Time Machine can not be found

I recently install Maverick and today my Time Machine Toshiba backup can not be found?

Does it appear in Disk Utility?

Similar Messages

  • HT201250 I disconnected My Passport by mistake, and now Time Machine can not find it.  Although connected, it does not appear in the My Devices section of Finder.  What do I do?

    I disconnected My Passport by mistake, and now Time Machine can not recognise it.  It no longer appears in the My Devices section of Finder.  What do I do?

    Hello rjhc49,
    Thank you for the details of the issue you are experiencing with your external hard drive.  I found an article with steps you can take when an external device is not being recognized.
    I recommend following the steps in the section titled "Top troubleshooting tips" in the following article:
    USB and FireWire Quick Assist
    http://support.apple.com/kb/HT1151
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Time machine can not select my internal hard drive any more.

    Hi all
    Time machine can not select my internal hard drive any more. I only can back up external disks. Does anyone know how to fix this?
    All answers are much appreciated

    I don't know the answer but I have the same thing happen. I have two external drives I use for backup. Sometimes it can see one and sometimes another. Then sometimes it can't see either one.  I will take one out for a while then plug it back in and then it may see it.  Maybe it's a cable issue or something but I will be curious to hear what someone more knowledgeable says. 

  • When i enter time machine with mail open can see past mail .  when i open iPhoto and enter time machine can not see past photos  have i got a problem  ????

    when i enter time machine with mail open can see past mail .  when i open iPhoto and enter time machine can not see past photos  have i got a problem  ????

    iPhoto '11: Restoring from Time Machine with iPhoto '11 (9.2 or later) and OS X Lion 10.7.2 (or later)

  • Time machine can not access time capsule after upgrade from snow leopard to mountain lion

    Two days ago I upgraded my 2009 17" MBP from Snow Leopard to Mountain Lion. That evening my time capsule/time machine combination worked fine and did an incremental backup of about 12 gigabyte. Yesterday - only one day later - the time machine backup did not work anymore.
    It appears that the system can not find the time capsule - even though it shows the remaining free space on the time capsule (so it did find it after all).
    The message is always the same:
    Time Machine can not complete the backup "Time Capsule"
    The image of the backup volume "/Volumes/Data/Pauls MacBookPro.sparsebundle" is not accessable (Error -1).
    I also can not delete the backup image on the time capsule since it is read-only. And I do not want to format the time caspsule yet since my wife's MBAir is also using the same time casule.
    I tried out all kinds of suggestions (hard and soft resetting both the MBP and the TC, entering the password again, setting the TC up again) all to no avail. No backup is possible anymore.

    Mr. Zooot wrote:
    Time Machine can not complete the backup "Time Capsule"
    The image of the backup volume "/Volumes/Data/Pauls MacBookPro.sparsebundle" is not accessable (Error -1).
    I also can not delete the backup image on the time capsule since it is read-only.
    Sounds like you got this message earlier:
    If so, see #C13 in Time Machine - Troubleshooting.
    Offhand, I don't recall anyone not being able to delete one via the Finder (but most were only backing-up one Mac, so just erased the disk).
    You may have to wait for that message to appear again (24 hours later), or you might try holding Alt/Option with the TM icon in the menubar, and select Verify Backups if it will let you.

  • Time machine can not back up

    Every time I try and back up to an external drive in time machine on Lion it starts the back up and then ejects the drive and I get a message that the back drive can not be found. When this happens the drive does not even appear in Drive setup. However if I mount the drive on the computer and do not use it fro time Machine it sits there quite happily.
    Help!

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
    If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Some personal information, such as the names of your files, may be included — anonymize before posting.

  • I have reinstalled snow leopard 10.6.8 and want to restore my i photos from time machine. can not find iphoto libary in time machine, can"t not find home-pict. iphoto lib.  in time machine

    i have reinstalled snow leopard 10.6.8,  and want to restore my i photos from time machine. Can not find i-photo libary in time machine, can't not find > home-pict. iphoto lib.  in time machine. Please help.

    On my HD it does not say ,restore, in yourname -pict. Iphoto lib.,
    On the time machine, it , yourname etc, oes not show up at all.
    Only right side of TM, your name etc. does not show.

