Time Machine does not create req'd file and fails. Restart provides a fix until the problem recurs.

Previous replies are omitted to reduce excess data.
Latest reply from Pondini is as follows:
You're still having a problem with Apple's old Backup app (with the umbrella icon).
It should be sending a message when that happens; (it does)if not, make sure you have the current version (3.2). If not, it should be available in the Softwarefolder on your iDisk, or here: http://support.apple.com/kb/DL1025.
If you do, start Backup, double-click the Plan in question, select the Historytab, then double-click the date/time of the backup in question to see the log. The error message should be towards the end.
Following the above instructions from Pondini produces this entry in the Backup App log:
Connected to MobileMe
Beginning a new Full Backup...
Begin backup at 2011-12-08 08:14:49.369 -0500
Scanning files...
Acquired a destination for the backup.
Copied part 1 of file /Users/wpiez/Pictures/iPhoto Libraryb.zip
Unable to upload to /Backup/iPhoto Libraryb - 2011.12.08-08.14.49.369 - Part 1.FullBackup on iDisk
End backup at 2011-12-08 09:54:02.905 -0500
I am guessing Backup did not backup the file iPhoto Libraryb.zip because the same file was already on iDisk. This somehow leaves a deadend trap in Time Machine.
Have checked and found my Backup App is version 3.2. Have changed my Backup instructions to work only manually. Am hoping not running it will avoid creating problems in Time Machine. Latter working OK after restarting.
As an aside I think I will miss iDisk when Apple stops it. If my house burns down taking my computers, my hard drive, my separate hard drive dedicated to backups and my disk backups, it would be nice to have replacements offsite. Maybe will decide to engage a non-Apple service for that.
Thanks to Linc D and Pondini and other anonymous rreaders and thinkers.

William Piez wrote:
Unable to upload to /Backup/iPhoto Libraryb - 2011.12.08-08.14.49.369 - Part 1.FullBackup on iDisk
Hi, again,
Are you signed-on to Mobile Me, via System Preferences > MobileMe > Account? If not, do so. If you are, sign out for a few moments, then back on. Then try again.
Have changed my Backup instructions to work only manually. Am hoping not running it will avoid creating problems in Time Machine.
Not necessary. The two are unrelated (except for Backup delaying a scheduled backup if a Time Machine backup is running). I run both myself, with no problems, and my Backups are scheduled.
As an aside I think I will miss iDisk when Apple stops it. If my house burns down taking my computers, my hard drive, my separate hard drive dedicated to backups and my disk backups, it would be nice to have replacements offsite. Maybe will decide to engage a non-Apple service for that.
I agree. Apple doesn't seem to have anything else at the moment. Many folks are switching to DropBox.

Similar Messages

Time Machine does not see original backup file on Time Capsuel after reset.

I recently moved. I have a Time Capsule which is also my airport base station. I have about 7 months worth of back-ups on the drive for an iMac and a MacBook. The local cable company would only hook up the modem directly to my iMac and would not set up through the Time Capsule as it is not one of their routers. No problem. I did it once -- I could do it again. After discovering that it was not as simple as plugging the ethernet cable into the Time Capsule (after doing so, the Time Capsule recognized it had internet feed -- the iMac recognized the Time Capsule/Airport network -- but I could not get onto the net.) I discovered that I needed to do a hard reset. The instructions said the files would not be erased. They were not. I can still see the original back-ups for both computers in finder. But Time Machine does not recognize that either computer was ever backed up. There is no history and when I try a back-up it begins from scratch and creates a brand new back-up file.
How do I get Time Machine to recognize the original back-up files? I tried "choosing disk" in Time Machine preferences but it only lets me choose the actual disk (the Time Capsule) and not an individual back-up file
Thanks in advance to the collective brain trust.
Robert

I saw a post on another discussion about this subject, and one user found this workaround:
2) Start the backup via wireless connection. Stop the backup. Unplug external HD and plug in via USB or FW (you want FW800). Time Machine appears smart enough to continue your backup in a manner that is useable by the AEBS.
This only makes sense for the first backup (or if you have a lot of data for one particular incremental backup), as it removes the whole convenience factor of wireless.
The post got this reply:
Thx for your #2 tip on using Time Machine with an Airport Extreme Base Station, then switching to a wired connection. Worked perfectly.
Started the TimeMachine b/up wirelessly, allowed it to run for a couple minutes, then stopped it, unplugged the USB drive from the AEBS, plugged it into the computer directly via FW400, opened TimeMachine and it recognized the Disk. Ran TimeMachine via the wired connection, after it finished I ejected it, plugged it back into the AEBS, initiated the AirDisk in the finder, then opened TimeMachine and presto!!
Awesome tip. Note: this works for first-time TimeMachine wireless backups only. Saved me over 40 hours of wireless waiting!!
http://gizmodo.com/370017/how+to-use-time-machine-with-an-airport-extreme
Can anyone confirm that this will work?

