Time Machine disk is not unlocked automatically

I have a FileVault2-encrypted Time Machine disk connected to my MBA through a Thunderbolt display in my office (the disk is a Buffalo Thunderbolt drive).
When I leave the office, I eject the drive. put my MBA to sleep and disconnect it from the Thunderbolt display (the drive still connected to the display).
When I return in the morning I reconnect the display, wake up the MBA and log in. But then I always have to manually unlock the external drive with Disk Utility. Otherwise it won't show up in the finder and Time Machine won't make any backups. That's annoying, because I often forget this procedure and TM silently fails to make backups.
Is there a way to automatically unlock the drive when I login in the morning, just like it does when I reboot the computer?
(the passcode for the encrypted drive is in my keychain)

I have had trouble twice with TM, both occasions involving similar odd messages about available space. Once on OS 10.5 and once on Lion 7.1
Try:
http://web.me.com/pondini/Time_Machine/Home.html

Similar Messages

  • External Time Machine Disk Will Not Unmount

    This past weekend I did clean installs of Lion on new SSD drives in my MacBook and MacPro.  The MacBook backs up to a Time Capsule with Time Machine and is working perfectly.  The MacPro backs up fine and says the backup is completed but it will not unmount the external Time Machine disk I use for the backup after completion.  This was not a problem using the same setup with Snow Leopard.  I looked at the Console which says Backup completed successfully.  Any idea what is going on with this?  Thanks in advance.

    RecalcitrantRon wrote:
    The MacPro backs up fine and says the backup is completed but it will not unmount the external Time Machine disk I use for the backup after completion.
    Wait a minute . . . I missed that before. 
    Is that disk connected directly to the Mac?  If so, no, Time Machine doesn't unmount directly-connected drives after a backup, only sparse bundles on network drives.

  • TIme Machine - disk volume not showing in history

    I have time machine backing up my boot volume, and an external disk that holds my itunes library and iphoto data. The external drive has failed. I have a new drive to restore to, but when I look at the time machine history it no longer shows the old volume attached, it just shows the new one.
    Do I have to name the new disk, the same as the one that died? If so, is there a way to find that name (I don't remember what I called it).

    tbrinker,
    Well, it should be relatively easy to determine the name of the old volume, with a little bit of detective work. COnnect your Time Machine backup drive, and navigate it using the Finder. Inside the backup folder, you will find nested folders going back into the past. Find one that is named with a date that you know would have included the old iTunes/iPhoto volume, and open it.
    You will see at least two folder: One named for your startup volume, another for the iTunes/iPhoto volume. BINGO!
    Now, all you need to do is re-name the volume on your new external drive. For now, let's disconnect the Time Machine drive. Select the Desktop icon for the volume on your new external drive, and press <RETURN>. This should highlight the name for editing. Re-name it using the exact same name as the folder you found in your older backup (the name of your old iTunes/iPhoto volume), then press <RETURN> again to exit the "edit mode."
    With the now re-named volume still mounted, connect you Time Machine drive. When it is available, navigate in the Finder to the root of the new drive (not the Time Machine drive), then click the Time Machine icon in your Dock. You should now be able to go back in time to a point where the window you are seeing is populated with folders (namely, your iTunes and iPhoto libraries). When you find it, select everything, then click "Restore."
    Scott

  • My old backups on the Time Machine disk are not accessible.

    Hi everyone,
    I installed a fresh OS X Mountain Lion yesterday. I tried to use Migration Assistant (in the Utilities folder) for the first time, to migrate my old data from the Time Machine back-up disk.
    After almost 6 hours, my data was completely in place from the backup disk. In fact, the data was gotten from the latest version of backups as I expected. But now, when I go to Time Machine to browse my old backups, it seems that all backups are still there, detected by the Time Machine itself, but it is not possible to access any of them.
    In fact, selecting one of the past backups from the Time-Line on the right edge of the screen, has no effect. All the windows behind the current finder window in the Time Machine are also dimmed, seems that no backups are there. But the Time-Line on the right edge of the screen displays several items from the first backup on my disk to the latest which was for the day before yesterday.
    This is not what I expected from the Time Machine. I was so glad when the Migration Assistant read all my data from the backup disk and put them in place. But I did not expect to lose my old backups which are still there on the disk, but Time Machine behaviour is like the times where there are no backups.
    It is important to note that before migrating data using Migration Assistant, I was able to browse all my backups in the Time Machine. This was also one the great features of Time Machine, since I had a fresh OS installation, and all my data from the past were accessible in the Time Machine.
    I could also get my data one by one and restore them in-place using Time Machine but it was some how cumbersome.
    Now is there any one to let me know why this has happened? I Appreciate your time to write.
    Mani Hamedani

