Time Machine crashes every time after the computer sleeps or goes into screen saver for a period of time
Time Machine works for me about 90% of the time, until I leave the computer alone for over a hour it seems and gets into the late screen saver stage or goes to sleep. After it does this Time Machine will not work, yet the hard drive is still fully fuctional. Please Advise.
Time Machine works for me about 90% of the time, until I leave the computer alone for over a hour it seems and gets into the late screen saver stage or goes to sleep. After it does this Time Machine will not work, yet the hard drive is still fully fuctional. Please Advise.
Similar Messages
-
I just backed up my mac to an external hard drive using Time Machine. What would happen if I turn Time Machine off and then plug the external hard drive back into my computer?
What I am ultimately wanting to do is make more room on my computer by backing up all of my files onto the external hard drive and then deleting them off of my computer. However, neededing to be able to retrieve them from the external hard drive later down the road.
From what I have read and am trying to understand, is that I probably shouldn't have used time machine. I need to use the external hard drive like a basic flash drive where I can put things on and get things off without having it automatically update through time machine everytime I connect it to my computer.
Not tech savvy at all and barely understand basics. I need very simple and easy to understand explanations.sydababy wrote:
and then deleting them off of my computer.
BIG BIG MISTAKE ..... youre making a linchpin deathtrap for your data trying to shove everything on a single fragile HD.
Dont suffer the tragedy other people make, buy another or 2 more HD, theyre cheap as dust.
The number of people who have experienced terror by having a single external HD backup is enormous. One failure that WILL HAPPEN, and kaput,......all gone!
Dont do it, its all about redundancy, redundancy, redundancy.
follow here:
Methodology to protect your data. Backups vs. Archives. Long-term data protection
Deleting them off your computer is fine....having only ONE copy is extremely BAD.
The Tragedy that will be, the tragedy that never should be
Always presume correctly that your data is priceless and takes a very long time to create and often is irreplaceable. Always presume accurately that hard drives are extremely cheap, and you have no excuse not to have multiple redundant copies of your data copied on hard drives and squirreled away several places, lockboxes, safes, fireboxes, offsite and otherwise.
Hard drives aren't prone to failure…hard drives are guaranteed to fail (the very same is true of SSD). Hard drives dont die when aged, hard drives die at any age, and peak in death when young and slowly increase in risk as they age.
Never practice at any time for any reason the false premise and unreal sense of security in thinking your data is safe on any single external hard drive. This is never the case and has proven to be the single most common horrible tragedy of data loss that exists.
Many 100s of millions of hours of lost work and data are lost each year due to this single common false security. This is an unnatural disaster that can avoid by making all data redundant and then redundant again. If you let a $60 additional redundant hard drive and 3 hours of copying stand between you and years of work, then you've made a fundamental mistake countless 1000s of people each year have come to regret. -
Time Machine crashes external HD coming out of sleep mode
I have a new iMac OS 10.7.3
I am using a SeaGate 1.5 TB external HD for backup.
If I leave the computer on continous everything works fine. It backs up every hour. It has been running fine for over a week.
If I set the iMac in energy saver mode, say 10 minutes, when the iMac comes out of sleep mode there is a warning that Time Machine failed.
I get the following errors messages:
"Time Machine could not complete the Backup"
"Error while creating the Backup Folder"
There is no way to correct it or retry. I have to run disk utility and erase the external HD, re-format, then back everything again.
I would prefer to use the energy save feature of the iMac if I could.
I tried the Apple Support number and they just said leave the iMac in "energy saver NEVER" so the iMac stays on continous.
Any ideas???
Anyone able to let their IMac go in sleep mode with Time Machine turned on???
It seems like a possible bug with 10.7.3???
Tom.........Pondini,
As far as I can tell the Seagate stays up. While the iMac is in sleep mode the Seagate is still running with all lights on.
I will try contacting Seagate.
I am still hoping someone else has an external HD that works with Time Machine. I did a search and several other people seem to be having similar problems like me.