Time Machine does not see back-up file on Time Capsule

I recently moved. I have a Time Capsule which is also my airport base station. I have about 7 months worth of back-ups on the drive for an iMac and a MacBook. The local cable company would only hook up the modem directly to my iMac and would not set up through the Time Capsule as it is not one of their routers. No problem. I did it once -- I could do it again. After discovering that it was not as simple as plugging the ethernet cable into the Time Capsule (after doing so, the Time Capsule recognized it had internet feed -- the iMac recognized the Time Capsule/Airport network -- but I could not get onto the net.) I discovered that I needed to do a hard reset. The instructions said the files would not be erased. They were not. I can still see the original back-ups for both computers in finder. But Time Machine does not recognize that either computer was ever backed up. There is no history and when I try a back-up it begins from scratch and creates a brand new back-up file.
How do I get Time Machine to recognize the original back-up files? I tried "choosing disk" in Time Machine preferences but it only lets me choose the actual disk (the Time Capsule) and not an individual back-up file
Thanks in advance to the collective brain trust.
Robert

I recently moved. I have a Time Capsule which is also my airport base station. I have about 7 months worth of back-ups on the drive for an iMac and a MacBook. The local cable company would only hook up the modem directly to my iMac and would not set up through the Time Capsule as it is not one of their routers. No problem. I did it once -- I could do it again. After discovering that it was not as simple as plugging the ethernet cable into the Time Capsule (after doing so, the Time Capsule recognized it had internet feed -- the iMac recognized the Time Capsule/Airport network -- but I could not get onto the net.) I discovered that I needed to do a hard reset. The instructions said the files would not be erased. They were not. I can still see the original back-ups for both computers in finder. But Time Machine does not recognize that either computer was ever backed up. There is no history and when I try a back-up it begins from scratch and creates a brand new back-up file.
How do I get Time Machine to recognize the original back-up files? I tried "choosing disk" in Time Machine preferences but it only lets me choose the actual disk (the Time Capsule) and not an individual back-up file
Thanks in advance to the collective brain trust.
Robert

I had a repair done at the apple store where the replaced my hard drive and copied my other hard drive over to the new one. Everything is fine except the time machine wont reconnect to my old file and is trying create a new file but not enough space?

I had a repair done at the apple store where the replaced my hard drive and copied my other hard drive over to the new one. Everything is fine except the time machine wont reconnect to my old file and is trying create a new file but not there is not enough space for both files files? Do I need to do something to have it continue to update my old file instead of recreating a new one?

Depending on what version of OSX you're running, and how the data was transferred, you may be out of luck.
If you're running Lion, and your backups were made to a directly-connected external HD (ie, not a Time Capsule or other network location), you may be able to get Time Machine to "associate" the new disk with the old backups. See #B6 in Time Machine - Troubleshooting, especially the pink box there.
If you're running Snow Leopard, you might be able to do a full system restore of your backups to the new HD. See Time Machine - Frequently Asked Question #14 for detailed instructions. That should leave a "trail" that Time Machine can follow to "associate" the new drive with the old backups. Unfortunately, that doesn't always work, and there's no way to do it manually, as there is with Lion.

Time Machine does not backup all files

I recently did a clean install and to my horror i can see that Time Machine does NOT back up all my files.
It seems to be worst in my music library which fortunately is pretty easy to rebuild do to itunes index.
But is there any way to make sure that Time Machine does in fact back up all files?
Or is it just broken and should be avoided?
I have 1,5 year old Macbook Pro Retina 15 inches 500 GB SSD

If you use the third-party application "Dropbox," you may see files in the Finder that are not present locally, but are actually on a network server. Those files won't be backed up and won't appear in Time Machine, even though they show in a Finder window. If the files in question are in a Dropbox folder, disable the software or refer to its developer for support.
Continue only if you've ruled out Dropbox or any similar product as a possible cause of the issue.
Open the Time Machine preference pane and unlock the settings, if necessary. Click the Options button. If there is one particular folder with items that are not being backed up reliably, add it to the list of excluded items. If there are many such folders, add your home folder to the list, or add a whole volume (i.e., what Apple calls a "disk.") Save the changes.
Start a backup, or wait for one to happen automatically. When it's done, open the preference pane again and remove the exclusion(s) you made earlier. Back up again and see whether there's a change.