    Troubleshooting information:
    Time Machine Troubleshooting
    Time Machine Troubleshooting Problems 

  • Time Machine Disk Icon not Displaying Properly After Reconnect

    I'm noticing a little oddity that has been happening since I upgraded to Mavericks.  If I disconnect my Time Machine (TM) volume, then, reconnect it later and perform a backup, the disk icon on my desktop isn't changing to the green TM icon, it's still displaying as the orange Firewire icon.  I can correct this by opening the TM preferences, clicking "select disk" and, then, reselecting my TM volume.  The icon will, then, change and it will remain correct as long as the volume is connected.  Normally, the icon should change automatically when the first backup is initiated.
    Anyone else seen this and know why this might be happening?  I'm wondering if there might be something screwy with my TM preferences.  As a next step, I might try resetting TM (i.e. trashing the .plist file) and see if that fixes the behavior.
    This isn't affecting TM functionality at all.  TM is still working perfectly.  This is, at best, an annoyance.

    I suspect Apple took this funcionality out of Mavericks for some reason.  I'm running several Macs at our business, and they all are doing the same thing.

  • Time Machine disk not showing up in Migration Assistant

    I have backed up my Snow Leopard with Time Machine and I'm trying to import my stuff into Lion using Migration Assistant. However, my Time Machine disk is not showing up in Migration Assistant even though it's connected and shows in Finder. Any idea why?

    I couldn't migrate from Snow Leopard drive either -- Snow Leopard used PGP encyption, migration copied the files, but they seem inaccessible to Lion with "permission denied" errors.
    It sounds like you did migrate successfully. It's normal for the permissions to be wrong -- Migration Assistant creates a new account with the files from the old one.
    What I would do in your place is start over. First, decrypt the SL volume and uninstall PGP. You should do that anyway, because PGP is a turkey and not needed in Lion. Erase the Lion volume (assuming you have no data on it that isn't already on your SL volume), reinstall Lion, and then use Setup Assistant, not Migration Assistant, to do the migration.

  • Migration assistant does not see my time machine disk

    I had an issue with my hard disk on my imac in which I had to re-format and reinstall the OS. Since 10.7 is not available as a "rescue reinstall disk", I had to reinstall 10.6. When that finished, the install asked if I would like to transfer my stuff from Time Machine. I said "yes". Unfortunately, my time machine disk does not show up! Migration Assistant thinks my "macintosh HD" system disk is the only disk available as the time machine backup. So I skipped migration. I went ahead and did all of the OS upgrades to get back to 10.7.3. I re-connected all external disks (I have 4-the time machine disk included) and tried migration assistant again. The only disk migration assistant still thinks is available as the time machine backup is the macintosh HD system disk, not the one called "Time Machine Backup". Time machine backup is a western digital 2TB usb 2.0 disk.
    So....
    I decided this morning to re-do everything again (since I still could not get my data back). Guess what?!?! the same thing is happening! Migration Assistant thinks that the macintosh HD is the time machine disk and does not see any others - even though the disk is there and mounted!
    Please help! I would like my data back, but I am not able to pay Apple at the Apple store or a phone call to them for help!
    Thanks!
    Diana

    Diana Stephens wrote:
    Migration Assistant thinks my "macintosh HD" system disk is the only disk available as the time machine backup.
    Those are your backups.  Migration Assistant shows the name of the disk and system that were backed-up, not the disk they're on.  It will not show the disk you're running from.
    See the tan box in Using Migration Assistant on Lion.