  • HT3275 Time machine can not be entered when prompted

    For some reason time machine does not react when I want to enter to find a past file version. Any suggestions what to do? Thanks.

    Yay I solved it! Looking around I found a link to this website http://pondini.org/TM/Troubleshooting.html following the steps posted on it helped to fix the problem. This site is a big help, thanks.

  • HT201250 Time Machine can not backup....What is sparsebundle?

    I keep getting this message:
    Time Machine could not complete the backup
    The backup disk image “/Volumes/JDeyTime Capsule/JDey MacBook Pro 17".sparsebundle” is already in use.The backup disk image “/Volumes/JDey Time Capsule/JDey MacBook Pro 17".sparsebundle” is already in use.
    What does this mean??? How can I fix this??

    I keep getting this message:
    Time Machine could not complete the backup
    The backup disk image “/Volumes/JDeyTime Capsule/JDey MacBook Pro 17".sparsebundle” is already in use.The backup disk image “/Volumes/JDey Time Capsule/JDey MacBook Pro 17".sparsebundle” is already in use.
    What does this mean??? How can I fix this??

  • My Time machine can not backup as the backup disk image " . . . .sparsebundle" is already in use. ??

    my time machine is giving me an error message that says "The backup disk image "voumes/data/..........sparse.bundle" is already in use. Time machine has not completed successful backup for over two weeks.

    First, restart your Mac and the Time Capsule. In most of the cases, this will solve the problem.
    If it doesn't work, see > http://pondini.org/TM/C12.html
    If necessary, scroll down to section C, comment 12.

  • Time Machine can not be mounted - external drive

    I have an external Maxtor USB drive that's been my time machine since forever. Yesterday I noticed that it's not mounting. I KNOW it was mounting the day before because I had to use it. But now the drive is not mounting, and I don't know why.
    The drive is on, the light is on, but it's not mounting. Out of curiosity, my husband hooked it up to his Vista PC and he was able to browse to it all dandy. But then back on my computer, it's not being recognized.
    It's not showing up in disk utility, though my other external drive, my iphoto drive, is having no problems. It's not the USB port, as my ipod works on either port, as does my iphoto drive.
    Can anyone help?
    I've unplugged it, plugged it back in. Rebooted the computer without it attached.

    I solved my problem. I tried plugging it into another computer and it popped up on the screen. AHA! Before I tried that, I had ONLY unplugged the drive but had NOT crawled under the desk to unplug it from the main power source. It just needed to be TOTALLY unplugged and left alone for a few minutes. Those little green men obviously can bunch up anywhere and need a total disconnect, for several minutes at least, to unbind. Ahh, sort of like un-constipating the system?
    KC
    Message was edited by: KCChoirgirl

  • Time Machine - can not 'Enter Time Machine'

    Back ups seem to prepare and progress and complete successfully and are visible on the TM Drive.
    Everything worked fine, and then one day, I can not remember if there was anything I did or installed that may have changed this, as one does not know to check it all the time, other than to see the cool transition...
    When I click on 'Enter Time Machine' or on the TM Icon in the dock, The screen flashes once, a window of desktop contacts flashes once, and then finder restarts with nothing having happened. It does not enter the Time Machine GUI.
    I have searched high and low on discussions, no-one seems to have encountered this before. What can I do ? Anyone seen this , Any Ideas ?

    tibbs01 wrote:
    Oh dear, no response to my post.
    Mmmmm how will i ever get time machine to work again ?
    I don't want to re-install the Mac Os.
    you don't want to but you might have to. I've never seen anything like what you describe. you can try reselecting the TM drive in TM preferences and see if that does anything (I expect not). you can also try setting up TM with a different drive and doing a full backup. see if it works there. if it doesn't, I don't see any options besides reinstalling.
    P.S. do you have any antivirus software? use Filevault?

