. However, if I start my MBP up and wait for the scheduled hourly backup, TM doesn't see the drive (or perform the backup) unless I go and manually mount the drive first.
I realise I can put the drive in my login items to auto mount on boot but I wondered if there was a way to get the scheduled backups to work without doing this (as with the forced backups).
Thanks

mattschenker wrote:
Pondini,
Actually, I wasn't thinking about theft. I was just thinking that for security in a possible data-loss "event," it was better to have the backup drive physically separated from the main computer. But maybe that's not necessary.
That's unlikely. A power surge could take out both your Mac and connected external HD. You do have your Macs on good surge protectors or, better yet, U.P.S. systems, right? If not, see [Using a U.P.S. System with a Mac|http://web.me.com/pondini/AppleTips/UPS.html].
But wherever the external HD is, unless it's on a surge protector or U.P.S., it's still exposed.
Other things causing data loss are even less likely to affect your Time Machine drive (especially if there's no other data on it).
Yes, I could hook something up to my Mac Mini. Good point! And that would really keep it separated, since it would be in an entirely different floor. But then again, Time Machine backups done wirelessly would probably take forever.
The first one, yes. But if you have a good WIFI connection, subsequent ones shouldn't take too long or be too obtrusive, except when you've updated a lot of data (like installing an OSX update).
See #22 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum), for setup instructions.
But this just shows that there are a lot of options.
Yes.
I do wish Apple would solve the problem of Time Machine working via the Airport Extreme. That would be my favorite option.
Not likely. Time Machine's been out since Leopard, about 3 years, and backups via an Extreme have never been reliable or supported. Just why they work well on a Time Capsule, or even a USB drive connected to a TC, but not an Airport, is a mystery, but that's the way it is.
But it's always a good idea to keep secondary backups. See #27 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum), for some suggestions.

I deleted my Time Machine backups using Finder, now the trash won't empty

Hello
I've just been to the Apple genius bar and thought this was solved, there the trash emptied no problem. But I realized that the problem has to do with two external drives that have time machine backups on them. I deleted some of the older back ups because my drive was filling up and I didn't see any other way to delete them.
Now they can't be reinstated back where they were, and the trash won't empty using any method. I've even tried the Terminal SUMO methods on here and other sites, and the Trashi It app, and Cocktail app - nothing works.
The only solutions I've found say to wipe your back up drive completely and start over but that is NOT an option as I have ALL of my photos on there. I use my external drive for my images (I am a photographer) and use time machine to back up my MacBookPro onto there as well. I had no idea deleting those was going to be an issue. Now I've tried to delete other things on both external drives and they are all stuck in the trash.
Someone please help!

photogirl67 wrote:
I use my external drive for my images (I am a photographer) and use time machine to back up my MacBookPro onto there as well.
Not a good idea, as you've learned the hard way.
And especially bad in the same partition, as you can't just erase the TM partition.
Plus, how do you back up the images?
For best results, consider getting another external HD; one for the images, and one for TM. Then you can have Time Machine back up both your Mac and the external. See Time Machine - Frequently Asked Question #32 for details and considerations.
But my question for Pondini is this - if I use that command will it erase that entire drive, or just the trash on it?
Just the trash folders. I've reworded those instructions a bit, hopefully more clearly and safely, and put them in #E6 of Time Machine - Troubleshooting.

Time Machine backups using a non time capsule drive.

Similar Messages

Maybe you are looking for