  • Time Machine options are not working. I am unable to schedule automatic backups.

    Time Machine options are not working. I am unable to schedule automatic backups.  The On-Off button is grayed out. I can perform a backup manually.

    Thanks for responding.  I have an external disk with plenty of room.  It is used only for backup of my computer.  I get a backup by clicking on the Time Machine icon at the top of the page and select "Back Up Now."  When I click on Time Machine Preferences, there is a box labeled "Options" which allows me to exclude items from backup and notify after old backups are deleted.  There is no option to schedule a backup.  The "OFF/ON" box is gray.  For "Next Backup:" it says "Automatic backups off."  I would like to turn it on.

  • Time Machine Problems - Won't Launch Automatically, Won't Mount Disk Image

    Hi there,
    I have a MacBook Pro (Mid 2009) running OSX Mavericks 10.9.2.  I've had Time Machine running successfully with a 2TB Time Capsule for some time.  Recently, I reinstalled Parallels VM software and have been having issues with Time Machine ever since.  Initially, I had TM backing up the Virtual Machine, but decided that wasn't a great way to go, so turned it off in the VM configurations pane.
    Since then, however, I have been unable to successfully back up my MacBook.  I notice a few things:
    The Time Machine drive does not mount as it used to.  It does not show up on my desktop.
    When I go into Time Machine Preferences, the drive does not show the usual green disk icon.  The icon is blue and has the stick-figure people on it.
    I can remove the blue disk drive, and re-select the drive.  It stays green for about 30 seconds, then converts to the blue icon.
    I get a number of plist errors in the Time Machine dashboard app.  Here's the latest feed:
    Property list invalid for format: 200 (property lists cannot contain NULL)
    Property list invalid for format: 200 (property lists cannot contain NULL)
    Property list invalid for format: 200 (property lists cannot contain NULL)
    Starting manual backup
    Network destination already mounted at: /Volumes/Sean's Time Capsule
    Disk image /Volumes/Sean's Time Capsule/Sean's MacBook.sparsebundle mounted at: /Volumes/Time Machine Backups
    Backing up to /dev/disk2s2: /Volumes/Time Machine Backups/Backups.backupdb
    Backup canceled.
    At this point, I'm a bit stumped.  I've tried deleting the old sparsebundle, I've reset the Time Capsule, and I've come up with no ideas as to how I can get this woring again.  It seems like the property list needs 'something' but can't find the old file or the property list is corrupt or something.  I'm assuming that is why the Time Machine disk image won't mount?
    Thanks for your help - suggestions are welcome!