Tom....... -
PowerMac G5 hangs after going into screen saver power save mode
I have a PowerMac G5 and it's been working fine, but as of late has been hanging. I had a couple of external disks on the machine ( Maxtor OneTouch II and a OneTouch III). I recently added two more OneTouch III and stripped the three OneTouch III's together in a RAID set. I'm wondering if that is causing the hangs, but I've also seen it hang without the RAID so I'm not convinced it's the RAID.
Anyway, I can't figure out what's causing it to hang, but it seems to hang at some point after the screen saver runs and then the screen goes into power saver mode. It's not hung right when it shuts down the monitor, but at some point after that.
When it gets in this mode, I can't remotely login using ssh and I can't seem to wake it up. What I end up having to do is to hold the power button down for several seconds until the machine powers off.
In an attempt to see what's going on, I set the OS X monitor power save mode to "never", but I don't think I left it that way long enough and I never saw it hang.
Does anyone have any debugging tips that would help me identify the culprit?I've been having the same troubles lately. Seem
since the JAVA update. It hangs completely after the
screen is shut down. Every morning I have to reboot
with the power button.
I am also joining the crowd with this issue. I have a 15" Powerbook G4 that has acted normally until recently. Not sure exactly when it started, but about the same time as the recent updates. Similar behavior to the previous forum posts.
When I manually put the laptop to sleep it freezes up before it sleeps and the multi-language reboot warning comes up. This also happens if it is set to auto-sleep after xx minutes.
When I try to wake it up, the screen is black and the power light shows it is on and it never unfreezes or I get the reboot message.
I have tried everything I can think of to troubleshoot this. I just re-installed the 10.4.8 update over the exisiting one (using an external boot drive made with SuperDuper) and it still happens... BUT when I put the laptop to sleep with the startup drive being external, it seemed to behave properly. I can't figure this out since the external clone was made only minutes earlier from the laptop... and it works. I have zapped PRAM, and done the battery removal / power button reset.
Below is the "report" I have been getting - and sending to Apple. They must be getting tired of the many I have sent.
Any thoughts out there?
Thanks.
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000020 PC=0x00000000002FA2A4
Latest crash info for cpu 0:
Exception state (sv=0x32E70000)
PC=0x002FA2A4; MSR=0x00009030; DAR=0x00000020; DSISR=0x40000000; LR=0x002E31B0; R1=0x1793BCD0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x002E31B0 0x002AE920 0x002F2EF4 0x0003C884 0x000A9314
Proceeding back via exception chain:
Exception state (sv=0x32E70000)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x2D24BC80)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 8.8.0: Fri Sep 8 17:18:57 PDT 2006; root:xnu-792.12.6.obj~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x00095138 0x00095650 0x00026898 0x000A7E04 0x000AB780
Proceeding back via exception chain:
Exception state (sv=0x32E70000)
PC=0x002FA2A4; MSR=0x00009030; DAR=0x00000020; DSISR=0x40000000; LR=0x002E31B0; R1=0x1793BCD0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x002E31B0 0x002AE920 0x002F2EF4 0x0003C884 0x000A9314
Exception state (sv=0x2D24BC80)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 8.8.0: Fri Sep 8 17:18:57 PDT 2006; root:xnu-792.12.6.obj~1/RELEASE_PPC
Model: PowerBook5,8, BootROM 4.9.5f3, 1 processors, PowerPC G4 (1.5), 1.67 GHz, 1 GB
Graphics: ATI Mobility Radeon 9700, ATY,RV360M11, AGP, 128 MB
Memory Module: SODIMM0/J20STANDARD, 1 GB, DDR2 SDRAM, PC2-4200S-444
AirPort: AirPort Extreme, 405.1 (3.90.34.0.p18)
Modem: Jump, , V.92, Version 1.0,
Bluetooth: Version 1.7.8f2, 2 service, 0 devices, 1 incoming serial ports
Network Service: Built-in Ethernet, Ethernet, en0
PCI Card: pci106b,4318, sppci_othernetwork, SLOT-A
PCI Card: TXN,PCIXXXX-00, cardbus, PC Card
PCI Card: usb, usb, USB20
PCI Card: usb, usb, USB20
PCI Card: usb, ehci, USB20
Parallel ATA Device: Hitachi HTS721010G9AT00, 93.16 GB
Parallel ATA Device: MATSHITADVD-R UJ-846,
USB Device: Bluetooth HCI, , Up to 12 Mb/sec, 500 mA
USB Device: Apple Optical USB Mouse, Mitsumi Electric, Up to 1.5 Mb/sec, 500 mA
USB Device: Apple Internal Keyboard / Trackpad, Apple Computer, Up to 12 Mb/sec, 500 mA
15" G4 PowerBook 1.67 Mac OS X (10.4.8)
G5 2.7 Gig Mac OS X (10.4.4) 3 Gig ram
15" G4 PowerBook 1.67 Mac OS X (10.4.8) -
using Mac OS X 10.6.7. 3.06 ghz intel core 2 duo, 4 gigs ddr3 ram. Firefox 5.0.