Time Machine does not backup all of my files

Hi,
If I compare my Dropbox folder to what Time Machine backups there are differences which means that Time Machine does not backup all files:
diff <(cd "/Users/phil/Dropbox" && ls -R | sort) <(cd "/Volumes/TimeMachineBackup/Backups.backupdb/Computername/Latest/Macintosh HD/Users/phil/Dropbox" && ls -R | sort)
There are also differences if I compare my user folder to the Time Machine Backup:
diff <(cd "/Users/phil/" && ls -R | sort) <(cd "/Volumes/TimeMachineBackup/Backups.backupdb/Computername/Latest/Macintosh HD/Users/phil/" && ls -R | sort)
I did not exclude the folders affected from the Time Machine backup.
I have verified this behaviour on other computers as well.
Does anybody else have this kind of problem?
Philipp

These commands solved the problem for now:
1) Stop the Dropbox desktop application (if needed)
- Click on the Dropbox icon.
- Choose Quit/Stop/Exit
2) Open your Terminal app (Located at /Applications/Utilities/Terminal)
3) Copy and paste the following lines into the Terminal, one at a time, and press RETURN after each one. PLEASE make sure you copy and paste these commands (don't type them by hand), as getting them wrong could cause some harm. You'll be prompted for your computer user's password (not your Dropbox password) after entering the first command. Keep in mind that the password field in the terminal will remain blank as you type your password. After you type it, just press ENTER.
sudo chflags -R nouchg ~/Dropbox ~/.dropbox ~/.dropbox-master
sudo chown "$USER" "$HOME"
sudo chown -R "$USER" ~/Dropbox ~/.dropbox ~/.dropbox-master
sudo chmod -RN ~/.dropbox ~/Dropbox ~/.dropbox-master
chmod -R u+rw ~/Dropbox ~/.dropbox ~/.dropbox-master

Time Machine does not back up all iTunes music files

Hello, I'm trying to view the music files, on my Time Machine backup disc, from a CD that I recently imported into iTunes. My iTunes library resides on my hard drive. The backup disc shows files for some of the other music that is in my iTunes library, but not from the new CD. I did several backups after importing the new music, but the song files still do not show up in Time Machine. Any ideas for why the files don't show up?
My ultimate aim is to copy those music files onto another computer, but my research on the support pages suggests that I should not do it this way. Instead, I will copy the music files onto another disc (not using Time Machine) and then import them onto the other computer. Please confirm that this is the best way to proceed.
But in the meantime, I'm wondering why Time Machine does not show my newly imported music.
Thanks very much for any help you can provide.

New formulation of my question:
A file dated at 10:00 may not appear in the back-up dated 11:00.

I recovered my back up via a wired connection. now Time Machine does not recognise older back ups wirelessly and wants to do a first back up

I recovered a back up from my time machine via a wired connection after getting the 'white screen of death'. Now Time Machine does not recognise any back ups on the time machine when connected wirelessly and wants to do a first back up of the whole machine. How do I get my mac to recognise these older back ups? It connects to the wifi network the time machine creates fine, with the same name and password.

I recommend the following.
1. Reset the TC to factory.
Universal Factory Reset.. any model TC or AE.
Unplug your TC/AE from power or turn off at the power point.
Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Note..
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
2. Rename the TC to SMB standard.
That means short names.. 2-20 characters but less than 10 is excellent. eg TCGenx (use number for x that is actual generation of the TC)
No spaces.
Pure alphanumeric. No apostrophe.
3. Ensure IPv6 is set to link-local..
Do the same thing for ethernet if that is used.
4. Manually mount the TC disk in Finder.
Use Go in the top menu.. connect to server.
Type in
AFP://TCname.local (where TCname is your new short name for the TC and local is default domain .. it helps using the domain I found).
You will then find the computer either can or cannot find the network resource.. if it fails something else is wrong with the actual network and you will need to fix that.
It will request the password if it is found.. password is public by default unless you changed it.. type in the password and check to keep it in your keychain.
5. Delete current TM setup and redo it with the newly named TC.
See A4 here. http://pondini.org/TM/Troubleshooting.html
If your backups cannot be found, try B6 again, now that you actually know that the disk has been properly discovered.