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
    Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[45]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}')printf("%s (UID %s) is using %s '${p[$2]}'\\\\n",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ s/ *:$//;x;s/\n//;/Apple|Genesy|Intel|SMSC/d;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;} ' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/:/;END { if(NR<100)print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { $4="";gsub("  "," ");gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}')print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR==2'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' ' s/^.{52}//;s/ .+//p ' ' /Launch[AD].+\.plist$/;END{if(NR<100)print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' '/\.(framew|lproj)/d;/plist:|:.+(M.+exec|scrip)/s/:[^:]+//p' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/;END{if(NR<100)print "/System/"};' '/^\/usr\/lib\/.+dylib$/p' '/\/etc\/(auto_m|hosts[^.]|peri)/s/^\.\/[^/]+//p' ' /\/(Contents\/.+\/Contents|Frameworks)\//d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a)print "CPU: "a;if(b)print "I/O: "b;if(c)print "Net: "c" (KiB/s)";if(d)print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' /lR/ { if($2<='${p[25]}')print $2;} ' ' BEGIN { FS=":";} $3~/(sh|ng|ic)$/ { n=split($3,a,".");sub(/_2.+/,"",a[n-1]);b=b"\n"$2" "a[n-1]" "a[n]" "$1;c=c$1;} END { d="sort|tail -n'${p[38]}'";print b|d;close(d);if(c)print("\n\t* Code injection");} ' ' NR!=4{next} {$NF=int($NF/10240)} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L)f=f"\n   "$0;} END { F=FILENAME;if(!F)exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(A.+ E.+ text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' /:/{$0="'"${p[28]}"'"};1;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status '-F bsd -k Sender kernel -k Message Req "Beac|caug|dead[^bl]|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN" -k Message Rne "Goog|ksadm|SMC:" -o -k Sender fseventsd -k Message Req "SL"' '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/*/*.{BS,Bas,Es,OSXU,Rem}*.bom' '{/,}L*/Lo*/Diag* -type f \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;' '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto_master,{cron,fs}tab,hosts,{launchd,sysctl}.conf} /usr/local/etc/periodic/*/* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n 'syscall::'${p[33+j]}':return {@out[execname,uid]=sum(arg0)} tick-10sec {trunc(@out,1);exit(0)}'";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP RSSI Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear;};for i in 0 1;do eval ' A'$((1+i))'() { v[0]=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "${v[0]}" ]];};A'$((3+i))'() { v[0]=` while read i;do eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "${v[0]}" ]];};A'$((5+i))'() { v[0]=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "${v[0]}" ]];};';done;A7(){ v[0]=$((`date +%s`-v[3]));};B2(){ v[$1]="${v[0]}";};for i in 0 1;do eval ' B'$i'() { unset v[0];((v['$((i+1))']==0))||{ v[0]=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v[0]=` paste -d: <(echo "${v[$1]}") <(echo "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v[0]=`grep -Fv "${v[$1]}"<<<"${v[0]}"`;};C0(){ test "${v[0]}"&&echo "$_";};C1() { [[ "${v[0]}" ]]&&printf "${f[$1]}" "${l[$2]}" "${v[0]}";};C2() { v[0]=`echo ${v[0]}`;[[ "${v[0]}" != 0 ]]&&C1 0 $1;};C3() { v[0]=`sed -E "${s[0]}"<<<"${v[0]}"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;A0;{ A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D22 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A4 14 6 11 0;B2 0 5;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A4 14 7 11 6;B2 0 7;B3 4 0 22;A4 14 6 11 0;B2 0 8;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D23 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;D22 32 31 43 38;D23 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-  
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    7. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    8. If you see an error message in the Terminal window such as "syntax error," enter
    exec bash
    and press return. Then paste the script again.
    9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Time Machine disk not recognised

    My G5 PowerMac has been away for repair; it's needed a new logic board. It was away for nearly two weeks. Now Time Machine doesn't recognise the external drive which contains the Time Machine backups from last November. It wants to do a backup from scratch and says there isn't enough space on the disk.
    Is there any way of getting the Time Machine to recognise the previous backups and start adding to them?
    I'll be very grateful for any advice.

    To TM, it is a different computer. The logic board includes your Ethernet "Mac Address", which is a unique number that TM uses to be sure it knows which Mac is which.
    There is a fairly elaborate way to attempt to persuade TM that the existing backups really are for your "new" Mac: http://www.macosxhints.com/article.php?story=20080128003716101
    It is very easy for the inexperienced user of Terminal (and the not-so-inexperienced as well) to make an error with Terminal, get no error message, and have it not work, so try it at your own risk.
    But there is an alternative: hold down the Option key while selecting the TM icon in your Menubar. The +Enter Time Machine+ option changes to +Browse Other Time Machine Disks.+ That's a bit misleading, but it will take you into the normal TM interface where you can see and restore from the old set of backups.
    Even if you're successful with the Terminal work, your first backup with the new logic board may be a full one -- every file and folder on your system. If TM decides to do that, you cannot prevent it.
    So if your TM disk/partition isn't at least 2.5 times the size of the data it's backing-up, your best bet may be to just erase it with Disk Utility and let TM start over.