All crash report signatures say js::RegExp::execute. All these crashes have been spread from today to the 27th of June.
There seems to be no consistency as to what websites it crashes on. Sometimes it crashes with several tabs up, sometimes only one. Sometimes on tumblr or twitter, sometimes on livejournal, sometimes elsewhere.using Mac OS X 10.6.7. 3.06 ghz intel core 2 duo, 4 gigs ddr3 ram. Firefox 5.0.
All crash report signatures say js::RegExp::execute. All these crashes have been spread from today to the 27th of June.
There seems to be no consistency as to what websites it crashes on. Sometimes it crashes with several tabs up, sometimes only one. Sometimes on tumblr or twitter, sometimes on livejournal, sometimes elsewhere. -
It especially happens when I am in the Walden University website.
Hello & welcome, let's see if we can help out here!
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab of Activity Monitor, are there a lot of Pageouts? -
With lion the windows reopen after the computer sleeps. How do you turn this feature off?
Is there away to turn off the reopen windows feature
It is one of the over 250 new features of the World's Most Advanced Operating System called Resume.
When choosing Restart, Sleep or Shutdown there is a checkbox you can uncheck to prevent the apps from launching.
Also in System Preferences > General there is a hard-to-find checkbox under "Number of recent items" you can turn off.
If you want to turn it off on a per app basis, (TextEdit is by example, replace TextEdit with the name of the app)
Launch Terminal and copy/paste this at the prompt...
defaults write com.apple.TextEdit NSQuitAlwaysKeepsWindows -bool false
Press return.
To turn off Resume globally...
chflags uchg ~/Library/"Saved Application State"
Press return
The reverse of the first one is to replace false with true.
The reverse of the second one is
chflags nouchg ~/Library/"Saved Application State" -
Time machine back up problem after new hard drive install
After having my hard drive replaced I restored using time machine (Seagate backup drive) There are 2 users of this iMac. After restoring I seem to have all my stuff back but the other user has nothing, no pics etc. I assumed that time machine backed up everything on the computer. Is it possible that it only backed up my data? If not, how do I restore the other users data. Appreciate any help with this!
How did you restore the computer? If you used migrate it is important you prepared the computer correctly. If you already setup the user name that pre-existed on the old hard disk migrate will not work properly.. you cannot restore to the same username. So you might need to do the restore again.. (migrate but to a different location eg a USB drive and pick up the files from there).. TM should backup all users that previously were on the computer.. but how you restored will affect how it behaves now.
-
How to stop my Time Machine external hard drive preventing iMac from sleeping?
I have a late 2012 iMac, and have discovered that sometimes (I haven't noticed a pattern of when it doesn/doesn't happen) the computer will immediately wake up after I set it to Sleep (Apple Menu>Sleep). Through elimination I have found that it is the the USB 3.0 external hard drive I use as a Time Machine back-up that is the culprit; unplugging it then allows the computer to sleep. If I unplug it, then plug it back in later on, this normally solves the problem for a while, but not forever. This same Hard Drive didn't cause the wake problem on my previous '08 iMac.