  • Time Machine Can Not Backup

    At first the error was that the sparsebundle was in use. Manually deleting got it working for a short time, but then I got other, more general errors.  Including ones saying there was no space on the TC, which makes no sense since it's supposed to delete old backups automatically to make space (both my HD and my TC hold 1 TB and the HD is only half full).  Rebooting Apple Time Capsule led to a several days long backup attempt then it failed.  Now it just fails when I try to backup. 
    "Backup Failed.  Time Machine couldn't back up to "Cyndi's Time Capsule."
    Running Mavericks (10.9.3) on MacBook Pro, connection via ethernet.  TC firmware is 7.6.4 (I updated it as part of my troubleshooting).
    I'm assuming I need to do a wipe or reformat of the Time Capsule and start from scratch.  But I want to make sure that one, that's the right thing and two, that I do it correctly.
    Any Mavericks-specific advice is welcome.
    Thanks,
    Cyndi

    Mavericks latest update was supposed to fix all these problems.. and pigs might also grow wings and fly.
    The TC you have is fairly old.. at least 3years. And maybe up to 6years..
    What model is it.. A1xxx from the base??
    If it is earlier than Gen3.. ie A1355, my advice is to simply replace it.
    For a Gen3 it can be worth the effort to see if it will be reliable but know you are living on borrowed time. This model used a less than super reliable hard disk. And the hardware can just breakdown. So 3years is getting to be end time marker for stuff.
    Format the disk may be necessary.. I am not sure.
    But you certainly need to do a factory reset.
    1.
    The Factory Reset universal
    Unplug your TC/AE. Hold in reset. and power the TC/AE back on..  all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
    Release reset.
    If it doesn’t flash rapidly you have released reset at some point and try again.
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
    No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    2. Redo the setup with airport utility.
    Give the TC all SMB compatible names.. That simply means names that are short.. no spaces and pure alphanumeric.
    eg Your current name fails. "Cyndi's Time Capsule"
    It has spaces and an apostrophe.
    I recommend a name like TCgen3
    For wireless use TCwifi
    Anything you like as long as it follow the rules.. short, less than 10 characters is excellent.. make 20 tops. No spaces and purely alphanumeric.
    3. Manually mount the TC.
    In Finder use Go, Connect to server.
    Type in the address.
    AFP://TCname.local (Where TC name is the new short name. Local is the default domain and seems to help).
    or. Even Better if the TC is setup as main router or with static IP.
    AFP://10.0.1.1 (this is the default IP of the TC.. type in its IP address but that means it has to be fixed.)
    When you do the above you will be asked for a password.. type that in.. public by default. But the new setup may force you to change it.
    Don't forget to save it in your keychain.
    4. Make sure ipv6 is set to link-local.
    eg for wireless in the network preferences on the computer.
    5. You might still need to keep things awake now and then by rebooting the TC.. if Mavericks forgets where the TC lives just pull the power cord.. count to 10 and plug back in. If it happens once a week.. it is merely annoying.. more often than that.. well I would start seeking another backup means altogether.
    I also btw think a Gen3 TC or earlier is going to work better on 7.5.2 firmware. If the above happens I would try the downgrade.. easy to do in v6 utility.. simply hold down the option key while clicking version.
    You might need to click other to pick up earlier ones.. but 7.6.1 is certainly more stable than 7.6.4

  • Time Machine can not complete the backup...what's up?

    I'm getting this error message which keeps me from backing up: "The backup disk image "/Volumes/Data/....sparsebundle" could not be accessed (error -1)."

    I have not found a long-term solution (fix), but in my case the volume where the Time Machine backup should occur usually is mounted on the desktop but not as a shared volume (incidated as a drive with the people holding hands superimposed over the drive icon). If I drag the drive to the trash (unmount it), the next time Time Machine is scheduled to run, it completes successfully.

  • Time Machine can not connect to NAS

    Hi
    I want some help,because I buy the thecus NAS,I Use the time Machine connect to NAS,when I first connect NAS Machine,the Host and IP is response
    but when I click the Host,the stop symbol is display,so I can not do any thing for the backup,please give me any commit(ps. the MAC OS is 10.6.6 ,NAS is use the netatalk AFP) ,but use QNAP and  synology NAS have same question
    Oscar

    Some NAS devices are compatible with Time Machine, some aren't.  Even with the ones that are compatible now, there are some downsides to the combination.
    See the pink box in #2 of Time Machine - Frequently Asked Questions.

Maybe you are looking for