Time machine does not open? I have already restarted the mac.

Hi,
time machine does not open/start.
It does create backups but does not open the programme itself.
I tried already a restart - but this did not help.
Peter

Try the things in #E4 of Time Machine - Troubleshooting

Time Machine does not work after installing mavericks

After I installed maverick on my imac, my time machine backups don't work anymore!!!!
I have a normal portable HDD attached to my Imac with time capsule backup from before mavericks was installed.
I also has a Buffalo NAS as a second Time Machine Backup.
TIme capsule does not recognise my Buffalo NAS and tells me that it is not available. It has previous backups from Mountain Lion for sure!
My portable HDD keeps saying "Preparing for backup" for eternity.
Please, APPLE, what is going on with mavericks? Regretted upgrading.
My backup is 31 days behind because of this! Unacceptable!
But what is strange is that I can connect to my portable HDD and Buffalo NAS as a drive. What I have been doing is to copy and paste the important stuff into the drives. But it really defeats the purpose of time machine, right?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Since installing Lion, I have not been able to utilize Time Machine (does not recognize the back-up drive); my wireless mouse does not function properly; I have experienced unreasonable delays in the system. Is there a fix or upgrade coming?

Is there a fix or upgrade to deal with the many problems I am experiencing since I installed Lion? I can no longer utilize Time Machine (Does not see the back-up drive); my wireless mouse does not work properly; my iMac has slowed down considerably. I am reminded of having a PC machine again. Bummer!

Either downgrade to Snow Leopard or try reinstalling Lion.
Reinstalling Lion Without the Installer
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

Time machine does not backup anymore

Hello all,
I've been using my time machine for a month now, I kept it turned off and only connected the disk when I wanted to make a backup. Then I just hit Back Up Now from the menu and it always backed up everything (I used to check it afterwards). FYI, I've got a 500GB drive and for backups I use a 500GB partition on an external disk, where about 100GB is still free. All of a sudden, my time machine does not backup anymore. It does its run, whether a scheduled hourly one when turned on, or an on-demand one, but it only lasts a split second as though there is nothing to backup and when I enter the time machine, the files are really missing. I can't make it backup anything anymore. What is going on?
thanks everyone

cukerko wrote:
Hello all,
I've been using my time machine for a month now, I kept it turned off and only connected the disk when I wanted to make a backup. Then I just hit Back Up Now from the menu and it always backed up everything (I used to check it afterwards). FYI, I've got a 500GB drive and for backups I use a 500GB partition on an external disk, where about 100GB is still free.
It's not related to this problem, but that may not be large enough. What's important is not the size of your internal HD, but how much is on it (or is expected to be on it in the next year or so). It varies widely, of course, depending on how you use your Mac, but Time Machine usually needs 2-3 times the space of the data it's backing-up.
. . . it only lasts a split second as though there is nothing to backup and when I enter the time machine, the files are really missing.
That sounds like the year-old unfixed bug detailed in red in #D5 of [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum).

Save as does not Create PDF Compatible File even when the creare pdf compatible files is on, Illustrator CC 2014

save as does not Create PDF Compatible File even when the creare pdf compatible files is on, Illustrator CC 2014

When I open is adobe acrobat I get this message.
"This is an Adobe® Illustrator® File that was
saved without PDF Content.
To Place or open this le in other
applications, it should be re-saved from
Adobe Illustrator with the "Create PDF
Compatible File" option turned on. This
option is in the Illustrator Native Format
Options dialog box, which appears when
saving an Adobe Illustrator le using the
Save As command."

How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

Time Machine does not see my external HD

I would like to setup TM but it does not see my external HD, but I can see it on desktop in and finder. I can browse it. But time machine does not see it and forces me to use airport time capsule but I don't have it. Help please.

What format is the external drive in?
If it's formatted for Windows (either using the MBR partition table or using FAT/NTFS volumes) then Time Machine cannot back up to this disk.
The disk needs to be formatted as Mac OS X Extended using either the APM or GPT partition tables.
Life is complicated somewhat by the fact that the OS, in general, can read MBR/FAT drives, but they're not suitable for Time Machine (limitations in the disk formats prevent some of Time Machine's features from working).
You can check the current partition map/disk format in Disk Utility.app - just select the disk on the left and the information will be displayed below. If the disk is using MBR and/or FAT then you'd need to reformat the drive in order to use it with Time Machine.

Time Machine does not create req'd file and fails. Restart provides a fix until the problem recurs.

Similar Messages

Maybe you are looking for