A big issue is that when the machine immediately wakes from sleep, the display stays off (until I move the mouse) - this is good from a power saving point of view, but means I don't know if/when the machine is immediately waking from sleep (I have to listen to the fan when setting it to Sleep mode to hear if it has actually woken back up).
I've searched the forums, but can't find another poster with the same problem as myself. Can anyone advise a course for me to pursue to prevent this from happening?
Thanks. JamieHi Frank. Nope, I'm still having the same symptoms; the plugged in external drive (TIme Machine) will wake the machine up a couple of seconds after it winding down when put to into sleep mode. Ejecting the drive and then sleeping the machine works. After plugging it in again to do a Time machine backup, it will allow the computer to sleep soundly for the first few sessions (eg a few days of sleeping, waking, sleeping, waking, etc), but then it will then suddenly start preventing it from sleeping again after a while.
It seems I'm fortunate in my case that the display stays dark (or off?) when the machine has been woken from sleep, but this was actually preventing me from knowing the machine wasn't in fact asleep for quite some time; I only eventually cottoned on because there wasn't any delay when 'waking' my machine (which there normally is). I would then have to carefully listen to the spinning fans to know if in fact it had gone to sleep or not.
So, to summarise, unfortunately no, I haven't solved this yet. If anyone else has a solution, please let us know?
Also, I've noticed occasionally after waking that there is a relatively quiet 'crackle' sound (kind of electrical sounding) from the bottom-right area of the machine. This goes on every so often for about 30mins. I see this is also an issue with other people's late 2012 iMacs, but I've not seen if anyone has a solution to it? -
Time Machine backup fails on external HD when sleeping
Hello,
I have recently purchased a MBPw/RD and also purchased a WD My Passport for MAC to use with Time Machine. The reason that I purchased this drive is for the hardware encryption feature of the drive. Time Machine completes without error when the computer is not sleeping but after TM is scheduled to run during sleep I get a message in console that shows the following.
4/11/13 3:36:04.994 AM com.apple.backupd[1924]: Error determining directory contents for /Volumes/My Passport for Mac: Error Domain=NSCocoaErrorDomain Code=256 "The file “My Passport for Mac” couldn’t be opened." UserInfo=0x7f9ada808160 {NSFilePath=/Volumes/My Passport for Mac, NSUserStringVariant=(
Folder
), NSUnderlyingError=0x7f9ada8081d0 "The operation couldn’t be completed. (OSStatus error -36.)"}
I have the hardware encryption enabled on the drive and have selected that the key be stored in my Keychain so that when i log on to this computer the drive will be accessible. I have tested that feature and it works. It just does not write to the drive when it awakes from sleep. I have read for two days on these forums and have tried a few suggestions that I thought may have worked but they didn't. I am also new to MAC. Are there any suggestions that someone can give me to resolve this issue?
ThanksAfter reviewing the console i notice an entry before the backup which reads the following:
4/11/13 3:05:31.981 AM com.apple.time[11]: Requesting maintenance wake [Backup Interval]: <date: 0x7f9661d0a860> Thu Apr 11 03:21:41 2013 CDT (approx)
Maybe it was not asleep, I don't know at this point. I will try to contact WD support, hopefully their MAC division is not anything like their PC faction. -
After having the logic board replaced due to bad NVidia chip, my Time Machine will no longer backup my computer to the current backup. Is there a way to reset something to get Time Machine to continue to use the same backup files as before for this laptop?
As far as TM is concerned you have a new computer, so it will make a new backup. If you don't have the space for both backups then erase your backup drive before backing up the computer.
-
Time Machine crashes whenever the computer goes to sleep or into screen saver mode.
Apologies if there is an obvious answer or post about this. Every time I try to initialize Time Machine, it will begin backing up until the computer goes to sleep or the screen saver kicks in. When I wake the computer up, I get a message that says "The backup was not performed because an error occurred while copying files to the backup disk." The message also tells me that the problem might be temporary and to try Disk Utility to repair the backup disk if the problem persists.