  • ISO x 10.8.3 migration assistant will not recognize time machine disk

    I recently had my computer wiped clean by Apple genius bar.  After updating the ISO X 10.8 software to 10.8.3, I attempted to restore files from my Time Machine backup to the computer.  Unfortunately, the migration assistant would not lock onto the Time Machine disk, as if it were not there. What can I do to restore my original files back into the repaired computer?
    My imac was purchased new in December of 2008 and the back up disc was connected to it in Aug 2009.  I think the original operating system was pre Snow Leopard - the only CD I have and dated 2010.

    I am conserned about restoring using setup assistant because I need to transfer personal files and applications only.
    You can do that in Setup Assistant.
    Migration Assistant doesn't accept Time Machine backups of the computer it's running on; it only accepts compatible backups of other computers. You can't migrate a system to itself. To restore files from the same computer, enter Time Machine in the usual way, or else boot into Recovery and either restore the whole startup volume or erase, reinstall OS X, and restore in Setup Assistant.

  • OS X Lion does not boot when my Time Machine disk is connected

    Everytime I boot or reboot my MacBook Pro I am stuck at the grey screen and OS X Lion will not boot. When I disconnect my Time Machine disk (external disk connected via usb) I suddenly get the loading screen and OS X Lion boots properly.
    Pretty anoying I think, does anyone have a solution for this problem?

    Have a look at the boot log messages, using Console.app (also with the "dmesg" command), and see if there's a clue there, or, set the boot process logging to "verbose" (i.e., using TinkerTool System) and find out what's really going on live at boot time.  (Also, do you have BootCamp setup, or any ofther bootable partitions?)
    Hope this helps.

  • How do I unlock my external hard drives one has photos on them one is trying to run time machine and is not able to complete a basck up.

    How do I unlock my external hard drives one has photos on them one is trying to run time machine and is not able to complete a basck up.

    VK said for locked HDs and volumes at http://discussions.apple.com/thread.jspa?threadID=2329689
    sudo chflags 0 /volumes/*
    sudo chmod a+rx /volumes/*

  • Time Machine - Browse other Time Machine disk - not showing all files

    I have an Xserve, running 10.6 server, where we keep all of our files. It backs up via Time Machine. Many users use the shared drives on the Xserve, and I encourage them to put their files there. We work in a design / production house, so many people collaborate on files. Due to the nature of the business, with frequent design changes, we need to go "back in time" and pull out previous versions of designs, etc. Usually I handle this by remotely accessing the Xserve, starting up time machine, and pulling out the old versions of files from the backups.
    However, when I'm not in, I wanted to make this option available to another user, without giving her full access to the server. I discovered the "Browse Other Time Machine" option, and after making my Time Machine disk (actually a rack-mount Mercury Pro RAID array) shared, I was able to mount it on her Mac, also running 10.6. I thought this would be a nice solution.
    The problem is, in some directories, when browsing from her computer, Time machine is showing no backups. It's impossible to go back more than a few snapshots with it. Meanwhile, if I do it on the server, everything is fine. So I thought perhaps it was a permissions issue, but I don't want to muck up the permissions on my time machine drive and risk losing everything. I did add her account as a user with read-only access to the time machine drive, and told it to apply to all sub folders. This didn't make any difference.
    What is the issue? Is it permissions? Or is my Time Machine too large (6TB) that it can't load all the data over the network? Has anyone encountered this before? What is the best way to troubleshoot?

    If you still have the old imac connect tbe two with an ethernet cable and use migration assistant. Move your data to a new Mac - Apple Support

  • "Time Machine Backups" could not be unmounted (Disk Utilities)

    Hi there,
    I am having an error message when trying to back up time machine.  Therefore I went to disk utilities and verified disk.. said it needs to be prepared.  When I try to repair time machine, i then get the following message "The disk “Time Machine Backups” could not be unmounted".  I tried again and then it says its been repaired.  so when i tried a backup of time machine i get "time machine error.  unable to complete backup. an error occurred while copying files to the backup volume"
    I have installed "Time machine buddy" and I am getting"error reading system logs"
    I have a mac osx 10.5.8. No antivirus or spotlight running that i know of.
    Any ideas?

    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode, see if external Drive can be repaired...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    Open Console in Utilities & see if there are any clues or repeating messages when this happens.

Maybe you are looking for