When I run Disk Utility, I am told that the volume cannot be repaired and that it needs to be reformatted. I reformat the disk, try to run Time Machine again, and get the same problem whenever the computer goes to sleep or into screen saver mode. Lather, rinse, repeat.
I managed to get an initial backup only if I turned off the screen saver and the sleep function. However, once I turned them back on, I ran into the same problem when Time Machine tried to update the backup.
I am running OS X v.10.6.8 on an iMac5,1. The backup is a Toshiba 1TB USB external HD. I saw this same problem posted in the Lion forum (and I cribbed the title of this post from there). Nobody has offered a solution yet, but it was a very recent post.
Thanks in advance.Oh yeah I forgot to say I use an ETHERNET connection.
-
Why does "enter time machine" crash my computer?
The title is pretty descriptive. The "crash" is that I get the spinning beach ball of death and over the course of a few seconds my machine becomes completely non-responsive to input (keystokes stop working, then the wiggling the mouse stops working). I have do hold down the power button to reset the machine after that. Although I'm quite familiar with http://pondini.org/OSX/Home.html I don't see that anything readily addresses "Time Machine crashes my whole OS". Any ideas? Thanks!
Here a log of what happens. I got this same effective log in two different situations: first when I ran an attempted backup, then again basically the same when I changed the computer name and tried again. That second attempt is probably pretty telling since there is no sparsebundle with the new computer name, meaning the error of "diskimagealreadyattached" cannot be true.
Starting standard backup
Attempting to mount network destination URL: afp://[email protected]/timecapsule
Mounted network destination at mountpoint: /Volumes/timecapsule using URL: afp://[email protected]/timecapsule
Disk image already attached: /Volumes/timecapsule/computer_dying.sparsebundle, DIHLDiskImageAttach returned: 35
Running backup verification
Disk image already attached: /Volumes/timecapsule/computer_dying.sparsebundle, DIHLDiskImageAttach returned: 35
Backup verification incomplete!
Disk image already attached: /Volumes/timecapsule/computer_dying.sparsebundle, DIHLDiskImageAttach returned: 35
Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x7faf9305d400 {MessageParameters=(
Ejected Time Machine network volume.
Waiting 60 seconds and trying again.
Attempting to mount network destination URL: afp://[email protected]/timecapsule
Mounted network destination at mountpoint: /Volumes/timecapsule using URL: afp://[email protected]/timecapsule
Disk image already attached: /Volumes/timecapsule/computer_dying.sparsebundle, DIHLDiskImageAttach returned: 35
Running backup verification
Disk image already attached: /Volumes/timecapsule/computer_dying.sparsebundle, DIHLDiskImageAttach returned: 35
Backup verification incomplete!
Disk image already attached: /Volumes/timecapsule/computer_dying.sparsebundle, DIHLDiskImageAttach returned: 35
Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x7faf93507310 {MessageParameters=(
Ejected Time Machine network volume.
Waiting 60 seconds and trying again.
Attempting to mount network destination URL: afp://[email protected]/timecapsule
Mounted network destination at mountpoint: /Volumes/timecapsule using URL: afp://[email protected]/timecapsule
Disk image already attached: /Volumes/timecapsule/computer_dying.sparsebundle, DIHLDiskImageAttach returned: 35
Running backup verification
Disk image already attached: /Volumes/timecapsule/computer_dying.sparsebundle, DIHLDiskImageAttach returned: 35
Backup verification incomplete!
Disk image already attached: /Volumes/timecapsule/computer_dying.sparsebundle, DIHLDiskImageAttach returned: 35
Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x7faf93060170 {MessageParameters=( -
Time machine only ever backed up the first time it runs immediately after I start up my computer after it has been shut off. All other back up attemps fail. Recently it stopped recognizing the icon for my external hard drive in the time machine dialog window where you select the hard drive to back up to, and turn on and off the time machine function. Now the external HD icon only shows up on the desk top but no longer in the dialog box. I just tried shutting the computer off and turning it on again and now the light is on, on the external hard drive but the icon does not even appear on the desk top.
The external hard drive is a 1TB Seagate. The drive still has plenty of unused capacity. I ran a diagnostic test on it. It said the disk needed repair but the repair function would not work. The message stated that it could not be unmounted and repair is not available because the disk can't be written to. The Mac OX utility said the disk can still be opened but can't be changed nor repaired. The external HD is not S.M.A.R.T. supported.
I haven't tried replacing the cable yet. Is that the next thing I should try?What Mac OSX version are your running ("iOS" as shown in your profile cannot run on a Mac computer)?
-
Time machine crashes after Yosemite upgrade
I recently upgraded to Yosemite 10.2.2. on a mid-2010 MacBook, but am having problems backing up using TimeMachine.
I can access my past backups, which is good news, although I need to select one of the disks being backed up in the left column of the finder window (if I just select my username it doesn't seem to work). However, when I attempt a backup the computer crashes during the beginning of the backup process ("Processing backup"). I don't get any particular error message when Time Machine crashes, the computer just restarts and sometimes I will get an error message once the computer has finished restarting indicating that the computer restarted because of a problem.
I back up onto a non-Apple (Seagate) connected to the WiFi network drive, which has been working well for about 6 months under the previous OS.
Anyone have any thoughts on this? I've run the disk utility to repair disk permissions, removed the network disk as backup then re-added.And here is the Problem Details and System Configuration in case its helpful:
Anonymous UUID: B73BF844-60BD-9880-938A-BEF0C404EA33
Thu Jan 29 23:20:29 2015
*** Panic Report ***
panic(cpu 1 caller 0xffffff8019735d11): "hfs_UNswap_BTNode: invalid backward link (0x00012299 == 0x00012299)\n"@/SourceCache/xnu/xnu-2782.10.72/bsd/hfs/hfs_endian.c:303
Backtrace (CPU 1), Frame : Return Address
0xffffff8085e63030 : 0xffffff801932fe41
0xffffff8085e630b0 : 0xffffff8019735d11
0xffffff8085e63100 : 0xffffff8019726327
0xffffff8085e63130 : 0xffffff801957b5e5
0xffffff8085e63240 : 0xffffff801957aa5a
0xffffff8085e632f0 : 0xffffff8019578ff4
0xffffff8085e63340 : 0xffffff801975e7b1
0xffffff8085e63370 : 0xffffff8019763cd0
0xffffff8085e63430 : 0xffffff80197429ba
0xffffff8085e63550 : 0xffffff8019570cb6
0xffffff8085e635e0 : 0xffffff80197ac9d8
0xffffff8085e63f50 : 0xffffff801984b386
0xffffff8085e63fb0 : 0xffffff8019436e86
BSD process name corresponding to current thread: mds_stores
Mac OS version:
14C109
Kernel version:
Darwin Kernel Version 14.1.0: Mon Dec 22 23:10:38 PST 2014; root:xnu-2782.10.72~2/RELEASE_X86_64
Kernel UUID: DCF5C2D5-16AE-37F5-B2BE-ED127048DFF5
Kernel slide: 0x0000000019000000
Kernel text base: 0xffffff8019200000
__HIB text base: 0xffffff8019100000
System model name: MacBook7,1 (Mac-F22C89C8)
System uptime in nanoseconds: 3182901727712
last loaded kext at 3016699200744: com.apple.filesystems.afpfs 11.0 (addr 0xffffff7f9bfb2000, size 364544)
last unloaded kext at 338817335836: com.apple.filesystems.msdosfs 1.10 (addr 0xffffff7f9bf3a000, size 61440)
loaded kexts:
com.apple.filesystems.afpfs 11.0
com.apple.nke.asp-tcp 8.0.0
com.apple.filesystems.smbfs 3.0.0
com.apple.driver.AppleBluetoothMultitouch 85.3
com.apple.driver.AudioAUUC 1.70
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AGPM 100.15.5
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.3.2f6
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleMikeyDriver 269.25
com.apple.driver.AppleHDA 269.25
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.driver.AppleLPC 1.7.3
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.GeForceTesla 10.0.0
com.apple.driver.AppleBacklight 170.5.0
com.apple.driver.AppleMCCSControl 1.2.11
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.2f6
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleHV 1
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.iokit.SCSITaskUserClient 3.7.3
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.7.0
com.apple.driver.AirPort.Brcm4331 800.20.24
com.apple.nvenet 2.0.22
com.apple.driver.AppleUSBHub 705.4.2
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleAHCIPort 3.1.0
com.apple.driver.AppleUSBEHCI 705.4.14
com.apple.driver.AppleUSBOHCI 656.4.1
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
com.apple.security.SecureRemotePassword 1.0
com.apple.driver.AppleMultitouchDriver 262.33.1
com.apple.AppleGraphicsDeviceControl 3.8.6
com.apple.kext.triggers 1.0
com.apple.driver.AppleBluetoothHIDKeyboard 176.2
com.apple.driver.IOBluetoothHIDDriver 4.3.2f6
com.apple.driver.AppleHIDKeyboard 176.2
com.apple.iokit.IOSerialFamily 11
com.apple.driver.DspFuncLib 269.25
com.apple.kext.OSvKernDSPLib 1.15
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.driver.AppleHDAController 269.25
com.apple.iokit.IOHDAFamily 269.25
com.apple.iokit.IOAudioFamily 203.3
com.apple.vecLib.kext 1.2.0
com.apple.nvidia.classic.NVDANV50HalTesla 10.0.0
com.apple.nvidia.classic.NVDAResmanTesla 10.0.0
com.apple.driver.AppleBacklightExpert 1.1.0
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.2f6
com.apple.iokit.IOSurface 97
com.apple.iokit.IOBluetoothFamily 4.3.2f6
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.8.1d38
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleSMC 3.1.9
com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.3
com.apple.driver.AppleUSBMultitouch 245.2
com.apple.iokit.IOUSBHIDDriver 705.4.0
com.apple.iokit.IOUSBMassStorageClass 3.7.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.3
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.3
com.apple.iokit.IO80211Family 710.55
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.7.5
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOUSBFamily 710.4.14
com.apple.driver.NVSMU 2.2.9
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 396
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.Libm 1
com.apple.kec.pthread 1
Model: MacBook7,1, BootROM MB71.0039.B0B, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.60f6
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x0198, 0x393930353432382D3032362E4130314C4620
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x0198, 0x393930353432382D3032362E4130314C4620
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.24)
Bluetooth: Version 4.3.2f6 15235, 3 services, 27 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: TOSHIBA MK2555GSXF, 250.06 GB
Serial ATA Device: HL-DT-ST DVDRW GS23N
USB Device: Ext HDD 1021
USB Device: Built-in iSight
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
Thunderbolt Bus:
Maybe you are looking for
-
ORABPEL-11811 - Error while calling PL/Sql API Into BPEL Process
Hi, I have created a BPEL Process for creating a Order in Oracle using the synchronous process. I have followed the below steps. 1) Created a Stored procedure using the Order Creation API's by passing Recard Type IN parameters. 2) Created Synchronous
-
Exchange rate and PO printing form
Hi Experts I hale problem with PO printing form. I have to add one field to layout. Itu2019s exchange rate. We have price condition defined in inforecord in USD. This price is change to local currency, and based on this system calculated value of t
-
Hi, A disc is stuck in my iMac DVD drive. It will spin and sound like its about to eject but the disc will not come out. My iMac will read and play the disc but I just can't fully eject it. Any help is greatly appreciated.
-
Adobe, add tag feature for symbian 60!!!
adobe reader for symbian 60 is nearly useless because it requires reader to scroll left and right. There are serveral earlier posts on the tag issue, but adobe does not seem to do anyting about it. However, adobe reader for PocketPC has the auto tag
-
Hello all, Here's the issue. I have an editable dropdown list/menu in a table. The table is hidden upon page load. When the user clicks the link to open the table, the editable drop down is only 1 or 2 pixels wide. How do I get the editable drop down